Gebruiksaanwijzing /service van het product 500-2D van de fabrikant Alto-Shaam
Ga naar pagina of 27
MN-29742 (R e v . 1) • 04/13 p r i n t e d i n u . s . a . Drawer Warmers Electric Models : 500-1D, 1DN 500-2D, 2DN 500-3D, 3DN • InstallatIon • operatIon • MaIntenance W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • b Delivery ............................................................................. 1 Unpacking ..............................................................
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 1 DELIVERY This Alto-Shaam appliance has been thoroughly tested and inspected to ensure only the highest quality unit is provided. Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 2 CAUTION Used to indicate the presence of a hazard that can or will cause minor personal injury, property damage, or a potential unsafe practice if the warning included with this symbol is ignored.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 3 SITE INSTALLATION This Alto-Shaam appliance must be installed in a location that will permit it to function for its intended purpose and to allow adequate clearance for ventilation, proper cleaning, and maintenance access.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 4 12-5/16" (312mm) 24-5/8" (624mm) 43-3/8" (1101mm) 24-7/8" (631mm) 26-1/8" (664mm) 25-.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 5 26-1/8" (664mm) 31-3/16" (792mm) 11-5/8" (296mm) 18-15/16" (481mm) 500-1D 500-2D 500-3D El.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 6 1. An identification tag is permanently mounted on the cabinet. 2. Plug cabinet into a properly grounded receptacle ONLY, positioning the unit so the power supply cord is easily accessible in case of an emergency.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 7 This appliance is intended for use in commercial establishments where all operators are familiar with the purpose, limitations, and associated hazards of this appliance.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 8 1 . PREHEAT AT 200°F (93°C) FOR 30 MINUTES BEFORE LOADING FOOD. Push power switch to “ON” position. The unit will begin operating at the previous set temperature.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 9 GENERAL HOLDING GUIDELINES Chefs, cooks and other specialized food service personnel employ varied methods of cooking.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 10 CAUTION TO PROTECT STAINLESS STEEL SURFACES, COMPLETELY AVOID THE USE OF ABRASIVE CLEANING COMPOUNDS, CHLORIDE BASED CLEANERS, OR CLEANERS CONTAINING QUATERNARY SALTS.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 11 THOROUGHLY CLEAN DAILY : 1. Disconnect unit from power source, and let cool. 2. Remove, cover or wrap, and refrigerate food. 3. Remove drawer pans and clean separately.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 12 Food fl avor and aroma are usually so closely related that it is diffi cult, if not impossible, to separate them. There is also an important, inseparable relationship between cleanliness and food fl avor.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 13 THERMOSTAT ACCURACY The electronic thermostat is a precise instrument and is designed to offer trouble free service.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 14 TROUBLE SHOOTING - ELECTRONIC CONTROL INSTALLATION Code Description Possible Cause E-10 Cavity air sensor shorted Cavity air sensor reading < 5°F. Verify sensor integrity.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 15 SERVICE 1 23 4 5 6 27 26 25 22 21 24 10 19 20 16 15 18 17 11 12 13 14 9 7 8 23 SERVICE VIEW - EXTERIOR 500-2D Shown Part numbers and drawings are subject to change without notice.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 16 MODEL > 500-1D 500-2D 500-3D ITEM DESCRIPTION PART NO. QTY PART NO. QTY PART NO. QTY 1 TOP COVER 1012473 1 1012473 1 1012473 1 2 REAR TRIM 1012665 1 1012674 1 1012446 1 3 RIVET , BLIND, #44, S/S 28 RI-2100 24 RI-2100 28 RI-2100 30 4 GASKET ADHESIVE 0.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 17 SERVICE 3 4 5 1 2 12 11 10 6 13 8 7 9 SERVICE VIEW - DRAWER ASSEMBLY (5013915) 500-D Part numbers and drawings are subject to change without notice. ITEM DESCRIPTION PART NO.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 18 SERVICE 4 6 5 1 2 11 12 10 17 18 19 20 23 24 25 26 27 28 29 21 22 13 14 15 16 3 9 7 8 SERVICE VIEW - EXTERIOR 500-1DN Shown Part numbers and drawings are subject to change without notice.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 19 SERVICE MODEL > 500-1DN 500-2DN 500-3DN ITEM DESCRIPTION PART NO. QTY PART NO. QTY PART NO. QTY 1 TOP COVER 1012779 1 1012779 1 1012779 1 2 GASKET ADHESIVE 0.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 20 SERVICE 7 6 5 9 10 12 14 13 4 1 8 3 2 11 SERVICE VIEW - DRAWER ASSEMBLY (5014435) 500-DN Part numbers and drawings are subject to change without notice. Item #10 must be order ed when installing item #11 ITEM DESCRIPTION PART NO.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 21 SERVICE 6 5 8 7 4 3 1 2 10 9 SERVICE VIEW - ELECTRICAL Part numbers and drawings are subject to change without notice. ITEM DESCRIPTION PART NO. QTY 1 BUSHING, 3/8" HOLE BU-3419 1 2 ELECTRIC CHASSIS 5014441 1 3 WASHER, INT .
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 22.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 23.
MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 24.
TRANSPORTATION DAMAGE and CLAIMS All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee.
Een belangrijk punt na aankoop van elk apparaat Alto-Shaam 500-2D (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alto-Shaam 500-2D heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alto-Shaam 500-2D vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alto-Shaam 500-2D leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alto-Shaam 500-2D krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alto-Shaam 500-2D bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alto-Shaam 500-2D kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alto-Shaam 500-2D . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
