Handleiding Gigabyte GA-H87N-WIFI Motherboard

Samenvatting van de inhoud op de volgende paginas van de handleiding

Pagina 1

GA-Z87N-WIFI GA-H87N-WIFI GA-H87N User's Manual Rev . 1 1 01 1 2 ME- Z87N WIF-1 101 R.
Pagina 2

Wireless Module Country Approvals: Motherboard GA-Z87N-WIFI GA-H87N-WIFI May 20, 2013 See the latest safety and regulatory documents at GIGABYTE's website.
Pagina 3

GA-H87N May 20, 2013 May 20, 2013 Motherboard GA-H87N Motherboard.
Pagina 4

Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Pagina 5

- 5 - T able of Contents Box C onte nts ................................................................................................................... 7 Optional Items ..............................................................................
Pagina 6

- 6 - Chapter 4 Dri vers Installati on ....................................................................................... 73 4-1 Chipset Drivers .............................................................................................. 73 4-2 Applic ation Soft ware .
Pagina 7

- 7 - Bo x Content s 5 GA-Z87N-WIFI, GA-H87N-WIFI, or GA-H87N motherboard 5 Motherboard driver disk 5 Wireless module driver disk jk 5 User's Manual 5 Quick Installation Guide 5 T wo SA T A cables 5 I/O Shield 5 One antenna jk Optional I tems  2-portUSB2.
Pagina 8

- 8 - GA-Z8 7 N -WIF I/GA-H8 7N-WIF I/G A- H8 7N Motherbo ard L ayo u t (Note1) FortheGA-H87N,thewirelesscommunicationmoduleneedstobepurchasedadditionally . (Note2) Thechipislocatedonthebackofthemotherboard.
Pagina 9

- 9 - DVI-I GA-Z8 7 N -WIF I/GA-H8 7N-WIF I/G A- H8 7N M otherbo ard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications." PS/2 KB/Mouse COM LPC Bus LGA1 150 CPU PCI Express Bus CPUCLK+/-(100MHz) PCIe CLK (100MHz) 1 PCI Express x16 x16 DMI 2.
Pagina 10

- 10 -.
Pagina 11

- 1 1 - Hardware Installation Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damagedas aresultof electrostaticdischarge (ESD).
Pagina 12

Hardware Installation - 12 - 1- 2 P roductSpe cications CPU  Support for Intel ® Core ™ i7 processors/Intel ® Core ™ i5 processors/ Intel ® Core ™ i3 processors/Intel ® Pentium ® processors/ Intel ® Celeron ® processors in the LGA1 150 package (GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.
Pagina 13

- 13 - Hardware Installation USB  Chipset:  -  4x USB2.0/1.1ports(2 portsonthe backpanel,2ports availablethrough theinternalUSBheader)  -  6x USB3.
Pagina 14

Hardware Installation - 14 - Unique Features  Support for Q-Flash  SupportforXpressInstall  Support for APP Center  *  AvailableapplicationsinAPPCentermaydifferbymotherboardmodel.
Pagina 15

- 15 - Hardware Installation 1-3 Installing the CPU and C PU Cooler 1-3 -1 Inst all ing t he CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU.
Pagina 16

Hardware Installation - 16 - B. Follow the steps below to correctly install the CPU into the motherboard CPU socket. Step 1: Gently press the CPU socket lever handle down and away from the socket with your nger . Then completely lift the CPU socket lever and the metal load plate/plastic cover will be lifted as well.
Pagina 17

- 17 - Hardware Installation 1-3 -2 Inst all ing t he CPU Cool er Followthesteps belowto correctlyinstallthe CPUcooler onthemotherboard. (Thefollowing procedureuses Intel ® boxedcoolerastheexamplecooler .
Pagina 18

Hardware Installation - 18 - 1- 4 Installing the Memor y DDR3_1 DDR3_2 Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode. 1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.
Pagina 19

- 19 - Hardware Installation 1- 4 -2 I nst all ing a M emo r y Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs.
Pagina 20

Hardware Installation - 20 - 1-5 Installing an Expansion Card Follow the steps below to correctly install your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
Pagina 21

- 21 - Hardware Installation 1-6 Back Panel Connectors USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard/mouse,USBprinter ,USBashdriveandetc.
Pagina 22

Hardware Installation - 22 - DVI-I Port TheDVI-Iport conformstotheDVI-I specicationandsupportsamaximum resolutionof1920x1200(the actualresolutions supported dependon the monitorbeing used).
Pagina 23

