Gebruiksaanwijzing /service van het product C1433RD van de fabrikant GE
Ga naar pagina of 81
GE Digital Camera C1433 / Z4300 Appendix Camera connectivity Using the Menus Playback Camera function controls Basic operation Preparations User Manual imagination at work.
i This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the European countries. Please do not throw the equipment into the domestic refuse. Please use the return a nd collection sy stems available in your country for the disposal of this product.
ii ii 1 SAFE T Y PRECAUTIONS Camera notes: Do not store or use the camera in the following types of locations: • In the rain, very humid and dusty places. • In a place where the camera can be exposed directly to the sunlight or subject to high temperature, e.
ii 1 BEFORE YOU ST ART Preface Thank you for purchasing this GE digital camera. Please read this manual carefully and keep it in a safe place for futur e reference.
2 3 • Do not expose the lens to direct sunlight for extended periods. • Download all pictures and remove the batteries from the camera if you are going to store the camera for long periods of time. • Do not use abrasive cleansers, alcohol-based, or solvent- based cleaners to clean the camera.
2 3 3 WARNING .......................................................................i SAFETY PRECAUTIONS ................................................ii BEFORE YOU START .................................................... 1 Preface ..............
4 USING THE MODES ................................................... 24 LCD Screen Display ................................................................ 24 Still Picture Mode Display ............................................ 24 Video Shooting Mode Display .
5 Using the Delete Button ........................................................ 39 USING THE MENUS ................................................... 40 Still Menu .................................................................................. 40 AF Mode (Auto-Focus mode) .
6 6 7 Copy to Card (Copy internal memory to memory card) .................................................................. 59 Reset Settings ................................................................. 60 FW Version (Firmware version) ..........
6 7 GET TING RE ADY Your package should contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact your vendor .
8 9 Camera Views Front View Back View Right View 1 2 3 4 7 6 5 8 9 10 11 12 13 14 15.
8 9 9 Top View Left View Bottom View 1 Flash Lamp 12 Flash Mode/Right Button 2 Timer Indicator 13 Delete Button/Down Button 3 Lens 14 Face Detection/Left button 4 Microphone 15 Function/OK Button 5 LC.
10 11 Insert the Battery and SD/SDHC Card (Not included) 2. Insert the enclosed batteries into the battery slot in the correct direction. 1. Open the battery compartment .
10 11 11 4. Close the battery compartment . 3. Insert an SD/SDHC card (not included) into the memory card slot as shown..
12 13 12 13 Optional SD/SDHC cards are not included. The use of 64MB to16 GB memory cards from recognized manufacturers such as SanDisk, Panasonic and Toshiba is recommended for reliable data storage. To remove the SD/SDHC car d, open the battery compartment and gently push the card to release it .
12 13 12 13 Using the Mode Button The GE camera provides a convenient Mode Button that allows you to switch between dierent modes with ease. Press Left/Right button to choose the mode, press to select. All the available modes are listed as follows: Mode Name Icon Description Auto mode Switch to take still pictures in automatic mode.
14 15 Setting Language and Date/Time The Date/Time and Language setup will automatically appear when the camera is turned on the rst time. To s et the la ngua ge, da te, an d ti me, go to the follo win g s etup opt ions in the Setup menu. • Language • Date / Time To access the Setup menu, do the following: 1.
14 15 15 Setting the Date and Time 1. Use the Up/Down button to select Date/Time . Then press the Right button to enter the setting. 2. Press the Left/Right to highlight each eld and use the Up/Down to adjust the value. 3. Press the button to conrm the setting.
16 17 16 17 If the LCD monitor is damaged, take particular care with the liquid crystal in the monitor . If any of the following situations arise, take the recommended immediate action indicated below: • If liquid crystal comes in contact with your skin, wipe the area with a cloth and then wash thoroughly with soap and running water .
16 17 16 17 Your camera is equipped with two types of zoom functions: optical zoom and digital zoom. Press the Zoom button of the camera to zoom in or out on the subject while taking pictures.
18 19 Basic Functions Menu The Basic Function Menus of the camera include Flash, Self- timer, Macro Capture, and Exposure Compensation. The suitable function setting can let you shoot better photos. Set the basic functions as per the following steps: 1.
18 19 19 • Flash : Forced o Flash is turned o. • Flash : Slow Synchro This allows you to take pictures of people at night that clearly show both your subjects and the night time backdrop. • Flash : Red-Eye + Slow Synchro Using this mode for slow synchro shots with red-eye reduction.
20 21 Advanced Functions Menu The Advanced Functions Menu of the camera include Image Size, Image Quality, White Balance, Image Color and ISO etc. The suitable function setting can let you shoot better photos and videos. Set the advanced functions as per the following steps: 1.
