Gebruiksaanwijzing /service van het product HURRICHILL AP120BC1000-3 van de fabrikant American Panel
Ga naar pagina of 50
REV. A Cooler is Better! TM USER’S MANUAL BLAST CHILLERS/SHOCK FREEZERS MODEL AP120BC1000-3 MODEL AP120BCF1300-3 American Panel Corporation 5800 S.E. 78th Street, Ocala, Florida 34472-3412 Phone: (352) 245-7055 Fax: (352) 245-0726 E-mail: service@americanpanel.
AP120BC1000-3/ AP120BCF 1300-3 Manual 1 INDEX INTRODUCTION 3 CONTROLLER FEATURES 3 OPERATING MODES 3 AUTOMATIC MODE 3 MANUAL MODE 4 OPERATING CYCLES 4 PRINTER (OPTIONAL) 4 PC CONNECTION (OPTIONAL) 4 I.
AP120BC1000-3/ AP120BCF 1300-3 Manual 2 PROGRAMMING 15 1. INITIAL PROGRAMMING 15 2. PROGRAMMING THE CYCLES 19 AUTOMATIC SOFT CYCLE PARAMETERS PROGRAMMING 19 AUTOMATIC HARD CYCLE PA RAMETERS PROGRAMMIN.
AP120BC1000-3/ AP120BCF 1300-3 Manual 3 INTRODUCTION Blast Chiller Model AP120BC1000-3 is used to rapidly chill cooked foods to temperatures suitable for refrigerated storage. It is capable of lowering t he core temperature of most foods from 160 o F to 40 o F in 90 minutes.
AP120BC1000-3/ AP120BCF 1300-3 Manual 4 MANUAL MODE Operating time is set manually, by the operator, for the meal that has been chosen. Air temperature is controlled by the air probe. If the food probes have been inserted into the food they will provide temperature readouts only.
AP120BC1000-3/ AP120BCF 1300-3 Manual 5 INSTALLATION OF REMOTE UNITS REQUIREMENTS TO BE MET DURING INSTALLATION (8 STEPS) COMPRESSOR FIG. 1 1. Inclination of the piping. FIG. 2 2. Fastening of brackets on insulated piping. FIG. 3 3. Airtight welding. FIG.
AP120BC1000-3/ AP120BCF 1300-3 Manual 6 INSTALLATION AT DIFFERENT LEVELS If the remote condensing unit is installed at a higher level than the cabinet (FIG. 6) insert a siphon in the return line at every 6 ft. of difference in height. If the remote condensing unit is installed at a lower level than the cabinet (FIG.
AP120BC1000-3/ AP120BCF 1300-3 Manual 7 INSTALLATION WARNINGS READ ALL OF THE INSTRUCTIONS IN THIS MANUAL BEFORE YOU ATTEMPT TO INSTALL THE EQUIPMENT. ALWAYS DISCONNECT THE UNIT FROM THE POWE R SOURCE BEFORE PERFORMING ANY SERVICE OR MAINTENANCE.
AP120BC1000-3/ AP120BCF 1300-3 Manual 8 ELECTRICAL AND REFRIGERATION SPECIFICATIONS CABINET REMOTE CONDENSER MODEL VOLTAGE AMPS POWER SUPPLY CORD BTU/H AT 14°F EVAP. TEMP. & 105°F COND. TEMP. TYPE AP120BC1000-3 208/3/60 24 10-4 110,000 MEDIUM TEMP.
AP120BC1000-3/ AP120BCF 1300-3 Manual 9 SPACES AROUND THE CABINET x At least 15" clear space is required above the unit for service. x At least 6" clear space is required on both sides of the cabinet. x At least 6" clear space is required on the rear of the cabinet for drain hookup and maintenance.
AP120BC1000-3/ AP120BCF 1300-3 Manual 10 STARTING & TESTING THE UNIT 1. To charge the unit, use the "HARD" cycle and the "MANUAL" mode.
AP120BC1000-3/ AP120BCF 1300-3 Manual 11 USING THE HURRICHILL™ TECHNOLOGY BLAST CHILLING All cooked food rapidly loses its quality and aroma if it is not served promptly. Natural bacteria growth, the main reason why food becomes stale, takes place at an exponential rate between 140°F and 40°F.
AP120BC1000-3/ AP120BCF 1300-3 Manual 12 PANNING AND LOADING PANNING 1. Standard pan depth is 2-1/2”. Other depths can be used but are not recommended as their use would require an increase in the cycle time. 2. Stainless steel or aluminum pans are recommended, as plastic containers will increase the chilling time.
AP120BC1000-3/ AP120BCF 1300-3 Manual 13 CONTROL PANEL FOR MODELS AP120BC1000-3 / AP120BCF1300-3 BLAST CHILLERS / SHOCK FREEZERS.