- 23 - Hardware Installation • Whenremovingthe cableconnected toaback panelconnector,rstremovethe cablefromyour device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector .
Pagina 24

Hardware Installation - 24 - 1- 7 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer .
Pagina 25

- 25 - Hardware Installation 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components onthe motherboard.
Pagina 26

Hardware Installation - 26 - 3/4) CPU_F AN/SYS_F AN (Fan Headers) All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design. Whenconnecting afan cable,be sureto connectit inthe correctorientation (theblack connectorwire is thegroundwire).
Pagina 27

- 27 - Hardware Installation • A RAID 0orRAID 1conguration requiresatleast twohard drives.Ifmore thantwo harddrives are to be used, the total number of hard drives must be an even number . • A  RAID5 congurationrequires at least threehard drives.
Pagina 28

Hardware Installation - 28 - 8) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, and system status indicator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables.
Pagina 29

- 29 - Hardware Installation 1 9) SPDIF_O (S/PDIF Out Header)  Thisheader supportsdigital S/PDIF Out andconnects a S/PDIF digitalaudio cable (providedby.
Pagina 30

Hardware Installation - 30 - 1 1) F_USB (USB 2.0/1.1 Header)  The header conforms to USB 2.0/1.1 specication. The USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
Pagina 31

- 31 - Hardware Installation 13) CLR_CMOS (Clear CMOS Jumper)  Use this jumper to clear the BIOS conguration andreset the CMOS values to factory defaults.T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
Pagina 32

Hardware Installation - 32 -.
Pagina 33

- 33 - BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard.
Pagina 34

BIOS Setup - 34 - 2-1 Startup Screen The following startup Logo screen will appear when the computer boots. Function Keys: <DEL>: BIOS SETUPQ-FLASH Press the <Delete > key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
Pagina 35

- 35 - BIOS Setup 2-2 The Main Menu A. Dashboard Mode (Default) j Differing from traditional UEFI interface, the Dashboard Mode provides a fancy and user-friendly BIOS environment where users can easily point and click through various settings and make adjustments for optimum performance.
Pagina 36

BIOS Setup - 36 - BIOS Setup Menus  M.I.T .  Usethismenu tocongure theclock, frequency ,and voltagesof yourCPU andmemory ,etc. Orcheck the system/CPU temperatures, voltages, and fan speeds.
Pagina 37

- 37 - BIOS Setup 2-3 M.I.T . Whether the system will work stably with the overclock/overvoltage settings you made is dependent onyouroverallsystem congurations.Incorrectlydoingoverclock/overvoltagemayresultin damage to CPU, chipset, or memory and reduce the useful life of these components.
Pagina 38

BIOS Setup - 38 - ` M.I.T . Current Status This screen provi des information on CPU/memory frequencies/parameters. ` Advanced Frequency Settings & Performance Boost j (Note)  Provides you with ve different overclocking congurations.
Pagina 39

- 39 - BIOS Setup (Note) This item is present only when youinstall a CPU thatsupports this feature.For more information about Intel ® CPUs' unique features, please visit Intel's website.
Pagina 40

BIOS Setup - 40 - & T urbo Power Limit (Watts) Allows you to set a power limit for CPU T urbo mode. When the CPU power consumption exceeds the speciedpowerlimit, theCPUwill automaticallyreducethe corefrequencyin ordertoreducethe power .
Pagina 41

- 41 - BIOS Setup & System Memory Multiplier Allows you to set the system memory multiplier . Auto sets memory multiplier according to memory SPD data.
Pagina 42

BIOS Setup - 42 - & Channel Interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability . Auto lets the BIOS automaticallycongurethissetting.
Pagina 43

- 43 - BIOS Setup ` Advanced V oltage Settings ` CPU Core V oltage Control This section provides CPU voltage control options. ` Chipset V oltage Control This section provides Chipset voltage control options. ` DRAM V oltage Control This section provides memory voltage control options.
Pagina 44

BIOS Setup - 44 - ` PC Health Status & CPU Vcore/CPU VRIN/DRAM V oltage/+3.3V/+5V/+12V/CPU V AXG Displays the curre nt system voltages. & CPU/System T emperature Displays current C PU/system temperature. & CPU/System Fan Speed Displays current C PU/system fan speed.
Pagina 45

- 45 - BIOS Setup ` Miscellaneous Settings & PEGGen3SlotConguration Allows you to set the operation mode of the PCI Express slot to Gen 1, Gen 2, or Gen 3. Actual operation modeis subjectto thehardware specicationofeach slot.
Pagina 46

