Gebruiksaanwijzing /service van het product GA-H61M-USB3-B3 van de fabrikant Gigabyte
Ga naar pagina of 40
GA-H61M-USB3-B3 LGA1 155 socket motherboard for Intel ® Core ™ i7 processor family/ Intel ® Core ™ i5 processor family/Intel ® Core ™ i3 processor family/ Intel ® Pentium ® processors/Intel ® Celeron ® processors User's Manual Rev .
Motherboard GA-H61M-USB3-B3 Feb. 25, 201 1 Feb. 25, 201 1 Motherboard GA-H61M-USB3-B3.
Copyright © 201 1 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 4 - T able of Contents GA-H61M-USB3-B3 Motherboard Layout ....................................................................... 5 Chapter 1 Hardware Installation .....................................................................................
- 5 - GA-H61M-USB3-B3 Motherboard Layout Box Contents GA-H61M-USB3-B3 motherboard Motherboard driver disk User's Manual T wo SA T A cables I/O Shield The box contents above are for reference only and the actual items shall depend on the product package you obtain.
- 6 - Hardware Installation 1- 1 Installation Precautions Th e mo the rbo ard con tai ns num erou s d eli cat e e lec tron ic cir cui ts and com pon ents wh ich ca n become damaged as a result of electrostatic discharge (ESD).
- 7 - Hardware Installation 1- 2 ProductSpecications CPU Support for an Intel ® Core ™ i7 series processor/Intel ® Core ™ i5 series processor/ Intel ® Core ™ i3 series processor/.
- 8 - Hardware Installation Back Panel Connectors 1 x PS/ 2 keyboar d por t 1 x PS/ 2 mous e por t 1 x D-Sub port 1 x DVI -D port 4 x USB 2.
- 9 - Hardware Installation 1-3 Installing the CPU and C PU C ooler Installing the CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
- 10 - Hardware Installation DualChannelMemoryConguration This motherboard provides t wo DDR3 memory so ckets and supports Dual Chan nel T echnology. After t he memory is installed, the BIOS will automatically detect the specications and capacity of the memory .
- 1 1 - Hardware Installation 1-6 Back Panel Con nector s PS/2 Keyboard and PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 key- board. D-Sub Port The D-Sub port supports a 15-pin D-Sub connector.
- 12 - Hardware Installation 1- 7 Internal Connec tors Read the following guidelines before connecting external devices: First make sure your devices are compliant with the connectors you wish to connect. • Befor e ins talling the d evices , be sure to turn off the devices and y our c omputer.
- 13 - Hardware Installation DEBUG PO RT G.QBOFM 13 1 24 12 A TX A TX: 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) W ith the use of th e po wer conn ect or, the pow er s uppl y ca n su ppl y en ough sta ble powe r to all the components on the motherboard.
- 14 - Hardware Installation 3/4) CPU_F AN/SYS_F AN (Fan Headers) The motherboard has a 4-pin CPU fan header (CPU_F AN) and a 4-pin system fan header (SYS_F AN). Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire).
- 15 - Hardware Installation 6) F_P ANEL (Front Panel Header) C onnect the po wer swi tch, r eset sw itch, speaker, chass is int rusion switch/s ensor and sys tem sta tus indicator on the chassis to this header according to the pin assignments below .
- 16 - Hardware Installation 8) F_USB1/F_USB2 (USB Headers) The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
- 17 - Hardware Installation 9) LPT (Parallel Port Header) The LPT header can provide one parallel port via an optional LPT port cable. For purchasing the optional LPT port cable, please contact the local dealer . DEBUG PO RT G.QBOFM 1 2 26 25 Pin No.
- 18 - Hardware Installation 1 1) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS congurations) and reset the CMOS values to factory defaults.
- 19 - BIOS Setup T o access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on. T o see more advanced BIOS Setup menu options, you can press <Ctrl> + <F1> in the main menu of the BIOS Setup program.
BIOS Setup - 20 - 2-2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use ar- row keys to move among the items and press <Enter> to accept or enter a sub-menu.