AP120BC1000-3/ AP120BCF 1300-3 Manual 14 KEYBOARD KEYS ON/OFF & START/STOP CYCLE KEYS ON/OFF SOFT CYCLE START/STOP HARD CYCLE SHOCK CYCLE PROGRAMMING KEYS AUTOMATIC CYCLE UP MANUAL CYCLE DOWN UV L.
AP120BC1000-3/ AP120BCF 1300-3 Manual 15 PROGRAMMING 1. INITIAL PROGRAMMING NOTE: Initial programming is preset at the factory. Use this section only if changes are desired. If no changes are to be made, skip to Page 17 ( 2. Programming the cycles ). a.
AP120BC1000-3/ AP120BCF 1300-3 Manual 16 g. To set the day, press or then press . 03(day) Blinks h. To set the hour, press or (be sure to continue to press the buttons until the hour and " AM" or " PM" show correctly) then press . 10(hours) Blinks i.
AP120BC1000-3/ AP120BCF 1300-3 Manual 17 : The low food alarm temperature should be left at 35 o F. However, to make a change o. To change the temperature, press or then press . 35 Blinks p. To change to YES or NO , press or then press . YES Blinks * YES for shock freezers (AP120 BCF1300-3) NO for blast chillers (AP120BC1000-3), and go to step r.
AP120BC1000-3/ AP120BCF 1300-3 Manual 18 For YES, the display will show: The printer baud rate should be left at 1200. However, to make a change: x. To change the baud rate, press or then press . 1200 Blinks y. To change the timing, press or then press .
AP120BC1000-3/ AP120BCF 1300-3 Manual 19 2. PROGRAMMING THE CYCLES a. With the display reading "OFF" , press . b. Enter the password (see page 14), then press . AUTOMATIC SOFT CYCLE PARAMETERS PROGRAMMING The LED for "A" will be "ON" .
AP120BC1000-3/ AP120BCF 1300-3 Manual 20 AUTOMATIC HARD CYCLE PARAMETERS PROGRAMMING A fter about 2 seconds the display will automatically change to: The LED for "A" will be "ON" . The LED'S for cycles will be blinking. i. Press the button.
AP120BC1000-3/ AP120BCF 1300-3 Manual 21 q. To change the temperature, press or then press . 42 Blinks The display will show: PARAM. PROGRA MMING AUTOMATIC HARD CYCLE PROGRAMMING COMPLETE PARAM.
AP120BC1000-3/ AP120BCF 1300-3 Manual 22 UV LIGHT CYCLE PARAMETERS PROGRAMMING A fter about 2 seconds the display will automatically change to: The LED for "A" will be "ON" . The LED'S for cycles will be blinking. x. Press the button.
AP120BC1000-3/ AP120BCF 1300-3 Manual 23 HEATED PROBE CYCLE PARAMETERS PROGRAMMING After about 2 seconds the display will automatically change to: The LED for "A" will be "ON" . The LED'S for cycles will be blinking. dd. Press the button.
AP120BC1000-3/ AP120BCF 1300-3 Manual 24 kk. To change the time, press or then press . 01:30 Blinks ll. To change the temperature, press or then press .
AP120BC1000-3/ AP120BCF 1300-3 Manual 25 rr. To change the temperature, press or then press . 28 Blinks ss. To change the temperature, press or then press . 35 Blinks tt. To change the time, press or then press . 01:00 Blinks uu. To change the temperature, press or then press .
AP120BC1000-3/ AP120BCF 1300-3 Manual 26 zz. To change the time, press or then press . 04:00 Blinks aaa.To change the temperature, press or then press . -4 Blinks bbb.To change the temperature, press or then press . 3 Blinks The display will show: PARAM.
AP120BC1000-3/ AP120BCF 1300-3 Manual 27 3. RECIPE NAME PROGRAMMING a. With the display reading "OFF" , press the button and hold it for 10 seconds. b. Enter your password (see page 14), then press . c. Press or to change to the desired recipe number (from 1 to 150), then press which will move you to the "NAME" line.
AP120BC1000-3/ AP120BCF 1300-3 Manual 28 OPERATION 1. AUTOMATIC MODE - SOFT CHILL a. With the display reading "OFF" , press the ( “ON/OFF” ) button. b. To select the soft cycle, press the appropriate bu tton . The LED for "SOFT" will be steady "ON" .
AP120BC1000-3/ AP120BCF 1300-3 Manual 29 alt alt The display will show: ernating with ernating with h. Press the (" START/STOP" ) button to start the cycle. PRESS START Blinks The display will show briefly: Then the display will show: READY TO START PRESS START 03.
