Gebruiksaanwijzing /service van het product EXT-HDMI-844 van de fabrikant Gefen
Ga naar pagina of 21
www.gefen.com f 8x4 Matrix for EXT-HDMI-844 User Manual ®.
ASKING FOR ASSIST ANCE Rev A2 T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday Paci fi c Time Write T o: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The 8X4 Matrix For HDMI 7 LED Array 8 RMT -16IR Remote Description 9 IR Code Con fi.
1 Congratulations on your purchase of the 8x4 Matrix for HDMI. Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE 8X4 MA TRIX FOR HDMI • Important Note: The 8x4 Matrix for HDMI incorporates a 2x1 switch in front of each input on a traditional 4x4 matrix. This allows for the connection of up to 8 different HDMI source devices with a maximum of 4 sources available for viewable at any one time.
3 Features • Switches any eight HDMI™ sources to 4 Displays • Distributes any of the four switched inputs (total of eight inputs) to any combination of the four HDMI™ output displays • Maint.
4 Front Panel Back Panel 10 1 6 7 8 9 2 3 4 5 11 P ANEL LA YOUT.
5 1 Selected Input LED Indicator Each of the 4 outputs has an 4 LED array to indicate which source is currently selected on the 8x4 Matrix for HDMI. Each of the inputs can accept up to 2 sources (A and B) and the LED array will behave in 2 modes to indicate which of the two sources for input is selected.
6 How to Connect the 8x4 Matrix for HDMI 1. Connect up to 8 HDMI source devices to the 8x4 Matrix for HDMI using the included HDMI cables. NOTE: Please be aware that each input has two available HDMI ports and that only one will be active at any given time.
7 LED ARRA Y The LED array on the 8x4 Matrix for HDMI is designed to inform the user of the current source to output routes. Each output has a 4 LED array that will indicate which source is currently selected.
8 The RMT -16IR remote control will allow the user to select which source will be routed to which output. Each of the 4 outputs are assigned a group of 4 buttons that will correspond to the 4 source inputs. Each button on the RMT -16IR remote control will toggle between the “A” and “B” sources for each input.
9 Why would I need to change the remote channel? In some instances, the 8x4 Matrix for HDMI may use IR codes that con fl ict with other IR remote control devices. The unit may switch inputs when another brand IR remote control is used or the RMT -16IR may cause other brand IR controlled devices to behave unexpectedly .
10 EDID MANAGEMENT FEA TURE EDID. What is it and what is it used for? Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess what resolutions and features are available.
11 EDID MANAGEMENT MODES EDID Modes The diagram below illustrates the 8 DIP switch bank. DIP SWITCH Function 1 EDID Mode 2 EDID Mode 3 IR Channel 4 IR Channel 5 EDID Mode 6 N/A 7 EDID Mode 8 N/A Use DIP switches 1, 2, 5, and 7 to select the desired EDID management mode.
12 RS-232 SERIAL COMMUNICA TIONS What features are available via the RS-232 serial communications port? The 8x4 Matrix for HDMI can accept commands through the RS-232 serial communications port located on the rear panel. The current RS-232 control features are: • Switching/routing of inputs to outputs without the RMT -16IR remote control.
13 Switching/Routing Binary T able ASCII Command Input Output ASCII Command Input Output A1/a1 1A 1 C1/c1 1A 3 A2/a2 1B 1 C2/c2 1B 3 A3/a3 2A 1 C3/c3 2A 3 A4/a4 2B 1 C4/c4 2B 3 A5/a5 3A 1 C5/c5 3A 3 A.
14 Video Ampli fi er Bandwidth ....................................................................... 165 MHz Input Video Signal .............................................................................. 1.2 V olts p-p Input DDC Signal .........
15 W ARRANTY G e f en warrants the equipment it manu f actures to be f ree f rom de f ects in material and workmanship. I f equipment f ails because o f such de f ects and G e f en is noti fi ed with.
.
.
20600 No r dho ff St . , Ch a t sw o r th CA 91311 1-800-5 4 5-6900 818-772-9100 fax : 818-772-9120 www. ge f e n. co m su ppo r t@ge f e n. co m Rev A2.
Een belangrijk punt na aankoop van elk apparaat Gefen EXT-HDMI-844 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gefen EXT-HDMI-844 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gefen EXT-HDMI-844 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gefen EXT-HDMI-844 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gefen EXT-HDMI-844 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gefen EXT-HDMI-844 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gefen EXT-HDMI-844 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gefen EXT-HDMI-844 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