20 21 21 WB (White Balance) The White Balance allows you to adjust the color temperature under dierent light source to ensure faithful color reproduction.
22 Quality The quality setting adjusts the compression ratio of the images. Higher quality settings give better photos, but will take up more memory space. The picture quality of image has totally three options: • Quality : Best • Quality : Fine • Quality : Normal Size The size setting refers to the image resolution in pixels.
23 Color The color setting allows you to add artistic eects directly when taking pictures. You can try dier ent color tones to alter the mood of your pictures.
24 25 LCD Screen Display USING THE MODES Still Picture Mode Display Mode: 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 17 18 19 20 2 1 1 Shooting Mode Icons Auto mode Scene mode Stabilization mode Portrait .
24 25 25 6 Remaining number of pictures 7 Memory card/built-in memory 8 Battery Status 9 WT Ratio (Displayed only when zoom is activated) 10 Zoom 11 Exposure 12 ISO Value 13 Histogram 14 Focus Frame 1.
26 Video Shooting Mode Display Mode : 1 13 2 3 4 5 6 7 8 9 10 11 12 1 Video Mode icon 2 Continuous AF Single-AF 3 Metering Spot Center AiAE 4 Video Quality 5 Focus Frame 6 Self-timer Self-time : 10-se.
27 Playback mode display Mode: 1 2 3 4 5 6 7 8 9 10 11 12 1. Play Mode icon 2. DPOF le 3. File protection 4. Picture Number 5. Memory Card/Built-in Memory 6. Battery Status 7. Image Zoom 8. The current display area 9. Aecting regional 10. Memory Space (this picture/Total number of pictures) 11.
28 29 28 29 Panorama mode Panorama Mode allows you to create a panoramic picture across a distant scene. The camera will automatically compose a panoramic picture using the individual shots that you take. Follow these steps to create a panoramic picture: 1.
28 29 28 29 In Manual Scene mode, you can select from a total of 20 scene types to match your needs. You just need to select the right scene for the occasion and the camera will automatically adjust to the optimal settings for you.
30 Sport For fast-moving subjects. Capture sharp action shots without blur. Indoor For indoors. Reduce blur and improve color accuracy. Snow For snow scenes. Reproduce natural and clear white scenes. Fireworks For reworks at night. Slow shutter speed adjusted for bril - liantimages.
31 ID For shooting certicates clearly. Fish eye For increasing interesting sh eye eect for shooting. Expand the centeral part intentionally to get distortional photo similar as watching through sh eye. Travel shooting For shooting fast moving object clearly with clear main body and owing sense of background.
32 33 32 33 This mode can help reduce photo blur caused by hand shake, low light and slow shutter speed Use stabilization mode in dark environments or when in slow shutter speed Shooting in a windy or unstable environment (such as a moving vehicle) may cause blurred images.
32 33 32 33 Face Detec tio n is enabl ed fun ctio n unde r n orma l stat e. In the Shoo ting m ode (ex cept f or Pan oram a Mode /Mo vie Mode), Fa ce Dete ction is enab led fu nct ion und er nor mal sta te, us ed to reco gnize fac es a nd foc us aut omat ically to mak e them cl ear er.
34 35 34 35 With the camera's new "Smile Detection" feature, which automatically detects and captures a person smiling, you'll never miss a smile. 1. In the Shooting Mode, press the Left/Smile Face Detection button to turn on the Smile Face Detection function and the icon ( ) appears on the LCD 2.
34 35 34 35 Viewing Photos and Videos PLAYBA CK To view the captur ed photos and video clips on the LCD screen: 1. Press button to go to the Playback mode. The last recorded photo or video clip is displayed. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card.
36 36 37 During video playback, you can press the Up/Down button to adjust the volume..
36 37 4. Use Up/Down/Left/Right button to sele ct a picture or video clip, press button to return to the original size. The Date Folder is displayed in order based on the shooting date. If the indicator appears on the LCD, then a movie le is currently being displayed.
38 39 38 39 Using Zoom Playback (for still pictures only) The zoom buttons can also be used during playback. This allows you to magnify photos up to 2 ~ 8X. 1. Press button to go to the Playback mode. 2. Use the Left/Right navigation buttons to select a photo to magnify.
38 39 38 39 Using the Delete Button In Playback Mode, you can press the Down/Delete button to delete pictures or videos. To delete pictures or videos: 1. Press button to go to the Playback Mode. 2. Select a picture or video clip you want to delete with the Left/Right button.
