Gebruiksaanwijzing /service van het product EMP-X3 van de fabrikant Garmin
Ga naar pagina of 85
User’s Guide.
Projection Procedure This e xplain s the ba sic oper ations f or prepa ring the pro j ector b efor e use a nd f or star ting pr ojecti on. Setup ............................................................. .......... i • Using the r e mote contr ol.
i English * Distance from the center of the lens to the base of the screen. W : Maximum Zoom T : Minimum Zoom Setup Based on the projection distance, choose the best position for your pr ojected image.
ii English Audio adapter (Commercially available) T o audio output port T o audio output port Component out Video out S-Video out S-Video cable (Commercially available) A/V cable (Commercially availab.
iii English Enlarge Reduce Normal Wide T op Wide Base Extend Retract Rear Adjustable Foot * If you turn the power on straight after turning it off, the time before projection starts becomes longer than usual. * For video equipment, press " play " to start playback.
1 Notations Used in This Guide When "unit" or "proj ector" appears in the te xt of this User’ s Guide , it may refer t o items which are accesso ries or optional equ ipment in additio n to the mai n projector unit it self. Indicates procedures w hich may result in damage or injury if suff icien t care is not taken.
2 Contents Projection Procedure Setup ..................... ........................ .................................... ...... i Using the remote contr ol ......... ...................................... ............... i Connecting to Visual E quipment .
3 Contents Appendices Installation ............. ........................ .................................... ... 56 Setting Up the Projector ................................................ ............ 56 Maintenance .......... ....................
4 Pr ojector Features Y ou can enjoy images of "Photos", "Presentations", "Games", and so on, i n the optimum colour tone by choosing the most suit able mode for your surroundings. s p.15 The direct po wer on function means you can turn the projector on simply by plugging the po wer cable into the electrical outlet.
5 Projector Features Manage us ers with p assw ord pr otect Y ou can set up a password to restrict the use of the projector . s p.26 Opera tion loc k stops the us e of all co ntrol pane l buttons e xc.
6 P ar t Names and Functions Fr ont/T op • Control panel s p.7 • Remote control light-receiving area s p.i Receives signals f rom the remote control. • Front adjustable foot s p.iii Extend an d retract to adjust the proj ection angle whe n the projec tor is placed on a surf ace such as a shelf.
7 Part Names and Functions Control P anel • [P ower] b utton s p.iii Turns the proj ector power on or off. • [Help] button s p.42 Displays and cl oses the help, whi ch shows solutions if a problem occurs. • [Menu] button s p.32 Displays a nd closes the config uration menu.
8 Part Names and Functions Rear (EMP-X3) • Remote control light-receiving area s p.i Receives sign als from the remote c ontrol. • Power inlet s p.iii Connects to t he power cable. • Computer port s p.i Inputs analogue RGB vide o signals from a computer a nd RGB video si gnals and component vide o g signals from other vide o sources.
9 Part Names and Functions Rear (E MP-82/ 62) • Remote control light-receiving area s p.i Receive s signal s from the remote control. • Power inlet s p.iii Connects to t he power cable. • Computer2 port s p. ii Inputs analo gue RGB video signals from a computer a nd RGB video signals and component video g signals from othe r video sources.
10 Part Names and Functions Base • Air filter (air intake vent ) s p.57 , p.63 This prevents dust and other foreign part icles from getti ng inside the proj ector when air i s drawn in. It shoul d be clean ed and replace d periodica lly. • Suspension bracket fix ing points (3 point s) s p.
11 Part Names and Functions Remote Control The following e xplain s the fu nctio ns shown in th e illust ration o f the E MP-82 /62 rem ote con trol. If you position th e o ver the b utton icon or b utton name, a description of that b utton will appe ar .
Adjusting and changing the image This chapte r e xplains ho w to adjust the qu ality of the imag e, the v olume, the colo ur mode selectio n and so on, and also ho w to ch ange the imag e. Adjusting th e Image Quality .. ............................ 13 • Adjusting Com puter Images and RGB V ideo Images .
