Gebruiksaanwijzing /service van het product HDPJ52 van de fabrikant Hitachi
Ga naar pagina of 70
1 ENGLISH Projector HDPJ52 User’ s Manual – Oper ating Guide Thank you for purchasing this projector . ► Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product.
2 Content Content Before use ................................................................................ 4 Projector features ......................................................................................... 4 About this manual ..........
3 ENGLISH Content (EASY MENU) ......................................................................... 30 EASY MENU functions ............................................................................... 31 ASPECT ..................................
4 Before use Before use Projector features This projector is used to project computer and NTSC/P AL/SECAM video signals onto a screen. It requires only a small amount of space for installation and projects a large image from even a short distance. The following features will turn any room into a High Definition Theater .
5 ENGLISH About contents of package Y our projector should come with the items shown below . Check to make sure that all the items are included. Contact your dealer immediately if anything is missing. Before use (1) Projector .........................
6 Before use Par t names Projector Exhaust vent ► Do not block or cover the projector's vents. ► T o avoid being burnt, please do not touch areas near the vents while the projector is in use or immediately after use. Lens ( 9, 60 ) A bright light for projecting is emitted from the lens.
7 ENGLISH Before use Control buttons POWER indicator ( 20, 23, 62 ) This indicator blinks while the projector is cooling down or warming up ► Note that a lit or blinking red indicator denotes a problem. TEMP indicator ( 62 ) ► Note that a lit or blinking red indicator indicates a problem.
8 POWER button ( 20, 23 ) Used to turn the power on and off. Before use R emote contr ol BLACK button ( 27 ) Used to select a BLACK mode. Each mode adjusts the black setting to suit different conditions. ASPECT button ( 24 ) Used to select an aspect ratio.
9 ENGLISH 1. Fix the strap to the lens cover strap ring. 2. Put the strap into the groove on the rivet. 3. Press the rivet into the strap hole. 4. Put the lens cover on the lens of the projector . Prepar ations Preparations F astening the lens co v er Fasten the lens cover to the projector using the included strap to prevent it from becoming lost.
10 Prepar ations Ar rangement On a horizontal surface Arrange the projector according to the manner in which you will use the projector and the environment the projector will be used in. Suspended from the ceiling ► Place the projector in a stable, horizontal position.
1 1 ENGLISH Prepar ations Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated (±10%) for a full size screen at 1280x720. For 16:9 screens For 4:3 screens (a) Screen size (b) Projection distance (c) Screen height min.
12 Prepar ations Adjusting the projector’s ele va tion The elevator feet can be used to make adjustments if the surface on which the projector is set is uneven or if the proj ection angle needs to be ot herwise adjusted. The adjustment range of the elevator feet is 0 to 7 degrees.
13 ENGLISH Y C B /P B C R /P R COMPO NE NT VIDEO S-VIDE O VIDE O COMPUTER CONTRO L HDMI TRIGGE R Y C B /P B C R /P R Component video Out Component cable Y C B /P B C R /P R COMPONENT VIDEO S-VIDEO VID.
14 Y C B /P B C R /P R COMPON E NT VID EO S-VI DE O VIDEO COMPUTER CONTRO L HDMI TRIGGE R DVI-HDMI cable DVI Out Y C B /P B C R /P R COMPONENT VID EO S-VIDEO VIDEO COMPUTER CONTROL HDMI TRIGGER HDMI cable HDMI Out Prepar ations F or an HDMI signal source ► T urn off all devices prior to connecting them to the projector .
15 ENGLISH Y C B /P B C R /P R COMPONENT VIDEO S-VIDEO VIDEO COMPUTER CONTROL HDMI TRIGGER RGB Out RGB cable RS-232C RS-232C cable Prepar ations W ith a computer • Be sure to tighten the screws on connectors to secure. • Use only an HDMI cable marked with the HDMI logo for HDMI connections.
16 Prepar ations Computer signal examples Resolution (HxV) H. frequency (kHz) V . frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VESA VGA (75Hz) 640 x 480 43.
17 ENGLISH Prepar ations Connecting the pow er supply Before connecting the power , make sure that the power switch is in the OFF position (the side marked “O”). 1. Connect the power cord connector to the projector ’s AC inlet. 2. Plug the power cord's plug firmly into a power outlet.
18 Prepar ations Loading batteries into the remote control Please load the batteries before using the remote control. If the remote control starts to malfunction, replace the batteries. If you will not use the remote control for an extended period, remove the batteries from the remote control and store them in a safe place.
19 ENGLISH 30° 30° Prepar ations Using the remote contr ol The remote control works with the projector ’s remote sensor . The range of the remote sensor is 60-degrees (30-degrees to the left and right of the remote sensor) within 3 meters. The remote signal may also be able to be reflected off the screen etc.
20 1. Make sure that the power cord is firmly and correctly connected to both the projector and power outlet. 2. Open the lens cover , and set the power switch to the ON position. The power indicator w ill light a steady orang e. The n wait several seconds because buttons may not function for the first several seconds the projector is turned on.
21 ENGLISH POWER LIGHT BLACK ASPECT MENU BRIGHT CONTRAST COLOR IRIS MODE MEMORY ENTER RESET HDMI PC AUTO COMPO S-VIDEO VIDEO 1. T o switch between input ports, press the INPUT button on the projector . Each time the button is pressed, the projector will switch between input ports as follows.
