Gebruiksaanwijzing /service van het product P3PC-1132-07ENZ0 van de fabrikant Fujitsu
Ga naar pagina of 122
Operator's Guide P3PC-1 132-07ENZ0 5000N.
.
fi-5000N Operator’s Guide i CONTENTS INTRODUCTION.................... ......................................................... v ■ Regulatory Information ......................................................... v ■ Note, Liability ............
ii 3.7 Pull Mode User Authenti cation Settings ........................ 21 3.8 Push Mode Automatic Lo gout Time Settings ................ 23 3.9 Host Connection Time -out ........................ ....................... 24 3.10 Displaying Device In formation .
fi-5000N Operator’s Guide iii Chapter 6 User Authen tication .............................................. 69 6.1 Fingerprint Registra tion ...................... ............................. 70 6.2 User Authentication by Fingerprint .............
iv.
fi-5000N Operator’s Guide v INTRODUCTION Thank you for purchasing the fi-5000N. This document describ es how to han dle fi-5000N and b asic operation methods. Before you start using it, be sure to thoroughly read this ma nual to ensure a correct use.
vi Bescheinigung des Her stellers / Impor teurs Für den fi-5000N wir d folgendes bescheinigt: • In Übereinsstimmung mit de n Bestimmungen der EN4501 4(CE) funkentstört • Maschinenlärminformationsverordnung 3 . GPSGV : Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger , gemäß EN ISO 7779.
fi-5000N Operator’s Guide vii The A uthentication Data may be categorized as per sonal data and ma y be subject to v arious data pr ot ection and privacy l aws. Y ou are responsible f or ensuring all use is in compliance with all such applicable la ws.
viii Manufacturer PFU LIMITED International Sales Dept., Imaging Business Division, Products Grou p Solid Square East T ower , 580 Horikawa-cho, Sa iwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan Phone: (81- 44) 540-4538 All Rights Reserved, Copyr ight© PFU LIMITED 20 04-2009 About Maintenance The user must not perform repairs on this device.
fi-5000N Operator’s Guide ix Screen Examples In This Manual The screen examples in this manual are subject to change without notice in th e interest of product improvement.
x ■ Safety Precautions Do not damage the A C cable. A damaged AC cable may cause fir e or electr ic sh ock. Do not place heavy object s on AC cables, or pull, bend, twist, hea t, damage or modify AC cables. Do not use damaged AC cables or power plu gs, or install any cables or power plugs to loose wall sockets.
fi-5000N Operator’s Guide xi T urn the device OFF if it is damaged. If the device is damaged for any r eason, tu rn the device off and unplug the power cable. Contact the store wh ere you purc hased the device . Do not put liquids inside the de vice .
xii Do not install the devi ce on unstab le surfaces. Make sure tha t the device is installed on a fla t, level surfac e and that none of its part s extend beyond the surface top, such as a desk or t able. Do not in stall the device on unstable surfa ces.
fi-5000N Operator’s Guide xiii Disconnect the power plug fr om the power outlet when the device is not used f or a long period of time . When the device is not going to be used for a long per iod of time, be sure to disconnect the power p lug from the power outlet.
xiv.
1 fi-5000N Operator’s Guide 1 Chapter 1 Overview of fi-5000N 1.1 Overview ........................... ..................................................... ............................. 2 1.2 Features ...................................... .........
2 1.1 Overview The function of the fi-5000 N is to connect a fi-s eries scanner to a computer through the network. This framework is shown in the diagram below.
1.2 Features fi-5000N Operator’s Guide 3 Ov er view of f i-5000N 1 1.2 Features 1. Simple and secure operator iden tification with fingerprint a uthentication With the fingerprint authentication technology, th e user can be easily identified by a touch of a finger.
4 1.3 Examples of Operation There are two ways to perfo rm scanning docume nts using fi-5000N. 1. Pull mode scanning Computer with scanning appli cation scan the documents from the scanner on the network and capture the image data. This is called Pu ll mode because the imag e data is pulled from the scanner to the computer via the network.
