Gebruiksaanwijzing /service van het product 42PD7500 van de fabrikant Hitachi
Ga naar pagina of 66
Colour Plasma Display Model PW2 42PD7500 USER'S MANUAL READ THE INSTRUCTIONS INSIDE CAREFULL Y . KEEP THIS USER'S MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your monitor . SERIAL NO. The serial number is located on the rear of the monitor .
1 USER'S MANUAL Thank you very much for purchasing the HIT ACHI Plasma Display . Before using your monitor , please carefully read the "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to operate the monitor properly .
2 Important Please read this User's Manual thor oughly , especially the Safety Instructions on Page 4 to 7. Mis-use may cause damage to your plasma monitor , which could shorten its lifespan, or cause injury to yourself.
3 CONTENTS FEA TURES ....................................................2 SAFETY INSTRUCTIONS ..............................4 IMAGE RETENTION OF PLASMA DISPLA Y ..8 COMPONENT NAMES ..................................9 Main Unit .......................
4 SAFETY INSTRUCTIONS About the Symbols This Plasma monitor has been designed and manufactured to meet international safety standards, but like any electrical equipmen t, care must be taken if you are to obtain the best results and safety is to be assured.
5 W ARNING Be cautious of the power cord connection. Incorrect connection of the power cor d could result in fir e or electrical shock. • Do not touch the power cord with a wet hand. • Check that the connecting portion of the power cor d is clean (with no dust), befor e using.
6 CAUTION PRECAUTIONS Be careful in moving the monitor . Neglect could result in an injury or damage. • Do not move the monitor during use. Before moving, disconnect the power plug and all external connections. • Y ou ar e advised to move the monitor with two persons.
7 Prevention of an obstacle to Radio r eceivers This monitor has been designed pursuant to the international EMI standards. This is to prevent a pr oblem to Radio receivers. • Keep the monitor away from Radio. • Adjust Radio antennas in order for the monitor not to r eceive interference.
8 IMAGE RETENTION OF PLASMA DISPLA Y There are different characteristics that result in panel image retention depending on how the plasma display is used.
9 COMPONENT NAMES Main Unit Control panel • Adjustment buttons are located on the bottom. • The back cover is provided with indications to distinguish the adjustment buttons.
10 Remote contr ol POWER button INPUT SELECT buttons MENU button OK button SOUND MODE button VOLUME UP/DOWN button PROGRAMME SELECT buttons FREEZE/MUL TI MODE button RECALL button FUNCTION SELECT butt.
11 Dynamic Natural Cinema Movie Music Favourite Speech PICTURE MODE Y ou may recall the pictur e mode by pressing this button. Each time pr essed, picture mode is changed in following sequence. INPUT SELECT Press this button to change input mode. DVD CONTROL Y ou can use these buttons to operate the selected brand of DVD player .
• In order to pr event an internal temperature increase, maintain a space of 10cm (4 inches : For a desktop set-up) or more between the sides and other objects such as walls, etc., so that the ventilation holes are not blocked.(*) CA UTION 12 INST ALLA TION INSTRUCTIONS Installation Use one of the special mount units to install this product.
13 Connecting to an Audio V isual Device (1) Make sure that the power switch of the monitor is turned off. (2) Make sure that the power switch of the audio visual device is turned off.
14 Precautions when connecting the antenna • Please use a coaxial cable which is free fr om interference to connect the antenna. Avoid using a parallel flat feeder wir e as interference may occur , causing r eception to be unstable and stripe noise to appear on the screen.
15 Connecting to a PC (1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this device. • See “PRODUCT SPECIFICA TIONS” concerning the specifications of this device. . (2) Make sure that the power switch of the personal computer is turned off.
16 Mounting the Speaker Unit INST ALLA TION INSTRUCTIONS (continued) Make sure that the main power switch of the monitor is turned off (standby mode or the indicating lamp: of f/red) when r emoving or connecting the speaker cables. CA UTION Make sure to use the speaker systems fastened with the speaker holders and the screws.
