Gebruiksaanwijzing /service van het product GS-R12T4H2-RH van de fabrikant Gigabyte
Ga naar pagina of 81
Service Guide GIGABYTE GS-R12T4H2-RH 1U Rack Mount Server Dual Intel ® Xeon LGA1366 Processor Serverboard Rev. 1.0.
Preface Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURA TION decided for GIGABYTE’s “global” product offering.
3 GS-R12T4H2-RH Rack Mount Server T able of Contents Preface .................................................................................................... 2 Safety, Care and Regulatory Information ...............................................
4 T able of Content Advanced ................................................................................................... 4 7 Processor Configuration ..............................................................................................
5 GS-R12T4H2-RH Rack Mount Server Safety, Care and Regulatory Information Important safety information Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use.
6 Safety Information * T o reduce the risk of fire, use only No. 26 A WG or larger telecommunications line cord. * Do not plug a modem or telephone cable into the network interface controller (NIC) receptacle.
7 GS-R12T4H2-RH Rack Mount Server the FCC. Y our telephone company may make changes in its facilities, equipment, operations, or procedures that could affect proper operation of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.
8 Safety Information NOTICE: The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device, to prevent overloading.
9 Feature Summary Motherboard GA-7TTSE-RH Processor Supported Supports dual Intel ® Xeon ® processors Intel Xeon ® Dual-Core/Quad-Core processor in LGA 1366 socket Supports Intel Quickpath Interconnect up to 6.
10 GS-R12T4H2-RH Rack Mount Server (Support RAID 0, 1, 1E) (Option) Super I/O Controller ITE IT8720F Super I/O Front I/O 2 X USB 2.0 connector Rear I/O 2 x P/S 2 ports 1 x Serial port 4 x USB 2.
11 GS-R12T4H2-RH Rack Mount Server Pre-installation Instructions Perform the steps below before you open the server or before you remove or replace any component. 1. Back up all important system and data files before performing any hardware configuration.
12 GS-R12T4H2-RH Rack Mount Server Remove the chassis cover. Step 1 Loosen the screw on the front chassis cover. Step 2 Push down the indentation located at the side of the back chassis. Step 3 Slide toward the top chassis cover. Step 4 Lift up to remove the top chassis cover.
13 Hardware Installation Process Installing the Processor Please make sure the CPU type and speed that are supported by the motherboard. Step 1 Raise the metal locking lever on the socket. Insert the CPU with the correct orientation. Step 2 The CPU only fits in one orientation.
14 GS-R12T4H2-RH Rack Mount Server Installing the Heat Sink Step 1 Place the Heat Sink on the CPU. Before putting the heat sink on the CPU, please well remember to apply the thermal conductivity compound on the CPU. Step 2 Seat the heat sink in the retention modules with the four screws.
15 GS-R12T4H2-RH Rack Mount Server Installing the Memeory Module Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down. Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module. NOTE! DIMM must be populated in order starting from DIMMA1/D1 sockets.
16 Hardware Installation Process CPU1 CPU2 1 2 3 4 5 6 7 8 9 10 12 13 14 16 17 18 11 15 No. Code No. Code 1 DDR_P1C2D0 10 DDR_P0C0D2 2 DDR_P1C2D1 1 1 DDR_P0C0D1 3 DDR_P1C2D2 12 DDR_P0C0D0 4 DDR_P1C1D0.
17 Hardware Installation Process U-DIMM Population T able P0C0D0 P1C0D0 P0C0D1 P1C0D1 P0C0D2 P1C0D2 P0C1D0 P1C1D0 P0C1D1 P1C1D1 P0C1D2 P1C1D2 P0C2D0 P1C2D0 P0C2D1 P1C2D1 P0C2D2 P1C2D2 Single-Rank Dual.
18 GS-R12T4H2-RH Rack Mount Server R-DIMM Population T able P0C0D0 P1C0D0 P0C0D1 P1C0D1 P0C0D2 P1C0D2 P0C1D0 P1C1D0 P0C1D1 P1C1D1 P0C1D2 P1C1D2 P0C2D0 P1C2D0 P0C2D1 P1C2D1 P0C2D2 P1C2D2 Single-Rank Du.
19 Hardware Installation Process Installing the PCI Expansion Card Step 1 Lift the riser bracket slightly, then pull it out from the server chassis. Step 2 Loosen the riser bracket screws. Step 3 Attach the mini card to the riser bracket and ecure the mini card with screws.
20 GS-R12T4H2-RH Rack Mount Server 3 4 5 6 5 6.
21 GS-R12T4H2-RH Rack Mount Server Installing the Hard Disk Drive Step 1 Press the release button. Step 2 Pull the locking lever to remove the HDD tray. Step 3 Slide hard disk into blank. Step 4 Secure the hard drive to the tray with four (4) screws as shown.
