Gebruiksaanwijzing /service van het product ASC-4G van de fabrikant Alto-Shaam
Ga naar pagina of 30
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.251.3800 • 800.558.8744 USA / C A N A D A FAX: 262.251.7067 • 800.329.8744 U . S . A . O N L Y www.alto-shaam.com M odel: ASC-4G Manual Control Convection Oven Gas • INSTALLATION • OPERATION • MAINTENANCE p r i n t e d i n u .
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control Delivery .................................. 1 Unpacking ............................... 1 Safety Procedures and Precautions ............ 2 Installation Site Installation ......
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 1 DELIVERY This Alto-Shaam appliance has been thoroughly tested and inspected to ensure only the highest quality unit is provided. Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 2 CAUTION Used to indicate the presence of a hazard that can or will cause minor personal injury, property damage, or a potential unsafe practice if the warning included with this symbol is ignored.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 3 INSTALLATION DANGER IMPROPER INSTALLATION, ALTERATION, ADJUSTMENT, SERVICE, OR MAINTENANCE COULD RESULT IN SEVERE INJURY, DEATH, OR CAUSE PROPERTY DAMAGE.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 4 INSTALLATION The oven must be mounted on the factory equipped oven legs or on an optional oven stand. Installation on a solid or concrete base that in any way restricts air flow may void the warranty.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 5 GAS SUPPLY & INSTALLATION GAS PRESSURE CHART The gas valve and burner have been fitted according to the gas type specified on the identification name plate.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 6 GAS SUPPLY & INSTALLATION DANGER Installation, air adjustment and/or service work must be in accordance with all local codes and must be performed by a certifi ed service technician qualifi ed to work on gas appliances.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 7 GAS SUPPLY & INSTALLATION GAS CONNECTION FOR OVENS ON CASTERS The oven must be supplied with a flexible connector that complies with The Standard for Connectors for Movable Gas Appliances, ANSI Z21.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 8 INSTALLATION This appliance is equipped with a three-prong grounding plug. For your protection against shock hazard this appliance should be plugged directly into a properly grounded three-prong receptacle.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 9 INSTALLATION VENTILATION VENTILATION HOODS Proper venting along with a sufficient quantity of make-up air is essential for proper oven operation.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 10 INSTALLATION CAUTION TO PREVENT PERSONAL INJURY, USE CAUTION WHEN MOVING OR LEVELING THIS APPLIANCE. STACKING KIT (5005783) STACKING INSTRUCTIONS A) Remove side panels. B) Knock out the mounting holes on top of the intended bottom oven.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 11 INSTALLATION STACKING, GAS PLUMBING & FLUE INTERCONNECT (5003788) 7 8 1 2 3 4 5 6 Rev 01/13 ASSEMBLY INSTRUCTIONS FIRST: Assemble plumbing items 2 thru 6 as shown NEXT: Assemble items 7, 8, & 1 as shown ITEM DESCRIPTION PART NO.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 12 INSTALLATION 8 1 1 7 3 4 2 9 1 2 34-5/16" (876mm) 5 6 2 38" (956mm) OVEN STAND ASSEMBLY ITEM DESCRIPTION PART NO.
OPERATING INSTRUCTIONS MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 13 PRODUCTPAN CAPACITY 72 lb (33 kg) maximum • 45 qts (43 liters) Twelve (12): 18" x 26&quo.
OPERATING INSTRUCTIONS MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 14 START-UP OPERATION BEFORE INITIAL USE: Interior oven surfaces must be heated to remove surface oils and the accompanying odors produced during the first use of the oven.
OPERATING INSTRUCTIONS MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 15 a c b e f d NOTE: Under normal operating conditions, the burner will ignite within four (4) seconds.
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 16 CHEF OPERATING TIPS The Alto-Shaam convection oven will provide the best results and longest possible service with the utilization of the following suggestions and guidelines.
CARE AND CLEANING MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 17 PROTECTING STAINLESS STEEL SURFACES It is important to guard against corrosion in the care of stainless steel surfaces. Harsh, corrosive, or inappropriate chemicals can completely destroy the protective surface layer of stainless steel.
CARE AND CLEANING MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 18 CLEAN THE OVEN ON A DAILY BASIS 1. After the oven has cooled, remove all detachable items such as wire shelves, side racks, and drip pan. Clean these items separately.
CARE AND CLEANING MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 19 TROUBLESHOOTING GUIDE TROUBLE POSSIBLE CAUSE REMEDY Oven has no power • Insufficient power supply • Defective power cord or plug • Defective power switch.
SERVICE MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 20 Part numbers and drawings are subject to change without notice. 2 3 4 5 7 6 20 17 19 16 9 10 11 12 14 13 15 8 21 22 18 1 ITEM DESCRIPTION PART NO. QTY ITEM DESCRIPTION PART NO.
SERVICE MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 21 Part numbers and drawings are subject to change without notice. DANGER Installation, air adjustment and/or service work must be in accordance with all local codes and must be performed by a certifi ed service technician qualifi ed to work on gas appliances.
SERVICE MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 22 Part numbers and drawings are subject to change without notice.
SERVICE MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 23 Part numbers and drawings are subject to change without notice.
SERVICE MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 24 Part numbers and drawings are subject to change without notice.
SERVICE MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 25 Part numbers and drawings are subject to change without notice.
SERVICE MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 26 Part numbers and drawings are subject to change without notice. PARTS LIST P/N DESCRIPTION QTY EXTERIOR 1006623 PANEL, OUTER, SIDE/TOP ..........................
MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 27.
TRANSPORTATION DAMAGE and CLAIMS All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee.
Een belangrijk punt na aankoop van elk apparaat Alto-Shaam ASC-4G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alto-Shaam ASC-4G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alto-Shaam ASC-4G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alto-Shaam ASC-4G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alto-Shaam ASC-4G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alto-Shaam ASC-4G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alto-Shaam ASC-4G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alto-Shaam ASC-4G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