17 Mounting the Speaker Unit (continued) INST ALLA TION INSTRUCTIONS (continued) 4. Attach the speaker cables to speaker systems. Connect the copper colored wire to the Red side.
NOTE About the fixing screw for the Side Input • The screw for fixation is attached with the tape on the holder as shown below . 18 Mounting the Side Input INST ALLA TION INSTRUCTIONS (continued) With the speaker unit 1. Mount the side input into the speaker holder .
19 INST ALLA TION INSTRUCTIONS (continued) Connect the power cord, after completing all other connections. Connect the power cord to this device. Connect the power cord plug to the power outlet. Power Cor d Connection • Use only the power cord pr ovided.
20 BASIC OPERA TION Indicating lamp Main power switch SUB-POWER button POWER button T ur ning Power On and Of f • T o turn the monitor power ON, press the main power switch on the monitor main unit to ON, and then press the SUB POWER button of control panel or the POWER button on the remote control.
21 BASIC OPERA TION (continued) INPUT SELECT button CHANNEL UP/DOWN buttons Input Switching Size Switching • Input can be switched by pressing the A V1~5, RGB1 or RGB2 buttons of the remote control. • Input can be switched to TV by pressing CHANNEL UP/DOWN buttons or PROGRAMME SELECT buttons.
22 V er tical picture position can be adjusted for [Panoramic], [Zoom] , [C14:9L] and [14:9Zoom] mode as follows. 1. Press SIZE button and button during picture size display . 2. Position display will appear . 3. Adjustment range of each picture size ar e as shown below .
23 Audio Mute V olume Adjustment The audio volume can be temporarily muted by pressing the MUTE button of the remote control. The volume can be adjusted by pressing the and buttons of the remote control (or the and volume buttons of the monitor unit).
24 Power Swivel • This feature contr ols the motorized stand. It allows turning the plasma display left or right using the remote control. Make sure that the main power switch of the monitor is turned off when r emoving or connecting the power cord, the connector cables, and the speaker cables.
25 Input Signal Scr een Display The input signal status can be displayed on the screen by pressing the RECALL button of the remote control. • The displays in TV/Video/RGB mode will go out in appr oximately 6 seconds. • The display in DTT mode will also appear as changing the channels and go out in approximately 60 seconds.
26 Displaying MUL TI PICTURE If the MUL TI PICTURE button on the remote control is pressed, multi pictures will display . And then three types of the screen can be selected by pressing the MUL TI MODE button on the remote control. The multi picture mode will change in the following sequence each time the MUL TI MODE button is pressed.
27 Activating the Split mode from the video input screen Pressing the MUL TI PICTURE button once will display 2 pictures. • The speaker icon can be shifted left and right by pressing the and button. The audio of the video will be output from the side on which the speaker icon is located.
28 FREEZE button Pictur e Fr eezing When the FREEZE button on the remote control is pressed, the screen transfers into the freeze mode. • There ar e two types of freezing scr een mode, Split and Strobe. These ar e possible to select at the “Freeze Mode” setting of the Function Menu.
29 DIGIT AL TERRESTRIAL TELEVISION (DTT) OPERA TION MENU button RECALL button CURSOR button ( , , , ) OK button RETURN button Using the Menu Scr een (On-scr een display system) When the MENU button on.
30 Installing the Channels Initial T uning When you turn the power on for the first time, it will be in the DTT mode. The first menu screen asks you to start “automatic search” to tune in the channels. The dialogue box appears as shown. Press “Y es” to start automatic search.
31 Changing the Channels Stepping through the Channel Press CHANNEL UP/DOWN button to switch the next or pr evious channel on the list. Information banner is displayed ever y time channel is switched.
32 Editing the Channels 1. Press MENU button on the r emote control. 2. Select “Channel List” on the main menu. 3. T o edit the channel, highlight the requir ed channel with button. 4. Then, select one of the buttons at the bottom of screen depending on the needs using button.
33 Digital T eletext T eletext can provide various information with text on the screen. • Press to access. Press it again to r eturn to the normal screen. • Y ou can also access to T eletext screen by pr essing RED button, depending on the programme being br oadcast.
