Gebruiksaanwijzing /service van het product DTC300 van de fabrikant FARGO electronics
Ga naar pagina of 446
DTC400 /DTC300/DTC300M C ard Printer Service Manual (Rev. 1.3) Part Numbe r: L0005 33.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) ii DTC400/ DTC300/DT C300M Card Prin ter Service Manua l (Rev. 1.3), pro perty of Fargo Electronic s, Inco rporated Copy right 2003, 200 4, 200 5, 2006 by Fargo Elec tronics, Inco rporated .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) iii Table of Contents Sec tion 1: Introduct ion _______ _________ ____________ _________ _.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) iv Insta lling Blank Car ds into the Card Ho pper ____________________ ________________ __.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) v Rev iewing D TC400, DTC300 and D TC300M Printe r Dr ivers _________________ ____________.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) vi Rev iewing the IS O Track Loc ations__________________ _________________ ______________.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) vii Cleaning the P laten a nd th e Card F eed R ollers ___ __________________ ____________.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) viii Replaci ng the Fl ipper Table Modu le Assembly (D900200) _________________ __________.
Section 1: Introduction How to use th e manual The D TC4 00/DTC 300/D TC30 0M Car d Pri nter S ervi ce Man ual (R ev. 1.3) is, in fa ct, t he tro ubles hoo ting a nd ser vice manu al fo r the e ntire card Pr int er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 1 - 2 Safety Messages (re vie w carefully) S y mb ol Criti cal Instru ct ions fo r Saf et y purpo ses Danger: Failure t o follo w these i nstallation g uidelines can res ult in death or seri ous injury .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 1 - 3 DTC400/DTC300/D TC300M Card Printer O vervie w Reviewing the DTC400/DTC300/DTC300M B.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 1 - 4 Reviewing the DTC400/DTC300/DTC300M Sequence of Operations The following sequence desc ribes a full color print job with magne tic enco ding.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 1 - 5 Reviewing the DTC400/D TC300/DTC300M Sequence of Operati ons (continued) Ste p Pro cess Ste p Pro cess 5 The Pr int Ribbon Drive engag es.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 1 - 6 Reviewing the DTC400/D TC300/DTC300M Sequence of Operati ons (continued) Ste p Pro cess 23 The Card Feed Stepper Moto r engages to queue card for magnetic enc oding.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 1 - 7 Reviewing the DT C400/DTC300/DTC300M Boot u p Seq uence Step Pro cess 1 On P ower u p, the Print er che ck s the cu rrent stat e of t he Car d Feed Sens or and the He adlift Sen sor.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 1 Section 2: Specifi cations The purpos e of this section is to provide the User with .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 2 Regulatory Compliances Term Des cripti on CSA The Pri nter manuf act urer has bee n aut hori zed b y U L to rep resent the Ca rd Printe r as CS A Certifi ed under CSA Sta ndard 22 .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 3 A gency Lis ting s Term De scripti on EMC Standa rds CE, FCC, CR C c1374, BSMI, ITS (EN 55022 Cla ss B:1998 , FCC Clas s B, EN 550 24: 1998) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 4 Techni cal Spe cific ations ( continu ed) Ty pe Descri ption Card Inp ut Hopper Capacity 100 cards (30 mi l) Colors DTC4 00/DTC3 00: Up to 16.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 5 Techni cal Spe cific ations ( continu ed) Ty pe Descri ption Prin t Speed Print Spee.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 6 Visu al Secu rity Solution s (Spe cificati ons) VeriMar kTM C ards - 2-D ho logra phic f oil appl icati on VeriMar kTM Cards are a low cost, custo mized 2-D hologra phic foil applic ation, that is made in two steps.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 7 VeriMar kTM - A pplicatio n Spec ificatio ns VeriMar kTM fo ils w ill cover a di mensional area o f 1.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 8 Functional Specificati ons This Ca rd Printer utilizes tw o different , yet close ly related printing techno logies to achieve its rem arkable direct- to-card p rint qu ality for dy e-sublimation and resin thermal transf er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 9 Printe r Com pon ents: Front Cov er to USB P ort Compo nents Descr ipti on Front Co ver Opens to allow access to the Ribbon Ca rtridge.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 10 Prin ter Compone nts: Prin t Ribbons The Card Printer ut ilizes bo th dye-subli mation an d/or resin therma l transfer methods to print imag es direct ly onto blan k cards .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 11 Printer Com ponents : Res in-On ly Pr int Ribb ons Resin-on ly Print R ibbons cons ist of a con tinuous r oll of a sing le resin co lor.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 12 Printer Com ponents : Dy e-Sublim ati on Print Ribbo ns Not e tha t the Pr int er requi re s both s peci alize d and auth orize d Pri nt Ri bbons in or der t o print and function p roperly .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 13 Printer Com ponents : Dy e-Sublim ati on/Res in Print Rib bons Ty pe Descri ption D.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 14 Printer Components: Blank Cards Ty pe Descr iption Card Siz e The Card Printer ac cepts standard C R-80 sized and 20 mil . cards (3.37 0"L x 2.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 2 - 15 Print er Mo du le: Flipper Table Module A ssembly (D9002 00) The Fl ipper Tab le Modul e Assemb ly (D900 200) i s an auto mated Fl ipping Module tha t allows the Printer to print on the fronts ide and ba ckside o f each card .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 3 - 1 Section 3: Secure Print Security Suite O ver vi ew SecureMa rk is a multi-facet ed security solution that has bee n designed for Fargo Electronic s, our Imp ort Sup pliers, thei r Integrato rs and our Printer cus tomers.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 3 - 2 Print S ecur ity Sui te – Ma in Windo w Here are the icons for the five (5) app lications within the P rint Securi ty Suite.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 1 Section 4: Setup and Inst allat ion Procedure s The following gu ide will w alk you through the installa tion of the DTC400/D TC300/DTC30 0M Card Printe r Driver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 2 Insta lling the P rinter Driv er _________________________ ___________________ _____.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 3 Printer Setup and Installati on Choo sing A Good Lo cation Follow thes e guide lines: • Place the un i t in a location with adequa t e air c irculation to preven t internal heat build up .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 4 Unpac king a nd Ins pecti on W hile u npacki ng your Print er, insp ect t he car ton to ensur e that no dam age ha s occu rred duri ng sh ippi ng.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 5 Rev iewing the Print er (fr ont v iew; C artridg e bein g inst alled) Reviewin g the.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 6 Connectin g the Printer power Foll ow t his pr oced ure. ( Note: Do not conne ct the Printe r’s USB cable unt il prompted du ring the P rint er Dri ver inst allat ion.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 7 Instal ling the Print Ribb on Car tridge The F ar go DT C400/D TC3 00/D TC3 00M C ard Pr inte r uses a on e-pi ece, dispo sab le Ri bbo n Cartridge load sy stem.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 8 Ins tall ing the Print Ri bbon C artr idge ( continue d) Step Proce dure 2 a. Rem ove the line r on the Ca rd Cl eani ng R oller bef ore ins tall ing the C artri dge, as show n in Disp lay A (upper right arrow of displa y).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 9 Ins tall ing the Print Ri bbon C artr idge ( continue d) Display B – Shows direction that Cartridg e is inserted in the Printe r.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 10 Inst allin g Bla nk Car ds int o the Car d Ho pper The Farg o DTC400 /D TC300/DTC300 M Printer is capable of p rint ing single load card s and mult ipl e fee d car ds (bat ch mo de).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 11 Installing Blank Cards in to the Card Hopper (continued) Display B - Press the Card Hopp er Load Le ver dow n. Inser t the cards. Here the Lever is s till up.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 12 Installing Blank Cards in to the Card Hopper (continued) Here are the cards ready to insert.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 13 Lower ing t he C ard Ou tput Hoppe r Step Proce dure 1 The Farg o DTC400 /D TC300/DTC30 0M co mes with a Card Ou tput Hopp er (to hold card s a f ter th ey have bee n print ed).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 14 Flipper Table Module Installati on Additional , related links are provided below : • See the Flipper Table M odule Asse mbly Problems procedur es.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 15 Installing the Flipper T abl e M odule A sse mbly (D900200) (continued) Step De scrip tion 3 Rem ove t he C ard O ut put or Exi t Do or (D 90 0092) and Left End C ap (D 900064 ) to the Pr inter, as sh own below .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 16 Installing the Flipper T abl e M odule A sse mbly (D900200) (continued) Step De scrip tion 4 a. Remove the Cover from the Flippe r Table Modu le Assembly (D900200), as show n below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 17 DTC400 Card Printer /Encoder Card Flipper Module Upgrade Kit This sec tion provi des dire cti ons o n add ing a C ard Fli pper M odul e to your exi sti ng DTC 400 Card Printe r/Encoder.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 18 Instal ling the Card Flip per Mod ule Upgr ade Kit Step Proce dure 1 Disc onn ect t he P rint er’s power s uppl y. Step Proce dure 2 Use a No .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 19 Installing the Card Fli pper Module Upgrade Kit (continued) Step Proce dure 3 Firmly grasp the Card Exit Hop per and pu ll on on e side to pop out the p ivot pin from its mount hole .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 20 Installing the Card Fli pper Module Upgrade Kit (continued) Step Proce dure 5 Pivot the lower end of the Ou tput Cover in an outw ard m otion to remo ve the Out put C over.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 21 Installing the Card Fli pper Module Upgrade Kit (continued) Step Proce dure 7 Plac e the C ard Fl ip per Modu le n ext to t he Pri nter .