Gebruiksaanwijzing /service van het product ScanSnap S500M van de fabrikant Fujitsu
Ga naar pagina of 131
P3PC-1752-01ENZ0 SCAN POWER Color Image Scanner S500M for Macintosh Operator ’ s Guide.
.
ScanSnap S500M Operator's Guide i Introduction Thank you for purchasing the Co lo r Image Scanner ScanSnap S500M. ScanSnap S500M is a feature-rich, office-ready co lor image scanner. It is designed to help y ou improve productivity and solve pro blems in scanning.
ii CONTENTS ■ Regulatory Informatio n .......................... .............................. iv ■ Note, Liability .................. ..................................................... vii ■ Preface .......... ..............................
ScanSnap S500M Operator's Guide iii Chapter 5 Troubleshoo ting .................................................... 79 5.1 Clearing Document Jams.................... ............................. 80 5.2 Troubleshooting Chec klist ................
iv ■ Regulatory Information FCC declaration This equipment has bee n tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interfere nce in a residential installation.
ScanSnap S500M Operator's Guide v Bescheinigung des Herstellers / Importeurs Für den S500M wid folgen des bescheinigt: • In Übereinsstimmung mit den Bestimmu ngen der EN45014(CE) fu nkentstört • Maschinenlärminformationsvero rdnung 3. GPSGV : Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger, gemäß EN ISO 77 79.
vi T rademarks Mac, and Mac OS are trademarks of Apple Comp uter , Inc., registered in the United States and other countries. Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems Incorporated in the United St ates and/or other countries.
ScanSnap S500M Operator's Guide vii ■ Note, Liability READ ALL OF THIS MANUAL CAREFULL Y BEFORE USING THIS PRODUCT . IF THIS PRODUCT IS NOT USED CORRECTL Y , UNEXPECT ED INJUR Y MA Y BE CAUSED TO USERS OR BYST ANDERS.
viii About the W arning Label This product carries the following label warning. HINT This symbol alerts operators to helpful advice regarding operation. Operation This symbol shows o peration with your comp uter . Operation This symbol shows operatio n with your scanner .
ScanSnap S500M Operator's Guide ix Screen Examples In This Manual The screen examples in this manual are subjec t to change without notic e in the interest of product improvement.
x ■ Safety Precautions WARNING The following describes important warn ings described in this manual. Do not touch the AC cable with wet hands. Do not damage the AC cable. Use only specified AC cab les and connector cables Use this scanner only at the indicated power volt age.
ScanSnap S500M Operator's Guide xi Do not use the scanner if you smell strange odor . T urn the scanner OFF if it is damaged. Do not put liquids inside the scanner .
xii CAUTION The following describes important cau tions described in this manual. Do not inst all the sca nner on unstable surfaces. Firmly insert the power plug. Do not block the ventilation port s. Do not place heavy object s or climb on top of the scanner .
ScanSnap S500M Operator's Guide xiii Protect the scanner from st atic electricity . Do not use aerosol sprays near the scanner . A void any cont act when scanner is in use. Disconnect the power plug from the pow er outlet when the scanner is not used for a long period of time.
xiv.
1 ScanSnap S500M Operator's Guide 1 Chapter 1 Before Y ou S t art Using Y our Scanner This chapter describes the necessary preparations for using ScanSnap. 1.1 Names and Functions of Parts .........................................................
2 1.1 Names and Functions of Parts This section describes the name and function of each part. ■ Front Side HINT You can also use the scanner with out the Stacker. Paper chute Open the cover to use the scanner. ⇒ Opening the cover turns on the scanner.
1.1 Names and Func tions of Parts ScanSnap S500M Operator's Guide 3 Bef ore Y ou Star t Using Y our Scanner 1 ■ Operation Button ■ Rear Side SCAN POWER [SCAN] button Press this button to sta rt scanning. [POWER] button Hold down 1 sec. to turn on /off the power supply.
4.
ScanSnap S500M Operator's Guide 5 2 Chapter 2 Connecting ScanSnap This chapter describes how to conn ect ScanSnap to your compute r. Install ScanSnap Manager on your co mput er before connecting the ScanSnap scanner.