22 Hardware Installation Process HDD Security Lock The HDD bays incorporate a security screw to prevent accidental HDD release. T o engage the lock, turn the security screw clock-wise toward the Lock symbol. T o disengage the lock, turn the security screw counter clock-wise toward the Unlock symbol as shown.
23 GS-R12T4H2-RH Rack Mount Server Installing and Replacing the F AN Duct Step 1 Remove the airducts from the chassis by pulling the rear edge in the direction of the arrow Step 2 With fan duct installation, align the fan duct with the guiding groove.
24 Hardware Installation Process Replacing the F AN Assemblly Step 1 Remove thefan assemble pulling the rear edge in the direction of the arrow Step 2 Lift up the fan assembly from the chassis. Step 3 Reverse the previous steps to install the replacement fan assembly.
25 GS-R12T4H2-RH Rack Mount Server Replacing the Motherboard Step 1 Remove the chassis cover. See Removing the Chassis Cover on page 12. Step 2 Remove the fanduct from the chassis by pulling the rear edge in the direction of the arrow. Step 3 Remove the processor, heat sink, memory module, and PCI assembly.
26 Hardware Installation Process Replacing the Power Supply Step 1 Remove the fanduct from the chassis by pulling the rear edge. Step 2 Disconnect the three power cables from the chassis as shown in the following image. Step 3 Remove the thress screws securing the power supply to the chassis.
27 GS-R12T4H2-RH Rack Mount Server.
28 GS-R12T4H2-RH Rack Mount Server Replacing the Chassis Cover Step 1 Replace the cover, and slide the chassis in the direction of the arrow until the locking button clicks into place. Step 2 Tighten the securing screw on top of the server.until the locking button clicks into place.
29 GS-R12T4H2-RH Rack Mount Server Front View of GS-R12T4H2-RH Appearance of GS-R12T4H2-RH NOTE! For Front LED description, please go to Front Panel LED Indicators section. 1 2 6 7 3 4 8 5 9 1. HDD bay Open to install a hard drive. 2. HDD bay lock Turn this to lock and unlock the HDD bay.
System Appearance 30 Rear View of GS-R12T4H2-RH 3 1 2 3 4 5 6 7 8 9 1. Power Module Connect the power cable to the socket. 2. PS/2 port Connect the keyboard and mouse devices to this port. 3. GLAN port Connect a RJ-45 jack to this port to link to a 10/100/1000 Megabit Ethernet LAN.
31 LED Description Front Panel LED Indicator 2 3 4 1 5 6 No Indicator 1 Power status 2 System ID 3 System status 4 HDD activity Color State Description Green On System has power applied to it or ACPI .
32 GS-R12T4H2-RH Rack Mount Server Color State Description Green On Link between system and network or no access Green Blink Network access Green On Link between system and network or no access Green .
33 GS-R12T4H2-RH Rack Mount Server LAN port LED Indicator No Name 1 Speed indicator 2 Link/activity indicator Color State Description N / A O ff 10Mbps connection Green On 100Mbps.
34 LED Description Hard Disk Drive LED Description Description HDD Prsent HDD access HDD failure HDD removed HDD connected and rebuilding data HDD locate SAS/SA.
35 GS-R12T4H2-RH Rack Mount Server GC-BS14U-RH Back plane board Components 2 1 4 3 10 7 5 11 13 6 8 9 12 14 15 18 17 16 19 20 21 22 23 24 25 26 27 No Code Description 1 P 2 Power Connector (14-pin) 2 .
36 GS-R12T4H2-RH Rack Mount Server System Block Diagram VRD 11.1 VRD 11.1 CPU2 Nehalem-EP Processor LGA1366 Port 1 CPU1 Nehalem-EP Processor LGA1366 Port 1 QPI QPI INTEL ICH10R CLINK ESI DDR3 DDR3 DDR.
37 GS-R12T4H2-RH Rack Mount Server Connector Icon Description Suggest Icon Description Keyboard VGA Mouse LAN COM USB.
38 Motherboard Compononts GA-7TTSE-RH Motherboard Component Motherboard Placement and Jumper Setting 2 3 4 1 5 6 9 10 7 11 12 13 15 14 21 8 16 18 19 20 22 17 23 24.
39 GS-R12T4H2-RH Rack Mount Server Item Component 1. Processor 1 socket 2. Processor 2 socket 3. SA T A data cable ca ble connectors 4. USB connector f or internal USB (T a pe device) 5. CMOS battery 6. 3-pin IPMB connector 7. LPT_DEBUG connector 8. Serial port connector 9.
40 Jumper Setting Jumper Setting 2 1 3 4 5 6 7 1 ) BIOS_RVCR1 (BIOS Revocery jumper) 1-2 close: Normal operation. (Default setting) 2-3 close: Enable BIOS Recovery function. 2 ) CLR_CMOS1 (Clear CMOS jumper) Y ou may clear the CMOS data to its default values by this jumper .