1.3 Examples of Operation fi-5000N Operator’s Guide 5 Ov er view of f i-5000N 1 Two types of users are assumed for the fi-5000N: Administrator and the operator of the fi-5 000N.
6.
fi-5000N Operator’s Guide 7 2 Chapter 2 Names and Functions of Part s 2.1 Names of Parts ................................................ ........................................... ........ 8 2.2 Keyboard ...........................................
8 2.1 Names of Parts This section describes the device’s parts. ■ Front Part Name Function Cover Protects the Keyboard. Sticker Correct placement of finger is described. Message Display Displays the settings and status of the fi-5000N. Keyboard It is used for settings and PIN entry.
2.1 Names of Parts fi-5000N Operator’s Guide 9 Names and Functions of P ar ts 2 ■ Rear Part Name Function DC Inlet Used for connecting the AC cable. Power Switch Used for turning ON/OFF the fi-5000N. Network Connector Used for connecting a network cable (LAN).
10 2.2 Keyboard The following illustration shows the keyb oard located unde r the white cover. This keyboard is used for th e following operatio ns: • Fingerprint registration • Login by PIN • f.
3 fi-5000N Operator’s Guide 11 Chapter 3 Inst alling the fi-5000N 3.1 Installing the Scanner ........................... .......................................... ................. 12 3.2 Installing the fi-5000N ....................................
12 3.1 Installing the Scanner Install the scanner following the installation requirements described in your fi-series scanner man- ual. 3.2 Installing the fi-5000N 1. Place the fi-5000N at its installation site. Install this product near the scanner. Install it in a place that does not affect the operation or maintenance of the scanner.
3.2 Installing the fi-5000N fi-5000N Operator’s Guide 13 Installing the fi-5000N 3 3. Connect the USB cable to the USB connector. 4. Connect the other end of the USB interfa ce cable to the scanner. ATTENTION Be sure to use the USB cable provided with the scanner.
14 3.3 fi-5000N's Settings and Connecting to the Network 1. Turn on the power of the scanner and fi-5000N. Refer to the scanner manual for details on turning on the power of the scanner. Turn on the fi-5000N by pressing the "|" of th e power switch located at the back of the fi- 5000N.
3.3 fi-5000N's Settings and Connecting to the Network fi-5000N Operator’s Guide 15 Installing the fi-5000N 3 3. Open the cover and press the [SET] key. The following settings screen appears. 4. With the [ L ] key, select "Administrator Setup", and pre ss the [ENT] key.
16 8. Enter the IP address. The currently configured IP address is displa yed on the entry field. To change, press the [ESC] key once to clear the entry field. Press the [ENT] key after you have entered the cor- rect address. 9. Enter the subnet mask next.
3.3 fi-5000N's Settings and Connecting to the Network fi-5000N Operator’s Guide 17 Installing the fi-5000N 3 12. Press the [ K ] or [ L ] key to select one from amon g "Auto Negotiation", "100BASE-TX Full", "100BASE-TX Half", "10BASE-TX Full" and "10BASE-TX Half", and press the [ENT] key.
18 3.4 Changing the Language Setting You can choose the language fo r the Message Display from Eng lish, Japanese, French, German, Italian and Spanish. (The default setting is English.) To change the language settin g, follow the procedure below. 1. Open the cover and press the [SET] key.
3.5 Automatic Turning Backlight Off Settings fi-5000N Operator’s Guide 19 Installing the fi-5000N 3 3.5 Automatic Turning Backlight Off Settings You can configure the Message Display’s backlight to be turned off automati cally if no operation is performed for 5 minutes.
20 3.6 Beep Sound Configuration The beep that sounds each time an operation is done, can be set on or off. (The default setting is "Beep".) 1. Open the fi-5000N’s cover and p ress the [SET] key. The following settings screen appears. 2. With the [ L ] key, select "Administrator Setup", and pre ss the [ENT] key.
3.7 Pull Mode User Authentication Settings fi-5000N Operator’s Guide 21 Installing the fi-5000N 3 3.7 Pull Mode User Authentication Settings You can set the user authenticatio n function on o r off, when performing a "Pull" mode scanning. User authentication function is enabled as the default setting.