6 2.1 Installing ScanSnap "Installation" is the operation to copy the supplied prog ram file or ScanSnap Manager to the hard disk of your computer and create the envi ronment for using ScanSn ap on the computer. ■ Before Installing ScanSnap Manager 1.
2.1 Installing ScanSnap ScanSnap S500M Operator's Guide 7 Connecting ScanSnap 2 ■ Free disk space • ScanSnap Manager 20 MB • Adobe Acrobat 7.0 450 MB 2. Make sure that ScanSnap is not connected to your computer yet. 3. Start up your computer.
8 ■ Installing Adobe Acrobat Install Adobe Acrobat from th e "Adobe Acrobat 7.0 CD-ROM" supplied with the scanner, following the procedures belo w. Prepare the Adobe Acrobat 7.0 CD-ROM. 1. Insert the " Adobe Acrobat 7.0 CD-ROM " into the CD-ROM drive.
2.1 Installing ScanSnap ScanSnap S500M Operator's Guide 9 Connecting ScanSnap 2 2. Click the Finder icon in the Dock menu. ⇒ The Finder window appears. 3. Select the [Applications] folder in the Fin der window. 4. Select and drag and drop the [Adobe Acrob at 7.
10 5. After finishing copying, eject CD-ROM, open the [ Adobe Acrobat 7.0 Standard] folder in the [Applications] folder, double-click the Acrobat Stan dard icon and follow the instructions on-screen. HINT Click the "How to install" button on the "Adobe Acrobat 7.
2.1 Installing ScanSnap ScanSnap S500M Operator's Guide 11 Connecting ScanSnap 2 ■ Installing ScanSnap Manager follow the procedure below to install ScanSnap Manager. Operation 1. Insert the "ScanSnap Setup CD-ROM" into the CD-ROM drive.
12 2) With Mac OS X v10.3 or v10.4 ⇒ The "This Installer package need s to run a program to determine if it can be installed. Do you want to continue?" dialog appears. ⇒ Click the [Continue] button. 3. In the "Welcome to the ScanSn ap Manager Installer" window, click the [Continue] bu t- ton.
2.1 Installing ScanSnap ScanSnap S500M Operator's Guide 13 Connecting ScanSnap 2 ⇒ The "Important Information" window appears. When you have finished reading, click the [Continue] button. ⇒ The "Software License Agreement" window appears .
14 ⇒ The agreement confirmation window appears. To accept the agreement, click the [Agree] bu tton. If you click the [D isagree] button, the installation would be aborted, and the "S oftware License Agreement" window returns. ⇒ If you click the [Agree] button, the "S elect a Destination" window appears.
2.1 Installing ScanSnap ScanSnap S500M Operator's Guide 15 Connecting ScanSnap 2 6. In the ' Easy Install on " <selected destina tion name> " ' window, click the [In stall] button. ⇒ The message "Installing this software requires you to restart your computer when the installation is done.
16 ⇒ The "Startup item regi stration" window appe ars before the installation is complete. ⇒ Clicking the [OK] button in the "Startup it em registration" wind ow closes the window. Even if you do nothing, the window closes automatica lly in 10 seconds.
2.2 Connecting ScanS nap to your Computer ScanSnap S500M Operator's Guide 17 Connecting ScanSnap 2 2.2 Connecting ScanSnap to your Computer Follow the procedure below to conn ect ScanSnap to your computer. 1. Connect ScanSnap to a power outlet with the AC cable.
18 ■ Connecting the USB Cable Connect the U SB cable as shown be low. 1. Remove the seal on the rear side of the ScanSnap scanner. 2. Insert the USB cable into the USB conn ector of ScanSnap and plug the other en d of the cable into the USB port of your computer.
2.2 Connecting ScanS nap to your Computer ScanSnap S500M Operator's Guide 19 Connecting ScanSnap 2 3. Open the paper chute of Scan Snap. ⇒ ScanSnap is automatically turned on and detected by your computer. ATTENTION If the scanner is not autom atically turned on (Blue Po wer lamp is ON), push the [POWER] button on the scanner.
20.
3 ScanSnap S500M Operator's Guide 21 Chapter 3 Basic Scanner Operations This chapter describes the basic operations of ScanSnap. 3.1 Flow of Operations .................................................................................. ...........
