Gebruiksaanwijzing /service van het product GA-B85N Phoenix van de fabrikant Gigabyte
Ga naar pagina of 36
GA-B85N Phoenix User's Manual Rev . 1 101 12ME-B85NPHX-1 101R.
Copyright © 2014 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 3 - T able of Contents GA-B85N Phoenix Motherboard Layout .......................................................................... 4 GA-B85N Phoenix Motherboard Block Diagram ............................................................. 5 Chapter 1 Hardware Installation .
- 4 - GA-B85N Phoenix Motherboard Layout The box contents above are for reference only and the actual items shall depend on the product package you obtain.
- 5 - GA-B85N Phoenix Motherboard Block Diagram PS/2 KB/Mouse LGA1 150 CPU Intel ® B85 PCIe CLK (100 MHz) CPU CLK+/- (100 MHz) 1 PCI Express x16 Dual BIOS COM 4 USB 3.
- 6 - Chapter 1 Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
- 7 - 1-2 ProductSpecications CPU Support for Intel ® Core ™ i7 processors/Intel ® Core ™ i5 processors/ Intel ® Core ™ i3 processors/Intel ® Pentium ® processors/ Intel ® Celeron ® processors in the LGA1 150 package (Go to GIGABYTE's website for the latest CPU support list.
- 8 - Internal Connectors 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 3.0/2.0 header 1 x USB 2.
- 9 - Operating System Support for Windows 8.1/8/7 Form Factor Mini-ITX Form Factor; 17.0cm x 17.0cm * GIGABYTE reserves the right to make any changes to the product specications and product-related information without prior notice.
- 10 - USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard/mouse, USB printer , USB ash drive and etc. PS/2 Keyboard/Mouse Port Use this port to connect a PS/2 mouse or keyboard.
- 1 1 - RJ-45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs. After installing the HDMI device, make sure to set the default sound playback device to HDMI.
- 12 - 1-8 Internal Connectors 1) AT X _ 12 V 2) AT X 3) C P U _ FA N 4) SY S _ FA N 5) B AT 6) S ATA 3 0 / 1 / 2 7) S ATA 2 8) F_ PA N E L 9) F_ A U D I O 10) S P D I F_ O 11) F _USB30 12) F_ U S B 1.
- 13 - 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector , the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, rst make sure the power supply is turned off and all devices are properly installed.
- 14 - 6) SA T A3 0/1/2 (SA T A 6Gb/s Connectors) The SA T A connectors conform to SA T A 6Gb/s standard and are compatible with SA T A 3Gb/s and SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. 7) SA T A2 (SA T A 3Gb/s Connector) The SA T A connector conforms to SA T A 3Gb/s standard and are compatible with SA T A 1.
- 15 - 8) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, and system status indicator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables. • PW (Power Switch, Red): Connects to the power switch on the chassis front panel.
- 16 - 12) F_USB (USB 2.0/1.1 Header) The header conforms to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . Pin No. Denition Pin No.
- 17 - 14) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults. T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
- 18 - 2-1 Startup Screen The following startup Logo screen will appear when the computer boots. (Sample BIOS V ersion: F1a) Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations.
- 19 - ` M.I.T . Current Status This screen provides information on CPU/memory frequencies/parameters. ` Advanced Frequency Settings & Processor Graphics Clock Allows you to set the onboard graphics clock. The adjustable range is from 400 MHz to 4000 MHz.
- 20 - & Hyper-Threading T echnology (Note 1) Allows you to determine whether to enable multi-threading technology when using an Intel ® CPU that supports this function. This feature only works for operating systems that support multi-processor mode.
- 21 - ` PC Health Status & Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled Clears the record of previous chassis intrusion status and the Case Open eld will show "No" at next boot.
- 22 - & CPU Vcore/CPU VRIN/Dram V oltage/+3.3V/+5V/+12V/CPU V AXG Displays the current system voltages. & CPU/System T emperature Displays current CPU/system temperature.
- 23 - 2-3 System Information This section provides information on your motherboard model and BIOS version. Y ou can also select the default language used by the BIOS and manually set the system time. & System Language Selects the default language used by the BIOS.
- 24 - 2-4 BIOS Features & Boot Option Priorities Species the overall boot order from the available devices. For example, you can set hard drive as the rst priority ( Boot Option #1 ) and DVD ROM drive as the second priority ( Boot Option #2 ).
- 25 - & Fast Boot Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup speed. (Default: Disabled) & VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only.
- 26 - & CSM Support Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process. Always Enables UEFI CSM. (Default) Never Disables UEFI CSM and supports UEFI BIOS boot process only . This item is congurable only when Windows 8 Features is set to Windows 8 or Windows 8 WHQL .
- 27 - & Initial Display Output Species the rst initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGFX Sets the onboard graphics as the rst display . PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the rst display .
- 28 - & Audio Controller Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled . & USB DAC Power Enables or disables the power for the USB DAC connector on the back panel.
- 29 - & External SA T A Enables or disables support for external SA T A devices. (Default: Disabled) ` SuperIOConguration This section provides information on the super I/O chip and allows you to congure the serial port. & Serial Port A Enables or disables the onboard serial port.
- 30 - & Soft-Off by PWR-BTTN Congures the way to turn off the computer in MS-DOS mode using the power button. Instant-Off Press the power button and then the system will be turned off instantly . (Default) Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system.
- 31 - & Save & Exit Setup Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Exit Without Saving Press <Enter> on this item and select Ye s .
- 32 - Chapter 3 Appendix • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive.
- 33 - Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 34 - FCC Not ic e (U.S. A . Onl y) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 35 -.
- 36 - Contact Us GIGA-BYTE TECHNOLOGY CO., L TD. Add re ss: N o.6 , Ba o Chi ang R oad , Hs in -Tien D is t., N ew Taipei C it y 231, Taiwan TEL: + 88 6 -2- 8912- 4 0 00 , FAX : +8 8 6 -2- 8 912- 40 0 5 T e ch . and N on -T e ch . Sup po r t (Sa le s/ M ar keti ng) : ht tp: //gg ts.
Een belangrijk punt na aankoop van elk apparaat Gigabyte GA-B85N Phoenix (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gigabyte GA-B85N Phoenix heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gigabyte GA-B85N Phoenix vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gigabyte GA-B85N Phoenix leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gigabyte GA-B85N Phoenix krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gigabyte GA-B85N Phoenix bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gigabyte GA-B85N Phoenix kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gigabyte GA-B85N Phoenix . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