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 22 Installing the Card Fli pper Module Upgrade Kit (continued) Step Proce dure 9 Attach the Card Flipper Module to t he Prin ter by first sliding the rea r mount pin half w ay into the rear moun t pin slot.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 23 Installing the Card Fli pper Module Upgrade Kit (continued) Step Proce dure 10 Secure the front moun t pin to the Printer by using o ne of the tw o Phillips screw s that w ere removed in Ste p 4.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 24 Installing the Card Fli pper Module Upgrade Kit (continued) Step Proce dure 12 Open the Card Flipper Module Cove r ’s top lid and attach its upper latch hooks to the Prin ter’s top co ver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 25 Installing the Card Fli pper Module Upgrade Kit (continued) Step Proce dure 14 Secure the Printer’s Rear Cover by re-installing th e two Phill ips screw s that were removed in Step 2 .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 26 Printe r Driv er Installa tion Instal ling the Print er Dr i ve r Step Proce dure 1 Close a l l prog rams a nd insert the Software Ins t all ation CD into y our computer ’s CD dr ive.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 27 Installing the Printer Dri ver (continued) Step Proce dure 3 Wait during the installat ion.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 28 Installing the Printer Dri ver (continued) Step Proce dure 4 Cli ck on the Next bu tton to co ntinue w ith the Setu p progra m.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 29 Installing the Printer Dri ver (continued) Step Procedu re 5 Rea d th e Lice nse Agr eeme nt. Selec t the I a ccept the ter ms o f the li cense agreeme nt option and clic k Next to continue.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 30 Installing the Printer Dri ver (continued) Step Procedu re 6 a.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 31 Installing the Printer Dri ver (continued) Step Procedu re 7 Click Instal l t o begin th e in stall ati on.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 32 Installing the Printer Dri ver (continued) Step Procedu re 8 Che ck t he appr opri ate chec kb ox to sel ect eith er a si ngle- side d or a dual-s ided printer con figuration, as sh own be low.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 33 Installing the Printer Dri ver (continued) Step Proce dure 9 Sele ct th e por t tha t your P rint er is conne cted t o at thi s tim e.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 34 Installing the Printer Dri ver (continued) Step Proce dure 10 a. Conn ect t he USB cabl e to th e Pri nter. b. Turn ON the Printer at this time if it i s not already ON.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 35 Installing the Printer Dri ver (continued) Step Proce dure 11 W ait whil e th e Drive r comp onen ts ar e bein g copie d to your P C.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 36 Installing the Printer Dri ver (continued) Step Proce dure 12 Cli ck on the Fin ish button to com plete the S etup, as sh own bel ow.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 37 Installing the Printer Dri ver (continued) Step Proce dure 13 a. C lick on t he Yes butt on to exi t the inst all er, as shown bel ow.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 38 Installing the Printer Dri ver (continued) Step Proce dure 14 You h ave co mplet ed th e in stall ation .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 39 Printi ng a Test Pr int Ima g e Ste p Proc e du re 1 a. From yo ur computer’s startup menu, selec t Settin gs > Printe rs and Faxes (Window s XP) or > Printers (Window s 98SE, Me and 2000).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 40 Printing a Test Print Image (continued) Step Proce dure 3 This comp letes the DTC400 /DTC300/ DTC300M Card Printer/Encode r Installat ion Gui de.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 4 - 41 Printer Transport Movi ng the Pri nter t o anot her loca tion Step Proce dure 1 The P rint er c an be tr anspor ted by gr ipp i ng it u nder t he ba ck lid, as sh own i n the phot o bel ow.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 1 Section 5: General T roubleshooting This section prov i des Trou bleshooting procedu.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 2 Resolv ing the In correc t Imag e Dark ness prob lems (c ontinue d) ___________ ____.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 3 Safety Messages (re vie w carefully) S y mb ol Criti cal Instru ct ions fo r Saf et y purpo ses Danger: Failure t o follo w these i nstallation g uidelines can res ult in death or seri ous injury .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 4 Communications Error s Resol ving the Com munica tion Errors Sy mpt om( s) : Incorrect output, communica tions e rror on PC or Printer, st alling, no response from Pri nter, no j ob pri nted, “ paper out” error .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 5 Resol ving th e Commu nicati on Er rors (con tinued) Step Proc edure 4 Determine the prob lem with pr inting from the ap plication.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 6 Print Process Err ors All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 7 Resol ving a Car d Not Fed Err or (Cards w il l not feed of f the Ho pper) ( continu ed) St ep P rocedu re 2 Check the card qua l ity / loading.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 8 Resol ving a Car d Not Fed Err or (Cards w il l not feed of f the Ho pper) ( continu ed) St ep P rocedu re 7 Card Hop per Feed Ro ller is no t turning du ring a p rint job.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 9 Resolving a Card Not F ed Error (Two (2) or more card feed at the same time ) All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 10 Resol ving a Ca rd Not Fed Er ror (Tw o (2) o r more card fe ed at th e same ti me) (continu ed) St ep P rocedu re 2 Che ck car d qual ity / l oadi ng.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 11 Resolv ing a Ribbo n RFID E rror ( Ribbo n RFID A ntenna is Cor rupted) All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 12 Resol ving a Rib bon RF ID Err or (Rib bon RFI D Antenn a is Corru pted) (continu ed) St ep P rocedu re 2 Replace the P rint Ribbon a.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 13 Resolv ing a Ribbo n RFID E rror ( Ribbo n RFID Sensor is C orrupte d) All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 14 Resolving the Mag Verify Error All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 15 Resol ving the M ag Verif y Err or (conti nued) St ep P rocedu re 2 Che ck to e nsur e that t he ca rds ar e lo aded wi th t he Mag netic S trip e fa cing U p and tow ards the fron t of th e Printer.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 16 Resol ving the M ag Verif y Err or (conti nued).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 17 Resolv ing t he No Mag Installe d Erro r All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 18 Resol ving th e No M ag Inst alled E rror ( contin ued) St ep P roc edure 2 Press the Ca nce l Pr int button on the Driver Mon itor Error Display Message.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 19 Resolving a Ribbon Sensor Error (Ribbon Miscu e) All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 20 Resol ving a Rib bon Se nsor Er ror (Ri bbon M iscue) ( contin ued) St ep P rocedu re 2 Open the front cove r and remove the Ribbon Cartridge.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 21 Resolving a Ribbon Break Jam Error All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 22 Resol ving a Rib bon Br eak Ja m Error (contin ued) St ep P rocedu re 2 Open the front cove r and remove the Ribbon Cartridge. • If Ribbon is broken , contin ue to Step 3.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 23 Resolving a Ribbon Out Error All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 24 Resolv ing a No Ri bbon I nstalle d Error All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 25 Resol ving a No Ri bbon Install ed Er ror (co ntinued) St ep P rocedu re 2 Verify that a Ribbon Cartridge is insta lled in the Printer.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 26 Resolv ing a Invalid R ibbon Err or All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 27 Resol ving a In valid R ibbon Erro r (conti nued) St ep P rocedu re 2 Verify that the Ribbon Cartridge installed is desig ned for the correct Printer model .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 28 Resolv ing a Wro ng Ribb on Error All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 29 Resol ving a Wr ong Ri bbon E rror (continue d) St ep P rocedu re 2 Verify the Driver s ettings are correct. a. Open the Printer Cont rol Panel from the Compu ter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 30 Resolving a Card Jam E rror All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 31 Resol ving a Car d Jam Er ror ( continu ed) St ep P rocedu re 2 Look f or a jamme d card i n th e Pri nter. a. Open the Printer’s front cover.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 32 Resolving a Headlift Motor or Sensor Error All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 33 Resol ving a He adlift Mo tor or S ensor Err or (conti nued) St ep P rocedu re 2 Press the Cance l Print button on the D river Mon itor Error Display Me ssage.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 34 Step Proce dure 1 Review the follow ing infor mation.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 35 Resolv ing t he Bla nk Outp ut iss ues All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 36 Resol ving th e Blank Outpu t issues (conti nued) Step Proce dure 4 Adjust the place ment. a. Reset the Pri nter t o clea r any Er ror M ess ages by r emo vin g the po wer and reapply ing it.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 37 Resol ving th e Blank Outpu t issues (conti nued) Step Proce dure 6 Ensure t hat the proper v oltage i s being applied to the P rinthead .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 38 Flipper Table Module A s sem bly Problems Reso lving the No Fl ipper Table Mod ule pr oblem All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 39 Resolving the Fl ipper Jam Error All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 40 Resol ving th e Blank Outpu t issues (conti nued) Step Pro cedur e 2 Open the Printer ’s Flipper Tab le Module Cover.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 41 Diagnosing Image Problems Resolving the Pi xel Failure probl ems All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 42 Reso lving the Card Sur face De bris pr oble ms All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 43 Resolving the In correct Image Darkness p roblems All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 44 Resol ving th e Incorr ect I mage Dar kness p robl ems (co ntinue d) Step Pro cedur e 4 Correct the Ima ge Dark ness . See the Using the I mage Darknes s Option procedure .