Gebruiksaanwijzing /service van het product 164D3333P069 van de fabrikant GE
Ga naar pagina of 60
GE Appliances GE Answer Center ® 800.626.2000 Par t No. 164D3333P069 Pub. No. 49-8827 JBP48 (coil) JBP79 (glass) Owner’ s Manual Ranges Self-Cleaning Electric.
Congratulations! Y ou Are Now Part of the GE Family . Welcome to the GE family. We’re proud of our quality products and we are committed to providing dependable service. You’ll see it in this easy-to-use Owner’s Manual and you’ll hear it in the friendly voices of our customer service department.
GE & Y ou, A Ser vice Partnership. Inside you will find many helpful hints on how to use and maintain your range properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your range.
All ranges can tip and injury could result. T o prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-T ip device supplied. T o check if the device is installed and engaged properly , remove the storage drawer and inspect the rear leveling leg.
Use this appliance only for its intended purpose as described in this Owner’ s Manual. When using electrical appliances, basic safety precautions should be followed, including the following: ■ Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.
■ Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot surface units or heating elements. Do not use a towel or other bulky cloth. ■ For your safety, never use your appliance for warming or heating the room.
7 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information WHEN COOKING PORK… When cooking pork, follow the directions exactly and always cook the meat to an internal temperature of at least 170°F .
■ Stand away from the range when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes. ■ Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury. ■ Keep the oven vent unobstructed.
9 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information ■ Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket. ■ Clean only parts listed in this Owner’s Manual.
IMPORT ANT SAFETY INFORMA TION. READ ALL INSTRUCTIONS BEFORE USING. 10 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Use proper pan size—select cookware having flat bottoms large enough to cover the surface unit heating element.
T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information ■ Clean the cooktop with caution. If a wet sponge is used to wipe spills on a hot cooktop, be careful to avoid steam burns. ■ Keep an eye on foods being fried at high or medium high heat settings.
■ Use care when touching the cooktop. The glass surface of the cooktop will retain heat after the controls have been turned off. ■ When the cooktop is cool, use only the recommended cleaning cream to clean the cooktop. ■ To avoid possible damage to the cooking surface, do not apply cleaning cream to the glass surface when it is hot.
13 Using the surface units. T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information How to Set Push the knob in and turn in either direction to the setting you want. At both OFF and HI the control clicks into position.
Using the surface units. Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Indicator Lights (glass cooktops only) A HOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cool enough to touch.
T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Selecting types of cookware. (glass cooktops only) The following information will help you choose cookware which will give good performance. Stainless Steel: recommended Aluminum: heavy weight recommended Good conductivity.
Using the oven controls. 16 9 10 11 3 4 5 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service 8 1 2 7 6 Thr oughout this manual, features and appearance may vary from your model.
Oven Control Settings BAKE Pad Press this pad to select the bake function. BROIL HI/LO Pad Press this pad to select the broil function. Display Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer on automatic oven operations.
Special features of your oven control. 18 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service 12 Hour Shut-Off W ith this featur e, should you f.
19 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Control Lockout Y our control will allow you to lock down the touch pads so they cannot be activated when pressed. Press the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows “SF.
20 Special features of your oven control. Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service 12 Hour , 24 Hour or Clock Black-Out Y our control is set to use a 12 hour clock. If you would prefer to have a 24 hour military time clock or black-out the clock display, follow the steps below.
21 T r oubleshooting T ips Installation Instructions GE Customer Service Operating Instructions Safety Information Changing the Speed of the + or – Pads As you use the + or – pads when setting a time or temperature, you may notice the display changes slowly .
T o avoid possible burns, place the shelves in the desired position before you turn the oven on. Befor e you begin… The shelves have stop-locks, so that when placed correctly on the supports, they will stop before coming completely out, and will not tilt.
23 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Aluminum Foil Never entirely cover a shelf with aluminum foil.
Br oiling guide. 24 Quantity and/ Shelf First Side Second Side Food or Thickness Position T ime (min.) T ime (min.) Comments Bacon 1/2 lb. (about C 4 1 ⁄ 2 4 1 ⁄ 2 Arrange in single layer . 8 thin slices) Ground Beef 1 lb. (4 patties) C 10 7 Space evenly .
Using the clock and timer . T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.
Using the timed baking and roasting features. 26 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Do not latch the oven door during timed cooking.
T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information How to Set a Delay Start and Automatic Stop Make sure the oven clock shows the correct time of day . Press the BAKE pad. Using the + or – pad, enter the desired temperature.
Adjust the oven thermostat—Do it yourself! 28 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Y ou may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it.
Using the self-cleaning oven. T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Never force the latch handle. Forcing the handle will damage the door lock mechanism. W ipe up heavy soil on the oven bottom.
Using the self-cleaning oven. Never force the latch handle. Forcing the handle will damage the door lock mechanism. 30 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service How to Set the Oven for Cleaning Latch the door.
T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information How to Delay the Start of Cleaning Latch the door. Press the SELF CLEAN pad. Using the + or – pad, enter the desired clean time. Press the ST AR T TIME pad.
Car e and cleaning of the range. 32 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is re-engaged properly when the range is replaced.
33 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Painted surfaces include the sides and the drawer front. Clean these with soap and water or a vinegar and water solution. Do not use commercial oven cleaners, cleaning powders, steel wool or harsh abrasives on any painted surface.
