Gebruiksaanwijzing /service van het product 41409 van de fabrikant Gastroback
Ga naar pagina of 15
GASTROBACK ® Instructions For Use Design Mincer Advanced Read all provided instructions before first usage! Model and attachments are subject to change Art.-Nr . 41409 Design Mincer Advanced (standard size 8) included accessories: 41409_DesignFleischwolfAdvanced_Manual_GermanEnglisch3.
Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions. ! Impor tant Instructions • A TTENTION: Always ensure that the appliance is turned off (the contr ol switch should be in OFF position) before connecting the plug to the power outlet.
20 Display and control switch Name of the units A) Pusher B) Feed pan C) Motor housing D) Screw plug E) Display F) Control switch G) Spanner H) Closing ring I) Grinding disc 2 mm J) Crossed-blade knife K) W orm L) W orm housing M ) Grinding disc 4,5mm N ) Grinding disc 6 m m NOTE: Y ou can store the grinding discs inside the pusher .
Design Mincer Advanced (standard size 8) Please read all the advice and instructions with care and keep the manual. The mincer is used for mincing meat (uncooked or cooked) and soft vegetables. Please prepare the ingredients before filling them into the feed chute.
responsible for their safety . Children should be super vised to ensure that they do not play with the appliance. • Store the appliance and units in a dr y , clean area out of reach of children . • The work space has to be easily accessible, solid, even, dr y and of sufficient size.
• T o avoid damage, do not use any abrasive cleaners, corrosive chemicals (i.e. disinfectants, bleach) or cleaning pads for operation or cleaning. Never clean or operate the appliance or units o f the appliance with abrasive or hard sharp-edged items.
24 Movable and sharp-edged units – risk of injur y • Never put fingers, wooden spoons or other foreign substance (such as hair , clothing, brushes, cloths) into the feed chute or the holes of the grinding disc when the appliance is plugged into the power point.
25 shocks. Never place the appliance on paper towels or uneven working areas. The air has to able to circulate. IMPORT ANT : Always ensure that the plug is not connected to the power outlet before assembling or disassembling the appliance. Place the mincer on a flat, dr y surface such as a bench top.
26 4. Mount the grinding disc on the knife. The arresting pin must lock precisely into the corresponding recesses (picture F). IMPORT ANT : If the tools overlap the edges of the worm housing the worm is not placed all the way inside the worm housing. T urn the wor m a little bit to make it fit inside but do not use force.
27 3. Place the sausage attachment on the worm housing (picture J) and fit the closure ring over the sausage attachment. Firmly screw the closing ring on the worm housing and tighten by hand. A TTENTION: Pay attention not to cant the screw . If the screw cants the screw thread gets damaged.
28 (hair , towels, cutler y) into the feed chute. Always use the pusher for this purpose! 4 . The display illuminates and you can see for 30 seconds ´Ready` blinking. ´Power`, ´Max`, 6 bars in different length, 6 arrows (3 pointing to the right and 3 pointing t o the left side) and a rotating symbol (picture A) are indicated in the display .
29 4. As soon as the last bit has run through the appliance turn the appliance off (by turning the control switch to OFF) and pull the plug. 5 . Clean and disassemble the appliance right after use and make sure that no leftover food desiccate on the appliance.
30 TIP: If the tools are stucked knock the mincer carefully on a stable cutting board. The grinding disc should be facing up. A TTENTION: Be careful not to damage your bench top, the cutting board or the mincer .
31 The motor stops running while operating. The overload protection might got activated. T urn the appliance off immediately and operate according to the instructions ´Clear a blocking`. After cleaning the motor does not get started • I s the power cord plugged in? again when turning the appliance ON.
off (by turning the control switch to OFF), pull the plug and clean the appliance according to the instructions ´Care and Cleaning`. Storage Always clean the appliance before storing.
Een belangrijk punt na aankoop van elk apparaat Gastroback 41409 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gastroback 41409 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gastroback 41409 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gastroback 41409 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gastroback 41409 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gastroback 41409 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gastroback 41409 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gastroback 41409 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