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 45 Resolv ing Ri bbon Wrinkle pro blems All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 46 Resol ving Ribbo n Wr inkle pro blem s (conti nued) Step Proce dure 4 Reduce the Image Darkness. See the Using the Image Darkn ess Option procedure .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 47 Resolv ing t he Exc essiv e Resin Print ing prob lems All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 48 Resolving the Excessi ve Resin Printing problems (continued) Step Pro cedur e 3 Reduce the I mage Da rkness. S ee the Using the Image Darkn ess Option procedure .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 49 Resolving the Incomplete Resin Printing problems All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 50 Resolv ing t he Ima ge Plac e me nt pro blems All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the Prin ter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 51 Step Proc edure 3 Verif y if th e H orizontal I mage Position Set ting is set correctly o r incorrec tly. See the graphic be low. • If the w hite border is on the leading edge of the c ard, adjust t he Horizon tal value by +2.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 52 Re solving the Image Place ment p roblems (cont inued) Step Proc edure 4 Verif y if th e Ver tical Image Positi on Settin g is set co rrectly or incorrectly .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 53 Resolving the Poor I mage Quality problems All T rou bles hooti ng pr ocedur es a ssum e that only f acto ry-aut hori zed supp lies are in u se in the P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 54 Running the Self Test Perf orm a self -tes t afte r (a) an ini tial setu p of th e Print er, (b ) a calib rati on proc edur e has been cond ucted o r (c) a part has been rep laced to ch eck for p roper Prin ter operation .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 55 Runni ng the Stand ard Self Test Prin t Display A: Full Col or Te st Pr int.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 5 - 56 Runni ng the Magneti c Self Tes t (HiCo Onl y) Perf orm a self -tes t afte r (a) an.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 1 Section 6: Printer Adjustment s See this se ction for printe r adjustmen t s.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 2 Using the Image Po sition Con trols ____________________ ___________________________.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 3 Selecti ng the Defi ned Area( s) func tion (contin ued) ____________________________.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 4 Safety Messages (re vie w carefully) S y mb ol Criti cal Instru ct ions fo r Saf et y purpo ses Danger: Failure t o follo w these i nstallation g uidelines can res ult in death or seri ous injury .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 5 Safety Messages (re vie w carefully) S y mb ol Criti cal Instru ct ions fo r Saf et y purpo ses Danger: Failure t o follo w these i nstallation g uidelines can res ult in death or seri ous injury .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 6 DTC400/ DTC300 Pr int Dr iver O ptions Reviewing DTC400, DTC300 and DTC300M Printer Drivers The func tionality of the DT C400, DTC30 0 and DT C300M Prin ter Drivers is iden tical.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 7 Reviewing DTC300 Printer Driver This sect ion appl ies to the D TC300 Printe r.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 8 Reviewing DTC300M Printer Drivers This sec tion appli es to t he DTC 300M Print er. ( Not e: T he DTC300M Printer doe s not provide the K Panel Re sin and I mage Co lor tab function ality .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 9 Using the Card tab (DTC400/ DTC300/DTC300M) A d just ing the Card Size Opt ion St ep D escrip tion 1 Cli ck on the inc hes or mm opt io n to cho ose t he desi red u nit of meas uremen t.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 10 A d justin g the Or ientat ion O ption St ep D escrip tion 1 Select Portrai t under Orien tati on t o cause the card to prin t i n a vert ical ori entati on.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 11 Selecting the nu mber of copies St ep D escrip tion 1 Select the number of cop ies by clicking on the U P or DO WN ar rows, as sh own belo w.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 12 Using the Diagnos tics butto n under the Card tab St ep D escrip tion 1 Cli ck on the Diagno stic but ton t o br ing up the F argo Di agnos tic s Uti lit y windo w.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 13 Using the Cle an P rinter O ptio n St ep D escrip tion 1 Cli ck on the Clean Printe r button to disp lay the Clean Printer Utility w indow.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 14 Using th e Clean Pr inter Op tion (con tinued) St ep D escrip tion 6 Cli ck on the Clean butt on at t he bott om of t he wind ow. ( Note : The Pri nter will begin to feed the clean ing card through the card path.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 15 Using the Test Prin t button St ep D escrip tion 1 Cli ck on the Test Pri nt bu tto n to s end a sim ple s elf- test print to th e Pri nter .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 16 Usin g the A bout butt on St ep D escrip tion 1 Cli ck on the Ab ou t b utton to ope n a d ialo g box cont ai ning t he copyri gh t and version, date code informat ion about this Printer Driver so ftware.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 17 Using the Device Options tab (DTC400/DT C300) Reviewing t he Dev ice O ptions tab (DTC400) The DTC40 0 w indow wit h the Device Options tab is display ed below .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 18 Reviewing t he Dev ice O ptions tab (DTC300) The DTC30 0 w indow wit h the Device Options tab is display ed below . ( Note: The DTC300 Prin ter now has frontsi de and bac kside options , as show n below .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 19 A d justin g the R ibbon Ty pe option Use the Ribbon Type option to select Print Ribb ons. St ep D escrip tion 1 Select the approp riate Print Ribbon Ty p e option fro m the dropdow n m enu for the ty pe of Print R ibbon in u se.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 20 Selec ting the A u to Ribbon S elect option St ep D escrip tion 1 Cli ck on the Auto Ri bbon Select button to verify that the R ibbon type selected mat ches the Ribb on i nstal led in th e P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 21 A d justin g the C olor Matc hing o ptio n Use the Col or Match ing d ropd own m enu to c hoose the col or m atchi ng o ptio ns whic h be st fits the print job requir ements.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 22 A d justing for t h e Resin Dithe r Select the appropri ate dith er method according to the ty pe of image to be prin ted. This op tion aff ects object s pri nt ed with a resi n-o nly Pri nt R ibbon .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 23 Usin g the Pr int Both Side s opt ion Use this op tion to au tomatica lly print on both the frontside and backside of a ca rd.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 24 Using the Sp lit 1 Set of Ribb on Pan els opt ion Use this optio n to pr ovide the .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 25 Using the Pr int Ba ck S ide Firs t opti on Step Proce dure 1 Select th is option: • If y ou need to prin t the firs t page of a two-pag e document on the backs i de of t he card .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 26 Using the Pr int Ba ck S ide Only option Use this op tion to p rint only onto the ba ckside o f cards. Step Proce dure 1 Sele ct thi s op tion to pri nt onl y ont o the b acksi de of c ard s.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 27 Using the Rotat e Front 1 80 Degrees or Rotate Back 180 Degre es opti ons Use this op tion to cha nge the position o f the prin ted image in relation to the set lo cation of a card 's Mag net ic St ripe or smar t chip .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 28 Using t he Disa bl e Pr inting option Use this op tion to d isable the printing capabil ities of the Printer. ( Note : This opt ion sti ll all ows t he Pri nter to encod e car ds.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 29 Using the Device Options tab (DTC300M) Reviewing t he Dev ice O ptions tab (DTC300M) The DTC30 0M window with the Device Options t ab is display ed below .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 30 A d justin g the R ibbon Ty pe option ( DTC 300M) Use the Ribbon Type option to select Print Ribb ons.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 31 Selecting the A u to Ribbon Select option (DTC300M) St ep D escrip tion 1 Cli ck on the Auto Ri bbon Select button to verify that the R ibbon type selected mat ches the Ribb on i nstal led in th e P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 32 A dj usting for the Resin Dither (DTC300M) Select the appropri ate dith er method according to the ty pe of image to be prin ted. This op tion aff ects object s pri nt ed with a resi n-o nly Pri nt R ibbon .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 33 Using the Res in Heat, Front (K ) opt ion (D TC300 M) Use this op tion to con t rol.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 34 Using the Resin Heat, Back (K) option (DTC300M) Use this op tion to con t rol the a.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 35 Using the Overlay He at (O) option (DTC300M) Use this op tion to con t rol the amount o f heat the Printer uses when p rinting w i th the ove rlay panel of a R ib bon.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 36 Using the Print Both Sides option (DTC300M) Use this op tion to au tomatica lly print on both the frontside and backside of a ca rd.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 37 Using the Pr int Ba ck S ide Firs t opti on Step Proce dure 1 Select the Print Back Side First op tion: If you n eed t o p rint th e fir st p age of a two-pa ge docum e nt on t he back side of the card.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 38 Using the Pr int Ba ck S ide Only option Use this op tion to p rint only onto the ba ckside o f cards.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 39 Using the Rotat e Front 1 80 Degrees or Rotate Back 180 Degre es opti ons Use this op tion to cha nge the position o f the prin ted image in relation to the set lo cation of a card 's Mag net ic St ripe or smar t chip .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 40 Using t he Disa bl e Pr inting option Use this op tion to d isable the printing capabil ities of the Printer, y et still allow s the Printer to encod e cards.