13 Adjusting the Ima g e Quality Adjus ting Co mput er Ima g es and RGB Vi deo Images Automatic setup detects analogue RGB signals coming from a connected computer , and automatic ally adjusts t hese signals so that the optimum images can be obtained.
14 Adjusting the I mage Quality B Adjust the trac king until the vertical stripes disappea r from the imag e. The tracking value increases or decreases each time a button is pressed.
15 Adjusting the I mage Quality B Adjust the synchronization until the horizontal nois e disappears from the ima ge . The sync value increases or decreases each time a button is pressed.
16 Adjusting the I mage Quality PROCEDURE Each time you press the button, the colour modes change in the following order . The current setting appears in the top-right corner of the scre en each time the colour mode is changed .
17 Adjusting the V olume The v olume of th e projector's b uilt-in speaker can be ad justed as follo ws. PROCEDURE When the button is pressed to the [ ] side, the volume increases, and when it is pressed to the [ ] side, the v ol ume decreases. The volume gauge appears on the screen when the volume is being adjusted.
18 Changing the Pr ojected Image (Sour ce Sear ch) A ut omatic ally Detect In coming Si gnals and Chang e the Pr ojecte d Ima ge (Sour ce Sear ch) The picture signal input from the connected equipment is automatically detected and projected. PROCEDURE A P erform the Source Searc h .
Useful Functions This chapt er e xplains use ful funct ions f or giving pre sentatio ns and so on, and t he security functions . Functions for Enhancing Pr ojection ................. 20 • Pausing the Image a nd Sound (A/V Mute) ... .................
20 Functions f or Enhancing Pr ojection P au sing the Im age and Sou nd (A/V Mu te) For e x ample, this can be used if you want to pause the projection for a moment and focus the audience’ s attention on what you are saying. Or if you are making a computer presenta tion and you do not want to sho w details, such as selecting dif fe rent f iles.
21 Functions for Enhancing Projection Changing the Aspect Ratio (Resizing) This function changes the aspect ratio g of images from 4:3 to 16:9 when component video g , S-V ideo g , or composite video g images are being projected. Images which hav e been recorded in digital video or onto D VDs ca n be vie wed in 16:9 wide-screen format.
22 Functions for Enhancing Projection B Move the pointer icon. Enlar ging P ar t of the Image (E-Zoom) This is useful when you want to see images in greater detail, such as graphs and details in a table.
23 Functions for Enhancing Projection B Move the cr oss to the area of the image that is to be enlarged or reduced. C Enlarge . Y o u can reduce the enlarged image by pressing the [-] button.
24 Functions for Enhancing Projection Once the connection has been made, the mouse pointer c an be operated as follo ws. • The USB cable c an only be connected to computers with a standard USB interface.
25 Functions for Enhancing Projection • If the mouse button settings are set to rev erse on the computer , the operation of the remote control b uttons will also be revers e d. • The wireless mouse function cannot be used while the follo wing functions are being used.
26 Security functions Pre venting th eft (P ass wor d Pr otec t) When the P assword Protect function is acti v ated, people who do not kno w the password will not be able to use the projector to project im ages, if the po w er has been disconnected since the password was last entered corre ctly .
27 Security functions When "P ass word Tim er" is set to "On" and "Timer " is use d The password entry screen will not be displayed at all when the po wer is turned on until the l ength of time that has be en set has e lapsed.
28 Security functions C T urn "P as s wor d Timer" o n. If you don't use this se tting, proceed to step 4. (1) Select "P assword T imer", and then pres s the [Enter] button. (2) Select "On", and then press the [Enter] button.
29 Security functions Operat ion Button Lock Function This function locks the butt ons on the pr ojector's control panel. This function is useful at times such as during sho w ev ents so that only projection is carried out deacti va ting all b uttons operation, or in places such as schools to limit the range of b uttons that can be operated.
30 Security functions C When the confirmation message is dis pla yed, select "Y es". The control panel buttons will be locked in accordance with the selected setting.
