Gebruiksaanwijzing /service van het product GA-H55-UD3H van de fabrikant Gigabyte
Ga naar pagina of 96
GA-H55-UD3H LGA1 156 socket motherboard for Intel ® Core ™ i7 processor family/ Intel ® Core ™ i5 processor family/ Intel ® Core ™ i3 processor family User's Manual Rev .
Motherboard GA-H55-UD3H Dec. 1 1, 2009 Dec. 1 1, 2009 Motherboard GA-H55-UD3H.
Copyright © 2009 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 4 - T able of Contents Box Contents ................................................................................................................... 6 Optional Items ................................................................................
- 5 - Chapter 3 Drivers Installation ........................................................................................ 59 3-1 Installing Chipset Drivers ............................................................................... 59 3-2 Application Software .
- 6 - Box Contents GA-H55-UD3H motherboard Motherboard driver disk User's Manual Quick Installation Guide One IDE cable T wo SA T A 3Gb/s cables I/O Shield Optional Items Floppy disk drive cable (Part No. 12CF1-1FD001-7*R) 2-port USB 2.0 bracket (Part No.
- 7 - GA-H55-UD3H Motherboard Layout KB_USB CPU_F AN A TX_12V A TX CD_IN F_AUDIO AUDIO B_BIOS PCIEX4 PCIEX1 IDE SPDIF_I DDR3_1 DDR3_3 DDR3_2 DDR3_4 BA T F_P ANEL F_USB2 COMA IT8720 Intel ® H55 SA T A.
- 8 - Block Diagram (Note) Y ou can use only one of the onboard digital graphics ports (e.g. HDMI and DVI-D) for output when in the BIOS Setup program or when during the POST screens.
- 9 - Hardware Installation 1- 1 Installation Pr ecautions Th e mo the rb oar d co nt ain s nu me rou s de li ca te e lec tr oni c ci rc uit s an d co mp one nt s wh ic h ca n become damaged as a result of electrostatic discharge (ESD).
Hardware Installation - 10 - 1- 2 Product Specications CPU Support for an Intel ® Core ™ i7 series processor/Intel ® Core ™ i5 series processor/ Intel ® Core ™ i3 series processor in the LGA1 156 package (Go to GIGABYTE's website for the latest CPU support list.
- 1 1 - Hardware Installation USB Chipset: - Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers) Internal 1 x 24-pin A TX main power .
Hardware Installation - 12 - BIOS 2x64Mbitash Use of licensed A WARD BIOS Support for DualBIOS ™ PnP 1.0a, DMI 2.0, SM BIOS 2.
- 13 - Hardware Installation 1-3 Installing the CPU and C PU Cooler 1-3 -1 I nsta lling t he CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU.
Hardware Installation - 14 - Step 1: Gently press the CPU socket lever handle down and away from the socket with your nger . Then completely lift the CPU socket lever and the metal load plate will be lifted as well. Step 3: HoldtheCPUwithyourthumbandindexngers.
- 15 - Hardware Installation 1-3 -2 I nsta lling t he CPU Coo ler Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel ® boxed cooler as the example cooler .) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed CPU.
Hardware Installation - 16 - 1- 4 -1 Du al Chann el Me mor y Cong urat ion This motherboard provides four DDR3 memory socket s and support s Dual Chann el T echnology. After the memory is installed, the BIOS will automatically detect the specications and capacity of the memory .
- 17 - Hardware Installation 1- 4 -2 In sta lling a M emo r y Notch DDR3 DIMM Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs.
Hardware Installation - 18 - 1-5 Installing an Expansion Card Follow the steps below to correctly install your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
- 19 - Hardware Installation 1-6 Back Panel Connectors USB 2.0/1.1 Port TheUSBport supportstheUSB 2.0/1.1specication.Use thisportfor USBdevicessuchas aUSBkey - board/mouse,USBprinter ,USBashdriveandetc.
Hardware Installation - 20 - Center/Subwoofer Speaker Out Jack (Orange) Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration. Rear Speaker Out Jack (Black) Usethisaudiojacktoconnectrearspeakersina7.
- 21 - Hardware Installation 1- 7 Inter nal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Befor e i nstal ling th e de vice s, b e s ure to tur n off th e de vices a nd y our com puter.
Hardware Installation - 22 - G.QBOFM 13 1 24 12 A TX A TX: PinNo. Denition 13 3.3V 14 -12V 15 GND 16 PS_ON (soft On/Off) 17 GND 18 GND 19 GND 20 -5V 21 +5V 22 +5V 23 +5V (Only for 2x12-pi n A TX) 24 GND ( On ly for 2x 12- pi n A TX) PinNo.