AP120BC1000-3/ AP120BCF 1300-3 Manual 30 2. MANUAL MODE - SOFT CHILL F INSTEAD OF AUTOMATIC you wish to select a MANUAL cycle, perform steps 1.a, 1.b, 1.c, 1.d 1.e, 1f and 1.g (above), except in step 1.c press button , instead of button . The LED for "MANUAL" will then be steady "ON".
AP120BC1000-3/ AP120BCF 1300-3 Manual 31 3. HARD CHILL CYCLE To perform a hard chill cycle, follow steps 1 or 2 (above), EXCEPT in step 1.b (above) press instead of . 4. SHOCK FREEZE CYCLE To perform a shock freeze cycle, follow steps 1 or 2 (above), EXCEPT in step 1.
AP120BC1000-3/ AP120BCF 1300-3 Manual 32 . 6. DEFROST CYCLE The defrost cycle runs the evaporator fan for 5 minutes with the door open a. To perform a defrost cycle, press the ( "DEFROST" ) button. b. Open the door. c. Press the ( "START/ST OP") button to start the defrost cycle.
AP120BC1000-3/ AP120BCF 1300-3 Manual 33 7. HEATED FOOD PROBE a. To select the heated food probe, press ("HEATED PROBE"). If the food probe temperature is over 30 o F, the display will show: After a few seconds it will go back to reading: If the food probe temperature is les than 30 o F, the display will show: b.
AP120BC1000-3/ AP120BCF 1300-3 Manual 34 8. PREPARING AND USING THE OPTIONAL PRINTER a. With the display reading "OFF" , press the ( “PRINT” ) button. b. To start printing, press the ( "START/STOP") button. After a few seconds the display will show: and the printer will be printing.
AP120BC1000-3/ AP120BCF 1300-3 Manual 35 PRINTER NOTE: The optional printer is delivered fully installed LOADING A ROLL OF PAPER 1. Remove the paper cover by pressing on the groove patterns to pop the front edge up. Lift off the cover. 2. Press the rocker switch to the left.
AP120BC1000-3/ AP120BCF 1300-3 Manual 36 REPLACING THE RIBBON (NO PAPER IN THE PRINTER) 1. Turn the printer OFF. 2. Four small grooves are embossed on each side of the printer cover. Push down on one or both of these areas until the printer cover tilts up, then lift the cover completely off.
AP120BC1000-3/ AP120BCF 1300-3 Manual 37 MAINTENANCE AND CLEANING CLEANING THE CONDENSER For correct and efficient operation of the blast chiller, it is necessary that the condenser be kept clean so that air can circulate around it freely and come into contact with the whole of its surface.
AP120BC1000-3/ AP120BCF 1300-3 Manual 38 WIRING DIAGRAMS.
AP120BC1000-3/ AP120BCF 1300-3 Manual 39.
AP120BC1000-3/ AP120BCF 1300-3 Manual 40.
AP120BC1000-3/ AP120BCF 1300-3 Manual 41.
AP120BC1000-3/ AP120BCF 1300-3 Manual 42.
AP120BC1000-3/ AP120BCF 1300-3 Manual 43.
AP120BC1000-3/ AP120BCF 1300-3 Manual 44.
AP120BC1000-3/ AP120BCF 1300-3 Manual 45.
AP120BC1000-3/ AP120BCF 1300-3 Manual 46 COMPUTER CONNECTION.
AP120BC1000-3/ AP120BCF 1300-3 Manual 47 PARTS LIST PART # DESCRIPTION 990059 PRINTER 990074 TRANSFORMER 208V/24V/12V 990075 TRANSFORMER FOR PRINTER 990217 ELECTRONIC BOARD "BLUE SYS" (D) 99.
AP120BC1000-3/ AP120BCF 1300-3 Manual 48 STANDARD WARRANTY AMERICAN PANEL CORP. 5800 S.E. 78th Street, Ocala, Florida 34472-3412 American Panel Corporation products are warranted to the original user .
AP120BC1000-3/ AP120BCF 1300-3 Manual 49 ORDERING PRINTER SUPPLIES (RIBBON & PAPER) Replacement paper and ribbons for the optional printer for your blast chiller can be ordered from a local distributor of Weigh-Tronix supplies. To locate a distributor near you: If you have access to the internet: Go to www.
Een belangrijk punt na aankoop van elk apparaat American Panel HURRICHILL AP120BC1000-3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen American Panel HURRICHILL AP120BC1000-3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens American Panel HURRICHILL AP120BC1000-3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding American Panel HURRICHILL AP120BC1000-3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over American Panel HURRICHILL AP120BC1000-3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van American Panel HURRICHILL AP120BC1000-3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de American Panel HURRICHILL AP120BC1000-3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met American Panel HURRICHILL AP120BC1000-3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