22 4. With the [ L ] key, select "Pull Mode Authentic.", and press the [ENT ] key. The following screen appears. 5. To perform user authentication, select "A uth enticate"; if authentication is unneces- sary, select "Not authenticate" and then press th e [ENT] key.
3.8 Push Mode Automa tic Logout Time Settings fi-5000N Operator’s Guide 23 Installing the fi-5000N 3 3.8 Push Mode Automatic Logout Time Settings This setting applies only to Push mode scanning. After performing a scanning, if no other opera- tions are done after a certain period of time, the current user will be logged out automatically.
24 3.9 Host Connection Time-out When a login is performed with au thentication by fingerprint or PI N, the fi-5000N waits a certain period of time for a connection response from the host computer. You can specify this waiting time by following the procedure below.
3.10 Displaying Device Information fi-5000N Operator’s Guide 25 Installing the fi-5000N 3 3.10 Displaying Device Information With the procedure below, the following information can be di splayed in .
26 3.11 Initialization of fi-5000N To reset the settings of the fi-5000N to the factory default, follow the procedure below. 1. Turn on the power of the fi-50 00N. 2. Open the cover and press the [SET] key. The following settings screen appears. 3. Press the [ID] and [ .
fi-5000N Operator’s Guide 27 4 Chapter 4 Inst alling and Setting Driver In order to scan documents from the scanner conn ected to fi-5000N, it is necess ary to install the scanner driver and the applica tion software onto the PC.
28 4.1 Installing FUJITSU TWAIN 32 Scanner Driver ■ Preparation Before starting the installation, check the following contents. • Prepare t he Setup CD-ROM . • Uninstall any older versions of FUJITSU TWAIN 32 driver if already installed. ■ Installing 1.
4.1 Installing FUJITSU TWAIN 32 Scanner Driver fi-5000N Operator’s Guide 29 Installing and Setting Driver 4 3. Click [INSTALL PRODUCTS]. 4. Click [TWAIN Driver] on the window below. 5. Select a language used for installation on [Choose Setup Language] window and click [OK].
30 7. When the [InstallShield Wizard Complete] window appe ars, click [Finish]. ⇒ Your PC will be restarted. Do not remove the Setup CD-ROM until your P C has com- pletely restarted. Installation of the scanne r driver is completed. ATTENTION To complete the installation succe ssfully , you must restart your PC.
4.2 Installing ScandAll 21 fi-5000N Operator’s Guide 31 Installing and Setting Driver 4 4.2 Installing ScandAll 21 "ScandAll 21" is an image capturing software that complies with the TWAIN standard. The FUJITSU TWAIN 32 scanner driver enables you to capture images with a FUJITSU image scanner fi-series product.
32 4. Select a language used for installation on [Choose Setup Language] window and click [OK]. 5. Install the application follo wing the instructions on the windo w. 6. When the [InstallShield Wizard Complete] window appears, click [Finish]. ATTENTION For finishing the installation, it may be necessary to restart your PC.
4.3 Installing FUJIT SU ISIS Scanner Driver fi-5000N Operator’s Guide 33 Installing and Setting Driver 4 4.3 Installing FUJITSU ISIS Scanner Driver ■ Preparation Before starting the installatio n, prepare the Setup CD-ROM ■ Installing 1. Turn on the power of the PC, and log on to Windows.
34 3. Click [INSTALL PRODUCTS]. 4. Click [ISIS Driver] on the window below. 5. Select a language used for installation on [Choose Setup Language] window and click [OK].
4.3 Installing FUJIT SU ISIS Scanner Driver fi-5000N Operator’s Guide 35 Installing and Setting Driver 4 7. When the [Setup Complete] window appears, click [Finish] . ⇒ Your PC will be restarted. Do not remove the Setup CD-ROM until your P C has com- pletely restarted.
36 4.4 Configuring Scanning Application Before performing a scanning operation, sel ect the scanner from the scanning application. The following describes how to select the scanner with respect to the FUJITSU TWAIN32 scanner driver and the FUJITSU ISIS scanner driver.