Car e and cleaning of the range. 34 Lift-Of f Oven Door The oven door is removable for cleaning. Do not lift the door by the handle. T o remove the door , open it to the special stop position. Grasp firmly on each side and lift the door straight up and off the hinges.
T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information 35 Oven Heating Elements Do not clean the bake element or the broil element. Any soil will burn off when the elements are heated. To clean the oven floor, gently lift the bake element.
Be sur e all surface units are tur ned of f befor e raising the cooktop. Car e and cleaning of the range. 36 Lift-Up Cooktop (electric coil models only) Some models have a cooktop that can be lifted up for easier cleaning. The entire cooktop may be lifted up and supported in the up position.
Be sure all the controls are turned to OFF and the surface units are cool before attempting to remove them. Sur face Units (electric coil models only) To clean the surface units, turn the control to the highest setting for a minute. The coils will burn off any soil.
Cooktop Surface Light When changing a cooktop light, do not touch the metal at the ends of the light. The cooktop light is easily replaced with a fluorescent tube of the same wattage. Before changing the light, pull the plug to the range or disconnect the power at the main fuse or circuit breaker panel.
39 Br oiler Pan & Grid After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container. Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.
Cleaning the glass cooktop. 40 Clean the glass surface with cleaning cream before you use the cooktop for the first time. Also, clean the glass surface after each use. This helps protect the top and makes clean-up easier . T o clean the cooktop seal, let a wet cloth rest on it for a few minutes, then wipe clean.
41 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Special Care Be sure to use a new sharp razor scraper .
Installation of the range. 42 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Befor e Y ou Begin IMPORT ANT : Save these instructions for the local electrical inspector’ s use.
43 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Pr epare the Opening Allow 1 1 ⁄ 2 ² spacing from the range to adjacent vertical walls above cooktop surface.
Installation of the range. 44 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Flooring Under the Range Y our range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting.
45 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Power Cord Strain Relief Installation Remove the lower rear range wiring cover to expose the connector block and bracket. Remove the knockout ring (1 3 ⁄ 8 ² ) located on bracket directly below the connector.
Installation of the range. 46 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully .
47 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information 4-Wire Power Cord Installation W ARNING: The neutral wire of the supply circuit is connected to the neutral terminal located in the center of the connector block.
Installation of the range. 48 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . 3-Wire Conduit Installation Remove the 3 screws from the connector block.
49 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information 4-Wire Conduit Installation Remove the 3 screws from the connector block. Remove the grounding strap from the connector block middle location and the screw connecting it to the frame of the range.
Installation of the range. 50 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Anti-T ip Bracket Installation An Anti-T ip bracket is supplied with instructions for installation in a variety of locations.
Befor e you call for service… T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information T r oubleshooting T ips Save time and money! Review the charts on the following pages first and you may not need to call for service.
Befor e you call for service… 52 T r oubleshooting T ips Problem Possible Causes What T o Do Food does not Oven is not set • Make sure you press the br oil properly at BROIL. BROIL HI/LO pad. Door not open to the • See the Using the broil stop position as oven section.
53 Problem Possible Causes What T o Do Food does not bake Oven controls • See the Using the or roast properly improperly set. oven section. Shelf position is • See the Using the incorrect or the oven section. shelf is not level. Incorrect cookware • See the Using the or cookware of oven section.
Befor e you call for service… 54 T r oubleshooting T ips Problem Possible Causes What T o Do Oven will not The oven temperature • Allow the range to cool to self-clean is too high to set a room temperature and self-clean operation. reset the controls.
Problem Possible Causes What T o Do Excessive smoking Excessive soil. • Press the CLEAR/OFF pad. Open the windows to rid the room of smoke. Wait until the LOCKED DOOR light goes off. Wipe up the excess soil and reset the clean cycle. Oven door will Oven too hot.
Befor e you call for service… 56 T r oubleshooting T ips Problem Possible Causes What T o Do LOCKED DOOR light The oven door was • Press the CLEAR/OFF pad. is on when you accidentally locked. Allow the oven to cool. want to cook Never force the door latch handle.
Problem Possible Causes What T o Do Glass Cooktop Models Fr equent cycling Improper cookware • Use only flat cookware of f and on of being used. to minimize cycling. sur face units Sur face units will not Improper cookware • Use pans which are maintain a rolling boil being used.
Befor e you call for service… 58 T r oubleshooting T ips Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Problem Possible Causes What T o Do Electric Coil Models Sur face units The surface units are • With the controls off, check not functioning not plugged in solidly.
59 T r oubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information GE Electric Range W arranty All warranty service provided by our Factory Service Centers, or an authorized Customer Care ® technician. For service, call 800-GE-CARES.
Printed in Louisville, KY 6-97 CG Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Service T elephone Numbers. The GE Answer Center ® is open 24 hours a day, 7 days a week. GE Answer Center ® 800.
Een belangrijk punt na aankoop van elk apparaat GE 164D3333P069 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen GE 164D3333P069 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens GE 164D3333P069 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding GE 164D3333P069 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over GE 164D3333P069 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van GE 164D3333P069 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de GE 164D3333P069 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met GE 164D3333P069 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
