Gebruiksaanwijzing /service van het product HE195ANB van de fabrikant Hannspree
Ga naar pagina of 24
LCD Display HE195ABB(HSG1249)/HE195ANB(HSG1249)/ HE225DPB(HSG1251).
User ’ s Manual OSD[V5.9] 2 Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S t atement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User ’ s Manual 3 RECYCLING INFORMAT ION We, at HANNspree care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
User ’ s Manual 4 T ABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 5 PRECAUTIONS .................................................................................
User ’ s Manual 5 SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to comply with the emission limits.
User ’ s Manual 6 SPECIAL NOTES ON LCD MONITORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the sc reen may flicker during initial use. T urn off the Power Switch and then turn it on again to make sure the flicker disappears.
User ’ s Manual 7 BEFORE YOU OPERA TE THE MONITOR FEA TURES Model: HE195ABB HE195ANB HE225 Size: 47cm/ 18.5” 47cm/ 18.5” 54,6cm/ 21.5” • Crisp, Clear Display for W indows • EP A ENERGY ST .
User ’ s Manual 8 INST ALLA TION INSTRUCTIONS INST ALL REMOVE Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Attach the foot stand to the monitor colum n (Figure 1). 3. Rotate the stand as shown in the illust ration (Figure 2) until a 'click' is heard.
User ’ s Manual 9 POWER POWER SOURCE: 1. Make sure that the power cord is th e correct type required in your area. 2. This LCD monitor has an Internal universal power supply that allo ws operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.
User ’ s Manual 10 MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer before perform ing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s VGA port.
User ’ s Manual 11 ADJUSTING THE VIEWING ANGLE • For optim al viewing it is recommended to look at the full face of the monitor , then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the m onitor when you change the monitor ’ s angle.
User ’ s Manual 12 OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture can be adjuste d to your personal preferences.
User ’ s Manual 13 FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of m onitor ’ s power . • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / Return: T urn the OSD menu on/off or return to the previous menu.
User ’ s Manual 14 Resolution 640×400@70Hz ↔ 720×400@70Hz 640×480@60Hz ↔ 720×480@60Hz 1024×768@70Hz ↔ 1280×768@70Hz 1280×768@60Hz ↔ 1360×768@60Hz 1400×1050@60Hz ↔ 1680×1050@60Hz .
User ’ s Manual 15 HOW T O ADJ UST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference.
User ’ s Manual 16 display , which does not ensure the image is shown as is or in initial scale. 「 FIT 」 indicates scaling by the proportion of original images, which may cause the screen showing black bands.
User ’ s Manual 17 the OSD. Enter the option and adjust the level. OSD TIME-OUT Select 「 OSD TIME-OUT 」 option to set the OSD time out from 10 to 100 seconds.
User ’ s Manual 18 PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capa bilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities.
User ’ s Manual 19 TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible.
User ’ s Manual 20 INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only] Addendum related to Windows 7 When you encounter display problem under Windows 7, you need to do the following: 1.
User ’ s Manual 21 ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connect ed, if the connector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage.
User ’ s Manual 22 27 1440×900 @60Hz 55.469 59.901 ▲ 28 1440×900 @75Hz 70.635 74.984 ▲ 29 1400×1050 @60Hz 64.744 59.948 ▲ 30 1680×1050 @60Hz 65.
User ’ s Manual 23 APPENDIX SPECIF ICA TIONS HE195 LCD Panel Driving system TFT Color LCD Size 47 cm / 18.5” Diagonal Pixel pitch 0,3 mm(H) × 0,3 mm(V) V ideo H-Frequency 30KHz – 61KHz V -Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max.
User ’ s Manual 24 SPECIF ICA T IONS HE225 LCD Panel Driving system TFT Color LCD Size 54,6 cm / 21.5” Diagonal Pixel pitch 0,248 mm(H) × 0,248 mm(V) V ideo H-Frequency 30KHz – 83KHz V -Frequency 56Hz – 75Hz Display Colors 16.
Een belangrijk punt na aankoop van elk apparaat Hannspree HE195ANB (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Hannspree HE195ANB heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Hannspree HE195ANB vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Hannspree HE195ANB leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Hannspree HE195ANB krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Hannspree HE195ANB bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Hannspree HE195ANB kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Hannspree HE195ANB . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
