Gebruiksaanwijzing /service van het product PICTOGRAPHY 3500 van de fabrikant FujiFilm
Ga naar pagina of 63
DIGIT AL IMA GE PRINTER PICTR OGRAPHY 3500 PRINTER DRIVER SOFTW ARE PP3-B482E3 INSTRUCTION MAN UAL Thir d Edition.
LICENSING AGREEMENT 1. Copyright The copyright for this software is owned by Fuji Photo Film Co., Ltd. (“FUJI”). 2. Prohibitions Y ou may not (1) copy , modify or adapt any or all parts of this software; (2) provide this software to a third party in the from of a copy , loan or gift; or (3) reverse engineer this software.
1 INTRODUCTION ● This manual gives procedures for installing and using the PICTROGRAPHY 3500 printer driver , as well as several precautions. ● This software requires a SCSI adapter . Before installation, check that a functioning SCSI adapter has been installed in your computer .
2 CONTENTS 1. PRINTER DRIVER ........................................................................................................... 4 1.1 Outline ....................................................................................................
3 3.6 Macintosh (Mac OS 9 or earlier) ............................................................................................. .... 33 3.6.1 For Local Printing ......................................................................................
4 1.1 Outline The PICTROGRAPHY 3500 is capable of delivering ultrahigh, image-quality prints having a near-photograph appearance coupled with rich expressive power . Resolution is a high 400 dpi (max.) and 16,700,000 colors are available, all implemented by a laser-exposed thermal development transfer system (the silver halide photographic system).
5 This section explains various items that need to be set up before you can use the printer driver . 2.1 Windows 2.1.1 Setting up the PICTROGRAPHY The PICTROGRAPHY 3500 is shipped from the factory with its device type set to [Printer] . T o use the printer with W indows 95 (V er- sion 4.
6 3.1 Windows 95 3.1.1 Connecting the PICTROGRAPHY 3500 for the first time Unless the printer driver is already installed, when you start your computer with PICTROGRAPHY 3500 for the first time, one of the following windows is displayed as W indows 95 starts, depending on your specific version of W indows 95.
3. INST ALLA TION 7 for UC type 6. Click the [Finish] button. The following is displayed when the file is copied: In certain cases, the following prompt may be displayed when you copy the file: [The file ‘PG35. DRV’ on Windows 95 CD- ROM could not be found.
3. INST ALLA TION 8 6. Click the [Have Disk] button. The [Install From Disk] screen appears. 7. Enter the following location in the [Copy manufacturer ’ s files from:] field. For CE T ype: E:W in95_98EnglishCE (*If your CD-ROM drive is E: drive) For UC T ype: E:W in95_98EnglishUC (*If your CD-ROM drive is E: drive) 8.
3. INST ALLA TION 9 3. Click the [FUJIFILM PICTROGRAPHY3500] icon and click [Sharing...] on the [File] menu. 4. The [FUJIFILM PICTROGRAPHY3500 Properties] dialog box is displayed. 5. Select [Shared As:] . 6. Set a Share Name. The default Share Name is currently displayed on the screen.
3. INST ALLA TION 10 6. Make the appropriate setting in [Network path or queue name:] . Specify the server name to which the PICTROGRAPHY 3500 is connected on the network and its Share Name.
3. INST ALLA TION 11 3.1.4 Uninstall The printer driver uninstall procedure is described below: 1. Select [Setting] > [Printer] from the [Start] menu. The [Print- ers] folder window appears. 2. Click the [FUJIFILM PICTROGRAPHY3500] icon, then click [Delete] from the [File] menu.
3. INST ALLA TION 12 6. Confirm that the FUJIFILM PICTROGRAPHY3500 driver file has been detected. Click the [Next] button. The following is displayed when the file is copied: 7. For the remainder of the installation procedure, skip to step 10 in "3.
3. INST ALLA TION 13 8. Click the [OK] button. The following appears: 9. Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button. The following is displayed when the file is copied: 10. Select [PICTRO SCSI: FUJIFILM PICTRO SCSI Port] in [Available ports:] and click the [Next] button.