41 GS-R12T4H2-RH Rack Mount Server 5 ) P ASS_DIS1 (Skip Supervisor password jumper) 1 1 1-2 Close: Normal operation. (Default setting) 2-3 Close: Clear Supervisor Password in BIOS setup menu. 4 ) ME_ENABLE (BMC Selection jumper) 1-2 Close: Normal operation.
42 Jumper Setting Expansion Card Components Description The two riser cards installed in the PCI riser card bracket assembly povides support for both full- heoght and low-profile expansion cards. Full height and low profile PCI Express riser cards No .
43 GS-R12T4H2-RH Rack Mount Server < > Move to previous item < > Move to next item < > Move to the item in the left hand < > Move to the item in the right hand .
44 BIOS Setup GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
45 GS-R12T4H2-RH Rack Mount Server System Date Set the System Date. Note that the “Day” automatically changed after you set the date. Syste m Ti me The time is calculated based on the 24-hour military time clock. Set the System Time (HH:MM:SS) BIOS Informa ntion BIOS V ersion: displays the BIOS version.
46 BIOS Setup T otal Me mory The BIOS determines how much total memory is present during the POST..
47 BIOS Setup Figure 2: Advanced Adva nced About This Section: Advanced With this section, allowing user to configure your system for advanced operation.
48 GS-R12T4H2-RH Rack Mount Server Processor Configuration.
49 BIOS Setup Processor Configuration This category includes the Processor information of CPU Speed, Processor ID ,Processor L2 / L3 Cache , and QPI Frequency . And setup sub-menu for CPU Power Management . Please note that setup menu options will be variable depends on the type of CPU.
50 GS-R12T4H2-RH Rack Mount Server Machine Checking Enabled Enable Machine Checking. (Default setting) Disabled Disable Machine Checking . Fast String Operations Enabled Enable Fast String Operations. (Default setting) Disabled Disable Fast String Operations.
51 GS-R12T4H2-RH Rack Mount Server Processor Power Management Figure 2-1-1: Processor Power Management EIST (G V3) & C State Enabled Enable EIST (GV3) and C State items. (Default setting) Disabled Disable EIST (GV3) and C State items. EIST (G V3) Enabled Enable EIST (GV3.
52 BIOS Setup SW_ALL In SW_ALL mode, the OS Power Manager is responsible for coordinating the P-state among loical processors with dependencies and must initiate the transition on all of those Logical Processors.
53 GS-R12T4H2-RH Rack Mount Server state. (Default setting) Disabled Disable CPU C6 Report. CPU C7 Report Enabled Desire state for the Nehalem core C7 state include in the CST as ACPI C3 state. (Default setting) Disabled Disable CPU C7 Report. Pa ckage C State Li mit Desired state for the C-State package limit.
54 BIOS Setup Memory Configuration.
55 GS-R12T4H2-RH Rack Mount Server Memory Information These following items display all information of current Base Memory, Extended Memory, , and installed DIMM Status. These items are display-only which is determined by POST (Power On Self T est) of the BIOS.
56 BIOS Setup Advanced Chipset Configuration.
57 GS-R12T4H2-RH Rack Mount Server Figure 2-3-1: Intel VT for Directed I/O (VT-d).
58 BIOS Setup Intel VT for Directed I/O (VT -d) Enabled Intel VT for Directed I/O (VT -d). (Default setting) Disabled Disable Intel VT for Directed I/O (VT -d). Interrupt Remapping Enabled Enable Interrupt Remapping. (Default setting) Disabled Disable Interrupt Remapping.
59 GS-R12T4H2-RH Rack Mount Server 2GB Select 2GB as granularity of PCI hole. QPI Control Settings Enabled Enable QPI Control settings. (Default setting) Disabled QPI Control settings. QPI Link Fast Mode Enabled Enable QPI Link Fast Mode. (Default setting) Disabled Disable QPI Link Fast Mode.
60 BIOS Setup PCI Configuration Figure 2-4: PCI Configuration Onboard LAN iSCSI Boot ROM Enabled Enable Onboard LAN iSCSI Boot ROM. Disabled Disable this function. (Defualt setting) Onboard LAN1 Control Enabled Enable Onboard LAN controller. (Defualt setting) Disabled Disable this function.
61 GS-R12T4H2-RH Rack Mount Server LAN2Option ROM Enabled Ena bl e o nboard LAN2 device and initialize device expansion ROM. (Default setting) Disabled Disable this function. Legacy USB Support This option allows user to function support for legacy USB.