- 23 - Hardware Installation 3/4/5) CPU_F AN/SYS_F AN1/SYS_FAN2/PWR_F AN (Fan Headers) The motherboard has a 4-pin CPU fan header (CPU_FAN), a 4-pin (SYS_FAN2) and two 3-pin (SYS_ F AN1) system fan headers, and a 3-pin power fan header (PWR_FAN). Most fan headers possess a foolproof insertion design.
Hardware Installation - 24 - 7) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attach- ing the IDE cable, locate the foolproof groove on the connector.
- 25 - Hardware Installation 9) F_P ANEL (Front Panel Header) Conne ct the power sw itch, res et switc h, s peake r , ch assis in trusio n s witch/ senso r an d s ystem sta tus indicator on the chassis to this header according to the pin assignments below.
Hardware Installation - 26 - 10) F_AUDIO (Front Panel Audio Header) ThefrontpanelaudioheadersupportsIn telHighDenitionaudio(HD)andAC'97audio. Y oumayconnect your chassis front panel audio module to this header.
- 27 - Hardware Installation 12) SPDIF_I (S/PDIF In Header) This header supports digital S/PDIF In and can connect to an audio device that supports digital audio out via an optional S/PDIF In cable. For purchasing the optional S/PDIF In cable, please contact the local dealer .
Hardware Installation - 28 - 14) F_USB1/F_USB2 (USB Headers) Theheaders conform to USB2.0/1.1 specication. Each USBheader can providetwo USB ports viaan optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
- 29 - Hardware Installation 16) BA T (BA TTER Y) Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,and timeinformation) in the CMOS when the computer is turned off.
Hardware Installation - 30 - 18) PHASE LED The nu mber of li ght ed LEDs in dica tes th e CP U l oad ing. The hi gher th e C PU loa ding , t he more th e numberoflightedLEDs.T oenable thePhaseLEDdisplay function,pleaserst enableDynamicEnergy Saver ™ 2.
- 31 - BIOS Setup BIOS (Basic In put and Output Sys tem) records ha rdware param eters of the syste m in the CMO S on th e motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving syste m par ameters and loadin g ope rating system , etc .
BIOS Setup - 32 - 2-1 Startup Screen The following screens may appear when the computer boots. A. The LOGO Screen (Default) B. The POST Screen Function Keys: <T AB>: POST SCREEN Press the <T ab> key to show the BIOS POST screen.
- 33 - BIOS Setup 2-2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use ar- row keys to move among the items and press <Enter> to accept or enter a sub-menu.
BIOS Setup - 34 - The Functions of the <F1 1> and <F12> keys (For the Main Menu Only) F1 1: Save CMOS to BIOS This function allows you to save the current BIOS settings to a prole.
- 35 - BIOS Setup 2-3 MB Intelligent T weaker(M.I.T .) Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations.
BIOS Setup - 36 - CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. CPU Frequency Displays the current operating CPU frequency . (Note) This item is present only if you install a CPU that supports this feature.
- 37 - BIOS Setup (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. C3/C6/C7 State Support (Note) Allows you to determine whether to let the CPU enter C3/C6/C7 mode in system halt state.
BIOS Setup - 38 - (Note) This item appears only if you install a memory module that supports this feature. Extreme Memory Prole (X.M.P .) (Note) Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled.
- 39 - BIOS Setup CMOS Setup Utility-Copyright (C) 1984-2009 A ward Software Advanced Memory Settings higf : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: Exit F1: General Help F5: Previous V alues F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level ExtremeMemoryProle(X.
BIOS Setup - 40 - CMOS Setup Utility-Copyright (C) 1984-2009 A ward Software Channel A T iming Settings higf : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: Exit F1: General Help F5: Previous V .
- 41 - BIOS Setup t FAW Options are: Auto (default), 1~63. Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B Misc T iming Control Static tRD Options are: Auto (default), 1~31. Advanced V oltage Settings >>> CPU Load-Line Calibration Ena bl es or di sa ble s Loa d- Lin e C al ibr at ion .
BIOS Setup - 42 - >>> DRAM DRAM V oltage The default is Auto . DRAM T ermination The default is Auto . Ch-A Data VRef. The default is Auto . Ch-B Data VRef. The default is Auto . Ch-A Address VRef. The default is Auto . Ch-B Address VRef. The default is Auto .
- 43 - BIOS Setup This section provides information on the BIOS version, CPU base clock, CPU frequency , memory frequency , total memory size , CPU temperature, Chipset temperature, Vcore, and memory voltage. CMOS Setup Utility-Copyright (C) 1984-2009 A ward Software MB Intelligent T weaker(M.