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 41 Using the Image Color tab (DTC400/ DTC300) Step Proce dure 1 Select the Algeb raic .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 42 Using the Resin Heat (K) option (F ront and B ack) Use this op tion to con t rol th.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 43 Using the Overlay He at (O) option Use this op tion to con t rol the amount o f heat the Printer uses when p rinting w i th the ove rlay panel of a R ib bon.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 44 Using t he Color M atchin g option and Defau lt butto n Step Proc edure 1 To ret ur n all optio ns to t heir f acto ry set ting s, cli ck on the D ef au l t button.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 45 Using the Calibrate tab (DTC400/DT C300/DTC300M) Use the Calibra te tab to (a) cont.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 46 Using t he Image P ositi on Control s Use the Im age Po sition controls to adjust the posit ion of the overall pr int area to be precisely centered on a ca rd.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 47 Using the Imag e Position Contr ols (contin ued) Review the Image Position diag ram.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 48 Using the Se nsor s butto n Use the S ensor s button to bring up a separate dialog box for calibra ting th e Printer's Ribbon Sensor (see ins tructions in the Ca libration w indow below).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 49 Using the Settings button Use the Settings button to b ring up a separate dia log b.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 50 Using the Magnetic Encoding tab (DTC400/DTC300/ DTC300M) Use this op tion on ly if the P rinter has an option al Magnetic Stripe En coding Mod ule install ed.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 51 Using th e Magnetic T rack Selecti on radio buttons Use the Magnetic T rack Select .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 52 Using th e M agnetic Track S electio n radi o button s (con tinued ) Step Proce dure 2 Use the Magnetic T rack Select ions to con figure the way in which each o f the three magnetic trac ks will enco de.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 53 Using the Magnet ic Track Op tions rad io button s Use the Magnetic T rack options for these pu rposes : • Cust omi ze th e ISO en coded dat a form at for each of the M agn etic St rip e's th ree tr acks.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 54 Using the Bit Density radio buttons Use this op tion to cu stomize the Bit Reco rding D ensity (Bi ts per Inch) used to enco de the magnetic data on the curren tly selected track.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 55 Using the Character Siz e radio buttons Use this optio n to c ustomi ze th e Cha ract er Dat a Size (B its per Charac ter) used t o enco de the magne tic data on the cur rently selected trac k.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 56 Review ing the Enab le MLE Suppo rt chec kbox Mult i-La ngu age Ext ensi on (M LE) su pport in Win dows X P can cause t ext st rin gs t o be br oken up i nto fr agm ents.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 57 Using the A SCII Offset r adio button s Use this op tion to cu stomize the Characte r ASCI I Offset used to encode the magne tic data on the cur rently selected trac k .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 58 Usin g the LRC Genera tion ra dio but tons Use this optio n to c ustomi ze th e LRC Gener ation M ode ( use d to enc ode the magn etic d ata on the cur rently selected trac k ).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 59 Using the Shift Data Left checkbox Use this op tion to sh ift the reco rded magnetic da ta to the le ft-hand s ide of the card's Mag neti c Stri pe.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 60 Reviewing t he ISO Track Locations Review the magnet ic encoding Module, which en codes onto tracks in ac cordan ce with an ISO 7811 -2 Magnet ic Stripe.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 61 Sending the Trac k Informa tion Magnetic track data is sen t in the form o f text stri ngs from the applica tion so ft w are to the Printer D river along with all o f the othe r printab le objects with in the card design.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 62 Reviewing Tracks 1, 2 and 3 (in table format) Review thi s table , which display s the SS, ES, FS and the valid characters defined for each track.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 63 Review ing the A SCI I Code a nd Characte r Table ASCII Co de Char acter A SCI I Co de Ch ara cte r ASCII Co de Char acter 32 spa ce 56 8 80 P 33 ! 57 9 81 Q 34 " 58 : 82 R 35 No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 64 Using the Overlay / Print A r ea tab (DTC400/DTC300/ DTC300M) Use this op tion to con t rol w here the Ove r lay (O) Panel and/ or the prin t area ap pear on a card.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 65 Enab ling t he Fr ontside an d Back side opt ions Step Proce dure 1 Select the Print B oth Si des check box un der t he Devi ce Opt ion s tab to enab le the B ack side o ptio n under the O verl ay / P rint A rea.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 66 Enab ling t he Fr ontside o ption (Ove rlay / Pri nt A rea) Step Proce dure 1 Select the Fr on t radio button , which enab les the Overlay / Print Area and Security Opti ons function s.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 67 Enab ling t he B acks ide o ption ( Over la y / Print A rea) Step Proce dure 1 Select the Back radio button , which ena bles on ly the Ove rlay / Print Area function.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 68 Using the Overlay / Print A rea dro pdown menu Step Proce dure 1 Select the Full Car d optio n for the P rinter to over lay a nd/or prin t the entire card.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 69 Using th e O verla y / Pr int A r ea dropdow n menu (conti nued).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 70 Using the Overlay / Print A rea Use the se Ove r lay / Print A rea opti ons t o control both the print an d overla y toget her or control e ach individua lly.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 71 Using th e Overla y / Print Area (contin ued).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 72 Using the Def in e d A rea Option Step Proce dure 1 a. Determine whe ther to use the Frontside op t ion (via the Fr ont radi o butt on) or the Bac kside option (via the Back radio button ) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 73 Using th e Defi ned Are a Option ( conti nued ) Step Proce dure 2 When the card grid is first ac tivated , a small blac k square w i ll appea r at its default size of .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 74 Using th e Defi ned Are a Option ( conti nued ) Step Proce dure 4 Measure from the .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 75 Using th e Defi ned Are a Option ( conti nued ) Step Proce dure 5 a. Print the ca rd design and observe how the image is oriented on the card as it ejec ts f rom the Pri nter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 76 Using th e Defi ned Are a Option ( conti nued ) Step Proce dure 6 a. Determine whe ther to use the Frontside op t ion (via the Fr ont radi o butt on) or the Bac kside option (via the Back radio button ) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 77 Usin g Sec urity Options (Visua l Sec urity Solution s) (Fr ontside opti on only ) The Visua l Secur ity Solutions dropdown menu list will be us ed to enable a nd select which type of visua l secur ity w il l be used.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 78 Selecting O rientation - Landscape under Card tab Step Proce dure 1 Select the La n.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 79 Select ing the Vis ual Secur ity Sol utions dro pdow n menu (A to D) Step Proce dur.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 80 Select ing Or ienta tion - Portr ait unde r Card tab Step Proce dure 1 Select the P.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 81 Selec ting the V isual Secu rity Solu tions dropd own menu (E to H) Step Proce dure 1 Click on the Visua l Secur ity Solutions dropdow n menu unde r the Portrai t - Orientat ion (see abo ve) to use the op tions show n below .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 82 Selec ting the V eriMark radio button (Fron tside opt ion only) Step Proce dure 1 Cli ck on eithe r the Veri Mark or H oloMark rad io button, as show n below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 83 Selec ting the HoloMark radio button (Fron tside opt ion only) Step Proce dure 1 Cli ck on the HoloMa rk radio bu tton (be low) for th e squared -area siz e.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 84 Reviewing t he Custom VeriMark Card (Custom Graphic in a 2D foil ) The c ust om Veri Mark image is stam ped o n bl ank, st andar d-si zed c ards.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 85 Rev iewing the Cu stom H oloMar k Car d (Cust om Gra phic in a 2D foil) The custo m Holo Mark image is stamped on b lank, standard-s ized card s.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 86 Using the K Panel Resin tab (DTC400/DTC300) Select the K Panel R esin option to contro l where the resin b lack (K) pan el o f a full-color Ribbon is printed .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 87 Enab ling t he Fr ontside an d Back side opt ions Step Proce dure 1 Select Print Both Sides un der the Device Options tab to enab l e the Ba ckside opti on un der t he K Pa nel Res in ta b.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 88 Enab ling t he Fr ontside o ption (K Pa nel R esin) Step Proce dure 1 Select the Fr on t radio button to enable th e Front side option .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 89 Enab ling t he B acks ide o ption (K Panel Re sin) Step Proce dure 1 Select the Back rad io but ton t o enab le t he Back side opti on.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 90 Select ing fro m the Print A ll Black W ith K Panel opti ons (Fr ont a nd Back opt .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 91 Select ing the F ull Card o ption (Fro nt a nd Back options ) Step Proce dure 1 Select the Full Car d option for the Pri nter Driv er to prin t the resi n black (K) panel for all blac k found within all areas of the image .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 92 Select ing the D efine d A rea( s) optio n (Fr ont and Ba ck opt ions) Step Proce d.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 93 Selecting the Undefined A rea (s) option (Fron t and Back options) Step Proce dure .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 94 Select ing t he Defi ned A rea(s) funct ion (Fr ont a nd Bac k opti ons) To define an area, refer to the f ollowi ng steps: Step Proce dure 1 Cli ck on the Defined Are a(s) check box .