BIOS Setup - 46 - 2-4 System This section provides information on your CPU, memory , motherboard model, and BIOS version. Y ou can also select the default language used by the BIOS and manually set the system time. & System Language Selects the defau lt language used by the BIOS.
Pagina 47

- 47 - BIOS Setup 2-5 BIOS Features & Boot Option Priorities  Species theoverallbootorder fromtheavailabledevices.Removablestorage devicesthatsupportGPT format will be prexed with "UEFI:" string on the boot device list.
Pagina 48

BIOS Setup - 48 - & Security Option  Speciesw hether a password is required every time the system boots, or only when you enter BIOS Setup. After conguringthis item,set thepassword(s) underthe Administrator Password/User Password item.
Pagina 49

- 49 - BIOS Setup & Intel Virtualization T echnology (Note) Enables or disables Intel ® Virtualization T echnology . Virtualization enhanced by Intel ® Virtualization T echnology will allow a platform to run multiple operating systems and applications in independent partitions.
Pagina 50

BIOS Setup - 50 - & Administrator Password  Allows you to congure an administrator password. Press <Enter> on this item, type the password, and thenpress <Enter>.Y ou willbe requested to conrmthe password.
Pagina 51

- 51 - BIOS Setup 2-6 Peripherals & Init Display First  Species the rst initiation of the monitor displayfrom the installed PCI Express graphics card or the onboard graphics.  IGFX   Setstheonboardgraphicsastherstdisplay .
Pagina 52

BIOS Setup - 52 -  Manual Allows you to determine whether to rout the USB 3.0 ports to the xHCI or EHCI controller before booting to OS, and also provides you with options to manually rout each USB 3.0/2.0 port to xHCI or EHCI. & Audio Controller  Enablesordisabl estheonboardaudiofunction.
Pagina 53

- 53 - BIOS Setup ` SA T AConguration & SA T A Controller(s)  Enablesordisabl estheintegratedSA T Acontrollers.(Default:Enabled) & SA T A Mode Selection .
Pagina 54

BIOS Setup - 54 - & Power Loading Enables or disabl es dummy load. When the power supply is at low load, a self-protection will activate causing it to shutdown or fail. If this occurs, please set to Enabled . Auto lets the BIOS automatically congurethissetting.
Pagina 55

- 55 - BIOS Setup & AC BACK Determines the st ate of the system after the return of power from an AC power loss.  AlwaysOff    Thesystemstaysoffuponthereturnofthe ACpower.(Default)  Always On The system is turned on upon the return of the AC power .
Pagina 56

BIOS Setup - 56 - 2-8 Save & Exit & Save & Exit Setup Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu.
Pagina 57

- 57 - Conguring SA TA Hard Drive(s) Chapter3 ConguringSA T A HardDrive(s) T ocongureSA T Aharddrive(s),followthestepsbelow: A. InstallSA T A harddrive(s)inyourcomputer. B. CongureSA T A controllermodeinBIOSSetup.
Pagina 58

Conguring SA TA Hard Drive(s) - 58 - The BIOS Setup menus described in this section may differ from the exact settings for your motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version.
Pagina 59

- 59 - Conguring SA TA Hard Drive(s) C-1.UEFIRAIDConguration This mode supports Windows 8 64-bit installation only . Step 1: In BIOS Setup, go to BIOS Features and set OS T ype to Windows 8 and CSM Support to Never .(Figure2) Save the changes and exit BIOS Setup.
Pagina 60

Conguring SA TA Hard Drive(s) - 60 - Step 3: On the Intel(R) Rapid Storage T echnology menu, press <Enter> on Create RAID V olume to enter the Create RAID V olume screen. Enteravolumenamewith1~16letters(letterscannotbespecialcharacters)underthe Name  item and press <Enter>.
Pagina 61

- 61 - Conguring SA TA Hard Drive(s) Step 5: After setting the capacity , move to Create V olume andpress<Enter>tobegin.(Figure6) After completing, you'll be brought back to the Intel(R) Rapid Storage T echnology screen.
Pagina 62

Conguring SA TA Hard Drive(s) - 62 - Delete RAID V olume T o delete a RAID array , press <Enter> on the volume to be deleted on the Intel(R) Rapid Storage T echnology screen. After entering the RAID VOLUME INFO screen, press <Enter> on Delete to enter the Delete screen.
Pagina 63