22 3.1 Flow of Operations This section describes the flow of operations fr om scanning documents w ith ScanSnap to saving scanned images to PDF files. ■ Preparation Operation 1. Make sure that the AC cable is firmly connected to the scan ner. 2. Make sure that the scanner is correctly connected to your computer.
3.1 Flow of Operations ScanSnap S500M Operator's Guide 23 Basic Scanner Operations 3 ⇒ The scanner is turned on and the status of the "ScanSnap Ma nager" icon will change from to .
24 ■ Scanning documents Operation 1. Make sure that the "ScanSnap Manager " icon is displayed in th e Dock menu. 2. Load the document onto the scanner. Refer to "3.2 Scanning Different Document Ty pes" (page 29) and "3.3 Loading Documents" (page 31).
3.1 Flow of Operations ScanSnap S500M Operator's Guide 25 Basic Scanner Operations 3 ⇒ The Power lamp on the scanner blinks blue during scanning. The following window appear s to indicate the scanning status. ⇒ The selected application (Adobe Acrobat, Prev iew, etc.
26 HINT • Default settings for scan ning are as follows: SCAN button: "Duplex scan" Image quality: "Normal (Fastest)" Color mode : "Auto Color Detection" • Before sca.
3.1 Flow of Operations ScanSnap S500M Operator's Guide 27 Basic Scanner Operations 3 ■ Turning the Scanner ON/OFF ScanSnap can be turned on/off by: • T urning on/o ff the computer , • Opening/closing the p aper chute of the scanner . You do not have to turn on/off the scanner when it is connected to your computer.
28 ■ End of Operation Exiting "ScanSnap Manager" Operation Click and hold the mouse button on the "ScanSn ap Manager" icon in the Dock menu, and select "Quit" from the menu. Disconnecting the scanner Operation 1. Close the paper chute to turn off the scan ner.
3.2 Scanning Different Document Types ScanSnap S500M Operator's Guide 29 Basic Scanner Operations 3 3.2 Scanning Different Document Types The table below shows the types of docume nts that you can sca n with ScanSnap.
30 ATTENTION • T o prevent the rollers from becoming dirty , avoid scanning documents written in pencil. If you scan such document s, clean the rollers as frequently as possible. For details, refer to "6.2 Cle anin g the Scann er Exterior & St acker" (page 89) .
3.3 Loading Documents ScanSnap S500M Operator's Guide 31 Basic Scanner Operations 3 3.3 Loading Documents This section describes how to lo ad documents onto the scanner.
32 3) Hold the batch firmly with both hands so that the both edges remain beveled, and then unbend the batch as shown in the figure below. 4) Repeat steps 1) to 3) a few times. 5) Turn the batch 90 degrees to hold th e other two sides of it, and then perform steps 1 to 4 again.
3.3 Loading Documents ScanSnap S500M Operator's Guide 33 Basic Scanner Operations 3 3. Adjust the side guides to the document width. Move the side guides so that they are touchi ng the document ed ge. If there is clearance between the document edge and the guid e, the scanned imag es may be skewed.
34 3.4 Changing Scan Settings All the settings on ScanSnap are co nfigured with "ScanS nap Manager." The ScanSnap icon is added to the Dock menu at the middle- bottom of the Mac OS X screen. The following menu appears when you press and hold the mouse button on the icon.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 35 Basic Scanner Operations 3 The following describes how to change the settings. Operation 1. Click and hold down the mouse button o n t he ScanSnap icon in the Dock menu, and select "Settings" from the menu.
36 [Application] tab ■ Application: Specify the application to interact wit h S canSnap. The specified applica tion starts run- ning after the docu ment is scanned with S canSnap.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 37 Basic Scanner Operations 3 ■ [Add or Remove] button Applications can be added to and removed from the "Appl ication" list. When you click the [Add o r Remove] bu tton, the following screen is displayed.
38 <To remove an application> 1) Select the application you want to remo v e in the "Add or remove application" window, and then click the [Remove] bu tton. ⇒ The confirmation window app ears. 2) Click the [Yes] button. ⇒ The "Add or remove application" window appears; confirm that the application has been remove d.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 39 Basic Scanner Operations 3 [Save] tab ■ Folder path to save images: Specify the folder to save the scanned images. When you click the [Browse] bu tton, the "Browse for Folder" window is displayed.