40 41 Still Menu USING THE MENUS Mode: In any of the above Still Picture Modes, press the button to go to the Still Picture menu. To adjust each setting: 1.
40 41 41 AF Mode (Auto-Focus mode) Use this setting to control the auto-focus mechanism while taking pictures. Two options are available: • Single-AF : The focus frame appears on the center of the LCD screen to focus on the subject . • Multi-AF : The camera automatically focuses the subject in a wide area to nd the focus point .
42 Expo Metering (Exposure Metering) Use this setting to select an area for the exposure to be obtained. Three options are available: • Spot • Center • AiAE (Articial Intelligence AE) Continuous Shot Use this setting to perform continuous shooting.
43 • Time-Lapse : Automatically capture pictures in a pre- dened interval. The ash is designed not to work in this mode in order to enable quick succession of shots.
44 44 45 Digital Zoom Use this setting to enable or disable the digital zoom function. When disabled, only the optical zoom is enabled..
44 45 Movie Menu Mode: In the Movie Mode, press the button to go to the corre- sponding Movie menu. To congure each setting: 1. In the Movie menu, switch between the Movie Setup or dierent Camera Setup pages using the Left/Right button, select the page with the function you want to adjust and press the Down button.
46 46 47 Expo Metering (Exposure Metering) Set metering mode for various lighting conditions. Three options are available: • Spot • Center • AiAE (Articial Intelligence AE) Continuous AF After Continuous AF is turned on, the camera will adjust focus automatically in response to any camera or subject movement .
46 47 Playback Menu Mode : In Playback mode, press the button to enter the Playback menu. Please refer to the following sections for detailed instructions on the various menu options. Protect To prevent any pictur es or videos from being accidentally erased, use this setting to lock one or all of the les.
48 3. Use the Up/Down button to select One to lock the selected picture or video, or select All to protect all pictures/videos stored in the built-in memory or memory card. 4. Press the button to select Yes to lock. For locked picture/video, use Unlock option to unlock it .
49 • Delete All : 1. In the Delete option, select All and then press button. 2. Use Up/Down button to select Yes to delete all les, or select Back to return to the menu. • Delete Date Folder: 1. In the Delete option, press button after selecting Date Folder.
50 Resize This setting allows you to resize a picture to a specified resolution, and saves it as a new picture. 1. Se l e ct t h e Resize setting from the P l a yb a c k me n u a s described previously. 2. Use the Left/Right navigation buttons to select a picture to resize.
51 If the message “The image cannot be edited.” appears, it means that the current image cannot be resized. Rotate You can use this setting to change the picture orientation of the picture. 1. Select the Rotate setting from the Playback menu as described previously.
52 53 Display Setup Mode : Press button in Playback mode to enter Display Setup menu. Refer to the following sections for details of every setting. Slideshow This setting allows you to view all the stored pictures as a slideshow . 1. Select the slideshow menu, press the right button to enter the options menu.
52 53 53 Wallpaper Settings Use this setting to select your favorite picture to use as a background on the LCD screen. 1. Pre ss Dow n bu tton to select the W allpape r Sett ing men u. 2. Press Right button, and the camera will enter the Wal lpap er Set tin g interface.
54 54 55 Welcome wallpaper : Use Up/Down button to select the Startup Screen option, press to conrm or press Left button to return to last page, and press to exit the menu.
54 55 Setup Menu Mode : The Setup menu for the camera is available in all modes. Each menu page can be selected by pressing the button and switching between menus with the Left/Right button. To adjust the settings: 1. Select the menu page with the function you want to adjust and press the Down button.
56 Beep Use this setting to adjust the vo lume of beep when buttons ar e pressed and change the tones for Shutter button, self-timer , and power-on/power-o. To change this setting: 1. Select the Beep setting fr om the Setup menu as described previously.
57 Power Saver This setting allows you to save power and get the maximum possible running time for your battery. Follow the steps below to turn o the LCD screen and camera automatically after a period of inactivity. 1. Select the Power Save setting from the Setup menu as described previously.
58 59 Date/Time See “ Setting the Date and Time “ section on page 15. Language See “ Setting the Language “ section on page 14. Format Memory Please note: formatting enables you to delete all contents in the memory card and built-in memory, including protected photo and movie les.
58 59 59 File Numbering After you take a picture or video clip, the camera will save it as le that ends with a serial number . You can use this item to choose whether the le is serially numbered or begins with 1 and is saved in another folder on the memory card.
60 60 61 FW Version (Firmware V er sion) Use this setting to view the current camera rmware version. 1. Select the FW Version in File and Software menu. 2. If SD card contains a new version of rmware, please upgrade accordingly as necessary. To update to the latest rmware version, you can go to the following website:www .