Configuration Menu This chapt er ex plains how to use the confi gur ation m enu and its f unctions. Using the C onfiguratio n Menu........................... 32 List of Funct ions .......................................... ....... 33 • "Image" Menu .
32 Using the Configuration Men u A Selecting from the top menu C Changing the selected item B Selecting from the sub menu Top menu Sub menu (Settings) guide Using the remote c ontrol Using t he con trol pane l Select th e setting to change .
33 List of Functions "Image" Menu The items that can be set will v ary depending on the input source that is currently being projected. Setting details are sav ed separately for each source. Sub-menu Funct ion Color Mode Select the quality of the image to suit your surroundings.
34 List of Functions "Signal" Menu The items that can be set will v ary depending on the input source that is currently being projected. Setting details are sav ed separately for eac h source.
35 List of Functions V ideo Signal (Adjustment is only pos sible when composite video/S-V ideo signal s are being input.) Sets the video signal format.
36 List of Functions "Setting s" Men u Sub-menu Function K eystone C orrects vertical k eystone distorti on in images. s p.i Aut o K eystone (EMP-82/62 only) Sets the function for automatically detecting the projector angle and correcting keystone "On" or "Of f" when the projector is t ilted v erticall y .
37 List of Functions "Exten ded" Menu Sub-menu Function Dis pla y This lets you make settings related to the projector's display . Message : Sets whether the input sourc e name or colou.
38 List of Functions Oper ation Direct P o wer On: Sets whether direct power on is enabled ("On") or disabled ("Off"). When you set to "On" a nd leav e the power cable co.
39 List of Functions "Info" Men u Lets you check the status of the image signals being projected and the status of the projector . (Display only) Sub-menu Function Lamp Hours Sho ws the cumulati ve la mp operating time . If it reaches the lamp warning time, the characters ar e displayed in yello w .
40 List of Functions "Reset " Menu Sub-menu Function Reset All Resets all items in all menus to their de faul t settings. The "Computer Input" , "Computer1 Input", "Comput er2 Input", "User’ s Logo", "Lamp Hours" an d "Language" settings will not be res et to their defaults.
Troubleshooting This cha pter describes ho w to identify p rob lems and wha t to d o if a p rob lem is f ound. Using the Help ......................... ............................ 42 Pr oblems Solvi ng.................... ............................
42 Using the Help If a problem occurs with the projector, th e Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. PROCEDURE A Display the Help menu. B Select a menu item.
43 Using the Help D Repeat the operations in steps 2 and 3 to pr oceed through the menu to more detailed items. E Press the [Help] button to exit the help menu. If the Help function does not pro vide a solution to the problem, refer to "Problem Solving" s p.
44 Pr oblems Solving If you are having a problem with the projector , first check the projector's indicators and refer to "Reading the Indicators" be low . If the indicators do not sho w clearly what the problem might be, refer to "When the Indic ators Pro vide No Help".
45 Problems Solvin g High temp erature error (ov er heating) The lamp will turn of f automatically and projection will stop. W ait for about 5 minutes. After about 5 minutes the projector will switch to standby mode, so check the follo wing two points.
46 Problems Solvin g Lamp or T emp indicator flashes o range : lit : flashing : off Status Cause Remed y or St atus High temperature warning (This is not an abnormality , but if the temperature rises too high again, projection will st op automatical ly .
47 Problems Solvin g When the Indica tors Pr ovide No Help If any of the follo wing problems occ ur and the indicators do not of fer a solution, refer to the pages giv en for each problem. No image s appear s p. 4 8 Projection does not start, the projection area is completely black, the projection area is completely blue, and so on.
48 Problems Solvin g No ima ges ap pear Projecti on stops automatically Prob le ms relating to images Check Remed y W as the [P ower] b utton pressed? Press the [Po w er] b utton to turn the po wer on. Are the indicator s switc hed off? The power cable is not connected correctly or po we r is not being supplied normally .
