Gebruiksaanwijzing /service van het product CDA-7998 van de fabrikant Alpine
Ga naar pagina of 52
EN FR ES ES IT SE R R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
CHM-S630 CHA-S634 • CD changer for CD A-7998/CD A- 7897. • Changeur CD pour CD A-7998/CD A- 7897. • Cambiador de CD para CD A-7998/ CD A-7897. Alpine CD Changers Give Y ou More! More m usical selections, more versatility , more con venience .
1 -EN ENGLISH Contents Operating Instructions W ARNING W ARNING .................................................. 3 CA UTION ................................................... 3 PRECA UTIONS ......................................... 3 Basic Operation Opening the Front Panel .
2 -EN CD Pla yer Operation Opening and Closing the Mov able display ..... 24 Playback .......................................................... 24 Music Sensor (Skip) ........................................ 25 Fast F orward and Backward ............
3 -EN WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION A WA Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
4 -EN PRECAUTIONS Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Inserting Discs Y our player accepts only one disc at a time for playback.
5 -EN Basic Operation Opening the Fr ont P anel 1 Press the Open b utton on the F ront Panel. NO TE The display will close a half minute after the ignition ke y is turned to the OFF position. Hiding the Fr ont P anel 1 Press and hold the c b utton on the F ront P anel for at least 3 seconds.
6 -EN Adjusting V olume / Balance ( Between Left and Right ) / Fader ( Between Front and Rear ) / Defeat 1 Press the MODE button repeatedly to choose the desired mode.
7 -EN 4 T ur n the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can be manually set by pressing the MODE b utton. NOTE T o synchr onize the clock to a time signal, pr ess the MODE button for at least 3 seconds after setting the “hour .
8 -EN About the Cr ossover Crosso ver: This unit is equipped with an Activ e Crossover . The crossov er limits the frequencies delivered to the outputs . Each channel is controlled independently . Thus, each speaker pair can be driv en by the frequencies f or which they ha ve been optimally designed.
9 -EN Adjusting and Storing the Cr ossover Before perf or ming the follo wing procedures, ref er to “ About the Crossov er ” (P age 8) 1 Press and hold the T .CORR button f or at least 3 seconds. < 2 W A Y System > 2 Press the B AND button to select desired parameter .
10 -EN Basic Operation Recalling the Stored Cr ossover Settings 1 Press and hold the T .CORR button f or at least 3 seconds. 2 Press the Preset buttons (1 thr ough 6) that has your desired crossov er settings in memor y . 3 Press the T .CORR button to return to the normal mode.
11 -EN Here we calculate the time correction v alue for the front left speaker in the diag ram at the left. Conditions: F arthest Speaker – listening position : 2.25 m (88-9/16") F ront left speaker – listening position : 0.5 m (19-11/16") Calculation: L = 2.
12 -EN Basic Operation Example of Steps 2 and 3 Setting (1) After entering corrections for the front (left and right) speakers in STEP 15, the time diff erence is 1.5 ms for both front-left and front-right speakers . (2) After entering corrections for the left (front and rear) speakers in STEP 15, the time diff erence becomes 3.
13 -EN Setting the MX Mode MX (Media Xpander) makes v ocals or instr uments sound distinct regardless of the music source . The r adio, CD , and MP3, will be able to reproduce the music clearly ev en in cars with a lot of road noise. 1 Press the MX button to select MX ON.
14 -EN Quic k Searc hing Function Y ou can easily select tracks and files. 1 Press the SOURCE b utton to set the desired source mode. (CD mode is e xplained here as an example) 2 When setting the CD mode, press and hold the Q. S. button f or at least 2 seconds.
15 -EN Radio mode CD mode MP3 mode ∗ 1 Displa yed during playbac k of a disc with CD T ext. “ NO TEXT ” will be displa yed when the CD contains no T ext data. ∗ 2 If an MP3 file contains ID3 tag inf ormation, all the ID3 tag information is displa yed (e.
16 -EN Erasing Disc Title/Station Title 1 Press the TITLE button to select the titling mode . Then, press and hold f or at least 3 seconds. 2 Press and hold the - / J b utton for at least 2 seconds to activ ate the title scanning mode. The title in the displa y will blink.
17 -EN Switching the T uner Mode The CD A-7998/CD A-7897 incor porates the MAX TUNE SQ f or the highest quality tuner audio. Moreov er , you can choose between 3 settings to suit y our own personal sound pref erences and usage. 1 Press and hold the SETUP button f or at least 3 seconds.