4.4 Configuring Scanning Application fi-5000N Operator’s Guide 37 Installing and Setting Driver 4 ■ For FUJITSU ISIS Scanner Driver This description uses the scanning application " QuickScan Pro ™ " as an example. 1. Start the application.
38 ATTENTION The scanner to be used must be sp ecified as "Favorite" o n "Select Sc an- ner" tab of "fi-5000N Configura tion Tool". Scanner specified as "Favorite " appears in the "Select Source" dialog box.
4.5 Uninstalling the Scanner Driver and Scanning Application fi-5000N Operator’s Guide 39 Installing and Setting Driver 4 4.5 Uninstalling the Scanner Driver and Scanning Application Follow the procedure below to unin stall the s canner driver and sca nning a pplication described in this manual.
40.
5 fi-5000N Operator’s Guide 41 Chapter 5 Inst alling and setting the fi-5000N Sof tware To control a fi-50 00N connected to the network from your PC, and to scan with the scanner con- nected to the .
42 5.1 Installing fi-5000N Software ■ Preparation Before starting the installation, check the following contents. • Prepare t he Setup CD-ROM ■ System Requirements The system requirements for the fi-5000N is as follow.
5.1 Installing fi -5000N Software fi-5000N Operator’s Guide 43 Installing and setting the fi-5000N Software 5 2. Insert the Setup CD-ROM into the CD drive. ⇒ <SETUP DISK START UP SCREEN> appears. 3. Click [INSTALL PRODUCTS]. 4. Click [fi-5000N Software] on the window belo w.
44 5. Select a language used for installation on [Choose Setup Language] window and click [OK]. 6. Follow the instructions on the window to install t he application. 7. When the [InstallShield Wizard Complete] window appe ars, click [Finish]. Installation of the fi-5000N Software is completed.
5.2 fi-5000N Software Overview fi-5000N Operator’s Guide 45 Installing and setting the fi-5000N Software 5 5.2 fi-5000N Software Overview ■ Starting fi-5000N Configuration Tool To start the fi-5000N software, from the [Start] menu, select [All Programs] J [fi-5000N Soft- ware] J [fi-5000N Configuration Tool].
46 [Delete] button Deletes the sele cted fi-5000N from the list. (An fi-5000N cannot be deleted if it is in th e same subnet as your PC.) [User Config.] button Registers/changes/dele tes user information of the selected fi- 5000N. Can be used only by the Operating Administrato r.
5.2 fi-5000N Software Overview fi-5000N Operator’s Guide 47 Installing and setting the fi-5000N Software 5 ■ [Launch Option] Tab The scanning application to be started when the button on the s canner ([Scan] or [Send To]) is pressed, can be configured from this screen.
48 ■ [Advance] Tab When receiving image data, the trigger port number for the fi-5000N, may conflict with other applications. This setting is used to change th e trigger port number on the PC. ■ [Version] Tab This tab shows the version information of the fi-5000N Configuration Tool.
5.3 Adding and Deleting fi-5000N fi-5000N Operator’s Guide 49 Installing and setting the fi-5000N Software 5 5.3 Adding and Deleting fi-5000N When a fi-5000N is in the same subnet as the PC , it is automatically reco gnized and d isplayed in the List View.
50 3. Click the [OK] button. ATTENTION Certain DNS servers and DHCP servers, which do not sup port DNS update, may cause host nam e resolution prob lems when D HCP is specified in IP address settings with fi-5000N.
5.3 Adding and Deleting fi-5000N fi-5000N Operator’s Guide 51 Installing and setting the fi-5000N Software 5 ■ Deleting fi-5000N 1. Select the fi-5000N you want to de lete from the List View of the main screen of fi- 5000N Configuration Tool. 2. Click the [Delete] button.
52 5.4 Managing User Information of fi-5000N You can register, change or delete the information of users on the fi-5000N using the user configu- ration function.
5.4 Managing User Info rmation of fi-5000N fi-5000N Operator’s Guide 53 Installing and setting the fi-5000N Software 5 ⇒ The following screen appears. The following settings can be configured. ■ Registering Users Register a new user onto the fi-5000N with the following procedure.
