Gebruiksaanwijzing /service van het product 56072 van de fabrikant Harbor Freight Tools
Ga naar pagina of 20
20 T ON LOG SPLITTER 56072 SET UP , OPERA TING, AND SER VICING INSTRUCTIONS W ARNING! IMPORT ANT INFORMA TION The Hitch Coupler MUST be properly sec ure d to the hitch ball of th e towin g veh icl e. After assembly and attachment, pull up and down on the Hitch Coupler to make sure the hitc h ball is tting snugl y in the Hitch Coup ler .
SKU 56072 For technical questions, please call 1-800-444-3353. Page 2 CONTENTS IMPORT ANT SAFETY INFORMA TION ............................ 3 BASIC SPECIFICA TIONS ............. 7 UNP ACKING .................................. 7 SET UP INSTRUCTIONS ....
SKU 56072 For technical questions, please call 1-800-444-3353. Page 3 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 4 Wear ANSI-approved safety goggles, 5. heavy-duty work gloves, and dust mask/respirator during set up. Use only lubricants and fuel recom- 6. mended in the engine manual or in the Specications chart of this man - ual.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 5 SERIOUS PERSONAL INJURY , or DEA TH. Never place hands or feet between 1 1. the log and splitter wedge, or between the log and the ram during the forward or reverse stroke. Never place your hands or body near 12.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 6 Before use, check for misalignment 29. or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’ s operation. If damaged, have the equipment serviced before using.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 7 BASIC SPECIFICA TIONS Hydraulic Jack Force 20 T ons Hydraulic Fluid Capacity 8 Gallons Hydraulic Fluid Anti-abrasion ISO viscosity grade #46 Hydraulic Fluid. Change every 100 hours of use.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 8 be cleaned even if they are new or appear clean. Allow all pieces to dry completely . Place fresh, clean bearing grease in 3. the packer (not included). With the grease-lled bearing packer 4.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 9 Raise the Engine and Oil T ank 1. Assembly about 9 inches onto a secure platform. Connect the Wheels to the axles using the supplied hardware (parts 53 - 55) as previously stated. (It may be necessary to reset the wheel bearings after the Log Splitter has been towed.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 10 Figure D 8. The Spindles are used to assemble and connect the Log Lift (01) to the main unit - See Figure D.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 1 1 the air inlet hole by tightening the Hydraulic Oil Cap. OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 12 Figure G 6. Push the LEFT control lever forward to engage the hydraulic ram and split the log.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 13 Figure H Clevis Pin (74) 3. Raise the Log Lift and insert the Clevis Pin (74) in the upper hole and secure with R-pin (41) - See Figure H. Figure I Push Pin (42) 4. Move the front leg up and secure it at the second Pin hole.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 14 SER VICING TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL ST ARTING: T urn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and disconnect the spark plug wire(s) before performing any inspection, maintenance, or cleaning procedures.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 15 Changing the Hydraulic Fluid Place a container underneath the 1. hydraulic uid tank to catch the uid, and unscrew the cap on the bottom of the tank. Unscrew the Hydraulic Oil Cap to 2.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 16 P ARTS LIST Part Description Qty 1 Log Lift 1 2 Hair Pin Clip 8 3 Spindle #1 M32 1 4 Hex Bolt M12x70 1 5 Nut M12 1 6 Hydraulic Cylinder 1 7 Spindle #2 M10.6 1 8 Fitting #1 3 9 Hex Bolt M10x70 5 10 Directional V alve 1 11 Connector 2 12 Connector 5 13 Return Hose 27.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 17 ASSEMBL Y DIAGRAM.
Hydraulic Ram Seals Parts List & Diagram Part Description Qty 01-6 O-ring Seal 1 18*5.3 4 01-7 O-ring Seal 38.5*3.55 1 01-9 J T ype Rubber Seal 50*70*10 1 01-10 Y T ype Seal 50*70*10 1 01-1 1 O-ring Seal 50*3.55 1 01-14 Nylon W asher 127*1 18*2 3 Part Description Qty 31-5 Nylon Cap 63 54.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 19 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
SKU 56072 For technical questions, please call 1-800-444-3353. Page 20 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and.
Een belangrijk punt na aankoop van elk apparaat Harbor Freight Tools 56072 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Harbor Freight Tools 56072 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Harbor Freight Tools 56072 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Harbor Freight Tools 56072 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Harbor Freight Tools 56072 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Harbor Freight Tools 56072 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Harbor Freight Tools 56072 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Harbor Freight Tools 56072 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