40 ■ [Filename format] button Set the filename format used fo r files to save the scanned images. When you click the [File name format] button, the following window appears. One of three settings can be specified. • "Use Operating System Setting.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 41 Basic Scanner Operations 3 [Scanning] tab ■ Image quality: Specify whether to scan document s quickly or at higher quality. Select one of the following modes: • Normal (Fastest) Select this mode when you wish to scan documents quickly.
42 ■ Color mode: Specify whether to scan docu ments in color mode or in black-and-white mod e. By clicking , you can select one of the following modes: • Auto Color Detection (Automatically recogn.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 43 Basic Scanner Operations 3 ■ [Option] button Configure other scanning-related settings. Clicking the [Option] button di splays the following window. • Brightness (Black and White scanning only) Sets the color density for sca nning black-and-white images.
44 • Correct skewed character strings automatically. If this checkbox is marked, ScanSnap dete cts a skew of the documents and outputs corrected images.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 45 Basic Scanner Operations 3 [File option] tab ■ Selecting the file option Specify the file format of the scanned image. Click to select the file format. You can select either of the following file formats: • PDF (*.
46 • "Multipage PDF (whole batch in one PDF )" Create a merged PDF file of all the scanned images. • "Generate one PDF file per x page(s)" Create PDF files, each of which includes the specified number o f pages, per scan.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 47 Basic Scanner Operations 3 [Paper size] tab ■ Paper size: Specify the paper size of the do cu ment to be loaded on the sca nner. Click to select the size. The following paper sizes (Width x Length) can be selected.
48 ■ [Custom] button With this function, you can add up to ten cu stom document sizes into the [Paper size] list. Clicking this button displays the following window. <When adding a custom document size> 1) Click the [Add] bu tton. ⇒ The following window appears.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 49 Basic Scanner Operations 3 <When deleting a custom document size> 1) In the "Add or Remove Custom sizes" window, select the document size you want to delete and click the [Remove] button.
50 [Compression] tab ■ Compression rate: Change the compression rate and adjust the file size of the scanned image. The compression rate is ch anged by moving the slider. The higher the compression rate is , the smaller the file size is. ATTENTION As the compression rat e increases, the qu ality of scanned images decreases.
3.4 Changing Scan Settings ScanSnap S500M Operator's Guide 51 Basic Scanner Operations 3 HINT Image data size The following table shows rough estimates of sizes of generated images when a single-sided color documen t is scanned in respective modes.
52 3.5 Various settings according to your needs When you use default settings on ScanSnap, all you have to do is simply press the [SCAN] button to scan the documents, save im ages in the best condition, an d display the scanned images on the screen; any complicated op erations are not required.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 53 Basic Scanner Operations 3 ■ Scanning only one side of a document Pressing the [SCAN] button on ScanSnap st arts scanning documents in "Duplex scan" mode by default.
54 4. Load the document onto the scanner. 5. Press the [SCAN] button . ⇒ The document is scanned in "Simplex scan" mode. HINT To select the "Duplex scan" mode again, go to step 2 and se lect "Duplex Scan (double-sided)" instead.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 55 Basic Scanner Operations 3 ■ Scanning color docume nt in black-and-white By default, ScanSnap automatically recognizes whether a document is black-and-white or color.
56 ■ Skipping blank pages ScanSnap is able to remo ve bl ank pages automatically. When do cuments in which doub le-sided and single-sided pages are mixed are scanned in "Duplex scan" mode , the backside of single-sided (blank) pages are automatically re moved, and the image data of only necessary pages is generated.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 57 Basic Scanner Operations 3 3. Mark the [Allow automatic blank page remo val] checkbox. 4. Click the [OK] button and close all the windows. ⇒ The setting takes effect the next time you scan documents.
58 ■ Correcting skewed documents ScanSnap is able to automatically correct do cument skew. To change the setting, follow the procedure below. Operation 1. Click and hold the mouse button on the Sca nSnap icon , and select "Settings" from the displayed menu.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 59 Basic Scanner Operations 3 3. Mark the [Correct skewed characte r strings automatically] checkbox. 4. Click the [OK] button and close all the windows. ⇒ The setting takes effect the ne xt time you scan documents.