- 63 - Conguring SA TA Hard Drive(s) C-2.ConguringLegacyRAIDROM Enter the Intel ® legacy RAIDBIOS setuputility tocongure aRAID array .Skip thisstep andproceed withthe installationofWindowsoperatingsystemforanon-RAIDconguration.
Pagina 64

Conguring SA TA Hard Drive(s) - 64 - Step 3: After entering the CREA TE VOLUME MENU screen,enteravolumenamewith 1~16letters(letterscannotbe special characters)under the Name  itemand press<Enter>.
Pagina 65

- 65 - Conguring SA TA Hard Drive(s) Step 5: Enter the array capacity and press <Enter>. Finally press <Enter> on the Create V olume item to begin creating the RAID array .
Pagina 66

Conguring SA TA Hard Drive(s) - 66 - Recovery V olume Options Intel ® Rapid Recover T echnology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive.
Pagina 67

- 67 - Conguring SA TA Hard Drive(s) Figure 17 Step 3: Press <Enter> under the Select Disks item. In the SELECT DISKS box, press <T ab> on the hard drive you want to use for themaster drive and press <Space> on the hard driveyou want to use for the recovery drive.
Pagina 68

Conguring SA TA Hard Drive(s) - 68 - Delete RAID V olume T o delete a RAID array , select Delete RAID V olume in MAIN MENU and press <Enter>. In the DELETE VOLUME MENU section, use the up or down arrow key to select the array to be deleted and press <Delete>.
Pagina 69

- 69 - Conguring SA TA Hard Drive(s) 3-2 Installing the SA T A RAID/AHCI Driver and Operating System With the correct BIOS settings, you are ready to install Windows 8/7.
Pagina 70

Conguring SA TA Hard Drive(s) - 70 - B. Rebuilding an Array Rebuilding is the process of restoring data to a hard drive from other drives in the array .
Pagina 71

- 71 - Conguring SA TA Hard Drive(s) • Performing the Rebuild in the Operating System While in the operating system, make sure the chipset driver has been installed from the motherboard driver disk. Then launch the Intel ® Rapid Storage T echnology utility from the desktop.
Pagina 72

Conguring SA TA Hard Drive(s) - 72 - Step 2: Go to the Manage menu of the Intel ® Rapid Storage T echnology utility and click Recover data in Manage V olume . The Status item on the left of the screen displays the rebuild progress. Step 3: Click Ye s to begin the data recovery .
Pagina 73

- 73 - Drivers Installation 4-1 Chipset Drivers Chapter 4 Drivers Installation • Before installing the drivers, rst install the operating system. (The following instructions use Windows8astheexampleoperatingsystem.
Pagina 74

Drivers Installation - 74 - 4-2 Application Software This page displays the apps that GIGABYTE develops and some free software. Y ou can select the apps you want and click the Install icon to begin the installation. 4-3 Information This page provides detailed information on the drivers on the driver disk.
Pagina 75

- 75 - Unique Features 5-1 BIOS Update Utilities GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash ™ and @BIOS ™ . GIGABYTE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mode.
Pagina 76

Unique Features - 76 - B. Updating the BIOS In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the BIOS,choose the location where the BIOS le issaved. The following procedureassumes that you save the BIOSletoaUSBashdrive.
Pagina 77

- 77 - Unique Features Select Ye s to load BIOS defaults Step 4: During the POST , press <Delete> to enter BIOS Setup. Select Load Optimized Defaults on the Save & Exit screen and press <Enter> to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend that you reload BIOS defaults.
Pagina 78

Unique Features - 78 - • Makesurethatthe BIOSletobeashed matchesyourmotherboardmodel. UpdatingtheBIOS withanincorrectBIOSlecouldcauseyoursystemnottoboot.
Pagina 79

- 79 - Unique Features 5-2 APP Center GIGABYTE App Center gives you easy access to a wealth of GIGABYTE apps that help you get the most from your GIGABYTE motherboard (Note) .
Pagina 80

Unique Features - 80 - 5-2-1 EasyT une GIGABYTE's EasyTune is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment.
Pagina 81

- 81 - Unique Features 5-2-2 EZ Setup TheGIGABYTEEZSetup utilityincludesthefollowing 'EZ'setupsapplications thatwilloffergreatlysimplied in.
Pagina 82

Unique Features - 82 - EZ Smart Response A. System Requirements 1. An Intel ® Chipset-based motherboard supporting this feature (Note1) 2. Intel ® Core series processor 3. Intel ® SA TA controller set to RAID mode 4. Intel ® Rapid Storage T echnology utility installed (Note1) 5.
Pagina 83