34 Electronic Pr ogramme Guide (EPG) Like the Channel Lists, the EPG screen displays a list of the stor ed channels along with information on what programmes are being br oadcast.
35 Setting Timer and Pr ogramme Reminder DIGIT AL TERRESTRIAL TELEVISION (DTT) OPERA TION (continued) Event Timer Event Timer is available to recor d multiple programmes. 1. Press MENU button on the r emote control. 2. Select “Timers” fr om the main menu.
36 DIGIT AL TERRESTRIAL TELEVISION (DTT) OPERA TION (continued) Configuring the Setting Setting Audio and Subtitle Language The available audio and subtitle languages can be configured in user's prefer ence. Audio Language 1. Press MENU button on the r emote control.
37 Configuring the Setting (continued) The DTT can be upgraded via the configuration menu. 1. Press MENU button on the r emote control. 2. Select “Configuration” fr om the main menu. 3. Select “Receiver Upgrade” . 4. Press button to select “Automatic Download” along with “Enabled” .
38 TV SETUP OPERA TION MENU button RECALL button CURSOR button ( , , , ) OK button RETURN button Using the Menu Scr een (On-scr een display system) When the MENU button on the remote control or contro.
39 Picture Audio Tim er Function Setup Select OK Set Setup Auto T uning Manual T uning Fine T uning Sort T eletext Language Auto Off Off Scart Output TV Select Set Return OK Setup Auto T uning Manual .
40 SETUP MENU (TV mode) (continued) Selected characters Setup hint Select the country name by and button and press OK button. • If some requir ed stations could not be preset in this auto tuning function, select and preset the requir ed station in the requir ed position by the manual tuning operation.
41 SETUP MENU (V ideo mode) Picture Audio Tim er Function Setup Select OK Set Setup System System 1 Colour System Video Input Scart Output Monitor RGB1 D VI-STB RGB2 Component HDTV Select Set Return O.
42 SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB)) MENU Picture Audio Tim er Function Setup Select OK Set Setup Auto Adjust Adjust Horizontal P osition 0 V er tical Position + 31 Horizontal Clock –.
43 Movie PC DVI-PC DVI-STB RGB Component Auto HDTV SDTV/DVD Off On Selected characters Setup hint V ertical Filter Frequency Mode RGB1 RGB2 (1st step) RGB2 (2nd step) T urn On when concer ned about screen flicker . Set to Movie when viewing moving images on a personal computer .
44 FUNCTION MENU MENU Picture Audio Tim er Function Setup Select OK Set Function Screen Sav er Off Screen Wipe On 60Min. Black Side P anel Off Video P ow er Sav e Off F reeze Mode Split Default Zoom P anoramic P anel Life Nomal Luminance Manager Off Reset Reset Select Set Return Off 5Min.
45 MENU Picture Audio Tim er Function Setup Select OK Set Picture Picture Mode Dynamic Contrast +31 Brightness -31 Colour 0 Sharpness +15 Hue 0 Color T emperature Normal Contrast Mode Normal Reset Res.
46 PICTURE MENU (TV/V ideo mode) (continued) Selected characters Picture Mode Setup hint Dynamic: This setting is best for very bright ambient lighting. Natural: This setting is for normal lighting conditions. Cinema: This setting is best for watching movie.
47 PICTURE MENU (TV/V ideo mode) (continued) Selected characters Colour Management Setup hint T urn On when the original balance of each colour is required to adjust depending on the user’ s preference. This adjusts listed colours individually to make them either deeper or more pur e.
48 MENU Picture Audio T imer Function Setup Select OK Set Picture Contrast : + 31 Brightness : – 31 Colour : 0 Hue : + 31 Picture Enhancement : Off Colour T emperature : Normal Colour T emp .
49 AUDIO MENU MENU Picture Audio Tim er Function Setup Select OK Set Audio Audio Mode : Movie T reb le : + 10 Bass : – 10 Balance : 0 L R Dynamic Bass : Middle Matrix Surround : Off P erfect V olume.