60 ■ Correcting the orientat ion of scanned image When there are page s of different orientation s in a scanned document, ScanSnap is able to automatically rotate the orienta tion (view direction) of the scan ned images. For example, it often happens that some pages are portrait (text) and some are landscape (tables) in a document.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 61 Basic Scanner Operations 3 3. Mark the [Allow automatic image rotation] checkbo x. 4. Click the [OK] button and close all the windows. ⇒ The setting takes effect the ne xt time you scan documents.
62 ■ Scanning documents of differen t widths or sizes at a time By marking the "Scan mixed paper size" checkbox, you can scan documents of different widths or sizes in one batch. To scan documents of various sizes, do the following. Operation 1.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 63 Basic Scanner Operations 3 4. Click the [OK] button and close all the windows.
64 6. Load the documents onto the paper chu te. ATTENTION • Place all documents cente ring them under the pick roller . (Document s that are not under the pick roller cannot be fed.) • Adjust the side guide to the widest document. • Carefully load the smaller d ocuments, which cannot cont act the side guide, so that they can be fed straight.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 65 Basic Scanner Operations 3 7. Press the [SCAN] button . ⇒ The size of all images output conf orms to the respective documents. ATTENTION If the document was skewed during sca nning, the output image size may be different from the original document size.
66 ■ Rotating the page view of a PDF file Even after scanning a document and saving it as a PDF file, you can change the view direction of this PDF file with Adobe Acrobat. When you want chan ge the orientation of any other pag es, follow the procedure below.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 67 Basic Scanner Operations 3 3. You see the view direction is changed.
68 ■ Saving scanned images in multiple files ScanSnap can save scanned images to multiple PDF files, each of which contains a preset number of pages. For example, you can scan a batch of filled forms and create a sepa rate file for each. To change the setting, follow the procedure below.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 69 Basic Scanner Operations 3 3. In the "PDF file format option" window, select "Genera te one PDF file per x Page" and a number. Every PDF file created contains the specified number of pages.
70 ■ Continuing/stopping scan ning after an error If an error such as the paper jam occurs while you scan a document containin g more than one pages, you will see the following message. You can continue or stop scanning using the following procedure.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 71 Basic Scanner Operations 3 ATTENTION The [Cont inue Scannin g] button m ay be grayed out as shown in the example below. If this is the case, it is not possible to continue scanning.
72 ■ Converting scanned images to searchable text with OCR If you scan a text document, you wil l get an image of the document containing all the signs, letters, and numbers.
3.5 Various settings according to your needs ScanSnap S500M Operator's Guide 73 Basic Scanner Operations 3 ⇒ The text information is added to the image data by the "Recognize Text" function. ATTENTION An error may occur when data scanned at 600d pi or more is converted with Adobe Acrobat 7.
74.
ScanSnap S500M Operator's Guide 75 4 Chapter 4 Uninst alling ScanSnap The "Uninstallation" process removes the ScanSnap pro gram files, which are installed on your computer, from the hard disk and restores the system environment to its original state.
76 4.1 Uninstalling Supplied Programs Follow the procedure below to uninstall ScanSnap Manager. ■ To uninstall ScanSnap Ma nager in Mac OS X v10.2 1. Start your computer. 2. Quit ScanSnap applications; all users must quit those running applica tions.
4.1 Uninstalling Supplied Programs ScanSnap S500M Operator's Guide 77 Uninstalling ScanSnap 4 ■ To uninstall ScanSnap Manage r in Mac OS X v10.3/v10.4 1. Start your computer. 2. Quit ScanSnap Manager; all user s must quit those running applications.
78.
5 ScanSnap S500M Operator's Guide 79 Chapter 5 T roubleshooting This chapter describes ho w to remove jammed docume nts and troubleshoot other pro blems. 5.1 Clearing Document Jams .................................................. ..............
80 5.1 Clearing Document Jams Cautions in clearing a paper jam are as follows: CAUTION • Do not pull out the jammed paper by force; be su re to open the ADF before removing the jammed documen t. • Do not touch sharp obje cts inside the scanner when removing jammed paper or you might be injured.
