Gebruiksaanwijzing /service van het product GDVRH-616 van de fabrikant Genie
Ga naar pagina of 93
0 GDV RH Se ries DIGIT AL VIDEO RECO RDERS Use r Guide GDV RH-604 4 Channels GDV RH-608 8 Channels GDV RH-616 16 Channels .
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVI CING TO QUALIFIED SERVICE PERSONNEL.
2 Contents Disclaimer ............................................................................................... 5 Warning ................................................................................................... 5 Caution .........
3 1. LOG IN/OUT. ................................................................................................... 29 2. NAVIGATION THE MENU .............................................................................. 30 VI. SETUP ........
4 7.3. PTZ EVENT ..................................................................................................................... 67 8. SYSTEM ...................................................................................................
5 Disclaimer The information in this manual is believed to be accurate and reliable as of the date of publication. The information cont ained herein is subject to change without notic e.
6 dry cloth on a regular periodic basis and wipe away the dus t and dirt that collects on the device. In dusty, humid or greasy environments , the dust that collects around the ventilation or the slots on the out er casing over long per iods of time may become saturated with humidity and short-circuit, leading to fire.
7 Preventing Malfunction Avoid Strong Magnetic Fields. Ne ver place the DVR in close Prox imity to electric motors or other equipment generating strong electromagnetic fields. Ex posures to strong magnetic fields may cause malfunctions or corrupt image data.
8 Package Contents Please check the package and content s for visible damage. If any components are damaged or missing, do not attempt to use the unit, contact the supplier immediately. If the unit m ust be returned, it must be shipped in the original packi ng box.
9 I.CONTROLS 1. Front Panel 1) POWER : Press this button to turn the power on; press again to turn the power off. The POWER LED (red) lights/goes off when the power is on/off. 2) Playback / Record Control : Used to St art and Stop Recording or Pl ayback.
10 8) DISPLAY: Press thi s button to display the cameras in multi-screen mode or to switch sequence function. 9) Remote control signal receiver : Do not block t he receiver as the remote controller needs the line of si ght to the receiver. 10) PAN/TILT: Press this button to control a PAN/TILT/ZOOM camera via RS-485 connection.
11 2. Rear Panel Connectors 4-Channel 8-Channel 16-Channel.
12 1) Camera Inputs : BNC input connectors (4 / 8 / 16CH) 2) Camera Outputs : LOOP-OUT connectors ( 4 / 8CH : BNC, 16CH : D-SUB to BNC ) 3) Spot out connector : 4 / 8CH : 2SPOT O UT, 16CH : 4SP O T O U T 4) ALARM IN : 4/8/16 alarm/sensor inputs 5) RS-422 : For connecting to PTZ camera.
13 3. Remote Controller DVR ID: Set the proper DVR System ID through whic h to operate. Press the ID button, and then press the number button wit hin two seconds to select the system ID of the DVR. If you set the System ID to Zero, you can cont rol m ultiple D V R s at the sam e tim e .
14 4. Virtual Keypad for Mouse Control This DVR provides a virtual on-screen keyboard to perform the control by mouse. Connect a mouse via USB port before use. I f you click right button of your mouse in Li ve mode and Playback mode, y ou will see follow ing virtual contro ller.
15 II. INSTALLATION & CONNECTIONS 1. Camera, Monitor, Audio, Alarm sensor and Power cord Audio Audio Input Output impedance (0 dB) 10 k Ohm 300 ohm voltage range 1 Vpp 1.
16 2. Alarm inputs and Alarm outs 2.1. Connection of N.O (Normally Open) The maximum of Alarm output is 1A 30VDC, 0.5A 125V AC. * Alarm Input( AI) 4ch : 1~4 8ch: 1~8 16ch : 1~16 * G GND.
17 2.2. Connection of N.C (Normally Close).
18 3. PTZ and controller connection 3.1. Connecting the Speed Dome directly into DVR 3.2. Connecting Both Speed Dome and DVR via J-box.
19 3.3. Connecting Single User with 2 DVR Configuration Multiple PTZ cameras are connected by daisy-chai ning the camera connection. Multiple Keyboards are connected by cascade connect ion.
20 4. PC system requirement for Network connection. (a) Pentium-4 2.0GHz or Higher (b) 512MB RAM (c) Windows 2000, ME, Windows XP, Window Vista, Window 7 (d) 16MB Video Card (e) 10/100/1000-BaseT .
21 III.QUICK START PAGE ADMIN and the default password is “ 000000 ” The Default User ID “ admin ” and password to run the EMS software is “ 0 ”.
