Gebruiksaanwijzing /service van het product GA-F2A88XM-HD3 van de fabrikant Gigabyte
Ga naar pagina of 36
GA-F2A88XM-HD3 User's Manual Rev . 30 01 1 2ME -F288HD3-300 1R.
Motherboard GA-F2A88XM-HD3 Aug. 23, 2013 Aug. 23, 2013 Motherboard GA-F2A88XM-HD3 Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 3 - T able of Contents GA -F2 A88XM - HD3 Mot herboard L ay out ........................................................................ 4 GA -F2 A88XM - HD3 Mot herboard B lock Diagr am ........................................................... 5 Chapter 1 Hardware Inst allation .
- 4 - GA-F2A88XM- HD3 Mo therboard Lay out The box contents above are for reference only and the actual items shall depend on the product package you obtain.
- 5 - For detailed product information/limitation(s), refer to "1-2 Product Specications." GA- F2A88 XM - HD 3 Mot herboard Block Diagram UMI PCI Bus 1 PCI PCI CLK (33 MHz) COM LPC Bus PS/2 KB/Mouse Dual BIOS 8 USB 2.
- 6 - Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
- 7 - 1- 2 P roductSpe cications APU FM2+ Socket: - AMD A series processors - AMD Athlon ™ series processors ( Go to GIGABYTE's website for the latest CPU support list.
- 8 - Storage Interface Chipset: 8 x SA T A 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD USB Chipset: - 4 USB 3.0/2.0 ports ( 2 ports on the back panel, 2 ports available through the internal USB header ) - 8 USB 2.
- 9 - 1-3 Installing the APU Read the following guidelines before you begin to install the APU: • Make sure that the motherboard supports the APU. (Go to GIGABYTE's website for the latest APU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the APU to prevent hardware damage.
- 10 - 1- 4 Installing the Memor y DualChannelMemoryConguration This motherboard provides two DDR3 memory sockets and supports Dual Channel T echnology. After the memory is installed, the BIOS will automatically detect the specications and capacity of the memory .
- 1 1 - 1- 7 Back Panel Con nec tors USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard/mouse, USB printer , USB ash drive and etc. PS/2 Keyboard/Mouse Port Use this port to connect a PS/2 mouse or keyboard.
- 12 - RJ-45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs. USB 3.0/2.0 Port The USB 3.0 port supports the USB 3.0 specication and is compatible to the USB 2.
- 13 - 1-8 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer .
- 14 - 1/2) A TX_12V/A TX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector , the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector , rst make sure the power supply is turned off and all devices are properly installed.
- 15 - 5) SA T A3 0/1/2/3/4/5/6/7 (SA T A 6Gb/s Connectors) The SA T A connectors conform to SA T A 6Gb/s standard and are compatible with SA T A 3Gb/s and SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. The AMD A88X Chipset supports RAID 0, RAID 1, RAID 5, RAID 10, and JBOD.
- 16 - 7) F_AUDIO(FrontPanel AudioHeader) The front panel audio header supports Intel High Denition audio (HD) and AC'97 audio. Y ou may connect your chassis front panel audio module to this header . Make sure the wire assignments of the module con - nector match the pin assignments of the motherboard header .
- 17 - 10) F_USB1/F_USB2 (USB 2.0/1.1 Headers) The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . Pin No.
- 18 - 15) CLR_CMOS(ClearCMOSJumper) Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults. T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. • Always turn off your computer before clearing the CMOS values.
- 19 - Chapter2 BIOSSetup • Because BIOS ashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not ash the BIOS. T o ash the BIOS, do it with caution. Inadequate BIOS ashing may result in system malfunction.
- 20 - 2- 2 M.I. T . Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components.
- 21 - & ExtremeMemoryProle(X.M.P .) (Note 2) Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. Disabled Disables this function. (Default) Prole1 Uses Prole 1 settings.
- 22 - ` Channel A/B Timing Settings This sub-menu provides memory timing settings for each channel of memory . The respective timing setting screens are congurable only when DRAM Timing Selectable is set to Quick or Expert . Note: Y our system may become unstable or fail to boot after you make changes on the memory timings.
- 23 - & Slope PWM Allows you to control the fan speed. This item is congurable only when CPU Fan Speed Control is set to Manual . Options are: 0.75 PWM value / o C ~ 2.50 PWM value / o C. & System Fan Speed Control (SYS_F AN Connector) Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
- 24 - & Access Level Displays the current access level depending on the type of password protection used. (If no password is set, the default will display as Administrator .) The Administrator level allows you to make changes to all BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.
- 25 - & SecurityOption Species whether a password is required every time the system boots, or only when you enter BIOS Setup. After conguring this item, set the password(s) under the Administrator Password/User Password item. Setup A password is only required for entering the BIOS Setup program.
- 26 - & Administrator Password Allows you to congure an administrator password. Press <Enter> on this item, type the password, and then press <Enter>. Y ou will be requested to conrm the password. Type the password again and press <Enter>.
- 27 - & OnChipSA T APort4-7T ype(SA T A34~SA T A37connectors) This option is congurable only when OnChip SA T A T ype is set to RAID or AHCI . Congures the operating mode of the integrated SA T A3 4~SAT A3 5 connectors.
- 28 - ` A T A Port Information This section provides information on the device connected to each SA T A port controlled by AMD Chipset. ` SA T A Conguration & PORT0HotPlug~PORT7HotPlug Enables or disable the hot plug capability for each SA T A port.
- 29 - & Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specic time on each day or on a specic day in a month.
- 30 - & Save & Exit Setup Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Exit Without Saving Press <Enter> on this item and select Ye s .
- 31 - Before you begin • At least two SA T A hard drives (to ensure optimal performance, it is recommended that you use two hard drives with identical model and capacity). If you do not want to create RAID, you may prepare only one hard drive. • Windows 8/7/XP (32-bit) setup disk.
- 32 - Example1:CreateaRAID0arraywithDrive0andDrive1andthearraysizeis40GB. rcadm -C -r0 -d 0 1 -s 40000 ( "C" = Create a array , &.
- 33 - InstallingtheSA T A RAID/AHCIDriverandOperatingSystem With the correct BIOS settings, you are ready to install the operating system. A. Installing Windows 8/7 (The following instructions use Windows 8 as the example operating system.
- 34 - 3 - 2 Drivers Installation • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive.
- 35 - Regulator y Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 36 - Conta ct Us GIGA-BYTETECHNOLOGYCO.,L TD. Add res s: No.6, B ao Chi ang Ro ad, Hsi n-Tie n Dist ., New Taipei C ity 2 31 , Taiwan TEL: + 88 6-2- 8912- 40 00 , F A X: +8 86 -2- 8912- 40 05 T ec h. and N on - Tech. Su ppor t (Sa les /Ma rket ing) : htt p://ggt s.
Een belangrijk punt na aankoop van elk apparaat Gigabyte GA-F2A88XM-HD3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gigabyte GA-F2A88XM-HD3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gigabyte GA-F2A88XM-HD3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gigabyte GA-F2A88XM-HD3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gigabyte GA-F2A88XM-HD3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gigabyte GA-F2A88XM-HD3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gigabyte GA-F2A88XM-HD3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gigabyte GA-F2A88XM-HD3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