54 ⇒ The registering process runs . ■ Changing User Information You can change the information of regist ered users with the following procedure. 1.
5.4 Managing User Info rmation of fi-5000N fi-5000N Operator’s Guide 55 Installing and setting the fi-5000N Software 5 ■ Deleting Users You can delete the information of regist ered users with the following procedure. 1. Select (click) the user name you wa nt to delete from the List Vie w.
56 ■ Restoring User Information 1. Click the [Restore] button. 2. Specify the files created at the backup proce dure, and click the [Open] but ton. 3. The screen for password verification appe ars. Enter the password set during backup. 4. Click the [OK] button.
5.5 fi-5000N Administrator Settings fi-5000N Operator’s Guide 57 Installing and setting the fi-5000N Software 5 5.5 fi-5000N Administrator Settings The administrator can confirm o r change the device informat ion of fi-5000N using the administrator configuration function.
58 ⇒ The following screen appears. The following settings can be configured. ■ Changing the fi-5000N unit name The currently selected name of fi -5000N is displayed in "Nam e:" To change, follow the procedure below. 1. Select the "Change fi-5000N configuration" check box.
5.5 fi-5000N Administrator Settings fi-5000N Operator’s Guide 59 Installing and setting the fi-5000N Software 5 ■ Changing the Administrator PIN You can change the PIN of the administrator. To change, follow the procedure below. 1. Select the "Change PIN:" check box.
60 5.6 Managing Scanner Information With the scanner information mana gement function, you can display the information of the scanner connected to an fi-5000N, reset the co nsumables counter, configure the power saving mode, and adjust the offset setting.
5.6 Managing Scanner Information fi-5000N Operator’s Guide 61 Installing and setting the fi-5000N Software 5 ■ [Device Info] Tab The list of the scanner functions is displayed in this screen. The displayed items may differ depending on the scanner.
62 ■ [Device Set] Tab You can display and configure the hardware settings and maintenance information of the scanner. However, there ma y be items that cannot be d isplayed or configure d (appears dimmed ) depending on the scanner. The changed setting is reflected in the scanner after clicking the [OK] button.
5.6 Managing Scanner Information fi-5000N Operator’s Guide 63 Installing and setting the fi-5000N Software 5 Also, messages such as the following ma y appear while using the scanne r. If this message appears, follow the instru ctions below to replace the consumables.
64 About Offset and Scale Adjustment If you click the [Offset] button, the following window appears. You can change the offset amou nt of the start po sition, and the magnification of the sub-scan in this window. [Offset Setting] Fine adjustments can be done if the document position is different from th e actual scanning position.
5.7 Settings of [Launch Option] fi-5000N Operator’s Guide 65 Installing and setting the fi-5000N Software 5 5.7 Settings of [Launch Option] Set the argument specified in the [Launch Option] tab according to the specifications of the appli- cation to be started.
66 Example 1: When the [Scan] button is pressed, "ScandAll 21" starts up, performs the scanning operation and displa ys the scanned image. Example 2: When the [Send to] button is pressed, "ScandAll 21" starts up, performs the scanning operation and saves the scanned images.
5.7 Settings of [Launch Option] fi-5000N Operator’s Guide 67 Installing and setting the fi-5000N Software 5 ATTENTION The following settings are required on Sca ndAll 21. <Start ScandAll 21> 1. From the [Start ] menu, select [All Programs] J [Scanner Utility for Microsoft Windows] J [ScandAll 21], an d start ScandAll 21.
68 5.8 Uninstalling the fi-5000N Software Follow the procedure below to un install the fi-5000N Software. 1. Start up your PC. When using Windo ws 2000 or Windo ws XP, log in as a user with "Administrator" rights. 2. Exit all currently running programs.
6 fi-5000N Operator’s Guide 69 Chapter 6 User Authentication 6.1 Fingerprint Registration ................................. ................................................. 70 6.2 User Authentication by Fingerprint .................................