22 Time & Date Setting When the DVR is powered on for the very fi rst time, the time and date are set as defaul t to January 1, 2009 Thursday 01:00: 00. Before any other operation of the Digital Video Recorder, it is i m portant to set up the time and the date.
23 IV.LIVE VIEWING 1. Display Overview 1. Recording Mode Background color of Number w ill be differe nt based on the recording status. 1) Red - Event (M otion/Alarm) Recording 2) Yellow - Continues Recordi ng 3) Black - No Recording. 2. Event Indicator (1) Indicate Alarm In terminal is tri ggered by an alarm sensor.
24 3. Status Bar (1) Indicate Built-in CD/ DVD R/W is connected. It’s changed to blue color while it ’s doing backup. (2) Indicate an USB Device is connected on Front panel. It’s changed t o blue color while it’ s doing backup. (3) Indicate an USB Device is connected on Rear panel.
25 2. Multi-screen Display and Sequencing 2.1. Screen Display. Select any camera for Full screen display by pressing the Number button of the desired camera. 2.2. Multi-screen Display and Switch Sequencing Display. 1) Press [DISPLA Y] buttons to activate t he m ultiscreen di splay.
26 3. Quick button for multi screen Display. 3.1. Quick multi split mode change - Press F1 button on the remote controller + <Number> For exam ple, press F1 button then number 8. The eight channel view m ode w ill be displayed. <Note> 6,4,8,10, 13 split mode must be checked on <Spit m ode> to use this function.
27 4. Zooming During live vi ew m ode, it i s possible to zoom into a section of the screen t o get a close-up view of the screen. 1. To acti vate the digital zoom, select the full screen di splay of the cam era you wish to zoom. 2. Then press the [ZOO M ] button on IR Remote controller.
28 5. Spot Monitor In addition t o the M ain Monitor, at taching a Spot Monitor enables user to monitor specifi c channels independently form the main monitor.
29 V. OPERATION 1. LOG IN/OUT. You must log on to the DVR with valid passwor d to operate the DVR. By default, it comes with one logi n account; ADMIN and the def ault password is “ 000000 ”. <Note > If you are logging on f or the first time, the system does not prompt you to change the default password.
30 2. NAVIGATION THE MENU 1. Log on the DVR at admin level or user wi th configure level. * User with configure feature is li mit ed to access [DISK and System Menu]. 2. On the front panel or remote control, press [MENU]. Using the mouse, cl ick wherever on monitor, Virtual rem ote control will be appeared.
31 VI. SETUP 1. DISPLAY 1.1. GENERAL 1. The menus are displayed with options on t he left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the Direction buttons [ ] . 2. Change below options using [ D EC/INC] buttons.
32 1.2. SWITCH Setup (Monitor Configure) 1. The m enus are displayed wi th options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the Di rection buttons [ ] . 2. Settings 1) Devi ce: Each Monitor may be configured in di fferent way.
33 4) SPLIT MODE : Select desired sequence mode to switchi ng. <note > This function is l im ited to use on SPOT Monitor in this model. 5) USE CHANNEL: Select the cameras to be incl cuded or excluded from the automatic switching. 3. Save changes and exit the menu, press [MENU] button.
34 2. CAMERA 1. Press Left/Right buttons [ ] or number button to select the desired camera 2. Camera Channel option i s highlighted and the camera settings are di splayed. The menus are displayed with opti ons in the left-hand column and settings i n the right hand column.
35 2.2. PTZ Set Up PTZ devices are connected to t he RS-422 ports located on the back of the unit . Multiple PTZ cameras are connected by daisy-chaining the camera connections. This DVR all ows you to address and control multipl e PTZ cam eras on an individual basis.
36 2.3. Camera Title Allows you to create a unique name for each camera. The camera title has the following guidelines: - Characters: A to Z, 0 t o 9.
37 2.4. Motion Detection Setting To Configure Motion Area : 1. Select Camera number button to conf igure the desired camera. 2. Select Category f or “GRID ”. Settings are shown at defaul t levels. 1) Motion Level : The sensiti vity settings are : 1: Low sensi tivity ~ Level 20: High sensitiv ity .
38 2.5. Privacy Mask Privacy Mask allows you to mask certain areas in the surveillance vi deo for privacy protection under related laws, policies and regul ations.
39 3.1. Record General 1. The m enus are displayed wi th options in t he left-hand column and settings in t he right hand column. A cursor (highlighted menu) can be moved using the directional buttons [ ] . 2. Change the options shown below usi ng the [DEC/INC] buttons.
