Gebruiksaanwijzing /service van het product BDS770 van de fabrikant Harman-Kardon
Ga naar pagina of 34
Blu-ray Disc ™ rec eiver BDS 270/BDS 570 Owner’s Manual.
2 BDS 270/BDS 570 Table of Contents IMPORTANT SAFETY INSTRUCTIONS 3 INTRODUCTION 4 VERIFY LINE VOLTAGE BEFORE USING 4 UNPACKING 4 INSTALLATION LOCATION 4 CLEANING 4 MOVING THE RECEIVER 4 SUPPLIED ACCE.
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.
4 Introduction, Verify Line Voltage Before Using, Unpacking, Installation Location, Cleaning, and Moving the Receiver BDS 270/BDS 570 Introduction Please register your product on our Web site at www.harmankardon.com. Note: You’ll need the product’s serial number.
ENglIsh 5 Supplied Accessories and Receiver Front-Panel Controls Disc slot: Insert a compatible disc into the slot. The BDS receiver’s disc player will accept 5-inch (12cm) and 3-inch (8cm) discs.
6 Receiver Rear-Panel Connections Receiver Rear-Panel Connections BDS 270/BDS 570 Main Power Switch Speaker Connectors Fan Vents Component Video Input Connector HDMI Input Connectors HDMI Monitor Out .
ENglIsh 7 Receiver Rear-Panel Connections NOTE: See the Connections section, on page 10, for detailed information about making connections. Main Power switch: This mechanical switch turns the BDS receiver’s power supply on or off.
8 Remote Control Functions Remote Control Functions DISC AUX BR ID GE RA DI O HDMI1 CO MP ON E NT HDMI3 HDMI2 2 EJECT POWER TV 1 3 5 4 6 8 0 7 9 RE PE A T HO ME DI SP LA Y OP TI ONS S URROUND OK TOP M.
ENglIsh 9 Remote Control Functions Surround button: Pressing this button cycles through all of the surround-sound modes that are available for the active program. Each press of the Surround button will change to the next mode in line. A pop-up display will appear, showing the modes as you cycle through them.
10 Connections CAUTION: Before making any connections to the BDS receiver, ensure that the receiver’s AC cord is unplugged from the receiver and the AC outlet. Making speaker connections with the receiver plugged in and turned on could damage the speakers.
ENglIsh 11 Connections Connecting a TV or Video Display Use the supplied HDMI cable to connect the BDS receiver’s HDMI output to your TV/video display’s HDMI input.
12 Connections Connecting Your Coaxial Digital Audio Source Device If one of your non-HDMI source devices has a coaxial digital output, connect it to the receiver’s Coaxial Digital Input connector. NOTE: Make only one type of digital connection (HDMI, optical or coaxial) from each device.
ENglIsh 13 Connections Connecting to a Local Area Network (LAN) Use a Cat. 5/5E network cable (not supplied) to connect the BDS receiver’s BD-Live connector directly to a network router, a network switch, a network modem or an Ethernet network wall jack that has Internet access.
14 Preparing the Remote Control Preparing the Remote Control Installing the Batteries Your rece ive r’s remote control uses three AAA batteries (supplied). Insert the batteries as shown in the illustration, making sure to observe the correct polarity.
ENglIsh 15 Programming Remote Control “Punch-Through” Commands After programming the remote to control an auxiliary (Aux) component, you can also program it so it will control the Aux component’s channel up/down and transport functions (Play, Pause, etc.
16 Setting Up the Receiver After selecting your TV’s highest resolution, press the OK button, and the Wizard’s aspect- ratio screen will appear. Note: If you are unsure of your display’s highest resolution, select “Auto” and the BDS receiver will select the optimal resolution for you.
ENglIsh 17 Setting Up the Receiver Display Settings Select to adjust display settings TV Video Processing Aspect Ratio Resolution Color Space Film Mode HDMI Deep Color 16:9 Full Auto RGB Off Off Displ.
18 Setting Up the Receiver EZ Set/EQ: The BDS receiver’s EZSet/EQ™ system uses the supplied EzSet/EQ microphone to perform this important step automatically. Before beginning, be sure you have correctly connected your speakers to the BDS receiver.
ENglIsh 19 Setting Up the Receiver and Using the Receiver Manual Configuration: After you select your speaker system’s configuration, the speaker setup screen will appear: L (0.0 dB, 0.9m/3 ft) R (0.0 dB, 0.9m/3 ft) T one Controls Audio Output Speaker Settings SUB L LS RS R C Audio Settings Setting the speaker distances: 1.
