Gebruiksaanwijzing /service van het product CVA-1003 van de fabrikant Alpine
Ga naar pagina of 56
EN FR ES ES IT SE R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
CD changer for CV A-1003. Changeur CD pour CV A-1003. Cambiador de CD para CV A-1003. CHA-S624 CD changer for CV A-1003. Changeur CD pour CV A-1003. Cambiador de CD para CV A-1003. CHA-1214 CHM-S620 Alpine CD Changers Give Y ou More! More m usical selections, more versatility , more con venience.
ENGLISH Contents Operating Instructions W ARNING W ARNING .................................................. 3 CA UTION ................................................... 3 PRECA UTIONS ......................................... 4 Basic Operation Detaching the Front Panel .
Other Useful Features Displaying the T itle/T ext ................................. 26 Setting the Bass Control ................................. 28 Setting the Treble Control ............................... 29 Switching Phase ........................
3 -EN W ARNING WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. INST ALL THE PRODUCT CORRECTL Y SO THA T THE DRIVER CANNOT WA TCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
4 -EN PRECAUTIONS T emperature Be sure the temperature inside the vehicle is between +45 ° C (+113 ° F) and 0 ° C (+32 ° F) before turning your unit on. Maintenance If you hav e problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
5 -EN Intr oduction Y ou can operate most of the functions of this unit with the monitor displa y open or closed (e xcept some operations). For operations with the monitor display c losed, refer to page 41.
6 -EN Basic Operation Detaching the Fr ont P anel 1 Press and hold the PWR (P ower) b utton for more than 2 seconds to turn off the power . 2 Press the (Release) b utton at lower left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out.
7 -EN Basic Operation T urning P ower On and Off Some of this unit's functions, cannot be perf or med while the vehicle is in motion. Be sure to stop y our vehicle in a saf e location and apply the parking brake , before attempting these operations .
8 -EN Basic Operation MUTE OPEN/CLOSE ANGLE 7 7 7 7 7 8 8 8 8 8 MODE/LOUD Lo wering the Monitor 1 Press the OPEN/CLOSE button. The unit will beep 3 times and low er the monitor automatically . NO TES • The CV A-1003 is a pr ecision device. W ith gentle handling, its unique capabilities can be enjoyed for a long time.
9 -EN Basic Operation Adjusting V olume/Balance (Between Left and Right)/F ader (Between Front and Rear) 1 Press the MODE button repeatedly to choose the desired mode.
10 -EN Radio Operation A.ME/TUNE BAND SOURCE g g g g g DN f f f f f UP Preset buttons (1 through 6) Manual T uning 1 Press the SOURCE b utton until a radio band and frequency appears in the displa y . 2 Press the B AND button repeatedly until the desired radio band is displa yed.
11 -EN Radio Operation Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory . 2 Press and hold any one of the Preset b uttons (1 through 6) f or at least 2 seconds until the station frequency (sub display) or preset n umber (monitor display) on the displa y blinks .
12 -EN XM Radio Operation (Optional) Receiving the XM Channels with the XM Receiver (Optional) XM Satellite Radio * is the ne xt generation of audio enter tainment, with up to 100 brand-new digital channels. F or a small monthly fee , subscribers can hear cr ystal-clear music, sports, news and talk, coast-to-coast via satellite .
13 -EN XM Radio Operation (Optional) Storing of XM Channel Presets 1 Press the B AND button to select the desired band (XM1 or XM2) you w ant to store.
14 -EN XM Radio Operation (Optional) Changing the Displa y T ext inf ormation, such as the channel name, ar tist name/f eature, and song/progr am title, is av ailable with each XM channel. The unit can display this text inf ormation as explained below .
15 -EN CD Player/Changer Operation (Optional) : : : : : / J J J J J SOURCE g g g g g DN f f f f f UP Example of CD Mode Screen Volume Level Current Time Elapsed playing time Selected Source Pla ying Optional CD Play er or Changer When an optional Alpine CD play er or CD changer is connected, you can control it from the CV A-1003.
16 -EN CD Player/Changer Operation (Optional) F ast Forwar d and Backwar d 1 Press and hold the g DN or f UP b utton to quickly mo ve backw ard or forward until y ou reach the desired section of the trac k. Repeat Pla y 1 Press the RPT (Repeat) button to pla y back repeatedly the trac k being play ed.
17 -EN CD Player/Changer Operation (Optional) Scanning Programs 1 Press the SCAN button to activ ate the Scan mode. The first 10 seconds of each trac k will be pla yed back in succession. T o stop scanning, press the SCAN button and deactivate the Scan mode .
18 -EN Erasing Disc Title 1 When the monitor displa y is open, press the TITLE b utton to select the disc titling mode. Then, press and hold f or at least 3 seconds. 2 Press and hold the - / J b utton for at least 2 seconds to activ ate the title scanning mode.