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 95 Selecti ng the D efin ed Area( s) func tion (co nti nued) St ep P rocedu re 2 a. Determine the area of the card necessa ry to de fine.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 96 Selecti ng the D efin ed Area( s) func tion (co nti nued) St ep P rocedu re 4 a.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 97 Selecti ng the D efin ed Area( s) func tion (co nti nued) Refer to the previou s procedure .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 98 Selecti ng the D efin ed Area( s) func tion (co nti nued) Refer to the previou s procedure . * 17 23 55 * Kar en A tk i ns Ac ces s L ev e l-2 ID# 123 4478 Y= 0.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 99 Selecti ng the D efin ed Area( s) func tion (co nti nued) Refer to the previou s procedure .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 100 Selecti ng the D efin ed Area( s) func tion (co nti nued) Step Proce dure 6 Define an other are a by click ing on the Defined A rea up arrow.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 101 Selec ting the P rint YMC unde r K and Print K Onl y option s Step Proce dure 1 Sele ct bet ween the Print YMC U nder K and Print K Only options.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 102 Using the Printer Supplies tab (DTC400/DTC300/ DTC300M) Use the op tion s on th is tab to vi ew inf orm ati on about the Ri bbon insta lled in th e Pri nter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 103 Review ing the R ibbon Info rmation Step Proce dure 1 Use the Ribbon in formatio n to d etermine which Ribbon is be ing used to pr int w ith and it s par t num ber.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 104 Review ing the R ibbon Level Indica tor Step Proce dure 1 Use the Ribbon Le vel ind icator to view approxi mately how much Ribbo n is left.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 105 Using the P rinter Ca librati on Utility (DTC400/DTC300/ DTC300M) Access the Settings dialog box via the Settings butt on o n the C alibr ate t ab.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 106 Using th e Image Darkness Option Use this op tion to se t the ove rall dar kness of the printed i mage by increasin g or decreasing the amou nt of h eat us ed by the Prin the ad when prin ting .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 1 07 Using t he Print To p of Form O ption Use this op tion to ad just the lengthwise or horizo ntal posit ion of the p rinted imag e on a ca rd so it a ppears cente red.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 108 Using the Pr int E nd of Form O ption Use this op tion to reduce or increase the overall p rintable area in order to op timize edge -to- edge print ing tow ard the tra iling edge o f a card .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 109 Using t he Print Le ft of Form Option Use this op tion to ad just the ve r tical pos ition o f the printed image on a card so it ap pears centered .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 110 Usin g the Ma gnetic Encoder Volta ge Offse t Opti on Use th is option to adjus t the vo ltage o f the Magne tic Encoder. • Encoder vo ltage is set fro m the fac tory at a defau lt of 7.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 111 A d justing the Hi-C o Volta ge O ffset Step Proc edure 1 Identify the Magnet ic Encode r voltage required by t he cards.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 112 A d justin g the Lo-C o Vol tage O ffset Step Proc edure 1 Identify the Magnet ic Encode r voltage required by t he cards.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 113 Usin g the Ma g T op of For m Opti on Use this op tion on ly if the P rinter has a built-in Magnetic St ripe encode r.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 114 Using th e Mag T op o f For m Option (c ontinu ed).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 115 Using the Ribbon Te nsion O ption Step Proce dure 1 Use the Ribbon Tension option to increase the a mount of ten sion (d rag) on the Ribbon du ring print ing.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 116 Usin g the Fli pper Home Offs et Opt ion Use this optio n to c hange the Fli ppe r an gle rel ativ e to h ome/ horizo ntal posi tion.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 6 - 117 Usin g the Fli pper Smart A ngle Offs et Opti on Use this optio n to c hange the Fli ppe r an gle rel ativ e to t he def ault smart ca rd l oadi ng po siti on.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 7 - 1 Section 7: Cleaning The Card Printer is bu ilt to require a minimum a mount of maintenance .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 7 - 2 Safety Messages (re vie w carefully) S y mb ol Criti cal Instru ct ions fo r Saf et y purpo ses Danger: Failure t o follo w these i nstallation g uidelines can res ult in death or seri ous injury .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 7 - 3 DTC400/DTC300/D TC300M Card Printer/E ncoders Cleaning Kit (Part Number 08597 6) Cau.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 7 - 4 Cleaning the Printhead Perform this proced ure app roximately every 1000 prints to maintain a consistent print quality . Step Proce dure 1 Open the Printer’ s Front Co ver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 7 - 5 Cleaning the Platen and the Card Feed R ollers Perform this proced ure app roximately every 1000 prints to maintain a consistent print quality .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 7 - 6 Cleaning the Pl aten a nd the C ard Fee d Roll ers (co ntinue d) Step Proce dure 2 Rem ove all t he cards from t he Pr inte r’s Input Hopp er .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 7 - 7 Cleaning the Pl aten a nd the C ard Fee d Roll ers (co ntinue d) Step Proce dure 4 Inse rt t he Cleaning Car d into the Single Feed Card Slot until the card sto ps.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 7 - 8 Cleaning the Pl aten a nd the C ard Fee d Roll ers (co ntinue d) Step Proce dure 5 F.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 1 Section 8: Part s R eplacement This Sec tion descr ibes the replacement of key components of this Card Printer . Step Proce dure 1 Be sure to reverse the disassembly steps to reasse mble the Card Printer.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 2 Repla cing the Pr inthea d Acce ss Cov er (D9 0002 9) (co ntinu ed) ...... ..... ..... ...... ..... ..... ...... ..... ..... ..... 8- 36 Re placing the Mag net ic Modu le Door (D9001 07) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 3 Replaci ng the RFID Sensor A s sembly (A000365), Ribbon E ncoder Wheel (810 492), Enc oder Pulley (D900 106) a nd Ribb on Sup p ly Hu b (D90 0090) (co ntin ued).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 4 Safety Messages (re vie w carefully) S y mb ol Criti cal Instru ct ions fo r Saf et y purpo ses Danger: Failure t o follo w these i nstallation g uidelines can res ult in death or seri ous injury .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 5 Reviewing DTC400/ DTC300/DTC300M P arts Replacement Table Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 6 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 7 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 8 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 9 D900000 Cover- DTC400/ DTC300/ DTC300 M Basep late Cover D9001 1 5 Continued on the .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 10 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 11 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 12 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 13 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No. Descr iption C ate gory Drawin g No. D900107 Cover- Mag neti c Module Cover D9001 48 81049 2 DTC40 0/DTC30 0/DTC 300M Encode r W heel Mis.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 14 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No. Descr iption Catego ry Drawin g No. D900096 DTC400/ DTC300/ DTC300M Front Cover La tch Mis.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 15 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No. Descr iption Catego ry Drawin g No. D900104 DTC400/ DTC300/ DTC30 0M Ca rd Tray Mis.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 16 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 17 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 18 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 19 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No. Descr iption Catego ry Drawin g No. D900113 Headlift Sensor Sensor D900077 D900035 Pri nthea d Cabl e Cabl e NA D9010089 Idler Pulley Shaft Mis.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 20 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 21 Reviewing DTC400/DTC300/DTC3 00M Parts Replacem ent T able (continued) Part No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 22 Review ing the Main Print Boar d Connecti ons Main Pr int Bo ard ( A000 297 ) Locat ion RFID Ant enna Assem bl y (A 00036 5) Ca bl e (D9 00112) J5 Ste pper Motor A ssem bly (D 900 087) Ca ble (D 90 0032); 4 pin /4 wir e Con nect or.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 23 Cover, Door and Tray Removal Replacing the Rear Cover (D900 066) Ref er to Dr awings D90 0148. Tool s N eeded : Phillips Head Screw driver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 24 Replacing the Rear Co ve r ( D900066) (continued).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 25 Replacing the L eft End Cap (D900064) This procedu re applies to the DTC400 /DTC300/ DTC300M Printers. Refer to Draw ings D900147, D900 190 and D900 151.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 26 Repla cing th e Left En d Cap (D 900092 ) St eps P rocedu re 2 a. Gra sp t he Outp ut Door Assem bly (D 9000 92) by t he s ides with your thum b and fore finger.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 27 Repla cing th e Left En d Cap (D 900092 ).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 28 Replacing the Righ t End Cap (D900065-01 and –02) This procedu re applies to the DTC400 /DTC300/ DTC300M Printers. Refer to Draw ings D900147, D900 190 and D900 151.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 29 Repla cing th e Right End Cap (D9000 65-01 and –02) (contin ued) Steps Pr ocedure 2 a. Grasp the Input Door Assembly (D90007 3) by the sides with your thumb an d forefin ger.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 30 Replacing the Input Door A ssemb ly (D900148) Ref er to Dr awings D90 0148. Tool s N eeded : Non e. Parts Nee ded: Input Door D 900 148 Esti mat ed Rep air Tim e: 5 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 31 Replacing the Output Doo r A ssembl y (D900092) Refer to Draw ings D900159. Tool s Need ed: N one. Parts Nee ded: Inpu t D oo r D900092 Esti mat ed R epair Tim e: 5 minu tes .