18 -EN SETUP Operation Setting the Subw oofer Output Y ou can set the subwoofer output to stereo or monaural. Make sure to set the correct output f or your subw oofer type. 1 Press and hold the SETUP button f or at least 3 seconds. 2 Press the g DN or the f UP button to select “ Subwoof er STEREO .
19 -EN Setting the A UX Mode ( V -Link ) Y ou can input TV/video sound b y connecting an optional Ai-NET/RCA Interf ace cable (KCA-121B) or V ersatile Link T erminal (KCA-410C) to this component. 1 Press and hold the SETUP b utton for at least 3 seconds.
20 -EN Demonstration This unit has a Demonstration feature which sim ulates the display functions . 1 Press and hold the SETUP button f or at least 3 seconds. 2 Press the f UP or g DN b utton to select the DEMO mode. 3 Press the BAND b utton to tur n on or off the DEMO mode.
21 -EN Switching the Animation Displa y type ( CD A-7998 only ) Y ou can select your fa vorite animation displa y from five types of P atter n3 in “ Switching the Displa y Modes. ” 1 Press and hold the SETUP button f or at least 3 seconds. 2 Press the g DN or f UP button to select ANIMA TION mode.
22 -EN Radio Operation Manual T uning 1 Press the SOURCE b utton until a radio frequency appears in the displa y . 2 Press the B AND button repeatedly until the desired radio band is displa yed. Each press changes the band: 3 Press the TUNE b utton repeatedly until “DX SEEK (DX)” and “SEEK (LOCAL)” disappear from the displa y .
23 -EN A utomatic Memor y of Station Presets 1 Press the SOURCE b utton to select the radio mode. 2 Press the B AND button repeatedly until the desired radio band is displa yed. 3 Press and hold the A. ME button f or at least 2 seconds. The frequency on the displa y continues to change while the automatic memory is in progress.
24 -EN CD Player Operation Insert a disc with the label side facing up. 2 Inser t a disc with the label side facing up . The disc will be pulled into the unit automatically . The mov able displa y will close and pla yback will begin. When a disc is already inser ted, press the SOURCE button to s witch to the CD mode.
25 -EN Repeat Play 1 Press the REPEA T button to pla y back repeatedly the trac k being played. The track will be pla yed repeatedly . Press the REPEA T button again and select OFF to deactivate the repeat pla y .
26 -EN Contr olling CD Changer ( Optional ) An optional 6-disc or 12-disc CD Changer ma y be connected to the CD A-7998/CD A-7897 if it is Ai-NET compatible . With a CD Changer connected to the Ai- NET input of the CD A-7998/CD A-7897, the CD Changer will be controllable from the CD A-7998/CDA-7897.
27 -EN Multi-Changer Selection Alpine's Ai-NET system will suppor t up to 6 CD Changers. When operating two or more changers , the KCA-400C (Multi-Changer Switching de vice) must be used. If you use 1 Switching de vice, you can connect up to 4 CD Changers.
28 -EN MP3 Operation SOURCE c - / J Playing MP3 Files with the CD Changer ( Optional ) If you connect a changer compatib le with MP3, you can play CD-R OMs, CD-Rs, and CD-R Ws containing MP3 files on the CD A-7998/CDA-7897. 1 Press the SOURCE button to s witch to the MP3 Changer mode.
29 -EN M.I.X. ( Random Pla y ) 1 Press the M.I.X. button in the pla y or pause mode. The files on the disc will be play ed back in a random sequence. T o cancel M.I.X. play , press the M.I.X. b utton again to tur n off the M.I.X. NO TES • W ith M.I.
30 -EN Setting the Range of MP3 File Selection Y ou can set the range of MP3 file selection to “entire disc contents” or “f older contents only . ” 1 Press and hold the SETUP b utton for at least 3 seconds. 2 Press the f UP or g DN b utton to select the MP3 PLA Y mode.
31 -EN • Corresponding File Systems This device supports discs formatted with ISO9660 Lev el 1 or Lev el 2. Under the ISO9660 standard, there are some restrictions to remember . The maximum nested f older depth is 8 (including the root directory). File/folder names are limited to 31 characters (including the e xtension).
32 -EN Chec king the XM Radio ID Number Y ou need to provide XM with the unique XM Radio ID number for y our XM Radio Receiver in order to subscribe to XM's programming. This number is an 8 character alphanumeric n umber that is printed on a label directly on the XM Receiver .