- 83 - Unique Features EZ Rapid Start A. System Requirements 1. Intel ® Rapid Start T echnology enabled in BIOS Setup 2. AnSSDwithsizelargerthanthetotalsystemmemory 3.
Pagina 84

Unique Features - 84 - EZ Smart Connect A. System Requirements 1. Intel ® Smart Connect T echnology enabled in BIOS Setup 2. Windows 7 with SP1/Windows 8 3. Intel ® Smart Connect T echnology utility installed 4. Properly-working network connection 5.
Pagina 85

- 85 - Unique Features XHD With GIGABYTE XHD (Note 1) , users can quickly congure a RAID-ready system for RAID 0 or RAID 1 when a newSA T A drive isadded.
Pagina 86

Unique Features - 86 - 5 -2- 3 US B Blo cker GIGABYTE USB Blocker provides you with an easy-to-use interface that allows you to block certain USB device types on your PC.
Pagina 87

- 87 - Unique Features 5-3 Intel ® SBA (Small Business Advantage) kl A. System Requirements 1. An Intel ® H87/B85 Chipset motherboard 2. An Intel ® Core series processor 3. Windows 7 with SP1/Windows 8 4. All motherboard drivers correctly installed B.
Pagina 88

Unique Features - 88 - 5-4 Using the Wi-Fi/Bluetooth Utilities jk j Only for GA-Z87N-WIFI. k Only for GA-H87N-WIFI. The Wi-Fi Share utility is supported in Windows 8/7 only .
Pagina 89

- 89 - Unique Features Step 2: When the Wi-Fi Share Settings dialog box appears, select a currently running network connection you want to share from the Share Connection list. Then click Save . The Password represents the network security key which is required when other computer wants to access the Internet through the virtual wireless AP .
Pagina 90

Unique Features - 90 - B. File T ransfer The File T ransfer allows twocomputerswithFileTransferenabledtoshare lestoeachother.Note:Besure toturnofftherewallonbothcomputersbeforeusingFileT ransfer .
Pagina 91

- 91 - Unique Features Step 5: The confirmation message will also appear on the target computer , asking whether to accept the le/folder from the source computer. Click Ye s to conrm.Y ou must respond in15 seconds.
Pagina 92

Unique Features - 92 - EasyT une Touch: EasyTune T ouch is a simple and easy-to-use application that allows users to remotely control their system through Apple devices, including iPhone and iP AD. Detailed functions are as follows: Option Descriptions Option Description Tuner Allows you to change CPU/memory frequency and voltage settings.
Pagina 93

- 93 - Unique Features Three ways of connection: Before using EasyT une T ouch and PictureView , use one of the three ways below to connect your Apple devices to the target computer: Wi-Fi, Bluetooth, and USB connections. iPhone 3 and iPad series only support Wi-Fi connection and iPhone 4/5 series supports all of the three connections.
Pagina 94

Unique Features - 94 - Using EasyT une Touch Step 1: Go to the main menu of the EasyTune T ouch application on your iPhone. Select Connection . Step 2: On the Connection page, select Wi . iPhone will begin to search for the computer using the same network connection.
Pagina 95

- 95 - Unique Features Step 3: Click the photo you want to share and your photo will be shown instantly on the desktop of the target computer . B. BlueT ooth Connection: Step 1: On your iPhone, go to Settings > Personal Hotspot and turn on this function.
Pagina 96

Unique Features - 96 - Step 4: When the iPhone displays the pairing code, press Pair to conrm. After the pairing is successful, your iPhone will show that it has been connected to your computer . Step 5: Y our computer will show that the iPhone has been added to your computer successfully .
Pagina 97

- 97 - Unique Features C. USB Connection: Step 1: On your iPhone, go to Settings > Personal Hotspot and turn on this function. Step 2: Connect your iPhone to your computer using the iPhone USB cable. Step 3: After the iPhone is connected to your computer , go to Control Panel > Network and Sharing Center > Cha nge adapter settings .
Pagina 98

Unique Features - 98 -.
Pagina 99

- 99 - Appendix 6-1-1 Conguring2/4/5.1/7.1-Channel Audio The motherboard provides five audio jacks on the back panel which support 2/4/5.1/7.
Pagina 100

Appendix - 100 - Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK . Step 3: On the Speakers screen, click the Speaker Configuration tab.
Pagina 101