19 -EN CD Player/Changer Operation (Optional) 2 Press the Disc Select buttons (1 thr ough 6) corresponding to one of the discs loaded in the CD Changer . The selected disc number appears in the displa y and CD pla yback star ts. NO TES • After selecting the desir ed disc, you can operate in the same way as for the CV A-1003 CD player .
20 -EN MD Player Operation (Optional) Pla ying Mini-Disc (MD) When an optional Alpine MD pla yer is connected to the CV A-1003, y ou can control the play er from the CV A-1003. (When the MD A-5051 is connected, MDs can be play ed back only .) 1 Press the SOURCE b utton until the "MD" appears in the displa y .
21 -EN MD Player Operation (Optional) F ast Forwar d and Backwar d 1 Press and hold the g DN or f UP button to quickly mo v e backw ard or f orward until you reach the desired section of the track. When you reach the desired section, release the button.
22 -EN Cassette Player Operation (Optional) Contr olling Cassette Pla yer If an optional Alpine cassette pla yer is connected to the CV A-1003, it can be controlled from the CV A-1003. 1 Press the SOURCE button until the "T APE" appears in the displa y .
23 -EN DVD/V ideo CD/CD Player Operation (Optional) Playing D VD/Video CD/CD If an optional Alpine D VD/video CD/CD pla yer is connected to the CV A-1003, y ou can control it from the CV A-1003. W ARNING It is dangerous (and illegal in many states) f or the driver to watch the TV/Video while driving the vehicle .
24 -EN DVD/V ideo CD/CD Player Operation (Optional) F ast Forwar d/Backwar d 1 Press and hold the g DN or f UP button during play to f ast backward or f orward respectively . Release the button when you reach the desired portion you wish to play . Playbac k star ts from that por tion.
25 -EN Navigation System Operation (Optional) T urning on the Navigation Mode If an optional Alpine Navigation System is connected , The display sho ws the navigation screen.
26 -EN Other Useful Features Displa ying the Title/T ext It is possible to displa y the CD title if the title has been pre viously inputted. F or details, see Titling Discs (page 17). Y ou can displa y disc/track names during playbac k of CD text discs or MDs with input titles.
27 -EN MD mode: The monitor display is open. (display ed in the monitor display) MD mode: The monitor display is closed. (display ed in the sub monitor) NO TES • Some character s may not be displayed corr ectly with this device, depending on the c haracter type.
28 -EN Other Useful Features Setting the Bass Contr ol Y ou can change the Bass F requency emphasis to create your o wn tonal preference. 1 When the monitor displa y is open, press the bass engine button. Bass engine mode is displa yed in the monitor displa y .
29 -EN Other Useful Featur es Setting the T reble Contr ol Y ou can change the T reble F requency emphasis to create your own tonal pref erence. 1 When the monitor displa y is open, press the bass engine button. Bass engine mode is display ed in the monitor display .
30 -EN Other Useful Features Switching Phase Bef ore switching Phase, select the Subwoof er ON (ref er to "Subwoof er Control On and Off" on page 38). 1 Press the bass engine button to turn on the Bass engine mode. 2 Press the Preset 3 button to select Subw oofer Phase mode.
31 -EN Other Useful Featur es Illumination Contr ol T o displa y the SETUP screen: T o displa y the Setup screen, your v ehicle must be parked with the ignition ke y in the ACC or ON position. T o do this, follo w the procedure below . 1. Push the foot br ake to bring your vehicle to a complete stop at a saf e location.
32 -EN Other Useful Features Adjusting Color of Picture Color adjustment can be made only in the navigation, D VD , A UX1 and A UX2 modes. Color adjusment cannot be made if a Na vigation system with the RGB f eature is connected.
33 -EN Other Useful Featur es Switching the Bac kground Screen After carr ying out the steps 1 to 3 of "T o display the SETUP screen" described on page 31, perf or m the operation show belo w . 1 When the monitor displa y is open, press and hold the SETUP button f or at least 2 seconds.
34 -EN Other Useful Features Setting A utomatic Opening/ Closing of Monitor When the A utomatic Opening/Closing mode is "A UTO ," the monitor automatically opens when the ignition ke y is tur ned to the "ACC" or "ON" position.
35 -EN Other Useful Featur es Setting the Cloc k Display After carr ying out the steps 1 to 3 of "T o display the SETUP screen" described on page 31, perf or m the operation show belo w . 1 When the monitor displa y is open, press and hold the SETUP button f or at least 2 seconds.
36 -EN Selecting Rear Monitor When using the optional e xpansion BO X (KCE- 103V), If A UX/NA V . is to ON in "Setting the External Input (page 37), and if a rear-seat monitor and na vigation system are connected to the CV A-1003, y ou can switch the picture/sound of the rear-seat monitor from the CV A-1003.