40 Quality NTSC PAL UNIT 720*480 720*240 360*240 720*576 720*288 360*288 LOW 11. 7 5.8 2.9 14.0 7.0 3.5 KB MIDDLE 15.0 7.5 3.8 18.0 9.0 4.5 KB HIGH 18.3 9.2 4.6 22.0 11.0 5.5 KB SUPER 21.7 10.8 5.4 26.0 13.0 6.5 KB ULTRA 25.0 12.5 6.3 30.0 15.0 7.
41 3.3. Continues /Normal Recording The DVR comes with certain preset settings from the factory. Th erefore, once t he DVR is installed immediate recording is possi ble by pressing the record button. By default, audio, alarm, motion recording are of f.
42 3.4. Event Recording Users can set different event recording parameters on a camera by camera basis. Set the continuous recording to [OFF] and configure t he Event Recording speed and Quality f or each camera. Determine whether Al arm, Motion, Video Loss is used f or EVENT recording on the [DAY EVENT] tab.
43 2) Motion Recording One Motion detection can be configured to one channel. One camera channel can be assigned to multi ple motion detection. a. Press [-, +] button to change the value or select options. W ith a mouse, use the wheel. b. [ ] indicates multi p le alarm sources are selected.
44 - Press [enter] to edit multiple events. The menus are displayed wi th options in the left-hand col um n and settings i n the right hand column. A cursor (highlighted menu) can be moved using the directional buttons [ ] on the IR remote or front panel.
45 When the schedule is on, users can defi ne their own daytime, night time, as wel l as specified date settings. A schedul e can be used to record selected cameras at different times, change record rates, and select whether Alarm or Event is enabled.
46 3) Detailed menu pops up for the selected day, as shown below. a. Use [-, +] button to change the values. Mode : [Night ] [Day] [No Rec] BEGIN: T he tim e recording starts. END: The time recording ends. The end time must not be before t he starting time or the same as the starting time.
47 as a weekday schedule, the holi day schedule overrides the weekday schedule. 1) A cursor (highlighted menu) can be mo ved using the directional buttons [ ]. 2) Select each day to configure, press [Enter] or click the m ouse button . 3) Use the [-, +] buttons t o change the values.
48 5.1. DISK Manager Disk Manger is used to f ormat hard disks and to assign the HDD usages, such as back up or mirroring. 1. Select 1) The menus are displayed wi th options for all installed HDD’s or ODD l ist. 2) Press up/down [ ] buttons to high l ight Hard Disk or ODD, then press [-, +] button to sel ect.
49 at the same ti me. It automaticall y configures one HDD for Recording and t he other for Mirroring. 5) Initiali se for Back Up : Selected device, such as Media or Exte rnal HDD, is f orm atted for backup use. Here’s the guide for backing up data to various devi ces.
50 5.2. Recording DISK This information lists the i nstalled drives, how the DVR records video and thei r respective capacities which are currently bei ng used for recording. 1. Size, Range : This displ ays current recorded data size, HDD si ze and indicated st ored data range, and where the writing progress i s running 2.
51 5.3. S.M.A.R.T STATUS Displays HDD inf ormation, such as Bad Sector, Temperat ure and HDD running time. S.M.A.R.T i nformation has slight di fferences between dependi ng on the HDD manufacturer.
52 6. NETWORK A static service consists of an IP address t hat remains constant for the duration of the contract of the int ernet service, whereas a dynamic service has an IP address that changes every time a new connection is made through t he provided modem , or recurrently in a gi ven period of time.
53 6.2. GENERAL 1. Access Port: Select “0001 ~ 9999” Enter the port number the client uses to co mmunicate wit h the DVR over the internet. The default port is 7000. It is recommended to use a port above 1000. 2. Bandwidth: Select the network bandwidth to limit the amount of network resources allocated to cli ent connection.
54 5. Stream Property: Is activated when you select dual streaming. 6. Access Host and Host List: Allows you to access or deny specific IP address. To allow or deny remote access requires you to enter a range of IP addresses as an IP address and mask.
58 This DVR allows you to speci fy the event s that generate notification. Sends e-mail notifi cation if an event occurs, such as alarm, motion det ected etc. The mail server can use either the DVR mail server or your existing e-mail settings. The menus are displayed with options in the l eft-hand column and settings in the right hand column.
59 5. Log: This DVR will mail Log List at selected intervals. 6. Attach Picture: While in recording mode, a picture can be att a ched to m ail. 7. E-mail Address: 5 mail addresses can be configured f or m ail noti fication. 6.4. SMTP This menu is activat ed when you check <SM P T> on EM AIL.
