Gebruiksaanwijzing /service van het product CP-X615 van de fabrikant Hitachi
Ga naar pagina of 44
1 Projector CP-X705/CP-X615 User's Manual (detailed) Network Guide Thank you for purchasing this projector . This projecto r has the net work function that brings you the follo wing main fea tures. ►Before using this product, be sure to read all manuals for this product.
2 Content Content About this manual .......................................................................... 1 Content .......................................................................................... 2 1. Main functions ...............
3 1. Main functions 1. Main functions 1.1 Conguring and controlling via a web browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. Logon the network from the web browser and it offers the menus to congure the network settings, monitor the projector and so on.
4 2. Equipment connection and network setting 2.1 R equired equipment pr eparation 2. Equipment connection and network setting The following equi pments are requir ed to connect th e projector to your PC through the network.
5 2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator . Next, please check the PC setting as explained below .
6 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 7) Set IP address, subnet mask and default gateway for PC. Fig. 2.2.2.d “Internet Protocol (TCP/IP) Properties” window 5) Open “Local Area Connection Properties” window you use for network device.
7 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector ’s one.
8 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2) Click “Connections” tab and then click [LAN Settings] button to open “Local Area Network (LAN) settings”. (Fig. 2.2.3.c) Fig. 2.2.3.b “Internet Properties” window 2.
9 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) Fig. 2.2.4 “Logon Menu” 2.2.4 Check connection Check PC and projector are connected properly here. If it is not connected, check cable connections and settings are properly or not.
10 3. Management with Web browser softw are Conguring and Controlling the Pr ojector via a W eb Browser Y ou can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network.
1 1 3. Management with Web browser softw are 3.1 Conguring and controlling the pr ojector via a web browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. • Internet Explorer 5.
12 3. Management with Web browser softw are When conguring or controlling the projector via a web browser , an ID and password are required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs .
13 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.1 Logon Refer to the follo wing for conguring or controlling th e projector via a web browser . 1) Enter “h ttp://19 2.168.
14 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.2 Network Infor mation All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID.
15 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.3 Network Settings Displays and congures network settings. Item Description IP Conguration Congures network settings.
16 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are • The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection.
17 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and congures communication port settings. Item Description Network Control Port1 (Port:23) Congures command control port 1 (Port:23).
18 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.5 Mail Settings 3. Management with Web browser softw are Displays and congures e-mail addressing settings. Item Description Send mail Click [Enable] check box to use the e-mail function.
19 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.6 Aler t Settings Displays and congures failure & alert settings. Alert Item Description Cover Error The lamp cover has not been properly xed. Fan Error The cooling fan is not operating.
20 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are The Alert Items are shown below . Setting Item Description Alarm Time Congures the time to alert. (Only Lamp T ime Alarm and Filter T ime Alarm.
21 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.7 Schedule Settings Displays and congures schedule settings. Item Description Daily Congures the daily schedule. Sunday Congures the Sunday schedule. Monday Congures the Monday schedule.
22 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are The daily and weekly event items are shown below . Item Daily & Weekly Description Schedule Click [Enable] check box to enable the schedule.
23 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.8 Date/Time Settings Displays and congures the date and time settings. Item Description Current Date Congures the current date in year/month/day format.
24 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are Item Description Time difference Congures the time difference. Set the same time dif ference as the one set on your PC. If unsure, consult your IT manager .
25 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.9 Security Settings Displays and congures passwords and other security settings. Item Description Administrator authority Congures the Administrator ID and password.
26 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are Click [Apply ] button to save the settings. • The new conguration settings are activated after restarting the network connection.
27 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.10 Projector Contr ol Controls the projector . Item Description Main Power T urns the power on/off. Input Source Selects the input source.
28 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are Item Description Image Aspect Selects the aspect setting. Over Scan Adjusts the over scan setting. V Position Adjusts the vertical position.
29 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are Item Description Audio V olume Adjusts the volume setting. T reble Adjust the T reble setting. Bass Adjusts the Bass setting. SRS WOW Selects the SRS WOW setting.
30 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.11 Projector Status 3. Management with Web browser softw are Displays and congures the current projector status. Item Description Error Status Displays the current error status Lamp Time Displays the usage time for the current lamp.
31 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are 3.1.12 Network Restar t Restarts the projector ’s network connection. Item Description Restart Restarts the projector ’s network connection in order to activate new conguration settings.
32 3. Management with Web browser softw are 3.2 E-mail Aler ts The projector can automatically send an alert message to the specied e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error .
33 3.2 E-mail Alerts (continued) 3. Management with Web browser softw are 8) Click [Alert Settings] on the main menu to congure the E-mail Alerts settings. 9) Select and congure each alert item. Refer to the item 3.1.6 Alert Settings ( 19 ) for further information.
34 3. Management with Web browser softw are 3.3 Projector Mana gement using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.
35 3. Management with Web browser softw are 3.4 Ev ent Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector . • Y ou can schedule the following control events: Power ON/OFF , Input Source and T ransferred Image Display .
36 3. Management with Web browser softw are • In Standby mode the power indicator will ash green for approx. 3 seconds when at least 1 “Power ON” schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ].
37 3. Management with Web browser softw are • A Network Restart is required after the Daylight Savings Time or SNTP conguration settings have been changed. • The battery for the built in clock may be dead if the clock loses time even when the date and time have been set correctly .
38 3. Management with Web browser softw are 3.5 e-SHO T (Still Image T r ansfer) Display The projector can display still images that are transferred via the network. • It is possible to allocate the image le up to 4 in the maximum. • The image le also can be displayed by using schedule function from the web browser .
39 3.5 e-SHOT (Still Image Transfer) Display (continued) Congure the following items from a web browser when e-SHOT is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser .
40 3. Management with Web browser softw are 3.6 Command Control via the Networ k Y ou can congure and control the projector via the network using RS-232C commands.
41 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) When the authentication setting is enabled, the following settings are required. ( 25 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password.
42 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) Command F or mat Command formats differ among the dif ferent communication ports. ● TCP #23 Y ou can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands.
43 R eply Data for mat The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data.
44 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) Automa tic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. The projector does not accept commands without authentication success when authentication is enabled.
Een belangrijk punt na aankoop van elk apparaat Hitachi CP-X615 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Hitachi CP-X615 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Hitachi CP-X615 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Hitachi CP-X615 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Hitachi CP-X615 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Hitachi CP-X615 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Hitachi CP-X615 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Hitachi CP-X615 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