- 21 - BIOS Setup 2-3 MB Intelligent T weaker(M.I.T .) Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in dam - age to CPU, chipset, or memory and reduce the useful life of these components.
BIOS Setup - 22 - Advanced Frequency Settings CMOS Setup Utility-Copyright (C) 1984-2011 A ward Software Advanced Frequency Settings CPU Clock Ratio [30X] CPU Frequency 3.
- 23 - BIOS Setup (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. Core Current Limit (Amps) Allows you to set a current limit for CPU T urbo mode.
BIOS Setup - 24 - Memory Frequency(Mhz) The rst memory frequency value is the normal operating frequency of the memory being used; the sec - ond is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.
- 25 - BIOS Setup >>>>> Channel A/B T iming Settings >>>>> Channel A/B Standard T iming Control CAS Latency Time Options are: Auto (default), 5~15. tRCD Options are: Auto (default), 1~15. tRP Options are: Auto (default), 1~15.
BIOS Setup - 26 - Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B Misc T iming Control IO Latency Options are: Auto (default), 1~31. Round T rip Latency Options are: Auto (default), 1~255. Advanced V oltage Settings >>> CPU Dynamic Vcore(DVID) The default is Auto .
- 27 - BIOS Setup Miscellaneous Settings Isochronous Support Determines wheth er to enable specic streams within the CPU and Chipset. (Default: Enabled) Virtualization T echnology (Note) Enables or disables Intel Virtualization T echnology .
BIOS Setup - 28 - IDE Channel 2, 3 Master Extended IDE Drive Congure your SAT A devices by using one of the two methods below: Auto Lets the BIOS automatically detect SA T A devices during the POST .
- 29 - BIOS Setup (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. CD/DVD Boot Option Set this item to EFI if you want to install the operating system to a hard drive larger than 2.
BIOS Setup - 30 - On-Chip Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con- troller . MS-DOS, for example, will use only this memory for display . Options are:32MB+2MB for GTT~ 480MB+2MB for GTT .
- 31 - BIOS Setup SMART LAN (LAN Cable Diagnostic Function) This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable. This feature will detect cabling issue and report the approximate distance to the fault or short.
BIOS Setup - 32 - ACPI Suspend T ype Species the ACPI sleep state when the system enters suspend. S1(POS) E n a b l e s t h e s y s t e m t o e n t e r t h e A C P I S 1 ( P o w e r o n S u s p e n d ) s l e e p s t a t e . In S1 sleep state, the system appears suspended and stays in a low power mode.
- 33 - BIOS Setup KB Power ON Password Set the password when Power On by Keyboard is set to Password . Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept. T o turn on the system, enter the password and press <Enter>.
BIOS Setup - 34 - Current CPU/SYSTEM F AN Speed (RPM) Displays current C PU/system fan speed. CPU Warning T emperature S et s t he w ar nin g t hre sh old fo r CP U t emp er atu re . Wh en CPU tem pe ra tur e e xce ed s th e t hre sh old , BIOS will emit warnin g sou nd.
- 35 - BIOS Setup Press <Enter> on this item and then press the <Y> key to load the optimal BIOS default settings. The BIOS defaults settings help the system to operate in optimum state. Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values.
BIOS Setup - 36 - Press <Enter> on this item and press the <Y> key . This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu.
- 37 - BIOS Setup Chapter 3 Drivers Installation • Before installing the drivers, rst install the operating system. • After installing the operating system, insert the motherboard driver disk into your optical drive. The driver Autorun screen is automatically displayed which looks like that shown in the screen shot below .
BIOS Setup - 38 -.
- 39 - BIOS Setup.
BIOS Setup - 40 - Contact Us GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000, F AX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.
Een belangrijk punt na aankoop van elk apparaat Gigabyte GA-H61M-USB3-B3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gigabyte GA-H61M-USB3-B3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gigabyte GA-H61M-USB3-B3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gigabyte GA-H61M-USB3-B3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gigabyte GA-H61M-USB3-B3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gigabyte GA-H61M-USB3-B3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gigabyte GA-H61M-USB3-B3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gigabyte GA-H61M-USB3-B3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