60 6.5. DDNS (Dynamic DNS) This DVR offers free dynamic DNS update. It k eeps track of your changing IP address. It’s easiest to use. The menus are displayed with options in the l eft-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the directional butt ons [ ].
61 2) DYNDNS : To use your own domain name service or “dyndns.com” 2. The following settings are only needed if you are NOT usi ng the default. 1) Domain Name: Ent er the name you set for the DDNS web confi guration. 2) User ID : E nter your u s e r ID .
62 6.6 Router & Port Forwarding A majo rity of networks w ill often cons ist of a single IP address w hich share s internet access through a router. Thi s IP address may be any ex ternal (public) static IP address or any dynamic IP address issued by the Internet Servi ce Provider.
63 1) Description of Locat ion. A. LAN: Connect by Local I P. If you are connecting from withi n your network you only need to enter the IP address of t he system into the S/W (example 192.168.0.50) B. WAN: Connect by DDNS. If you are connecting from outside your network use the DDNS to configur e the S/W (example L123456.
64 7. DEVICE 7.1. GENERAL This DVR support 4/8/16 channel Audio, Alarm Inputs, 4 x Relay Outputs and supports HDMI output. 1. The menus are displayed wi th options i n the left-hand col um n and settings i n the right hand column. A cursor (highlight ed m enu) can be moved using the directional but tons [] .
65 2. Save changes and exit t he menu, press the [MENU] button. Exit the menu without making changes , press the [CANCEL] button. 7.2. ALARM This DVR supports 4/8/16 Alarm Inputs and 4 x Rel ay Outputs. One Alarm Input can be configured to one Rel ay Output.
66 - Change the opt ions below using the [DEC/INC] but tons on the IR remote, or click the mouse. - System m enu contains below HDD Di sk Fail Record System Fail Temperature Warning.
67 7.3. PTZ EVENT When an Alarm is triggered, Motion detected or Video Loss occurs, thi s DVR sends a preset command to a PTZ camera. The PTZ option must be enabled and a protocol must be assigned to the camera channel. 1. Channel: Select desired PTZ camera.
68 8. SYSTEM 8.1. GENERAL 1. Contro l ID: Each DVR that is preconf igured with the control ID is enabled to respond to, and be operated by, t he rem ote control. - To select the DVR to be controlled with t he remote controll er, press and hold the DVR ID button.
69 8.2. TIME Make sure to set up your Date and Time before start ing to Record. 1. Use Left/Right buttons [ ] to select on “Time” m enu tab. The menus are displayed with options i n the left-hand column and settings in t he right hand column. A cursor (highlighted menu) can be moved using the directi onal buttons [ ].
70 8.3. ACCOUNT . 1. Use the Left/Right buttons [ ] to select “Account” menu tab. The menus are displayed with options i n the left-hand column and settings in the ri ght hand column. A cursor (highlighted menu) can be moved using the directi onal buttons [ ].
71 4) Channel Allow each user different live channels for monitori ng. 5) Password Enter the 6 characters f or the new passwor d, and then re-enter the same password under the COMFIRM section. An asterisk is displ a yed for each character entered.
72 8.4. UPDATE 1. Download the l atest fi rmware file and copy to USB Fl ash memory stick in the Root directory. 2. Connect or insert i nto Front USB (please stop recordi ng first). 3. Use directio na l b u tto n s to m ove to the [Start] b u tto n .
73 5. Use the directional butt ons to m ove to the [Start] button, t hen press [+] button to start updating. While updating, an ”in progress” message is displ ayed. 6. After the updat e process is complete, a “Success” message is displayed.
74 VII. PAN/TILT ZOOM CONTROL PTZ control is availabl e for supported third- party dome cameras. The PTZ option must be configured for each camera channel. For PTZ setup, refer to Camera M enu> PTZ setup . The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote controller.
75 Zoom In and Out. 1.1 How to Control PTZ Using a Mouse Users can control PTZ camera using the mouse controller. It foll ows the m ouse cursor instead of using the directi onal button to move. 1) Press the PTZ button on the virtual remote controller.
76 5) To escape from PTZ m ode, press the ESC button on the PTZ controller. Or cl ick right button, outside the control box, to return to the virtual remote controller. Then click the ESC button. 2. Preset & Tour Button Function Set preset position; SPOT OUT on remote controller Move the PTZ into the desired location.
77 2.1 Tour Group A preset Tour Group allows a camera to move through a programmed sequence of PTZ presets. 1) Communication set tings. :Configure appropriate model and t hen enter the corresponding baud rate, PTZ ID (address).