3. INST ALLA TION 14 4. The [FUJIFILM PICTROGRAPHY3500 Properties] dialog box is displayed. 5. Select [Shared As:] . 6. Set a Share Name. The current default Share Name is displayed. Y ou may select any printer in place of the default printer . Enter the comment and password, if required.
3. INST ALLA TION 15 6. Make the appropriate setting in [Network path or queue n ame:] . Specify the server to which the PICTROGRAPHY 3500 is con- nected on the network and its sharing name.
3. INST ALLA TION 16 3.2.4 Uninstall The printer driver uninstall procedure is described below: 1. Select [Setting] > [Printer] from the [Start] menu. The [Print- ers] folder window is displayed. 2. Click the [FUJIFILM PICTROGRAPHY3500] icon, then click [Delete] from the [File] menu.
3. INST ALLA TION 17 7. Enter the following location in the [Copy manufacturer ’s files from:] field. For CE T ype: E:W in95_98EnglishCE (*If your CD-ROM drive is E: drive) For UC T ype: E:W in95_98EnglishUC (*If your CD-ROM drive is E: drive) 8.
3. INST ALLA TION 18 14. Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button. The following appears. 15. Specify a printer name in the field currently displaying the name of the default printer .
3. INST ALLA TION 19 3.3.2 For Network Printing For network printing, install printer drivers in both the server and client computers by the respective procedures described below . 3.3.2.1 Installing to the server 1. T o install the printer driver , follow steps 1.
3. INST ALLA TION 20 7. Choose either [Y es] or [No] . Click the [Next] button. The following appears: 8. Click the [Finish] button. If installation of the printer driver is complete, the icon for the new printer will appear in the [Printers] folder window .
3. INST ALLA TION 21 4. Click the [Add Port] button. The [Printer Ports] dialog box is displayed. 5. Click the [New Port T ype] . The [Installing Print Monitor] dialog box is displayed. 6. Enter CE T ype D:W in2k_XPEnglishCE (*If your CD-ROM drive is D: drive) in the [Copy files from:] field.
3. INST ALLA TION 22 9. Now install the printer . Click the [Add Printer] icon in the [Printers] folder window . The [Add Printer Wizard] dialog box is displayed. 10. Click the [Next] button. The following appears. 11 . Select [Local Printer] and uncheck [Automatically detect and install my plug and Play printer] .
3. INST ALLA TION 23 14. Click the [OK] button. The following appears. 15. Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button. The following appears. 16. Specify a printer name in the field where the name of the default printer is currently displayed.
3. INST ALLA TION 24 20. If you chose to print the test page in step 18, the following screen is displayed. If the test page prints without problems, click the [Y es] button. Otherwise, click the [T roubleshoot] button and perform trouble- shooting as instructed on-screen.
3. INST ALLA TION 25 3. Enter the location of the printer in the [Location] field and the description of the printer in the [Comment] field, or click the [Next] button without entering anything. 4. Continue installation of the printer driver according to the pro- cedure described in step 18 and subsequent steps in "3.
3. INST ALLA TION 26 The [Shared Printer] field displays the names of the computers connected to the network. Double-click the name of the server to which the PICTROGRAPHY 3500 is connected. Select a share name for the printer . This selection sets the network path in the [Printer] field.
3. INST ALLA TION 27 3.5.1 For Local Printing To enable local printing, install the printer driver as follows. 1. Insert the PICTROGRAPHY3500 Printer Driver CD-ROM into the PC. 2. Click to select [Printers and Faxes] from the [Start] menu. The [Printers and Faxes] folder window is displayed.
3. INST ALLA TION 28 7. Confirm that [FUJIFILM PICTRO SCSI Port] appears in the [Available port types] field, click the [New Port] button, and then click the [Close] button. The following is displayed when the file is copied. 8. Confirm that [PICTRO SCSI:] appears in [Ports on this server] , and then click the [Close] button.
3. INST ALLA TION 29 13. Click the [Next] button. The following appears. 14. Click the [Have Disk] button. The [Install From Disk] dialog box is displayed. 15. Enter: CE T ype D:W in2k_XPEnglishCE (*If your CD-ROM drive is D: drive) into the [Copy manufacturer’s files from] field.