20 To select a source from the list, use the Cursor Up/Down buttons to highlight the desired source, then press the OK button to select it. You can also select a source directly by pressing its Input button on the remote.
ENglIsh 21 Using the Receiver and Using the Disc Player Surround-Sound Modes Your BDS receiver can decode and play audio programs in these native audio formats: • Dolby Digital • Dolby Digital Plu.
22 Supported Media Codecs The BDS receiver can play media recorded in the following audio/video codecs: • MPEG 1, Layer 1 • MPEG 2, Layer 2 • MPEG 2, Layer 3 • H.264 • VC-1 • MP3 (from CD-R/RW, DVD+R/+RW, BD-R/RE and USB) • JPEG (from CD-R/RW, DVD+R/+RW, BD-R/RE and USB) • DivX 3.
ENglIsh 23 Playing Music CDs When the BDS receiver is playing a music CD, the top bar shows the current playback- mode icon, the type of disc, the track currently playing, the number of total tracks on the disc and the time display.
24 Using the Radio, Listening to Audio Sources and Playing Files from USB Devices and CD Data Discs To listen to a preset station: Press the Channel + or Channel – button. The radio will tune to the next higher or lower preset station. – OR – Use the number buttons to enter the preset number.
ENglIsh 25 Playing Files from USB Devices and CD Data Discs Viewing Photos In the top directory, select “Photo.” Select a folder containing photo files and highlight a photo file in the folder. A thumbnail of the highlighted photo will appear on the right of the screen.
26 Playing Files from USB Devices and CD Data Discs, and Using Playlists BDS 270/BDS 570 If a selected MP3 file has an album cover-art ID3 tag, the art will be displayed on the screen. Use the Play, Pause, Stop, Prev/Step, Next/Step, Search Down/Slow and Search Up/Slow buttons to control music-file playback.
ENglIsh 27 Troubleshooting Troubleshooting If your BDS receiver isn’t performing the way you think it should, check to see if the problem is covered in this section before calling your dealer or contacting a Harman Kardon representative.
28 Aux Component Remote-Control Code List Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers ADMIRAL 0192 0123 1088 1105 AIWA 1110 AKAI 1011 1020 1022 1042 1053 1056 1089 1093 ALB.
ENglIsh 29 Aux Component Remote-Control Code List Manufacturer Code Numbers LG (GOLDSTAR) 0 13 2 0 12 8 0 12 2 0 11 0 01 01 0002 0013 2004 LLOYTRON 0173 0172 LODGENET 0069 LXI 0148 0145 0077 MAGNAVOX .
30 Aux Component Remote-Control Code List Manufacturer Code Numbers ABC 3 0 11 30 01 ALLEGRO 3111 AMERICAS T 3212 ARCHER 3112 BELCOR 3113 BT C A B L E 4007 CABLE ST AR 3113 3033 CABLETIME 4008 4011 40.
ENglIsh 31 Aux Component Remote-Control Code List Manufacturer Code Numbers A IWA 6 0 41 AK AI 6033 ALBA 6001 6011 AMSTR AD 6032 ANKARO 6021 AST RO 6076 6077 6078 6079 6080 6081 6082 6083 BA RCOM 6021.
32 Aux Component Remote-Control Code List Manufacturer Code Numbers PANASONIC 5069 5066 5057 5053 6024 6031 PANSAT 5020 PERSONAL CABLE 5018 PHILIPS 5075 6019 6021 6024 6032 6033 6053 PICO 50 07 PREMIE.
ENglIsh 33 Specifications BDS 570 Receiver and BDS 270 Receiver Audio Section Continuous average power, stereo model: 65 watts per channel, 20Hz – 20kHz, @ <0.1% THD, both channels driven into 6 ohms Multichannel power (BDS 570 only): 65 watts per channel, 20Hz – 20kHz, @ <0.
HARMAN Consumer, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only) Made in P.R.C. © 2011 HARMAN International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Een belangrijk punt na aankoop van elk apparaat Harman-Kardon BDS770 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Harman-Kardon BDS770 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Harman-Kardon BDS770 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Harman-Kardon BDS770 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Harman-Kardon BDS770 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Harman-Kardon BDS770 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Harman-Kardon BDS770 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Harman-Kardon BDS770 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