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 32 Replacing the Output Do or Assembly (D900092) (continu ed) Steps Pro cedure 2 a. Grasp the Output Door Asse mbly (D900092 )by the side s with your thu mb and forefinge r.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 33 Replacing the Input Tray (D900097) Ref er to Dr awings D90 0148. Tool s N eeded : Phillips Head Screw driver. Parts Nee ded: Input Tray D9 000 97.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 34 Repla cing th e Input Tra y (D900097) (conti nued ).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 35 Replacing the Prin thead Access Cover (D900029) Ref er to Dr awings D90 0148. Tool s N eeded : Phillips Head Screw driver. Parts Nee ded: Printh ead Acce ss Co ver D90002 9 Esti mat ed Rep air Tim e: 5 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 36 Repla cing the Pri nthead Access Cover (D90002 9) (conti nued).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 37 Replacing the Magnet ic Module Door (D900107) Ref er to Drawi ngs D9 00148 . Tools Neede d: Phi llips Head Screw driver. Part s N eeded : Magnetic Modu le Door D900 107 Esti m ated R epair Tim e: 5 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 38 Repla cing th e Magn etic M odule Do or (D90 0107) (c ontinu ed).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 39 Repla cing the Top Cov er A ssembly (incl udes Pr int Cir cuit B oard) This proce d.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 40 Repla cing th e Top Co ver Assembl y (includ es Prin t Circui t Boa rd) (con tinued) St eps P rocedu re 3 Rem ove th e Inpu t Door an d Ri ght E nd Cap.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 41 Repla cing th e Top Co ver Assembl y (includ es Prin t Circui t Boa rd) (con tinued.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 42 Replacing the F ront Cover (D900072-03 DTC300M, D900072-02 DTC300, D900072-01 DTC400) Ref er t o Dr awing D90 0190. Tools Nee ded: Phi llips Head Screw driver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 43 Replacing the Front Cover (D900072-03 DTC300M, D900072-02 DTC300, D9 00072 -01 DT C.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 44 Plate Remov al Replacing the Basepla te (D900000) Refer to Draw ing D900115. Tool s N eeded : Torx T -10 Screw driver, 7/32 nd nut dri ver, No.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 45 Repla cing th e Basepl ate (D9 00000 ) (conti nued) Steps Pro cedure 5 Use the Torx T-10 screwdriver to remove the two (2) front Baseplat e mount screw s (F000170) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 46 Repla cing th e Basepl ate (D9 00000 ) (conti nued) 6 Use the Torx T-10 screwdriver to remove the two (2) rear Baseplate m oun t screw s (F000170) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 47 Repla cing th e Basepl ate (D9 00000 ) (conti nued) St eps P rocedu re 7 Use a 7/32 nd nut d river to remove the on e (1) nut (130985 ) that secu res the ground cab l es to the Baseplate.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 48 Repla cing th e Basepl ate (D9 00000 ) (conti nued) St eps P rocedu re 10 a. U se a ne edle n ose pl iers to firm l y gr asp the C ard Ho pper s prin g Shaft (D900052 ), as shown below .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 49 Repla cing th e Basepl ate (D9 00000 ) (conti nued) St eps P rocedu re 12 Remove the Power/Co mmunicat ion Board. See Replacin g the Powe r/Communicat ion Board (A000368 ) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 50 Replacing the Clean Roller Plate (D900102 ) Refer to Draw ing D900110.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 51 Replacing the Clean Roller Plate (D900102) (continued) Steps Proce dure 8 Sli de th e Car d Driv e Gear ( 810 266) of f of the Cle aning Roll er S haft.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 52 Replacing the Clean Roller Plate (D900102) (continued) See the previous page.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 53 Replacing the Ribb on Motor Supply Assembly (D90012 1), O-Ring Drive Belt (1 40212), Encoder ( A 000 126) Sen sor and Motor (D840980) Ref er to Dr awings D90 0121.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 54 Repla cing th e Ribbo n Motor Supp ly Asse mbl y (D9 00121 ), O-Ri ng Dri ve Belt (.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 55 Repla cing th e Ribbo n Motor Supp ly Asse mbl y (D9 00121 ), O-Ri ng Dri ve Belt (.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 56 Repla cing th e Ribbo n Motor Supp ly Asse mbl y (D9 00121 ), O-Ri ng Dri ve Belt (140212), Encoder ( A000126) Sensor and Motor (D840980) (con tinued) See prev ious page for related procedure.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 57 Board, Interface and Printh ead Replacements Replacing the Pow er/Communication Board ( A 00036 8) Ref er t o Dr awing D90 0115. Tools Nee ded: Torx T-10 Sc rewdrive r, Phillips Head Scre wdri ver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 58 Repla cing th e Powe r/Communi cation Board (A00036 8) (con tinu ed) St eps P roced.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 59 Replacing the Prin thead Assembly (D9000 23) Refer to Draw ing D900110 Tool s N eeded : Torx T-10 Screw driver, Phillips Head Screw driver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 60 Repla cing th e Print head Assembl y (D9000 23) (conti nued) Steps Proce dure 7 Dis con nect t he ca bles from the Pri nthea d Assemb ly.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 61 Repla cing th e Print head Assembl y (D9000 23) (conti nued).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 62 Motor and Magnetic Head Replacements Refer to this disp lay for all four (4) Mo tor replacem ent procedu res in th is sect ion. See bel ow.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 63 Replacing the Headli ft Motor A ssem bly (D900085) Refer to Draw ings D900085 and D900 077 Tool s Need ed: P hill ips He ad S crewdri ver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 64 Replacing the Headlift Motor Assembly (E000806) an d the Headlift Cam (D90007 5) (continue d) See previ ous page an d foll owin g two p ages for pro cedu ral st ep s.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 65 Replacing the Headlift Motor Assembly (E000806) an d the Headlift Cam (D90007 5) (continue d) St eps P rocedu res 6 a.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 66 Replacing the Headlift Motor Assembly (E000806) an d the Headlift Cam (D90007 5) (continue d) Steps Proce dures 7 a.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 67 Replacing the Input Feed Motor A ss embly (D900084) Ref er to Dr awings D90 0077. Tool s N eeded : Phillips Head Screw driver. Parts Nee ded: Input Motor Ass embly D 90008 4 Esti mat ed Rep air Tim e: 15 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 68 Repla cing th e Input F eed M otor Assembl y (D9000 84) (con tinued ) St eps P rocedu res 8 Pull the M otor /Roll er As semb ly out of th e Pri nter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 69 Repla cing th e Input F eed M otor Assembl y (D9000 84) (con tinued ).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 70 Replacing the Step per Motor A sse mbly (D900087) Refer to Draw ing D900077 Tool s N eeded : Phillips Head Screw driver. Parts Nee ded: St epper M ot or D 90008 7 Esti mat ed Rep air Tim e: 10 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 71 Re placing the Ste pper Motor a ssemb ly (D90 0087 ) (continu ed) Steps Proce dures 9 Push the Stepper M otor into the Motor ca vity. 10 Disconnect the Step per Motor Pow er Cable.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 72 Replacing the Ribb on Take-up Motor (D900086) Refer to Draw ings D900086 and D900 077. Tool s Need ed: Torx T-10 S crewdriver. Parts Nee ded: Ribbon Take- up M otor A ssembl y D900086 Esti mat ed R epair Tim e: 10 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 73 Repla cing the Ribb on Take-up M otor (D 900086) (c ontinu ed) See low er righ t of disp lay .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 74 Repla cing the Ribb on Take-up M otor (D 900086) (c ontinu ed).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 75 Replacing the Magnet ic Head A sse mbly (D900050) Refer to Draw ing D900148. Tool s N eeded : Torx T -10 Screw driver. Parts Nee ded: Magne tic E ncod ing M odule D90 0050 Esti mat ed Rep air Tim e: 5 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 76 Repla cing th e Magn etic M odule Do or (D9001 07) (c ontinu ed).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 77 Sensor Replacement Replacing the Ribb on LED Sensor A s sembl y ( A 0003 74 and D900138) Ref er to Dr awings D90 0078. Tool s N eeded : Phillips Head Screw driver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 78 Replacing the Ribbon LED Sens or A ssembl y (A000374 an d D900138) (continu ed) St eps P rocedu re 7 Discon nect the Ribbo n Senso r LED cab le.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 79 Replacing the RFID Sen sor Assembly (A000365), Ribbon Encoder Wheel (810492), Encoder Pulley (D900106 ) and Ribbon Supply Hub (D900090) Refer to Draw i ngs D900 077 and D900110.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 80 Repla cing th e RFID S ensor Assembl y (A0003 65), R ibbon E ncoder Wheel (810492),.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 81 Repla cing th e RFID S ensor Assembl y (A0003 65), R ibbon E ncoder Wheel (810492),.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 82 Repla cing th e RFID S ensor Assembl y (A0003 65), R ibbon E ncoder Wheel (810492),.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 83 Replacing the Headli ft Sensor A sse mbly (D900113) Refer to Draw ings D900110. Tools Neede d: Torx T-10 Screw dri ver. Part s Nee ded: Esti mat ed Rep air Tim e: 20 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 84 Repla cing th e Headli ft Sens or Asse mbl y (D900 113) (co ntinu ed) St eps P rocedu re 7 Use a Ne edle Nose Pliers to firmly grasp the Hea dlift Sensor and pull to remove it.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 85 Roller, Cable and Fan Replaceme nt Replacing the Pl aten Roller (D900041) Refer to Drawi ng D900 110.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 86 Repla cing th e Plat en Roller (D9000 41) (con tinu ed) Steps Proce dure 6 Rem ove t he P rint head . Se e Replacing the Prin thead Asse mbly (D9000 23) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 87 Replacing the Pl aten Roller (D900041) (cont inued).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 88 Repla cing the Card C leani ng or Fee d Rol ler (D90 0040 ) (lef t of Platen) and the Card Drive Gear (810266) Refer to Drawi ng D900 110.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 89 Replacing the Card Cleaning or Feed R oller (D900040) (left o f Platen) and the Card Drive Gear (810266) (continu ed) Steps Proce dure 8 Sli de th e Car d Driv e Gear ( 810 266) of f of the Cle aning Roll er S haft.