49 Problems Solvin g The me ssage "Not S uppor ted." is d i spla ye d The messa ge "N o Signal ." is dis play ed Check Remed y Are the image signal f ormat sett ings correct? If a composite video g or S-V ideo g source is connected to the projector , use the "V i deo Signal" menu command to sele ct the s ignal format.
50 Problems Solvin g Images are fuzzy or ou t of fo cus Inter f e renc e or distor t ion ap pear in images Check Remed y Has the f ocus been adjusted correct l y? T urn the focus ring on the projector to adjust the focus. Is the lens cov e r still attach ed? Remo ve the lens co ver .
51 Problems Solvin g Imag e is tr uncat ed (larg e) or sm all Check Remed y Has the " As pect rat io g " been set correctl y? Press the [Resize] b utton on the remote con t rol. s p .21 Is the ima ge still being enlar ged b y the E-Zoom function? Press the [Esc] butt on on the remote control to cancel the E-Zoom function.
52 Problems Solvin g Image colour s are no t right Image s appear da rk Check Remed y Do the input signal settings match the signals from t he connected device? If a composite video g or S-V ideo g source is connected to the projector , use the "V i deo Signal" menu command to select the video signal format.
53 Problems Solvin g Nothin g appears on t he e xternal monitor P o wer does not turn on No sou nd can be heard or the so und is f aint Check Remed y Are images from a port other than the Computer por t being pr oject ed? (EMP-X3 only) The only images that can be displayed on an external monitor are those from the Computer port.
54 Problems Solvin g The re mote cont rol does not work Check Remed y Is the remote contr ol light-emitting area facing to wards the remote contr ol light- receiving ar ea when it is operated? Fa ce the remot e control to wards the remo te control light-re cei ving area.
Appendices This cha pter pro vides in formation on maint enance pr ocedu res to e nsure the best le v el of perf ormance from the proje ctor . Installation .......... .......................................... ....... 56 • Setting Up the Projector .
56 Installation Sett ing Up the Pr oje ctor The projector supports the follo wing four dif f erent projection methods, allo w ing you to choose the best method for displaying your images. • F or ceiling mount installation (su spending from the ceiling), a special installation procedure is required.
57 Maintenance This section describes maintenance tasks such a s cleaning the projector and replacing consumable parts. Clea ning Y ou should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Clean the projector's surface by wiping it gently with a soft cloth.
58 Maintenance Replacing Consumables This section explains ho w to repla ce the remote control batter ies, the lamp, and the air f ilters. If delays in the responsiv eness of the remote control occur or if it does not operate after it ha s been used for some time , it probably means tha t the batteries are becoming flat.
59 Maintenance It is time to replac e the lamp when: • The messa ge "Rep lace the Lamp ." app ears on the scr een wh en proj ectio n star ts . • When th e Lamp indica tor is fl ashing ora nge • The pro jected i mage g ets dark er or star ts to deteri orate Lamp Replacement Period A mess age will be displ ayed.
60 Maintenance PROCEDURE A After you turn off the pr ojector ’ s po wer , and the confirmation buzzer beeps twic e, disc onnect the power cable. B W ait until the lamp has cooled down, then remo ve the lamp cover fr o m the base of the pr ojector .
61 Maintenance E Install the new lamp. Insert the new lamp so that the lamp fits in place correctly and once it is fully inserted, tigh ten the two scre ws. F Install the lamp cover . Slide the lamp cover and tighten the co ver f ixing scre ws. • Install the lamp securely .
62 Maintenance The projector has a bui lt-in counter which keeps track of the lamp operatin g time. When the cumulati ve opera ting time re aches a ce rtain point, it causes the replacement warning message to be displayed. Therefore, the counte r needs to be reset after the lamp has been replace d with a ne w one.
63 Maintenance If the air f ilters are brok en or if the warning messa ge reappear s after the y ha ve been cleaned, they should be replaced. The air filter can be replaced ev en if the projector is instal led on a ceiling.
64 Sa ving a User's Logo Y ou can record the image that is currently being projected as a user's logo. PROCEDURE A Project the image y ou would like to use as the user ’ s logo, and then display the configuration menu. B Select "Extended" from the configuration menu, and then select "User ’ s Logo".