60 61 The video output signal can be switched to NTSC or PAL to accommodate dierent regional standards. The appr opriate setting will vary between regions. NTSC: USA , Canada, Taiwan, Japan, etc. P AL: Europe, Asia (excluding Taiw an), Oceania, etc.
62 63 Connecting to a PC Use the USB cable and ArcSoft software (CD-ROM) supplied with your camera to copy (transfer) pictures to a computer . Setting the USB mode Since the camera’s USB port can be.
62 63 63 Windows operating system (Windows 2000, Windows XP, Windows Vista, Windows 7.) Click the [Safely remove the hardware] icon and remove the USB connector according to the appeared menu. Macintosh Drag the untitled icon to the Trash. ("Untitled") 5.
64 65 Connecting to a PictBridge Compatible Printer PictBridge allows printing images from a memory card in a digital camera directly to a printer , regardless of brand. To nd out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the manual for specications.
64 65 65 Connecting the camera and printer. 1. Make sur e both the camera and printer are turned on. 2. Connect one end of the supplied USB cable to the USB port on your camera.
66 67 After setting the USB mode to Printer, the PictBridge menu appears. Select a menu item with the Up/Down button and press the Right button or button t o enter the item. Refer to the following sections for more detailed information on each setting.
66 67 67 3. Use the Up/Down navigation buttons to select the number of prints for the current displayed photo. 4. Press the button and the following screen appears. 5. Select Yes to conrm the printing, or Cancel . Then pr ess the button. Print without date Use this setting to print the photos without dates on them.
68 5. Select Yes to conrm the printing, or Cancel . Then pr ess the button. Print index You can use this setting to print all indexes to show all the photos currently in your camera. 1. Select Print index from the PictBridge menu. The following screen appears.
69 Print DPOF (Digital Print Order Format) To use DPOF printing, you must make the selection of photos for printing using the DPOF settings before hand. See “ DPOF ” section on page 49. 1. Select Print DPOF from the PictBridge men u. The follow- ing screen appears.
70 71 Eective Image Sensor Pixels 14.1 Megapixels Image Sensor 14.4 Megapixels [1/2.3” (CCD)] Lens Focal Length F = 5.2mm (Wide) ~ 15.6mm (Tele) 35mm lm equivalent 29mm (Wide) ~ 87mm (Tele) F number F3.
70 71 71 Number of Recording Pixels Still Image 14MP, 12MP(3:2), 10MP(16:9), 8MP , 5MP, 3MP, 0.3MP Movie 640x480pixels: 30fps/15fps, 320x240pixels: 30fps/15fps Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format Still Image Exif 2.
72 Pan-Capture Panorama Yes LCD Display 2.4 inch (112,320 pixels) LTPS (low-temperature polycrystalline silicon) TFT color LCD ISO Sensitivity Auto, ISO80/100/200/400/800/1600 AF Method Single AF, Mul.
73 Internal Flash (Shooting Range) Auto/Red-Eye Reduction/Forced Flash/No Flash/Slow Synchro/Red-Eye Reduction+Slow Synchro Shooting Range Wide: Approx. 0.3m~4.4m / Tele: Approx. 0.5m ~ 3.4m Recording Media Internal Memory: 18MB SD Card/SDHC Card (Up to 16GB support) Other Features PictBridge, ExifPrint Support, Multi-language Sup port Jacks USB2.
74 75 Error messages Messages Explanation No card • The memory card is not inserted. Card error • The memory card is not formatted. Card full • The memory card is full and cannot store any new images. Write protect • The memory card is write-protected.
74 75 75 Messages Explanation When the camera is used for longer than the specied time it may be damaged. • During underwater recording or shooting, the camera was kept under water longer than the specied time. Card is not formatted, format? • Conrm whether the memory card should be formatted.
76 77 Troubleshooting Problem Possible causes Solution Camera does not turn on. • The battery has run out. • The battery is not inserted cor- rectly. • Replace with a fully charged battery. Camera turns o suddenly during operation. • The battery has run out.
76 77 77 Problem Possible causes Solution No picture is taken when pressing the Shutter button. • The memory card is full. • No available space to store the les. • The mode dial is in Playback mode. • Replace the memory card with a new one or clean o current memory card.
http://www . ge.com/digitalcameras © 2010 General Imaging Company Printed in China.
Een belangrijk punt na aankoop van elk apparaat GE C1433RD (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen GE C1433RD heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens GE C1433RD vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding GE C1433RD leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over GE C1433RD krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van GE C1433RD bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de GE C1433RD kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met GE C1433RD . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