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 90 Replacing the Card Cleaning or Feed R oller (D900040) (left o f Platen) and the Car.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 91 Replacing the Input Pusher (D900104) Refer to Draw ings D900110. Tools Neede d: Torx T-10 Screw dri ver. Part s Nee ded: Esti mat ed Rep air Tim e: 15 minutes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 92 Repla cing th e Input P usher ( D9001 04) (con tinu ed) St eps P rocedu re 4 Remove th e Printer Bas eplate . See Rep laci ng the Basep late (D90 0000 ) .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 93 Replacing the Card F eed or Exit Roller (D900042) and the Card Drive Gear (810 266) Refer to Draw ing D900110.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 94 Replacing the Card Feed or Exit Roll er (D900042) and the Card Dri ve Gear (81 026 6) ( con ti nu ed) Steps Proce dure 8 Use a Small Flathe ad Screwdriver gently pry the Roller Sha ft Locking Bushing arm (D9000 46) out abou t 2mm.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 95 Replacing the Card Feed or Exit Rol ler (D900042) and the Card Dr ive Gear (81 026 .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 96 Replacing the Pinch Roller (D900098) Refer to Draw ing D900110 .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 97 Repla cing th e Pinch Roll er (D90 0098) (c onti nued) Steps Proce dure 8 Use a Small Flathe ad Screwdriver gently pry the Roller Sha ft Locking Bushing arm (D9000 46) out abou t 2mm.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 98 Repla cing th e Pinch Roll er (D90 0098) (c onti nued) See the previous page.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 99 Replacing the Clean ing Roller Lever (D90005 1) Refer to Draw ing D900110.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 100 Repla cing th e Cleani ng Rol ler Le ver (D9 00051 ) (cont inued) Steps Proce dure 8 Use a Small Flathe ad Screwdriver gently pry the Roller Sha ft Locking Bushing arm (D9000 46) out abou t 2mm.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 101 Repla cing th e Cleani ng Rol ler Le ver (D9 00051 ) (cont inued) See p rocedure on p revious p age.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 102 Replacing the Prin thead Cable A ss embly (D900035) Ref er to Dr awings D90 0023 and D90 0110. Tool s N eeded : Phillips Head Screw driver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 103 Repla cing th e Print head Cabl e Asse mbly (D 90003 5) (con tinued ) Steps Proce dure 8 Place the Prin ter bac k on its feet and discon nect the Prin thead Data Cab le fro m the Main Board.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 104 Replacing the Fan A ssembl y (D900033) Ref er to Drawi ng D90 0115. Tools Neede d: Philli ps Hea d Scre wdri ver. Part s N eeded : Fan Asse mbly D900033 Esti m ated R epair Tim e: 30 mi nut es.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 105 Repla cing th e Fan As sembl y (D9000 33) ( contin ued) St eps P rocedu re 7 Feed t he F an As sembly p ower cabl e out of the Print er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 106 Pulley Removal Replacing the Step per Motor Idler Pulley (D840888) and the Platen Roller Drive Gea r (D900047) Ref er to Dr awings D90 0089 and D90 0110.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 107 Replacing the Stepper Motor Idler Pulle y (D840888) and the Platen Roller Dri ve G.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 108 Replacing the Step per Motor Idler Pulley Shaft A s sembl y (D900089) and the Stepper Motor Dri ve Belt (F000094) Ref er to Drawi ngs D9 00077 .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 109 Repla cing th e Steppe r M otor Idl er P ulley Shaft Assembl y (D9 00089) and th e Stepper M otor D rive Belt (F000 094) (conti nued) St eps P rocedu re 7 Use a To rx T-10 screw driver to remove the Stepp er Motor Idler set sc rew.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 110 Flipper Table Replacement Replacing the Fl ipper Table Module A ss embl y (D900200) Ref er to Dr awings D90 0200. Tool s N eeded : Phillips Head Screw driver.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 111 Replacing the Flipper T able M odule A sse mbly (D900200) ( continued) Step De scrip tion 3 Rem ove t he C ard O ut put or Exi t Do or (D 90 0092) and Left End C ap (D 900064 ) to the Pr inter, as sh own below .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 8 - 112 Replacing the Flipper T able M odule A sse mbly (D900200) ( continued) Step De scrip tion 4 a. Remove the Cover from the Flippe r Table Modu le Assembly (D900200), as show n below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 9 - 1 Section 9: Packing the Card Printer The p urp ose of this s ectio n to p rovi de the U ser wi th a s pecif ic packi ng proc edur e for t his Card Printe r.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 10 - 1 Section 10: Boar d Level Di agnostics The purpos e of this section to provide the User w ith specific Board Lev el Diagnost ic procedures for Board Errors and Senso r Testing for this Card Printer.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 10 - 2 Sensor and Motor Rev iewing the Sens or Loca tion a nd Vo ltages Use this table as a refere nce tool for Board Leve l Diagnostics Sen sor Lo catio n Pin Low Range VDC High Range VD C RFID Board J5 3 Present .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 1 Section 11: Diagnostic T ool Uti lity The Fargo Diagnos tics Utili ty is designed to prov ide access to the f o llowing: • The diagnos tic capabilit ies of the Pr inter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 2 Using the Diagnostic Tool Util ity Selecting fr om the Printer Selection menu St ep.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 3 Rev iewing customi zed Dia gnosti c Util ity tabs for y our Printer Step Proce dure 1 Select a Printer from the Pr inter Selec tion menu that will cu stomize the tab s that are ava ilable.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 4 Using the Diagnostic Utilit y tabs Select ing t he Pri nt Spo oler ta b in the D iagnos tics Uti lity Ste p Proce dure 1 Select the Print Spooler tab, as show n below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 5 Selecti ng the Print S pooler tab in th e Diag nosti cs Utili ty (con tin ued) Ste p Proce dure 2 Cli ck on the Select File button to br ing up the Brow se for Print File w i ndow , as show n below a nd on the next pag e.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 6 Selecti ng the Print S pooler tab in th e Diag nosti cs Utili ty (con tin ued) Ste p Proce dure 3 a. Cli ck on the Brow se button to browse throu gh an o pen file d ialog box , as show n below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 7 Selecti ng the Print S pooler tab in th e Diag nosti cs Utili ty (con tin ued) Ste p Proce dure 4 Select the number of cop ies to be prin ted, as sho wn below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 8 Selecti ng the Print S pooler tab in th e Diag nosti cs Utili ty (con tin ued) Ste p Proce dure 5 Cli ck on the Send Fi le button in orde r to send the selected Print Files (.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 9 Select ing t he Firm ware U pdates tab in the D iagn ostics Utility Ste p Proce dure 1 Sele ct t he F irm ware U pdat es t ab, as s hown below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 10 Down loadi ng Fir mware U pdates St ep P rocedu re 1 Select the Dow nload Fi rmware button . If yo u have Interne t access, this w ill automa tically take y ou to the Firmw are Updates section of the Fargo website.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 11 Placi ng the Prin ter in the Upgr ade Mode Step Proce dure 1 Disco nnect Power f rom t he Pr inter. 2 Press and hold dow n the po wer and pause butt ons on the Printer.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 12 Sendi ng the Firm w are File Step P rocedu re 1 Ensur e t hat the f irm ware F il e is se lect ed. 2 Ensure that the Printer LC D says Upgrad e Firmw are Send F ile Now .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 13 Selecting the M echanics tab in the Diagnost ics Utility Step Pro cedur e 1 a. Select the Mechanics tab to tes t Motors and Sen sors in the P rinter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 14 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedur e 2A C lick on t he Ca librate t he Ribb on Senso r butt on to c ali brat e the P rint R ibbon .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 15 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedur e 2B C lick on t he Clean Pr inter (R emove Ca rd s) butt on t o acti vate t he fun cti on.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 16 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedur e 2C Cli ck on the Cy cle the Printhea d button to verify operation o f the Prin thead Headlift M o tor and Headli ft Sensor.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 17 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedur e 2D Cli ck on the Advan ce the Step per Mo tor button to move the Card Rollers for ward in t he P rint er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 18 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedur e 2E C lick on t he Reve rse the Step per Motor button to move the C ard Ro llers back war ds in the Pri nter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 19 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedur e 2F Click on the Cycle th e Car d Inp ut Rol ler (Remove Card s) butt on to acti vate the C ar d Input M otor.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 20 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedu.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 21 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedu.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 22 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedu.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 23 Selecting the Mechan ics tab in the Diagnostics Utilit y (continued) Step Pro cedu.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 24 Selecting the S elf Tests tab in the Diagnostics Ut ility Use these options to run the internal Printer Sel f Tests.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 25 Select ing t he Car d Sam ples ta b in t he Dia g nost ics Uti lity St ep P rocedu re 1 a. Select the Card Samples tab to print sa mple image s from the Printer.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 26 Select ing the Ma gnetic E ncodi ng ta b in t he Diag nosti cs Uti lity St ep P rocedu re 1 a. Select the Magnet ic Encoding tab to test the Mag netic Encod ing capabili ties of the Printer.