BIOS Setup - 44 - Date (mm:dd:yy) Setsthesystemdate.Thedateformatisweek(re ad-only),month,dateandyear .Selectthedesiredeld and use the up arrow or down arrow key to set the date. Time (hh:mm:ss) Sets the system time.
- 45 - BIOS Setup The following elds display your harddrive specications. If you wish to enter the parameters manually , refer to the information on the hard drive. Capacity Approximate capacity of the currently installed hard drive.
BIOS Setup - 46 - (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website.
- 47 - BIOS Setup HDD S.M.A.R.T . Capability Enables or disables the S.M.A.R.T . (Self Monitoring and Reporting T echnology) capability of your hard drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed.
BIOS Setup - 48 - 2-6 Integrated Peripherals SA T A AHCI Mode (Intel H55 Chipset) AllowsyoutodecidewhethertoconguretheSA T AcontrollerintegratedintheIntelH55Chipsetto AHCI mode. IDE CongurestheSA T A controllertoIDEmode.
- 49 - BIOS Setup Onboard H/W LAN Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled .
BIOS Setup - 50 - Onboard LAN Boot ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) Onboard IDE Controller (iTE IT8213 Chip) Enables or disables the IDE controller integrated in the iTE IT8213 chip.
- 51 - BIOS Setup ACPI Suspend T ype Speciesthe ACPIsleepstatewhenthesystementerssuspend. S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep state, the system appears suspended and stays in a low power mode.
BIOS Setup - 52 - (Note) Supported on Windows 7/Vista operating system only . Date (of Month)Alarm: T urn on the system at a specic time on each day or on a specic day in a month.
- 53 - BIOS Setup Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened eldwillshow"No"atnextboot.
BIOS Setup - 54 - CPU Smart F AN Mode Specieshowtocontrol CPUfanspeed.Thisitemiscongurable onlyif CPU Smart F AN Control is set to Enabled . Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU fan control mode.
- 55 - BIOS Setup Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard.
BIOS Setup - 56 - Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. Y ou will berequestedtoconrmthepassword.
- 57 - BIOS Setup Press <Enter> on this item and press the <Y> key . This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu. 2-12 Save & Exit Setup Press <Enter> on this item and press the <Y> key .
BIOS Setup - 58 -.
- 59 - Drivers Installation 3-1 Installing Chipset Drivers Chapter 3 Drivers Installation • Beforeinstallingthedrivers,rstinstalltheoperatingsystem. • After installing the operating system, insert the motherboard driver disk into your optical drive.
Drivers Installation - 60 - 3-2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software.
- 61 - Drivers Installation 3-4 Contact For the detailedcontact information of the GIGABYTE T aiwan headquarter or worldwidebranch ofces, click the URL on this page to link to the GIGABYTE website. 3-5 System This page provides the basic system information.
Drivers Installation - 62 - 3-6 Download Center T o upd ate the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE website.
- 63 - Unique Features 4-1 Xpress Recovery2 Chapter 4 Unique Features Xp re s s R e co ve r y2 i s a u ti l it y th at a ll o ws y ou t o q u ic kl y co m pr es s an d back up your system data and perform restoration of it.
Unique Features - 64 - Step 3: Wh en p ar t it io ni n g y ou r ha r d d ri v e, ma k e s u re to leave unallocated space (10 GB or more is recom- mended; actual size requirements vary , depending on the amount of data) and begin the installation of the operating system.
- 65 - Unique Features D. Using the Restore Function in Xpress Recovery2 E. Removing the Backup F . Exiting Xpress Recovery2 Sel ec t RESTORE t o res to re th e b ack up to y our h ard d riv e i n case the system breaks down. The RESTORE option will not be present if no backup is created before.
Unique Features - 66 - 4-2 BIOS Update Utilities GI GA BY T E m ot he r bo ar ds p ro vi de t wo u ni qu e BI OS u pd at e to ol s, Q -F la sh ™ a n d @ BI OS ™ . G I GA BY TE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mod e.
- 67 - Unique Features B. Updating the BIOS When updating the BIOS, choose the locati on whe re the BIOS le is saved . The following proce dure as - sumesthatyousavetheBIOSletoaoppydisk.
Unique Features - 68 - Step 4: Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see the new BIOS version is present on the POST screen. Step 5: During the POST , press <Delete> to enter BIOS Setup.
- 69 - Unique Features 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows, close all applications and TSR (T erminate and Stay Resident) programs.
Unique Features - 70 - 4-3 EasyT une 6 GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment.
- 71 - Unique Features 4-4 Dynamic Energy Saver ™ 2 GIGABYTE Dynamic Energy Saver ™ 2 (Note 1) is a revolutionary technology that delivers unparalleled power savings with a click of the button.
