Gebruiksaanwijzing /service van het product L20AV6-A0 van de fabrikant Haier
Ga naar pagina of 24
USER'S MANUAL LCD TV RECEIVER Please read this manual carefully before using your television and keep this manual in a good place for future reference.
Content Before operation Basic operation Others T echnic operation Warnings and Cautions Safety Precautions Preparation for the Remote Control Keys and Ports Front panel Back panel Keys of remote cont.
Warning and Cautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Power supply There is a AC-DC adapter with the set that transform AC t o DC power. and the power value supplied to the adapter is marked on the label on t he adapter . Only DC power can be input into the set and AC power must not be input.
Safety Precautions The product should be tightly fixed to avoid drop damages and even fire. To avoid fire hazards, do not use this product under direct sunlight or closely to heat sources. Do not locate the product close to water or oil, which may cause fire hazards.
Safety Precautions (continued) Don't use or store inflammable materials near the product to avoid explosion or fire hazards. Don't place the product in a humid area to avoid fire hazards. The antenna of the product should be away from electric cable to avoid electric shocks.
Preparation for the Remote Control + - Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment.
Keys and Ports Front panel Back panel 1 MENU: menu display/enter the sub-menu/confirm the adjustment. 2 V-/V+ volume adjustment and adjust the parameters in the menu. 3 P-/P+ program minus and plus, select the menu options 4 TV/AV all input source select:PC-RGB/COMPONENT/AV/S-VIDEO/ TV/exit the menu .
Keys of remote control Buttons and Descriptions 1 6 7 8 9 2 3 4 5 0 TV/A V MENU VOL- 1 2 3 4 5 6 7 8 9 13 10 11 12 VOL+ 1. 2. MENU Press to display menu or enter the sub-menu 3. CH+/- 4. VOL+/- 5. 6. TV/AV Select among 7. 8. 9. AUTO.AD Only available in PC-RGB and COMPONENT 10.
Power on/off and menu operation Power on/off If you want to switch off the TV to standby mode press POWER button on TV or on remote controller . 2 If the television is on standby mode , you could press POWER ( ) button on remote control or on the TV to turn on the TV .
Viewing TV Programs There are 200 channels from 0 to 199. VOLUME CHANNEL SOUND SKIP THIS AUTO FINE FINE TUNE MANUAL SEARCH AUTO SEARCH OFF ON 4 1 6 7 8 9 2 3 4 5 0 Q.VIEW CH+ VOL- VOL+ CH- MENU How to select program If the sound of one channel is abnormal Use the direct-digit choosing button 3 Use Q.
T uning There are three ways of searching: automatic search, manual search and MFT (manual fine tune). You may operate it either on the TV or on the remote control. Here is mainly about the remote control. Auto search AUTO SEARCH 1.Press MENU button and CH+/- to select TV SETTING (note: TV SETTING is only available in TV) 2.
TUNING (Continued) Manual search Manual search DOWN UP is used to search the lower frquency channel. is used to search the higher frequency channel. If you want to memory another channel, press CH+/- to select CHANNEL and MENU to confirm, then VOL+/- to select the channel number.
TUNING (Continued) Fine tune Auto fine When you can't get a satisfactory picture and audio effect, you can fine tune to obtain. 1.Press CH+/- or digit buttons to select the channel, press MENU button and CH+/- to select TV SETTING Press MENU button to enter the TV SETTING and CH+/- to select AUTO FINE 3.
TUNING (Continued) Skip Skip 4 Press MENU to confirm and VOL+/- to set ON. Press TV/AV to exit the menu. 5 When you select channels with CH+/- button, this channel will be skipped. However, you can also use the digit Choosing button on the remote control to select this channel directly.
Multiple picture modes Adjusting the Picture and the Sound How to select the picture mode You may select the mode you want from the three preset modes and one individual mode. Press the P . STD button to select a mode you like. MILD, NATURE, VIVID and USER totally four picture modes can be selected alternately.
Multiple sound modes Adjusting the Picture and the Sound How to select the sound mode You can quickly select your most favored sound mode from the following four kinds of modes. Press the S.STD button to select the sound quality that you want.NEWS/ NATURE/ THEA TER/ USER can be selected in turn(their parameter may be adjusted due to your need).
Setting function Setting function Setting OSD Language 3 Press MENU button to confirm and VOL+/- button to select the language. 2 Press CH+/- to select LANGUAGE. 1 Press MENU button and CH+/- to select OSD SETTING,then press MENU button to enter LANGUAGE ENGLISH OSD.
·½±ãµÄͼÏñºÍÉùÒôµ÷Õû¹¦ÄÜ£¨½ÓÉÏÒ³£© Blue screen Setting function(continued) 3 Press MENU button to confirm, then press VOL+/- to select ON/OFF.
PC Mode Function PC mode function 1024X768 60HZ IMAGE SETTING COLOR SETTING OSD SETTING RESET INPUT SOURCE CONTRAST BRIGHTNESS AUTO CONFIG PHASE CLOCK 50 H-POSITION V-POSITION NATIVE 9300K 6500K USER 50 50 50 Image adjustment You can adjust the contrast, brightness and the position of the image.
Connection Connecting additional equipments Headphone port AC-DC adapter To power socket You can connect the DVD,VCR to the set to enjoy a higher quality of picture .
To D-SUB IN 1. Link VGA output port of a PC to the D-SUB IN port of the television. 2. Link audio cable of a PC to PC AUDI O IN port of television. 3. Press TV/AV button to select PC-RGB mode. 4. T urn on the PC and its screen picture will be dis played on the television screen.
Troubleshooting Used as TV Before arranging for service, firstly know the status and then chec k simply as follows: No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power . Verify if electricity is available.
Specifications Following are some reference specifications, which may vary from that of the television that you have just purchased due to technical innovations.
V0.1 0090506956A.
Een belangrijk punt na aankoop van elk apparaat Haier L20AV6-A0 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Haier L20AV6-A0 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Haier L20AV6-A0 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Haier L20AV6-A0 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Haier L20AV6-A0 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Haier L20AV6-A0 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Haier L20AV6-A0 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Haier L20AV6-A0 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