- 101 - Appendix (Note) Enter the Digital Output(Optical) screen to configure further settings if you use the S/PDIF Out connector(s)onthebackpanelfordigital audiooutputorenterthe Digital Output screen if you use theinternalS/PDIFOutconnector(SPDIF_O)fordigitalaudiooutput.
Pagina 102

Appendix - 102 - 6-1-3 ConguringMicrophoneRecording Step 2: Connectyour microphoneto theMic injack (pink)on the back panel or the Mic in jack (pink) on the front panel. Then configure the jack for microphone functionality .
Pagina 103

- 103 - Appendix Step 1: Locate the icon in the notification area and right-click on this icon. Select Recording Devices . * Enabling Stereo Mix If the HD Audio Manager does not display the recording device you wish to use, refer to the steps below.
Pagina 104

Appendix - 104 - Step 4: Now you can access the HD Audio Manager to configure Stereo Mix and use Sound Recorder to record the sound. 6-1-4 Using the Sound Recorder A. Recording Sound 1. Makesureyouhaveconnectedthesoundinputdevice(e.
Pagina 105

- 105 - Appendix 6-2 T roubleshooting 6-2-1 Frequently Asked Questions T o read more F AQs for your motherboard, please go to the Support & DownloadsF AQ page on GIGABYTE's website.
Pagina 106

Appendix - 106 - 6-2-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn of f the power. Remove all peripherals, connecting cables, and power cord etc.
Pagina 107

- 107 - Appendix If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support & DownloadsT echnical Support page to submit your question. Our customer service staff will reply you as soon as possible.
Pagina 108

Appendix - 108 - Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a thirdparty nor beused forany unauthorizedpurpose.
Pagina 109

- 109 - Appendix FCC Notice (U.S.A. Only) This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation.
Pagina 110

Appendix - 1 10 -.
Pagina 111

- 111 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000 F AX:+886-2-8912-4005 T ech.andNon-T ech.Support(Sales/Marketing): http://ggts.
Pagina 112

Appendix - 1 12 - • GIGABYTE Global Service System T osubmit atechnicalor non-technical(Sales/Marketing) question, please link to: http://ggts.gigabyte.com.tw Then select your language to enter the system. • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEB address : http://www .

Lees een handleiding Gigabyte GA-H87N-WIFI - vermijd mogelijke problemen

Een belangrijk punt na aankoop van elk apparaat Gigabyte GA-H87N-WIFI (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:

om te weten hoe het apparaat juist te gebruiken
om te weten, hoe het product te onderhouden/het uitvoeren van periodieke keuringen Gigabyte GA-H87N-WIFI
om te weten hoe de mogelijke storingen te verwijderen Gigabyte GA-H87N-WIFI

Als u nog geen Gigabyte GA-H87N-WIFI heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gigabyte GA-H87N-WIFI vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gigabyte GA-H87N-WIFI leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gigabyte GA-H87N-WIFI krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.

In een situatie waarin je al een beziter van Gigabyte GA-H87N-WIFI bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gigabyte GA-H87N-WIFI kunnen verkorten.

Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gigabyte GA-H87N-WIFI . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.

Gigabyte GA-H87N-WIFI handleiding

Deel URL

Vergelijkbare instructies

Deel URL

Vergelijkbare instructies

Samenvatting van de inhoud op de volgende paginas van de handleiding

Pagina 1

Pagina 2

Pagina 3

Pagina 4

Pagina 5

Pagina 6

Pagina 7

Pagina 8

Pagina 9

Pagina 10

Pagina 11

Pagina 12

Pagina 13

Pagina 14

Pagina 15

Pagina 16

Pagina 17

Pagina 18

Pagina 19

Pagina 20

Pagina 21

Pagina 22

Pagina 23

Pagina 24

Pagina 25

Pagina 26

Pagina 27

Pagina 28

Pagina 29

Pagina 30

Pagina 31

Pagina 32

Pagina 33

Pagina 34

Pagina 35

Pagina 36

Pagina 37

Pagina 38

Pagina 39

Pagina 40

Pagina 41

Pagina 42

Pagina 43

Pagina 44

Pagina 45

Pagina 46

Pagina 47

Pagina 48

Pagina 49

Pagina 50

Pagina 51

Pagina 52

Pagina 53

Pagina 54

Pagina 55

Pagina 56

Pagina 57

Pagina 58

Pagina 59

Pagina 60

Pagina 61

Pagina 62

Pagina 63

Pagina 64

Pagina 65

Pagina 66

Pagina 67

Pagina 68

Pagina 69

Pagina 70

Pagina 71

Pagina 72

Pagina 73

Pagina 74