Gebruiksaanwijzing /service van het product GA-J1800N-D2H (rev. 1.0) van de fabrikant Gigabyte
Ga naar pagina of 32
GA-J1800N-D2H User's Manual Rev . 1001 12 M E - J1 8 0 D 2 H -1 0 01 R.
Copyright © 2014 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
T able of Contents GA - J 180 0N - D2H Mothe rboar d Layout ........................................................................... 4 GA - J 180 0N - D2H Mothe rboar d Bloc k Diagr am ...............................................................
GA- J 1 800N - D2H Motherboard Lay out Box Contents 5 GA-J1800N-D2H motherboard 5 Motherboard driver disk 5 T wo SA T A cables 5 User's Manual 5 I/O Shield The box contents above are for reference only and the actual items shall depend on the product package you obtain.
GA- J 1 80 0N - D2H Motherboard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications.
- 6 - Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
- 7 - 1- 2 P roductSpe cications CPU Built in with an Intel ® Dual-Core Celeron ® J1800 SoC (2.41 GHz) * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components. 1 MB Cache Memory 2 x 1.
- 8 - Back Panel Connectors 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x D-Sub port 1 x HDMI port 1 x USB 3.0/2.0 port 4 x USB 2.
- 9 - 1-3 Installing the Me mor y Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory .
- 10 - T o congure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver .
- 1 1 - 1-6 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer .
- 12 - A TX: Pin No. Denition Pin No. Denition 1 3.3V 13 3.3V 2 3.3V 14 -12V 3 GND 15 GND 4 +5V 16 PS_ON (soft On/Off) 5 GND 17 GND 6 +5V 18 GND 7 GND 19 GND 8 Power Good 20 -5V 9 5VSB (stand by +5V) 21 +5V 10 +12V 22 +5V 11 +12V (Only for 2x12-pin A TX) 23 +5V (Only for 2x12-pin A TX) 12 3.
- 13 - Pin No. Denition 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND 7) SA T A2 0/1 (SA T A 3Gb/s Connectors) The SA T A connectors conform to SA T A 3Gb/s standard and are compatible with SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device.
- 14 - 8) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, and system status indicator on the chassis to this header according to the pin assignments below .
- 15 - 10) F_USB (USB 2.0/1.1 Header) The header conforms to USB 2.0/1.1 specication. EachUSB header can provide two USB ports viaan optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
- 16 - 13) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults.T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
- 17 - BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc.
- 18 - 2- 2 Main Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.
- 19 - 2-3 Advanced ` Intel(R) Smart Connect T echnology & ISCT Support Enables or disables Intel ® Smart Connect T echnology. (Default: Disabled) ` SuperIOConguration This sectio.
- 20 - & ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled , the following functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
- 21 - ` PPMConguration & EIST Enables or disables Enhanced Intel ® Speed Step T echnology (EIST). Depending on CPU loading, Intel ® EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production.
- 22 - ` NetworkStackConguration & Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server . (Default: Disabled) & Ipv4 PXE Support EnablesordisablesIPv4PXESupport.
- 23 - & Video Allows you to select whether to enable the UEFI or legacy option ROM for the graphics controller. Do not launch Disables option ROM. UEFI only Enables UEFI option ROM only . Legacy only Enables legacy option ROM only . Legacyrst EnableslegacyoptionROMrst.
- 24 - 2- 4 Chipset & Realtek LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled .
- 25 - & Restore AC Power Loss Determines the state of the system after the return of power from an AC power loss. Power Off The system stays off upon the return of the AC power . (Default) Power On The system is turned on upon the return of the AC power .
- 26 - ` Secure Boot menu & System Mode Displays the current system mode. & Secure Boot Displays the current secure boot state. & Secure Boot Enables or disables the secure boot function.
- 27 - & VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only . EFI Driver Enables EFI option ROM. (Default) Thisitemiscongurableonlywhen Fast Boot is set to Enabled .
- 28 - & Save Changes and Reset Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Discard Changes and Reset Press <Enter> on this item and select Ye s .
- 29 - Chapter 3 Appendix • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive.
- 30 - Regulator y Statement s Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 31 - FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 32 - Conta ct Us GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000, F AX: +886-2-8912-4005 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .
Een belangrijk punt na aankoop van elk apparaat Gigabyte GA-J1800N-D2H (rev. 1.0) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gigabyte GA-J1800N-D2H (rev. 1.0) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gigabyte GA-J1800N-D2H (rev. 1.0) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gigabyte GA-J1800N-D2H (rev. 1.0) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gigabyte GA-J1800N-D2H (rev. 1.0) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gigabyte GA-J1800N-D2H (rev. 1.0) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gigabyte GA-J1800N-D2H (rev. 1.0) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gigabyte GA-J1800N-D2H (rev. 1.0) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.