3. INST ALLA TION 30 19. Select [Do not share this printer] , and then click the [Next] button. The following appears. 20. Choose to print or not print a test page following the completion of printer driver installation. Make your selection and click the [Next] button.
3. INST ALLA TION 31 [Installation Procedure] (1) Install the printer driver to the server computer (W indows NT 4.0) as described in "3.3.2.1 Installing to the server ." (2) Install the printer driver to the client computers as described in "3.
3. INST ALLA TION 32 5. Select [A network printer, or a printer attached to another computer] , and then click the [Next] button. The [Specify a Printer] dialog box is displayed. 6. Select [Connect to this printer (or to browse for a printer , select this option and click Next)] .
3. INST ALLA TION 33 9. Click the [Finish] button. If installation of the printer driver finishes without problems, the icon for the new printer appears in the [Printers and Faxes] folder window . 10. Restart the computer . This completes the installation of the printer driver .
3. INST ALLA TION 34 4. Click the installed (copied) [PictroGraphy] folder and open the [Sharing] menu in the Finder . W ith Mac OS 8.5 or later versions, select the [File] > [View Information] > [Sharing] menu in the Finder . W ith earlier Mac OS versions, select the [File] > [Sharing] menu in the Finder .
3. INST ALLA TION 35 6. Choose the [PictroGraphy] folder and click the [OK] button. This places the server's [PictroGraphy] folder on the desktop. 7. Click [PictroGraphy 3500] in the [Chooser] window . Y ou will be prompted as follows: "Connection to server not set.
3. INST ALLA TION 36 5. Click the [Continue] button. The following dialog box appears. 6. Select a destination volume to install the printer driver and then click the [Continue] button. The following dialog box appears. 7. Click the [Install] button. The following dialog box appears.
3. INST ALLA TION 37 13. Click [Network] . The [Network] window appears. Select [Built-in Ethernet] from the [Show] pop-up menu and then click the [TCP/IP] tab. The following appears. Confirm that the TCP/IP settings are correct, and then close the window .
3. INST ALLA TION 38 18. Select [FUJIFILM Pictro SCSI] from the pop-up menu. When a PICTROGRAPHY 3500 connected to the computer is found, its printer name is displayed on the [Product] column. 19. Select the PICTROGRAPHY 3500 to be used and then click the [Add] button.
3. INST ALLA TION 39 5. Click the [Services] tab. The following appears. 6. Mark the [Printer Sharing] check box with a " √ " and close the [Sharing] window .
3. INST ALLA TION 40 The [Printer Info] window appears. * Displayed information cannot be changed from the client computers. 3.7.3 Uninstall The printer driver uninstall procedure is shown below . Even if the uninstall procedure below is performed, the installed printer driver files are not deleted.
41 4. USING THE PRINTER DRIVER 4.1 Windows This subsection describes printing in W indows 95, W indows 98, W in- dows NT 4.0, W indows 2000 or W indows XP environments.
4. USING THE PRINTER DRIVER 42 for UC type • Paper size Select a paper size for printing. Note that the printable paper size depends on the type of paper currently loaded in the PICTROGRAPHY 3500. • Direction of paper Choose Portrait or Landscape.
4. USING THE PRINTER DRIVER 43 ON2 (Photo): Produces somewhat softer prints. Intended for monitors having color tempera- tures of 6500K and γ 1.8. ON3 (sRGB): Suitable for printing with an sRGB* 3 moni- tor . As compored with ON1 setting, ON3 set- ting enables to print saturated colors lower in brightness and higher in saturation.
4. USING THE PRINTER DRIVER 44 2. Canceling printing In the [FUJIFILM PICTROGRAPHY3500] window , click the document for which you want to cancel printing. Then select [Cancel Print] from the [Document] menu to cancel printing. * In W indows NT 4.0, W indows 2000 or W indows XP select [Cancel] on the [Document] menu.
4. USING THE PRINTER DRIVER 45 • [Spool Settings...] button Click this button to change print spool settings. Clicking the button displays the following window .
4. USING THE PRINTER DRIVER 46 4.1.5.2 Windows NT 4.0 1. Paper setting (Default value) Click to select [Setting] > [Printer] from the [Start] menu. This opens the [Printers] folder window . Click the [FUJIFILM PICTROGRAPHY3500] icon, then select [Properties] on the [File] menu.