50 TIMER MENU MENU Picture Audio Tim er Function Setup Select OK Set Timer Off T imer : 30Min. On T imer : - - : - - Select Adjust Return Selected characters Off Timer On Timer - - ( : - - ) hours (- - : ) - - minutes Setup hint This function automatically sets the power to standby status when the indicated time period has elapsed.
51 Picture Mode Contrast Brightness Colour Sharpness Hue Colour T emperature Contrast Mode YNR CNR Film Mode P AL Comb Filter LT I CTI Black Enhancement Auto Colour Colour T emp.
52 A2 / NICAM / Sound Multiplex (TV mode) • The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no ef fect. BILINGUAL / DUAL sound broadcast When bilingual programme is received, sound mode display appears in yellow as shown on right.
53 OTHER FUNCTIONS (continued) Power Save Mode When the RGB1, RGB2 input is selected • When this unit is connected to a VESA DPMS computer , the Power Save (Off) mode can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit.
54 OTHER FUNCTIONS (continued) DVD Player/STB Selection (continued) Set up hint Example) HIT ACHI DVD T o operate HIT ACHI DVD player , press and hold the button, followed by the button. 1. Set up the maker . Press button to indicate the DVD LED on the remote control.
55 44 TROUBLESHOOTING Symptoms That Seemingly Appear to be Failur es Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorr ected, contact your dealer . Customer servicing can be hazardous. W ARNING Symptom Point to check See page • No picture with the power -indicating lamp off.
56 TROUBLESHOOTING (continued) Symptoms That Seemingly Appear to be Failur es (continued) Symptom Point to check See page • If the direct fr equency from the computer is below 85Hz, try a higher frequency (upper limit 85Hz). Ther e may be a slight attenuation of the current image.
57 TROUBLESHOOTING (continued) Actions to Corr ect Abnor mal Displays Depending on the kind of system equipment used, images may not be displayed normally .
58 P AL B, G, H / I / D, K SECAM B, G / K1 / L, L ’ / (D, K)* 2 DVB-T* 3 OUTPUT (MONITOR): composite video monitor -output terminal (RCA) OUTPUT (MONITOR): L/R audio monitor - output terminal (RCA) .
Pin Input signal Pin Input signal 1 T .M.D.S. Data2- 14 +5V Power 2 T .M.D.S. Data2+ 15 Ground (for+5V) 3 T .M.D.S. Data2/4 Shield 16 Hot Plug Detect 4 T .M.D.S. Data4- 17 T .M.D.S. Data0- 5 T .M.D.S. Data4+ 18 T .M.D.S. Data0+ 6 DDC Clock 19 T .M.D.S.
60 D-sub Applicable video signals for input terminal With composite input(A V1~A V4 input) and S-video input (A V1, A V4 input) With component input (A V3 and RGB2-component input) * 1 720p/50 is supported A V3 only .
74.25 EIA-861B 8 720p/50 1280 x 720 50.00 37.50 74.25 EIA-861B 9 720p/60 1280 x 720 60.00 45.00 61 PRODUCT SPECIFICA TIONS (continued) Recommended Signal List (continued) With Digital signal input (RGB1 input) 1 640 X 400 70.08 31.47 25.18 쑗 2 640 X 480 59.
62 PRODUCT SPECIFICA TIONS (continued) Recommended Signal List (continued) With Analogue signal input (RGB2 input) No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 .
63 Thank you for purchasing this Hitachi T elevision. In the unlikely event that this product should develop a fault, we undertake to repair or replace any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that .
NOTE: The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. TRADEMARK ACKNOWLEDGEMENT VGA and XGA are registered trademarks of International Business Machines Corporation.
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105 - 8430, Japan.
Een belangrijk punt na aankoop van elk apparaat Hitachi 42PD7500 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Hitachi 42PD7500 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Hitachi 42PD7500 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Hitachi 42PD7500 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Hitachi 42PD7500 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Hitachi 42PD7500 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Hitachi 42PD7500 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Hitachi 42PD7500 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