37 -EN Other Useful Featur es Setting the External Input After carr ying out the steps 1 to 3 of "T o display the SETUP screen" described on page 31, perf or m the operation show belo w . 1 When the monitor displa y is open, press and hold the SETUP button f or at least 2 seconds.
38 -EN Other Useful Features Subw oofer Contr ol On and Off After carrying out the steps 1 to 3 of "T o display the SETUP screen" described on page 31, perform the operation show belo w . 1 When the monitor displa y is open, press and hold the SETUP b utton f or at least 2 seconds.
39 -EN → → → → Other Useful Featur es Setting the External Expansion Bo x When using the optional expansion bo x (KCE- 103V), you can use this function. After carr ying out the steps 1 to 3 of "T o display the SETUP screen" described on page 31, perf or m the operation show belo w .
40 -EN Other Useful Features FUNC Switching Displa y Modes After carrying out the steps 1 to 3 of "T o display the SETUP screen" e xplained on page 31, perf orm the operation described below . 1 Press and hold the FUNC b utton f or at least 2 seconds in the A UX or NA V .
41 -EN Basic Operation T ur ning P ower On and Off ...................................... 7 Adjusting V olume/Balance (Between Left and Right)/ F ader (Between F ront and Rear) ..................... 9 T ur ning Loudness On and Off ....................
42 -EN Information In Case of Difficulty If y ou encounter a prob lem, please revie w the items in the f ollowing chec klist. This guide will help y ou isolate the prob lem if the unit is at f ault. Otherwise , make sure the rest of y our system is properly connected or consult y our authorized Alpine dealer .
43 -EN Information Indication f or XM Radio Mode • The XM antenna is not connected to the XM radio module. - Check whether the XM antenna cable is attached securely to the XM radio module. • Radio is being updated with latest encryption code. - W ait until encryption code is being updated.
44 -EN Information Specifications MONIT OR SECTION Screen Size 6.5" LCD T ype T ransparent type TN LCD Operation System TFT activ e matrix Number of Picture Elements 336,960 pcs. (1,440 × 234) Effecti ve Number of Picture Elements 99.99% or more Illumination System U-shaped cold cathode fluorescent tube.
45 -EN Installation and Connections Before installing or connecting the unit, please read the following and pa g es 3 and 4 of this manual thoroughl y for proper use. W arning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in f ire or product damage.
46 -EN Installation and Connections Installation Installing the Monitor • Location Bef ore final installation, make sure the displa y will not hamper gear shifting when it is opened and closed in the chosen location. NO TE Install at an angle within 30 de grees fr om horizontal.
47 -EN Installation and Connections T o pre vent external noise fr om entering the audio system. • Locate the unit and route the leads at least 10 cm away from the car harness. • K eep the battery power leads as f ar away from other leads as possible.
48 -EN Ai-NET NORM EQ/DIV ) ! " # $ % & ( ~ 9 8 7 6 5 4 2 3 1 + - , . / : Installation and Connections Basic Connections Antenna T o remote input lead. T o the f oot brake cord or brake lamp cord. T o the instrument cluster illumination lead.
49 -EN Installation and Connections 1 Antenna Receptacle 2 Remote Control Interface Connector Connect to the remote control interface box. 3 Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.
50 -EN 8 # # 9 " ! 7 5 4 6 2 3 1 (NVE-N852A/NVE-N871A) Ai-NET NORM EQ/DIV 9 7 4 % $ 6 Ai-NET NORM EQ/DIV Installation and Connections System Example 1: Refer also to Basic Connections. ∗ When Subwoofer is set to OFF: Output is fr om Rear speakers.
51 -EN Installation and Connections 1 Rear/Subwoof er Output RCA Connectors RED is right and WHITE is left. 2 RCA Extension Cable (Sold Separetely) 3 RGB Cable (Included with NVE-N852, not included with NVE-N871A) 4 Ai-NET Connector Connect this to the output or input connector of other product equipped with Ai-NET .
52 -EN (TME-M750A) (NVE-N852A/NVE-871A) Ai-NET NORM EQ/DIV ON OFF ∗∗ ) ! " , - . : / % & ( + ~ 9 6 6 5 4 2 ; 7 1 1 # $ 3 1 8 Installation and Connections System Example 2 (connecting to KCE-103V (Optional)): Refer also to Basic Connections.
53 -EN Installation and Connections 1 RCA Extension Cable (Sold Separetely) 2 Rear/Subwoof er Output RCA Connectors RED is right and WHITE is left. 3 Ai-NET Connector Connect this to the output or input connector of other product equipped with Ai-NET .
54 -EN.
Een belangrijk punt na aankoop van elk apparaat Alpine CVA-1003 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alpine CVA-1003 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alpine CVA-1003 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alpine CVA-1003 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alpine CVA-1003 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alpine CVA-1003 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alpine CVA-1003 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alpine CVA-1003 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