4. USING THE PRINTER DRIVER 47 4. Scheduling Click the [Scheduling] tab on the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box. The following screen appears: This setting does not need to be changed for normal use. 5. Paper setting Click the [Paper setting] tab on the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box.
4. USING THE PRINTER DRIVER 48 Here, you can add or delete profiles related to the printer . Note that profiles for the PICTROGRAPHY 3500 were added when the printer driver was installed. Under normal conditions, these settings should not be altered. 6.
4. USING THE PRINTER DRIVER 49 7. Image processing setting Click the [Image processing setting] tab in the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box. These setting can be viewed but not modified. 4.1.6 ICM 1. Color matching by ICM ICM is a W indows color management function.
4. USING THE PRINTER DRIVER 50 When not checked: * When printing from Photoshop, set the image resolution to 400dpi. If the resolution is set to any other resolution except 400dpi, jaggies may appear on images. * When placing image data in PowerPoint, set the image reso- lution to 400dpi.
4. USING THE PRINTER DRIVER 51 • ColorSync Check here to use the Mac OS color management function (ColorSync). * The printer driver supports ColorSync version 2.5 or later . The driver is incompatible with earlier versions. * For network printing, the server copy of ColorSync must also be version 2.
4. USING THE PRINTER DRIVER 52 Application Indicates the name of the application for the name: print file. User name: Indicates the name of the user printing the file.
4. USING THE PRINTER DRIVER 53 • Paper Size Select a paper size for printing. Note that the printable paper size depends on the type of paper currently loaded in the PICTROGRAPHY 3500. • Orientation Select an orientation of printing. 2. Setting print conditions Open the print data file and then select [Print] from the [File] menu.
4. USING THE PRINTER DRIVER 54 OFF: Disables printer color matching. W ith this option selected, gray reproduction is deter- mined by settings for [Gray balance] . • Gray balance Select gray gradation and color balance, if Image process is set to OFF .
4. USING THE PRINTER DRIVER 55 Printing of the suspended print job is held if you click the document name in the Spool List Display area and then click the [Hold] button.
56 This section describes error messages associated with the PICTROGRAPHY 3500 printer driver . • PICTROGRAPHY not found. Check to see if the PICTROGRAPHY 3500 is powered on. Check to see if the PICTROGRAPHY 3500 and host computer are properly connected.
5. ERROR MESSAGES 57 Macintosh: • Failed to obtain printer information. Reselect printer using selec- tor . Reselect the PICTROGRAPHY 3500 with [Chooser] . • Connection to server not set. Set an appropriate server . Network printing requires a server .
58 6.1 Windows 1. Installing the printer driver without connecting the PICTROGRAPHY 3500 (W indows 95/98) While it is possible to install the printer driver in a computer without first connecting the .
6. RESTRICTIONS 59 4. About the print quality of rotated characters The print quality obtained when printing rotated characters de- pends on the application from which printing occurs.
6. RESTRICTIONS 60 • On [Printer List] of Print Center, shared printers are displayed with a colored background. • If a computer runs Mac OS X 10.1.x or earlier (including Mac OS 9 or earlier), the computer cannot recognize the printers shared with the printer sharing function of Mac OS X 10.
FUJI PHOTO FILM CO., LTD. Printed on Recycled Paper in North America FUJI PHOTO FILM U.S.A., INC. 555 Taxter Road, Elmsford, N.Y. 10523, U.S.A. FUJI PHOTO FILM CANADA INC. 275 Britannia Road East, Mississauga, Ontario, L4Z 2E7, Canada FUJI PHOTO FILM HAWAII, INC.
Een belangrijk punt na aankoop van elk apparaat FujiFilm PICTOGRAPHY 3500 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen FujiFilm PICTOGRAPHY 3500 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens FujiFilm PICTOGRAPHY 3500 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding FujiFilm PICTOGRAPHY 3500 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over FujiFilm PICTOGRAPHY 3500 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van FujiFilm PICTOGRAPHY 3500 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de FujiFilm PICTOGRAPHY 3500 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met FujiFilm PICTOGRAPHY 3500 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