78 3. Custom Functions Button Function PTZ custom function 1; DI SPLAY on remote controller PTZ custom function 2; Z OOM on rem o te controller PTZ custom function 3; P/ T/Z on remote controller 4.
79 VIII.PLAYBACK /SEARCH The DVR supports 2 playback modes; Playback and Search. The DVR offers a variety of search functions that enable you to quickl y and efficiently locate and revi ew a specific period from the database. It supports three different search modes: Date/Time, Event, Event Area and Log Search.
80 using the mouse, double cl ick. 4. The DVR starts the playback mode, displ aying all channels. Any channel number or the DISPLAY button may be pressed to change t he display mode. 2.2 Preview Search (S ingle Channel Playback) The DVR allows you to quickl y review a singl e channel of playback over a period of Day, Hour, and Minute.
81 number, or the DISPLAY butt on, can be pressed to change the display mode. 2.3 Event Record Search Event Record search feature allows you to search for recorded video by event. The time search tabl e displays time events. As a def ault, the TIME SEARCH CHART displays CONTINUOUS recordi ng (Yellow) and EVENT recording (Red).
82 <Note> EVENT RECORD is set by defaul t and makes the TIME SEARCH CHART display EVENT recording i n Red as above FIGURE 1. 2.4 Event Source Search Event source search featur e allows you to search the recording data for ALARM, MOTION and VLOSS events previ ously triggered on t he DVR.
83 2.5 Motion Area Search (Single Channel Playback) The DVR searches for recorded video that ma tches the search area defined by sel ected cells. 1. Select “MOTION AREA” (single channel pl ayback) to search the recording data t hat has motion in a specific area on a cert ain channel.
84 3. Go to Search 1. Press the [Time Search] button for 2 second and the [Time Input] menu pops up. 2. Set the date and time you wish to search. 3.
85 4. Log List Search The logs can be used to search, and to review, any point in time of the recorded data. Alarm, Motion, Video Loss and system related logs can be searched and pl ayed back directly from the time of t he incident.
86 IX.BACKUP 1. Manual Back Up 1.1 Internal DVD- R/W <Note> Backup process to the CD-RW and DVD-RW only works on manual method, due to the limited capacity of the medium. 1. Insert a blank Media Disk int o Built-in CD (not BDVR). <Note> Please note that CD/DVD-RW disks must be form atted before backup.
87 The progress of the backup is displayed at t he bottom of the window as a percentage of the enti re backup process. Please note that the int ernal CD-RW icon’s colour will change to blue to signify that backup is in progress. The OSD disappears by pressing cancel butt on.
88 1.2 External USB HDD/ Memory Stick The external drive procedure is the same as using the internal CD/DVD-RW for backup. To read USB backup HDD in Window, f ormat to FAT32 or NTFS. To backup a s a n A V I File, set the file fo rm at to AV I us in g the [+] butto n .
89 2. Auto Back Up (FTP) 1. Use the [-, +] butt on to change the selected device to FTP 2. Use the directi onal buttons to move to FTP Setup. The menus are displayed wi th options in the left -hand column and settings in the right hand column.
90 3. Log List Back Up . Plug the USB memory stick into the USB port. . Press the “Log” button to see the DVR Log List. . Press the “back up” button to save the log list to USB m em ory stick. 1) Use the [-, +] buttons to sel ect a device.
91 X.SPECIFICATION Specification 4CH 8CH 16CH System Multiple Function Quadraplex Operating System EMBEDDED LINUX Video Input/ Loop Out 4 IN, 4 OUT 8 IN, 8 OUT 16 IN, 16 OUT Video Output Main 1 Co.
92 DATA Archiving Ethernet, Remote PC, External Recording Devices, FTP Time Time Zone Selectable DST AUTO Time Synchronization S upported via NTP server Miscellaneous Controls Mouse, IR Remote, Front Key, SMS, EMS, IE Firmware upgrade Via USB Power Consumption 50W Operation Temperature 0 ~40 Dimension / Weight 350( W)*180(D)*82(H)/3.
93 Appendix 1: Time Zone Chart Standard Time Time Zone GMT+00:00 Standard European DST GMT+01:00 Standard European DST N a m i b i a D S T GMT+02:00 Standard I s r a e l D S T European DST Lebanon.
WEEE Symbol Information Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countri es with separate collection .
1 <Memo>.
Een belangrijk punt na aankoop van elk apparaat Genie GDVRH-616 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Genie GDVRH-616 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Genie GDVRH-616 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Genie GDVRH-616 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Genie GDVRH-616 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Genie GDVRH-616 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Genie GDVRH-616 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Genie GDVRH-616 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