5.1 Clearing Document Jams ScanSnap S500M Operator's Guide 81 T roubleshooting 5 3. Remove the jammed paper. 4. Close the ADF. ⇒ You should hear the ADF click when it returns to its or iginal position. ATTENTION Make sure that the ADF is firmly closed.
82 5.2 Troubleshooting Checklist This section describes common pro blems that may occur during the use of ScanSnap and how to solve them. Check the items as described in the following table before requesting repair service.
5.2 Troubleshooting Checklist ScanSnap S500M Operator's Guide 83 T roubleshooting 5 Scanning does not start. Is the USB cable connected correctl y? Connect the USB cable cor rectly. (When a hub is used, check the hub’s power supply.) Is the LED light blinking? Disco nnect and then re-connect the AC cable and AC adapter.
84 Thin lines are faint on the document. (Example: T he ruled lines of the table are invisible.) Are you scanning docu - ments including typed text, tables with ruled lines, or handwritten text in color mode? The color m ode is used for capturing color images such as the photo in high quality.
5.2 Troubleshooting Checklist ScanSnap S500M Operator's Guide 85 T roubleshooting 5 Sheets of paper a re not fed (stops midway). Is the Pick roller dirty? Clean the Pick roller following the instructions in section "6.3 Cleanin g the I nside of the Scanner" (page 90 ).
86 The orientation of scanned images is not displayed correctly (when "Allow auto- matic image rotation" is enable.) Depending on the contents of the document, the automatic image rotation may not work properly.
6 ScanSnap S500M Operator's Guide 87 Chapter 6 Daily Care This chapter describes how to clean ScanSnap. WARNING Fire/Electric Shock Before you clean the scanner , turn off the scanner and disconnect the AC adapte r from the power outlet. 6.1 Cleaning Materials .
88 6.1 Cleaning Materials *1) To purchase cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner. *2) Any lint-free cloth can be used. Cleaning Materials Pa rts No. Remarks Cleaner F1 CA99501-0013 1 bottle (100ml) Moisten a cloth with this fluid and wipe the scanner clean.
6.2 Cleaning the Scanner Exterior & Stacker ScanSnap S500M Operator's Guide 89 Daily Care 6 6.2 Cleaning the Scanner Exterior & Stacker Clean the scanner exterior and the stacker with a cloth moistened with a small amount of Clean er F1 (isopropyl alcoho l) or any neutral detergent.
90 6.3 Cleaning the Inside of the Scanner Clean the inside of the scanner with a cloth moistened with Cleaner F1. After the scanner has been in use for a period of time, its insi de will be contaminated with paper debris and dust. The accumulation of debr is and dust may cause scanning problems.
6.3 Cleaning the Insi de of the Scanner ScanSnap S500M Operator's Guide 91 Daily Care 6 2. Clean the following locations with a cloth moistene d with cleaner F1. Turn off the scanner before clea ning the following locations. • Pad ASSY (x 1) Remove the dirt on the rubber tabs by wi ping downward.
92 Turn on the scanner before cleaning the following locatio ns, an d rotate the ro llers to clean them thoroughly. • Feed rollers (x 2) Clean lightly taking care not to scratch the su rface of the rollers. Take particular care in cleaning the feed rollers since black debris on the rollers adversely affect the feed performance.
6.3 Cleaning the Insi de of the Scanner ScanSnap S500M Operator's Guide 93 Daily Care 6 3. Close the ADF. ⇒ You should hear the ADF click when it returns to its original position. ATTENTION When closing the ADF, make sure tha t it is completely closed.
94.
7 ScanSnap S500M Operator's Guide 95 Chapter 7 Replacing Consumables This chapter describes how to replace consumables. WARNING Fire/Electric Shock Before you replace the consumables, turn o ff the scanner and disconnect the AC adapter from the power outlet.
96 7.1 Replacing Consumables This section describes how to replace consumables. ■ Part Nos. and Replacemen t Cycles of Consumables The following tables list the part numbers of consumables a nd their suggested replacement cycles. The suggested replacement cycles are based on A4 /Letter sized paper free of wood fibers 80 g/m 2 (2 1 lb).
7.1 Replacing Consumables ScanSnap S500M Operator's Guide 97 Replacing Consumab les 7 HINT Use the following procedure to check the target valu es for replacement and usage information of consumables. 1. Click and hold the "ScanSnap Manage r" icon in the Dock menu.