70 6.1 Fingerprint Registration For user authentication, register each user’s fingerprint information on this product. However, injured users and users with difficulties in register ing fingerprints can be authenticated by using a PIN (personal identification number).
6.1 Fingerprint Registration fi-5000N Operator’s Guide 71 User A uthentication 6 4. Pres s the [ K ] or [ L ] key to sele ct a user from the list of registered users, and pre ss the [ENT] key. The screen to enter the user's PIN (personal identification number) appears.
72 If the PIN matches, the following screen appears. Confirm the correct finger placement by looking at the sticker inside of the cover. For the details, please refer to "APPENDIX Using User Auth entication by Fingerprint." Press [ENT] key, then the follo wing screen appears and the registration of the fingerprint starts.
6.1 Fingerprint Registration fi-5000N Operator’s Guide 73 User A uthentication 6 10.When the 2nd verification process has been completed, the following message appears. Then the message indicating th at the fingerprint data is being saved is displayed.
74 6.2 User Authentication by Fingerprint To change from the logo ut status to the status when the scanner can start scanning (login), finger- print authentication must be done . (Also, PIN authentication is e qui pped as an alternative to an injured users or users with difficu lties in fingerprint authentication.
6.3 User Authentication by PIN fi-5000N Operator’s Guide 75 User A uthentication 6 6.3 User Authentication by PIN PIN authentication is equipped as an alternative to injured users or users w ith difficulties in finger- print authentication.
76 6.4 Changing the User’s PIN The initial user’s PIN value i s set by the Admini strator during the user registration. However the user is ab le to change his/her own PIN.
7 fi-5000N Operator’s Guide 77 Chapter 7 Daily Care This chapter describes how to clean the fi-5000N. Before you clean the fi-5000N, turn of f its power and unplug the AC adapter from the outle t. 7.1 Cleaning Materials..............................
78 7.1 Cleaning Materials *1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth w ith modest quantities of the cleane r. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.
7.2 Parts to Clean and Cleaning Method fi-5000N Operator’s Guide 79 Daily Care 7 7.2 Parts to Clean and Cleaning Method Part to clean Cleaning Meth od Remarks Cover Wipe the Cover with a lint-free dry cloth. Fingerprint Sensor Wipe the Fi ngerprint Se nsor gen- tly with a dry lint-free cloth.
80.
8 fi-5000N Operator’s Guide 81 Chapter 8 T roubleshooting 8.1 Error Messages and Remedies ................................. ...................................... 82 8.2 Troubleshooting ......................... .....................................
82 8.1 Error Messages and Remedies If an error occurs in fi-5000N, a temporary error or device alarm message will appear on the Mes- sage Display. Temporary err ors are errors that can be re solved by the user, while device alarms are malfunctions errors that require recovery work by support en gineers.
8.1 Error Messages and Remedies fi-5000N Operator’s Guide 83 T roub leshooting 8 Position your finger a little lower Check the following: Did you placed yo ur finger in the correct positio n on the sensor? * Refer to "APPENDIX Using User Authentic ation by Fin- gerprint" (p age 1).
84 Host connection failure du e to time-out Check the following: • fi-5000N is connected via network to the PC specified by the logged-in user . • The PC spe cified by the logged-in user is runn ing. • fi-5000N Soft ware is installed on the PC specified by the logged-in use r .
8.1 Error Messages and Remedies fi-5000N Operator’s Guide 85 T roub leshooting 8 For the remedies to solve scanner related tempor ary errors, refer to troubleshooting section on "FUJITSU TWAIN 32 User's Guide" in the Setup CD-ROM included in the scanner.
86 ■ fi-5000N Device Alarms If one of the following message s are shown on fi-5000N Message display, it is likely that fi-5000N has hardware problem. In this case, turn off th e fi-5000N power and turn it on again. If the same device alarm occurs, contact the store where you purchased fi-5000N or an authorized FUJITSU scanner service provider.
8.1 Error Messages and Remedies fi-5000N Operator’s Guide 87 T roub leshooting 8 ■ Scanner Device Alarms If one of the following messages are shown on fi-5 000N Mess age display, it is likely that the scan- ner has hardware problem. In this case, turn off the scanner and fi-5000N power and turn them on again.