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 27 Select ing t he Hel p butt on in t he Dia g nost ics Uti lity St ep P rocedu re 1 Select the Hel p button to access the Fargo Diagnostics Utility Help document, as sh own be low.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 28 Select ing the A bout butt on i n the Diag nostics Uti lity St ep P rocedu re 1 Select the Abo u t button to access ve rsion inform ation for the Diagno stics tool.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 11 - 29 Select ing t he Exit butto n in t he Dia gnostic s Utilit y St ep P rocedu re 1 Select the Exit bu tton to clos e out and exit fro m the Fargo Diagnos tics Utility .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 1 Section 12: Firm w are Upgrades Intro ducti on The D TC4 00/DTC 300/D TC30 0M Car d Pri nter/ Encod ers - Firm ware U pgr ade Doc ument (Rev.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 2 Safety Messages (re vie w carefully) S y mb ol Criti cal P rocedu r es for S afet y purpo ses Danger: Failure t o follo w these insta llation g uidelines can result i n death or seri ous injury .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 3 Downloading Firmw are Step Proce dure 1 Open the Fargo Diagno sti c Uti lity (l oca ted i n the Pr ogram s fol der ), as s hown belo w.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 4 Down loadin g Firmw are (con tinued ) Step Proce dure 2 Use the S elect a print er to contin ue dropdown men u to selec t the Print er.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 5 Down loadin g Firmw are (con tinued ) Step Proce dure 3 a. Ch eck that the Comp uter has an acti ve I nter net con nec tio n. b. Cli ck on the Yes button , as show n below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 6 Down loadin g Firmw are (con tinued ) Step Proce dure 4 This will l au nch the Fargo S upp ort p age. • Cli ck on the Firmware selec tion b ox.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 7 Down loadin g Firmw are (con tinued ) Step Proce dure 5 Cli ck on the Pri nter name un der Printer Firm ware to begin the down load, as show n below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 8 Down loadin g Firmw are (con tinued ) Step Proce dure 6 Cli ck on the Sav e butt on t o sav e the fi le, as sho wn bel ow.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 9 Down loadin g Firmw are (con tinued ) Step Proce dure 7 Cli ck on the Sav e button to save the file to the co mputer’s Desktop , as sh own belo w.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 10 Downloading Firmware (contin ued) Step Proce dure 8 Cli ck on the Close button t o close thi s dial og when the d ownloa d is c ompl eted, as sh own be low.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 11 Down loadin g Firmw are (con tinued ) Step Proce dure 9 From the computer’ s desktop, double c lick on the Firmware .exe file to un-z i p it, as sh own be low.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 12 Down loadin g Firmw are (con tinued ) Step Proce dure 10 Cli ck on the Browse button on the WinZip Self- Extractor w indow, as shown belo w.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 13 Down loadin g Firmw are (con tinued ) Step Proce dure 11 Sele ct th e Desk top, then c lick on the OK button in the Browse for Folder dialog, as sh own be low.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 14 Down loadi ng Fir mware (c onti nued) Step Proce dure 12 C lick on the Unzip butto.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 15 Downloading Firmware (contin ued) Step Proce dure 13 Cli ck on the Select Firm ware File butt on unde r Step 2 : in the Fargo Diagnost ic Utility window , as shown below.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 16 Down loadin g Firmw are (con tinued ) Step Proce dure 14 • Sele ct th e Desk top dr opdown m e nu. • Cli ck on t he .f rm f ile. • Cli ck on the Open button, as sh own be low.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 17 Placing the Printer in the Firmwar e Upgrade Mode Step Proce dure 1 Caut ion: Turn off the Prin ter and unplug the pow er cord from the Pri nter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 18 Placing the Print er in the Firmw are Upgra de Mo de (continued ) Step Proce dure 2 Ensure that the Printer LC D display s this messag e: as shown below Upg rade F irmw are Send Fi le Now.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 19 Sending the Firmw are File Step Proce dure 1 Ensure that the Printer LC D display s this messag e: Upg rade F irmw are Send Fil e Now .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 12 - 20 Sendi ng the Fir mw are File (co ntinue d) Step Proce dure 3 Upon suc cessful co m plet ion of the F irmware Upd ate, the Printer w ill restar t.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 13 - 1 Section 13: Fargo T echnical Support The purpos e of this section to provide the User w ith an efficien t , step-b y-step proc edure to be us ed whe n con tacti ng Far go T echni cal Su pport as ne ede d for t his Car d Pri nter.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 13 - 2 Reading the Serial Numbers on a Fargo Printer The p urp ose of this s ectio n is t o prov ide u pdat ed in struct io ns for readin g ser ial n umbe rs on a Fargo Printer.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 14 - 1 Section 14: Reviewing the Sp are Part s List Reviewing the DT C400/DTC300/DTC300M S.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 1 Section 15: Glossary of T erms Term De finit ion 24-b it c olor A col or d epth f or an im age t hat us es 8 bi ts for each color (red, blu e, green) co m bining the possib le 256 shad es to provide a color depth of 16.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 2 Glossar y of Terms (continued) Term De finit ion Barc ode s A seri es of alt ernat .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 3 Glossar y of Terms (continued) Term De finit ion Cache A ty pe of memory b uffer to.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 4 Glossar y of Terms (continued) Term De finit ion CR-79 A card di mension st andard of 2 .0625" L X 3.3125 " W (+/-0.00 2" W , +/-0.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 5 Glossar y of Terms (continued) Term De finit ion Dir ect-t o-C ard (DTC ) Prin ting.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 6 Glossar y of Terms (continued) Term De finition Dwell Time The sp eed a t which the c ard moves across the lam Rolle r, mea sure d in sec onds/i nch (s ecs/in ).
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 7 Glossar y of Terms (continued) Term De finit ion Encode r (whee l) An elec t romecha nical device , attached to a sha f t th at detects the change in rotationa l posit ion, increme nted to co unt ticks pe r revolutio n.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 8 Glossar y of Terms (continued) Term De finit ion Flas h M emory A m icr ochip base d no n-vol ati le m emory d evi ce t hat hold s it s d ata whe n power is re moved.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 9 Glossar y of Terms (continued) Term De finit ion Hard Dr ive A high ca pacity storage device in a PC consistin g of non- removab le magnet ically encodable pla tters.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 10 Glossar y of Terms (continued) Term De finit ion IEEE 1284 (Institute of E lec tric al and Electronic s Engineers 1284) A standard metho d of signaling f o r a bi-direc tional para llel int erfa ce on per son al com puter s.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 11 Glossar y of Terms (continued) Term De finit ion Landsca pe A documen t layo ut that is view ed w ith the docume nt's long ax is in a hori zonta l ori ent ati on.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 12 Glossar y of Terms (continued) Term De finit ion MB (Mega byte) A unit o f storage th at equ als 1,048,5 76 by tes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 13 Glossar y of Terms (continued) Term De finit ion Oversiz ed Cards Oversiz ed cards a re used for mo re efficien t visual identificat ion and a re av ail able i n many non- sta nda rd si zes.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 14 Glossar y of Terms (continued) Term De finit ion Pinc h R oll er A f ree s pinn in.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 15 Glossar y of Terms (continued) Term De finit ion Pri nthea d The de vice on a Pr int er that prod uces the ima ge on the m edia . PVC Abbre viation for poly vinyl chloride , often ca lled viny l.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 16 Glossar y of Terms (continued) Term De finit ion Resolut ion The nu mber of ind ividual pixe l elements in a grap hic, taken ove r a given leng th, used to indic ate the sha rpness of the picture and the lev el of d etail .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 17 Glossar y of Terms (continued) Term De finit ion Self-tes t A pre-deter mined print fi le used to confirm Printer ope ration typ ically sent fro m the Driver or stored in the Print er's memory .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 18 Glossar y of Terms (continued) Term De finit ion Spooling Rather tha n moving a pr.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 19 Glossar y of Terms (continued) Term De finit ion Thermocou ple A device for measu .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 15 - 20 Glossar y of Terms (continued) Term De finit ion USB (Uni vers al Serial Bus ) A 1.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 16-1 Section 16: Index A Abo ut button, 6-16 AC - A lterna ting C urrent, 15- 1 Acce pted .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 16-2 dime nsion bo xes, 6-95 DIP switch es (Dual In-line Pac kage Switch es), 15 -4 Direct.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 16-3 Image Placem ent optio n, 6-107 imag e place ment pr oblem s, 5-51 Image P laceme nt .
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 16-4 Pinch R olle r , 15-14 Pixe l, 15-14 Plate n, 15-14 P late n R olle r, 8-85, 8-86 Pol.
RESTRI CTED US E ONLY Fargo Ele ct ronics, Inc. DTC400/DTC300/DTC300M Card Printer Service Man ual (Rev. 1.3) 16-5 Softw are, 15-17 spe cial pre cauti ons, 1-2, 6-4, 6-5, 7-2, 8- 4, 10-1 Split 1 Ribbo.
Een belangrijk punt na aankoop van elk apparaat FARGO electronics DTC300 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen FARGO electronics DTC300 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens FARGO electronics DTC300 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding FARGO electronics DTC300 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over FARGO electronics DTC300 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van FARGO electronics DTC300 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de FARGO electronics DTC300 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met FARGO electronics DTC300 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