98 7.2 Replacing the Pad ASSY Replace the Pad ASSY following the procedure below. 1. Remove the document s on the paper chute. 2. Pull the cover open lever to open the ADF. 3. Remove the Pad ASSY. Pinch both ends o f the Pad ASSY and pull it out as shown below.
7.2 Replacing the Pad ASSY ScanSnap S500M Operator's Guide 99 Replacing Consumab les 7 4. Attach the new Pad ASSY. 5. Close the ADF. ⇒ You should hear the ADF click when it returns to its original position. 6. Turn on the scanner. ATTENTION Make sure that the Pad ASSY is firmly at tached.
100 7. Click and hold the "ScanSnap Manager" ic on o n the Dock menu, and select [Check consumable supplies...] fr om the menu. ⇒ The "Check consumable status" window will appear. 8. In the "Check consumable st atus" window, click the [Reset] button of the "Pad ASSY Count.
7.3 Replacing the Pick Roller ScanSnap S500M Operator's Guide 101 Replacing Consumab les 7 7.3 Replacing the Pick Roller Replace the Pick roller following the procedure below. 1. Remove the document s on the paper chute. 2. Open the ADF while pulling the cover open le ver.
102 4. Remove the sheet guide. Pinch the handle and claw togeth er on bo th sides of the sheet guide to remove it. 5. Rotate the Pick roller bushing (on the left side).
7.3 Replacing the Pick Roller ScanSnap S500M Operator's Guide 103 Replacing Consumab les 7 6. Remove the Pick roller with its shaft . Slightly pull up the left part of the Pick ro ller shaft (abo ut 5mm), mo ve it towards the left side, and then raise it to remove from the scanner.
104 8. Attach a new Pick roller to the Pick roller sh aft. Aligning the key with the slot on the Pick roller, insert the Pick roller shaft into the pick roller. 9. Install the Pick roller with its shaft to the scanne r. Insert the right end of the shaft to the roller bush ing (right), and set the shaft to the slot while lowering it.
7.3 Replacing the Pick Roller ScanSnap S500M Operator's Guide 105 Replacing Consumab les 7 10. Rotate the roller bushing (on the left) by rotating it as shown below. 11. Attach the sheet guide to the scanner. Pinch the handles on bo th sides of the sheet guide and attach it to the scanner.
106 12. Close the ADF. ⇒ You should hear the ADF click when it returns to its or iginal position. 13. Turn on the scanner. 14. Click and hold the "ScanSnap Manager" icon on the Dock m enu , and select [Check consumable supplies] from the men u.
7.3 Replacing the Pick Roller ScanSnap S500M Operator's Guide 107 Replacing Consumab les 7 ⇒ A confirmation pop-up screen appears. ⇒ When you click the [Yes] button, the counter is reset to "0.
108.
A ScanSnap S500M Operator's Guide 109 Appendix A Installation Specifications The following table summarizes the inst allation specifications of ScanSnap. Note) Dimensions Item Specification s Dimensions (Note) Width Depth Height Minimum 284 mm 11.
110.
ScanSnap S500M Operator's Guide 111 Index A AC adapter connector ............................... 3 ADF ..... ...................................................... 2 Allow automatic blank page removal ...... 43 Allow automatic image deskew ......
112 M Media .................................. .................... 29 Menu ................................... .................... 34 N Normal quality ..................... .................... 41 O Operation Button .................................
ScanSnap S500M O perator's Guide 113 Contact the store where you purchased your ScanSn ap or an authorized se rvice provider for per- forming repairs on this prod uct.
114.
z The contents of this manual are subject to change without notice. z PFU LIMITED assumes no liability for incidental or consequential damages arising from th e use of this manual, and any claims by a third party.
Een belangrijk punt na aankoop van elk apparaat Fujitsu ScanSnap S500M (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Fujitsu ScanSnap S500M heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Fujitsu ScanSnap S500M vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Fujitsu ScanSnap S500M leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Fujitsu ScanSnap S500M krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Fujitsu ScanSnap S500M bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Fujitsu ScanSnap S500M kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Fujitsu ScanSnap S500M . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