88 8.2 Troubleshooting Before you ask for repair serv ice, check the following first. If you cannot solve the problem even after checki ng the following items, contact the store where you purchased the fi-5000N, or co ntact an authorized FUJITSU scanner service provider.
8.2 Troubleshooting fi-5000N Operator’s Guide 89 T roub leshooting 8 Scanning does not start when the [Scan] or [Send to] button is pressed. Is the scanner sh owing an erro r code? (Does "U&quo.
90 8.3 Items to Check Before Asking for Repair Collect the following information before y ou contact the dealer where you bo ught the scanner or an authorized FUJITSU scanner service provider. Item to check Example Remarks Model fi-5000N For details on the model name refer to "8.
8.4 Checking Labels on the fi-5000N fi-5000N Operator’s Guide 91 T roub leshooting 8 8.4 Checking Labels on the fi-5000N The following illustrations are samples of the product labels of the fi-5000N. Label A (Example): Compliance of the device with specifications is shown.
92.
9 fi-5000N Operator’s Guide 93 Chapter 9 S pecifications This chapter lists the fi -5000N specifications. 9.1 Basic Specifications ............................. ..................................................... ...... 94 9.2 Installation Specifications .
94 9.1 Basic Specifications Item Specification Message Display Type Monochrome with backlight (LCD display) Panel size 20 characters × 4 lines Language English, German, French, Italian, Spanish, Japanese Keyboard [ID], [SET], [ESC], [ENT ], [ L ], [ K ], [.
9.2 Installation Specifications fi-5000N Operator’s Guide 95 Specifications 9 9.2 Installation Specifications Item Specifi cation Dimensions Depth Width Height 176 mm (6.
96 9.3 External Dimensions The following shows th e external dimensions of the fi-5000N: (Unit: mm) ( 6 .9 3 in.) (4.9 2 in.) ( 2 .44 in.).
9.4 fi-5000N Softwa re Specifications fi-5000N Operator’s Guide 97 Specifications 9 9.4 fi-5000N Software Specifications Software specifications for th e fi-5000N are listed as below.
98.
fi-5000N Operator’s Guide AP-1 A APPENDIX Using User Authentication by Fingerprint ■ How to place your finger on the sensor Pay attention to the following points when performing fingerpr int registration or authentica- tion.
AP-2 ■ Caution on finger print sensor usage • Discharge static electr icity from your finger by touching a metallic object before placing your finger on the sensor. Static electricity may cause a sensor failure. This proced ure is particularly im portant in dry winter season.
fi-5000N Operator’s Guide AP-3 A ■ Removing Finger Guide For the ease of fingerprint registration by lettin g you place your finger correctly, the Finger Guide is installed on the fi-5000N fingerprin t sensor area. When you get accustomed to placing the finger correctly on the fingerprint sensor, you can remov e the Finger Guide.
AP-4.
fi-5000N Operator’s Guide IN-1 INDEX A AC adapter .... .......................................... 12 AC cable ................................................. 12 Add button ............................................... 45 Adding fi-5000N ........
IN-2 H Host Connection Time-out ...................... 24 I ID key ............ .......................................... 10 Initialization of fi-5000N ........................... 26 Input power ............................................. 95 Installing fi-5000N Software .
fi-5000N Operator’s Guide IN-3 T Trigger port ................................... .......... 48 Turn on the power ................................... 14 U Uninstalling fi-5000NSo ftware ............. .................... 68 the Scanner Driver and Scann ing Application .
z Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law. z The contents of this manual are subject to change without notice.
Een belangrijk punt na aankoop van elk apparaat Fujitsu P3PC-1132-07ENZ0 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Fujitsu P3PC-1132-07ENZ0 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Fujitsu P3PC-1132-07ENZ0 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Fujitsu P3PC-1132-07ENZ0 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Fujitsu P3PC-1132-07ENZ0 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Fujitsu P3PC-1132-07ENZ0 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Fujitsu P3PC-1132-07ENZ0 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Fujitsu P3PC-1132-07ENZ0 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