62 GS-R12T4H2-RH Rack Mount Server SA T A Configuration Figure 2-5: SA T A Configuration.
63 BIOS Setup Serial A T A Enabled Enables on-board serial A T A function. (Default setting) Disabled Disables on-board serial A T A function. Native Mode Operation This option allows user to set the native mode for Serial A T A function. Auto Auto detected.
64 BIOS Setup Auto: Set parameters automatically. (Default setting) CD-ROM: Use for A T API CD-ROM drives or double click [Auto] to set all HDD parameters automatically. A T API Removable: Removable disk drive is installed here. Multi-Sector T ransfer This field displays the information of Multi-Sector Transfer Mode.
65 BIOS Setup I/O DeviceConfiguration Serial Port A This allows users to configure serial prot A by using this option. Enabled Enable the configuration. (Default setting) Disabled Disable the configuration. Base I/O Address/IRQ 3F8/IRQ4 Set IO address to 3F8/IRQ4.
66 GS-R12T4H2-RH Rack Mount Server Base I/O Address/IRQ 3F8/IRQ4 Set IO address to 3F8/IRQ4. 2F8/IRQ3 Set IO address to 2F8/IRQ3. (Default setting) 3E8/IRQ7 Set IO address to 3E8/IRQ7.
67 BIOS Setup Boot DeviceConfiguration Boot -ti me Di agnostic Screen When this item is enabled, system will shows Diagnostic status when system boot. Enabled Enable Boot-time Diagnostic screen.
68 GS-R12T4H2-RH Rack Mount Server NumLock This option allows user to select power-on state for NumLock. On Enable NumLock. (Default setting) Off Disable this function.
69 BIOS Setup Thermal and Acoustic Configuration Figure 2-8: Thermal and Acoustic Configuration Open loop Thermal Throttle Enabled Open loop Thermal Throttle. (Default setting) Disabled Disable Open loop Thermal Throttle. T e mperatur e Cha ssis inlet This item is user defined.
70 GS-R12T4H2-RH Rack Mount Server Close loop Thermal Throttle Enabled Close loop Thermal Throttle. (Default setting) Disabled Disable Close loop Thermal Throttle. T e mperatur e hystere sis This item is user defined. Use nuber key to adjust desired value.
71 GS-R12T4H2-RH Rack Mount Server Power Figure 3: Power After Power Failure This option provides user to set the mode of operation if an AC / power loss occurs. Power On System power state when AC cord is re-plugged. Stay Off Do not power on system when AC power is back.
72 BIOS Setup Security Figure 4: Security Set Supervisor Password Y ou can install and change this options for the setup menus. T ype the password up to 6 characters in lengh and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory .
73 GS-R12T4H2-RH Rack Mount Server Set User Password Y ou can only enter but do not have the right to change the options of the setup menus. When you select this function, the following message will appear at the center of the screen to assist you in creating a password.
74 BIOS Setup Server Figure 5: Server.
75 GS-R12T4H2-RH Rack Mount Server System Management.
76 BIOS Setup System M a nagement This category allows user to view the system management features. Including information of Motherboard Hardware information and software information. BMC IP Addre ss Source Address obtained by BMC running DHCP or Static address.
77 GS-R12T4H2-RH Rack Mount Server Figure 5-2: Console Redirection Console Redirection Console Redirection If this option is set to enabled, it will use a port on the motherboard to run console redirection function. On-b oard C OM A Use Serial Port A as the COM port address.
78 BIOS Setup This option allows user to set the specified baud rate. Options 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 1 15.2K. T erminal T ype This option allows user to select the specified terminal type. This is defined by IEEE. Options VT100, VT100 8bit, PC-ANSI 7bit, PC-ANSI, VT100+, VT-UTF8, ASCII.
79 GS-R12T4H2-RH Rack Mount Server Boot Figure 6: Boot Boot Priority Order This field determines which type of device the system attempt to boot from after PhoenixBIOS Post completed. Specifies the boot sequence from the available devices. If the first device is not a bootable device, the system will seek for next available device.
80 BIOS Setup Exit Figure 7: Exit About This Section: Exit Once you have changed all of the set values in the BIOS setup, you should save your changes and exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu.
81 GS-R12T4H2-RH Rack Mount Server Load Settup Default if you highlight this item and press Enter, a dialog box asks if you want to install optimal settings for all the items in the Setup utility . Press the Y key to indicate Y es, and then press Enter to install the optimal settings.
Een belangrijk punt na aankoop van elk apparaat Gigabyte GS-R12T4H2-RH (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gigabyte GS-R12T4H2-RH heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gigabyte GS-R12T4H2-RH vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gigabyte GS-R12T4H2-RH leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gigabyte GS-R12T4H2-RH krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gigabyte GS-R12T4H2-RH bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gigabyte GS-R12T4H2-RH kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gigabyte GS-R12T4H2-RH . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