Unique Features - 72 - B. T otal Mode In T otal Mode, users are able to see how much total power savings they have accumulated in a set period of time since activating Dynamic Energy Saver ™ 2 for th ersttime (Note 3) .
- 73 - Unique Features 4-5 Q-Share Q-Share is an easy and convenient data sharing too l. After conguring your LAN connection settings and Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources.
Unique Features - 74 - 4-6 Smart 6 ™ GIGABYTE Smart 6 ™ (Note 1) is designed with user-friendliness i n mind, and offers a comb ination of 6 innovative software utilities that provide easier and smarter PC system management.
- 75 - Unique Features SMART Recovery With SMART Recovery, users can quickly create backups of changed data les (Note 2) or copy les from a specic backup on P A T A and SA T Ahard drives (partitioned on NTFS le system) in Windows Vista.
Unique Features - 76 - (Note 1) When launching Smart 6 ™ forthersttime,thesystemwillrequestyoutosetupapassword.Thispasswordisrequiredwhen you activate SMART DualBIOS or when you want to make changes to the SMAR T Recorder or SMART TimeLock settings.
- 77 - Unique Features 4-7 Auto Green Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings via a Bluetooth cell phone. When the phone is out of the range of the computer's Bluetooth receiver , the sys- temwillenterthespeciedpowersavingmode.
Unique Features - 78 -.
- 79 - Appendix 5-1-1 Conguring 2/4/5.1/7.1-Channel Audio The motherboard provides six audio jacks on the back pan el wh ich s upp ort 2 /4/ 5.1 /7.
Appendix - 80 - Step 2: Connect an audio device to an audio jack. The The cur- rent connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK . Step 3: On the Speakers s creen, cli ck the Speak er C ongur a - tion tab.
- 81 - Appendix 5-1-2 Conguring S/PDIF In/Out A. S/PDIF In The S/PDIF In cable (optional) allows you to input digital audio signals to the computer for audio processing. 1. Installing the S/PDIF In Cable: 2. Conguring S/PDIF In: On the Digital Input screen, click the Default Format tab to select the default format.
Appendix - 82 - B. S/PDIF Out The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality . 1. Connecting a S/PDIF Out Cable: 2. Conguring S/PDIF Out: On the Digital Output screen, click the Default Format tab and then select the sample rate and bit depth.
- 83 - Appendix 5-1-3 Conguring Microphone Recording Step 1: After installing the audio driver , the HD Audio Manager icon willappearinthe noticationarea.
Appendix - 84 - Step 5: After comp leting the sett ings above, cli ck Start , point to All Programs , point to Accessories , and then click Sound Recorder to begin the sound recording. Step 1: Locate the V olume icon in the notication area and right-click on this icon.
- 85 - Appendix Step 3: When the Stereo Mix item appears, right-click on this item and select Enable . Then set it as the default de- vice. Step 4: Now you can access the HD Audio Manager tocong - ure Stereo Mix and use Sound Recorder to record the sound.
Appendix - 86 - 5-2 T roubleshooting 5-2-1 Frequently Asked Questions T o read more F AQs for your motherboard, please go to the Support&DownloadsMotherboardFAQ page on GIGABYTE's website. Q: In the BIOS Setup program, why are some BIOS options missing? A: Some advanced options are hidden in the BIOS Setup program.
- 87 - Appendix 5-2-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn off the power . Remove all peripherals, connecting cables, and power cord etc.
Appendix - 88 - If the pro cedur e a bove is una ble to solv e y our prob lem, co ntact th e p lace of pur chase or lo cal dealer for help. Or go to the Support&DownloadsT echnical Service Zone page to submit your question. Our customer service staff will reply you as soon as possible.
- 89 - Appendix 5-3 Regulatory Statements Regulatory Notices This document m ust not be copied without our written permission, and the cont ents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
Appendix - 90 - Finally , we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delive red in, and by disposing of or recycling used batteries properly .
- 91 - Appendix.
Appendix - 92 -.
- 93 - Appendix.
Appendix - 94 -.
- 95 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4000 F AX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .
Appendix - 96 - • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEB address : http://www .gigabyte.de • G.B.T . TECH. CO., L TD. - U.K. WEB address : http://www .giga-byte.co.uk • Giga-Byte T echnology B.V . - The Netherlands WEB address : http://www .
Een belangrijk punt na aankoop van elk apparaat Gigabyte GA-H55-UD3H (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gigabyte GA-H55-UD3H heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gigabyte GA-H55-UD3H vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gigabyte GA-H55-UD3H leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gigabyte GA-H55-UD3H krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gigabyte GA-H55-UD3H bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gigabyte GA-H55-UD3H kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gigabyte GA-H55-UD3H . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
