Gebruiksaanwijzing /service van het product AX-M140 van de fabrikant Hitachi
Ga naar pagina of 29
.
- 1 - Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. T able of Contents Be fo re Co nn ec ti on ...........................................................
- 2 - * Player is CD-R, CD-RW compatible Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are correctly treated. * Region Management Information This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc.
- 3 - Laser Product This product is equipped with low power laser equipment inside. For your safety, don’t take apart any covers or try to take apart the product inside.
- 4 - DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
- 5 - Connection Caution: Please turn off all the equipment power before connecting. Connect to the TV Connecting diagram Safety precautions Some settings should be made for the unit according to the TV connection. * According to the colour system setting of TV, select the colour system in the “TV Display” function setting.
- 6 - Connecting Control Cable With the unit unplugged from the mains connect the power control cable to the DVD player, MP3 player, the amplifier and the radio via the connec- tions on the rear of the units as shown .
- 7 - Connecting to a PC The AX-M140 can be connected to a PC via the USB (B) Port on the rear of the unit. Music files on your PC can then be transferred to the Music bank for storage and play back through the AX-M140 Hi- Fi.
- 8 - The DAB / FM RADIO 1. DAB/FM Switch 2. Information 3. VFD Display Lens 4. Number Buttons 5 . Confirm Select Down Select Up 6. DAB/FM Antenna Jack 7. Control Cable Connector The MP3 Player 1. File Copy 2 . Record 3. CD-SYNC Record 4. VFD Display Lens 5.
- 9 - Remote control 6. Clock Dimmer (In standby mode) Loudness 7. Preset Equalizer 8. V olume Up 9. Fast Reverse Menu Select Down 10. V olume Down 1 1 . Previous Information 12. Play/Pause Menu Confirm 13. Repeat 14 . Number 15. Direction ( ) 16. Enter Button 17.
- 10 - Installation of Batteries in the Remote Control 1. Remove the battery compartment cover. 2. Insert two batteries (size AAA) correctly , so that the + and - polarities match the polarity diagrams in the battery compartment. * About half a year of normal operation can be expected when using standard batteries.
- 11 - Press the stop/return button ( L ) to stop playing, the unit will store the last playing time in the memory automatically, then press the play/pause button ( BF ), the unit will resume to last memory time and continue playback automatically. If you press the stop/return button ( L ) twice to stop the disc playing.
- 12 - Load a Video CD, disc in PBC OFF mode (the MENU button turns the PBC function ON/ OFF). Y ou can select tracks or chapters with the number buttons (0/10,1-9,10+). * If the track or chapter number is less than 10, press the number buttons 0/10,1-9.
- 13 - l When playing a the Video CD, you can choose MONO (Mono Left, Mono Right), “STEREO” or “Mix-Mono” audio output by pressing vocal mode select button ( AUDIO ). l When playing DVD disc recorded with several languages, you can repeatedly press the language select button ( AUDIO ) to select one of language to play.
- 14 - l When playing CD disc, press the intro button ( INTRO ) to play the beginning of each track consecutively. The playing time of each track is 10 seconds. l When playing a Video CD disc (except for CD disc), press the intro button ( INTRO ) to enter the thumbnail function, the menu will displayed on the TV screen.
- 15 - General Setup Page TV Display This menu allows the user to select the aspect ratio of the TV to be connected. Angle Mark Available only when the disc is recorded with angle marks, you can set the angle mark to show on the TV screen or not. OSD Language This menu allows the user to select the language for the on-screen display.
- 16 - Preference Page Audio, Subtitle, Disc Menu Y ou can select subtitles, dif ferent audio tracks and languages in this menu, if available. Parental Setup this system when playing a disc which has age control.
- 17 - Note: When playing a picture CD, press the L button to enter the “Thumbnail Mode”, use the , , , buttons to move the cursor to illuminate the “MENU” then press the ENTER button to enter the “Remote Key Function” list. l Y ou may need use the K button on the unit to stop playing and open the disc tray .
- 18 - w w w w w Scrolling Text The bottom line displays transmitted text giving information regarding the tuned station transmission. w w w w w Storing Stations on Preset Buttons 0-9 If a preset button is pressed and held for at least 2 seconds, then that assigns the current station to the selected preset.
- 19 - w w w w w INFO Button (Unit and Remote) If the INFO button is held down for more than 2 seconds, then this causes the advanced information display to be shown. When the info button is clicked or held subsequently, then the info display returns to the start of the cycle.
- 20 - FM Radio w w w w w System Reset T o reset switch off, then back on at mains supply . Press and hold “ CONFIRM ” knob/button and press “ ST ANDBY ”. Continue to hold “ CONFIRM ” until the unit displays “System Reset”. FM Radio will go into scan mode.
- 21 - w w w w w Signal Quality The bottom line displays a graphical representation of the signal quality of the station currently being demodulated. Poor signal quality… Good signal quality… This display will be continuously updated so that the user can use it to position the radio to obtain the best reception.
- 22 - Press the G button once or more to skip forward one or more tracks. (Y ou can also operate the key “ G ” on the panel of MP3 player .) l In playing mode, you can have the hard disk or USB device played in a random order by pressing the RANDOM button.
- 23 - Recording 1. Before recording, please firstly confirm whether the menu is setup to the record setting you need. 2. Place the disc on the disc tray correctly and press play. Press the REC button ( REC ) to select the record mode, the “REC TO HARD DISK” will be displayed on the VFD.
- 24 - WMA files “can” have DRM protection. In this case the file content is encrypted with a key. For playback and decoding it is necessary to have DRM license files on your computer. DRM license can limit your rights for using these functions. For instance, it can allow only play- back and prohibit conversion into other formats.
- 25 - Setting the Daily Timer l In standby mode, you can use the daily timer setting to turn the unit on automatically at a certain time everyday under standby mode. When the setting timer is on, the timer indictor “ ” will display on the VFD, however the clock must be set correctly for the timer function to work.
- 26 - Protect the Disc 1. T o keep the disc clean, please don’t touch the disc’s surface when you are holding it. Y ou should hol d the edge. 2. If the disc is dirty, it will affect the sound quality. Please use the clean and soft cloth to wipe the disc from inside to outside.
- 27 - Specification System Pow er sup ply ............................................................. ~230V / 50 H z Rated working power consumption .. ... ... .... .. ... ... .. ... . £ 130W C ha n n el ...........................................
Partmaster Direct can provide accessories, spares, batteries and replacement parts with Next Day Delivery available upon request. Please call: 0870 600 1338 (UK customers only) Calls charged at National Rate …or visit our website at www.partmaster.co.
Een belangrijk punt na aankoop van elk apparaat Hitachi AX-M140 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Hitachi AX-M140 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Hitachi AX-M140 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Hitachi AX-M140 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Hitachi AX-M140 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Hitachi AX-M140 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Hitachi AX-M140 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Hitachi AX-M140 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