33 -EN Receiving Stored XM Channels 1 Press the B AND button to select the desired band (XM1 or XM2). 2 Press the channel Preset button that has y our desired satellite channel in memory . Category Searc h Category Search allows direct access to the first channel of a specific category .
34 -EN i-Personalize™ Operation ( CDA-7998 only ) Data Downloading 1 Inser t the CD-R disc containing the data. If the source is not the CD mode, press the SOURCE button to change to the CD mode. 2 Press the - / J button f or at least 2 seconds. The mode switches to the do wnload mode to show the download confirmation screen.
35 -EN About MobileHub ™ Link Connect a separately sold J unction Box and a portable telephone (av ailable from Nokia) to control the incoming and outgoing calls of the por table telephone. CA UTION • Even with hands-fr ee operation, a driver can be distracted during telephone operation or r eceiving a call.
36 -EN Calling Dial call Input the telephone number using the dial. 1 Press the b utton. 2 Input the telephone number b y using the ten ke ys (0 to 9, and ). NO TES • When you want to input +, pr ess the button twice within 2 seconds. • T o erase the number s you already input, pr ess the PHONE BOOK button.
37 -EN 4 Press the b utton to end the call. The telephone mode will end and return to the original source mode. NO TE Y ou cannot use this function if there is not an incoming history on the unit. Calling by the incoming missed call history Y ou can place a call to any of the last 999 calls missed recorded in memory .
38 -EN 8 g DN Button Radio mode: SEEK (DN) Button CD mode: Press the button to go bac k to the beginning of the current track. 9 f UP Button Radio mode: SEEK (UP) Button CD mode: Press the button to adv ance to the beginning of the next trac k.
39 -EN Battery Replacement Applicable battery: Use two “AAA” sized dr y batter ies or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing the direction of arrow . 2 Replacing the battery Put the batteries in the case obser ving the polarities as illustrated.
40 -EN Remote Contr ol Operation Operating the A udio Pr ocessor Equalizer Presets Recalling the Stored Equalizer Curve Recalling the Stored Time Correction Recalling the Stored Crosso ver EQ mode →.
41 -EN Information CD CD Player/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD. - Allo w the vehicle's interior (or trunk) temperature to cool. CD pla yback sound is wavering. • Moisture condensation in the CD Module.
42 -EN Indication for CD Pla yer • Protecti ve circuit is activ ated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • No CD is inserted. - Insert a CD. • Although a disc is inserted, “ NO DISC ” is displayed and the unit does not start to play or eject the disc.
43 -EN Indication f or XM Radio Mode • The XM antenna is not connected to the XM radio module. - Check whether the XM antenna cable is attached securely to the XM radio module. • Radio is being updated with latest encryption code. - W ait until encryption code is being updated.
44 -EN Installation and Connections Caution HA VE THE WIRING AND INSTALLA TION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. T o ensure safety , always contact the dealer where you purchased this product to hav e the work done.
45 -EN Installation Caution (CD A-7897 only) Do not block the unit ’ s fan or heat sink, thus prev enting air circulation. If blocked, heat will accumulate inside the unit and may cause a fire. 1 Slide mounting slee ve from main unit (see "Remo val" on this page).
46 -EN Installation and Connections Connections T o prevent external noise fr om entering the audio system. • Locate the unit and route the leads at least 10 cm away from the car harness. • Keep the battery po wer leads as far a way from other leads as possible.
47 -EN & Left Rear (+) Speaker Output Lead (Green) (CD A-7897 only) ( Left Rear (–) Speaker Output Lead (Green/Blac k) (CD A-7897 only) ) Left F ront (–) Speaker Output Lead (White/Black) (CD .
48 -EN.
GARANTIE LIMITÉE Fidèles à leur engagement de ne fournir que des produits de qualité, ALPINE ELECTRONIQUE DE L'AMERIQUE INC. et ALPINE ELECTRONIQUE DU CANADA INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggérons de le lire attentivement et en entier.
LIMITED W ARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.
Een belangrijk punt na aankoop van elk apparaat Alpine CDA-7998 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alpine CDA-7998 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alpine CDA-7998 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alpine CDA-7998 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alpine CDA-7998 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alpine CDA-7998 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alpine CDA-7998 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alpine CDA-7998 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