65 Saving a User's Logo C When "Choose this image as the Use r's Logo?" appears, select "Y es". D The image to be rec orded and a selection marquee bo x will be displayed. Mo ve the marquee bo x to se lect the par t of the image to use .
66 Connecting to External Output Equipment Connec ting to an Exte rnal Monitor Analogue RGB images and RGB video images from a computer that are being input to the Computer/Computer1 port can be vie w.
67 Optional Accessories and Consumab les The following opti ona l accessories are av ailable f or purchase if required. This list of optional accessorie s is current as of M arch, 2006. Details of accessories are subject to change without notice. V aries depending on country of purchase.
68 Glossar y The follo wing is an expla nation of some of the terms used in this guide which may be unfam iliar or which are not explai ned in t he te xt of this guide itself. Further information can be obtained by referring to other commercially-av ailable publications.
69 Glossar y Security loc k A de vice consisting of a projector case with a hole in it that a commercially-av ailable theft-pre vention cable can be passed through in order to secure the device to a table or pill ar . This projector is compatible with the Microsa ver Security System manufactured by K e nsington.
70 List of ESC/VP21 Commands Command Lis t When a po wer on command is sent to the projector , the po wer will turn on and the projec tor will change to w arm-up mode.
71 List of ESC/VP21 Commands USB Conne ction Setup In order to control the projector using ESC/VP21 commands via a USB connection, the follo wing preparations must be carried out. PROCEDURE A Download the USB driver (USB-COM Driver) from the EPSON website to your computer .
72 List of Suppor ted Monitor Displa ys * Connection is not possible if the equipment doe s not hav e a V GA output port. The projec tion of s ome signals not listed in the table m ay still be poss ible.
73 Specifications Product name EMP-X3 EMP-82 EMP-62 Dimensions 327 (W) × 86 (H) × 246 (D) mm (not inclu ding feet and spe aker) P anel size 0.6 inches Displa y method Polysili con TFT ac ti ve matri.
74 Specifications Saf ety USA UL60950 3rd Ed ition Canada CSA C22.2 No.60950 European Community The Lo w V oltage Dire cti ve (73/2 3/EEC) IEC60950 3rd Editi on EMC USA FCC Part 15B Class B ( DoC) Can.
75 W e :EPSON AMERICA, INC . Located at :3840 Ki lro y Air por t W ay MS: 3-13 Long Beach, CA 90806 T el :562-290-5254 Declare unde r sole responsibi lity that the product i dentified herein, complies with 47CFR P ar t 2 and 15 of the FCC rules as a Class B digital de vice.
76 Appearance EMP-X3 Units: mm 3-M4 × 9 115 127 80 12 104.7 327 83.7 50.1* 7.7 86 Centre of lens 69.7 12 *Distan ce from center o f lens to s uspens ion brack et fixing point 246.
77 Appe arance EMP-8 2/62 Units: mm 3-M4 × 9 115 127 80 12 104.7 327 83.7 50.1* 7.7 86 Centre of lens 69.7 12 *Distan ce from center o f lens to s uspens ion brack et fixing point 246.
78 Inde x A Air exhaust vent ............................. 6 Air filter ....................................... 10 Air intake vent ............................. 10 Angle of tilt.................................. 73 Aspect ratio .......................
79 Index Port ................................................ 9 Position ................................... 13 , 34 Power indicator ............................ 44 Power inlet .................................. 8 , 9 Power On Protect ...............
80 All rights reserved. No part of this publication m ay be reproduced, stored in a retriev al syst em, or transmitted in any form or by any means, electronic, mechanical, photoc opying, recording, or otherwise, withou t the prior written permission of SEIK O EPS ON CORPORA TION.
Een belangrijk punt na aankoop van elk apparaat Garmin EMP-X3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Garmin EMP-X3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Garmin EMP-X3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Garmin EMP-X3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Garmin EMP-X3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Garmin EMP-X3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Garmin EMP-X3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Garmin EMP-X3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