22 1. Use the vertical lens shift dial to shift the picture upward or downward. 2. Use the horizontal lens shift dial to shift the picture left or right. Projection Adjusting the display position The lens of this projector can be shifted horizontally and vertically to adjust the display position using the lens shift dials.
23 ENGLISH Magnify 1. Press the ST ANDBY/ON button on the projector or the POWER button on the remote control. The message "Power off?" will appear on the screen for approximately 5 seconds.
24 Basic operation Basic operation The following functions are basic and useful. They can also be easily accessed using the remote control. Some functions display dialogs to aid you. Although the dialogs automatically close after several seconds, the dialogs can be deactivated using the MESSAGE function in the SCREEN menu ( 49 ).
25 ENGLISH 1. Press the IRIS button. The projector will display a dialog to aid you in adjusting the iris. Basic operation IRIS 2. Use the ▲/▼ cursor buttons to adjust the iris. 3. T o close the dialog and end the operation press the IRIS button again.
26 Basic operation 1. Press the MODE button. Each time the button is pressed the mode will change and a dialog indicating the selected mode will be displayed. MODE MODE refers to modes that are a combination of the GAMMA ( 37 ), COLOR TEMP ( 39 ), and IRIS ( 41 ) settings as shown in the table below .
27 ENGLISH Basic operation 1. Press the BLACK button. Each time the button is pressed the mode will change and a dialog indicating the selected mode will be displayed. BLACK BLACK refers to the auto iris control modes as shown in the table below . The auto iris is automatically controlled to adjust the black level according to the mode selected.
28 Basic operation MY MEMOR Y This projector provides 4 memories to save user adjustment settings. The brightness, contrast, color , tint, sharpness and iris adjustment settings, and selected modes for gamma, color temperature, black, whisper and digital shutter can be saved to each memory .
29 ENGLISH Basic operation T o sav e adjustment settings Note that if the MESSAGE function ( 51 ) is inactive, the following procedure cannot be performed and the projector will load saved adjustment settings as soon as the MEMORY button is pressed.
30 EASY MENU EASY MENU This projector has variou s functions intended to improve pictu re quality . The EA SY MENU provides quick and easy access to the most useful of these functions. 1. T o display a menu when no menu is currently displayed Press the MENU button and a menu will be displayed.
31 ENGLISH EASY MENU 5. T o operate the selected item Use the ◄/► cursor buttons to operate the item. For details please see the following descriptions. 6. T o reset the operation Press the RESET button while the item is selected. (Does not reset the LANGUAGE item.
32 EASY MENU Item Description MODE Using the ◄/► cursor buttons changes the mode which is a combination of the GAMMA ( 37 ), COLOR TEMP ( 39 ) and IRIS ( 41 ) settings as explained below .
33 ENGLISH EASY MENU Item Description BRIGHTNESS Using the ◄/► cursor buttons adjusts the picture. Darker Brighter - NOTE - • The BRIGHTNESS function can also be accessed using the BRIGHT buttons on the remote control ( 27 ) or via the PICTURE menu in the Advanced Menu ( 37 ).
34 EASY MENU Item Description RESET Using this function resets all items in the EASY MENU except the LANGUAGE item. Pressing the ► cursor button displays a confirmation dialog. T o reset press the ▼ cursor button. LANGUAGE Using the ◄/► cursor buttons changes the display language.
35 ENGLISH Advanced Menu Advanced Menu The Advanced Menu provides access to advanced features, grouped into 6 sub- menus (PICTURE, IMAGE, INPUT , SETUP , SCREEN and OPTION) for more precise picture control. 1. T o display a menu when no menu is currently displayed Press the MENU button and a menu will be displayed.
36 Advanced Menu 4. T o select a menu (1) If the yellow highlight bar is in the right column of the Advanced Menu, press the ◄ cursor button to move the yellow highlight bar to the left column. (2) Move the yellow highlight bar onto the title of the menu you want to select using the ▼/▲ cursor buttons.
37 ENGLISH Advanced Menu (PICTURE menu) PICTURE menu The following functions are accessible via the PICTURE menu. After selecting an item according to the procedure described in the preceding “Advanced Menu operation” section ( 35 ), refer to the following table for details on operating the selected item.
38 Advanced Menu (PICTURE menu) Item Description Continuation of "GAMMA" T o adjust a CUSTOM mode (1) Select one of the CUST OM modes to adjust using the ▲/▼ cursor buttons. Then press the ► cursor button to display the CUSTOM dialog. (2) Select the base mode to be adjusted using the ▲/▼ cursor buttons.
39 ENGLISH Advanced Menu (PICTURE menu) Item Description COLOR TEMP This projector provides 4 pre-set modes and 4 custom color temperature modes. T o select a mode Using the ▲/▼ cursor buttons in the COLOR TEMP menu changes the color temperature mode.
40 Advanced Menu (PICTURE menu) Item Description Continuation of "COLOR TEMP" (3) Pre ssing the ENTER butt on while the dialog is displayed display s a test pattern to aid in adjusting. This projector has 3 types of test pattern. Each time you press the ENTER button, the test pattern is changed.
41 ENGLISH Advanced Menu (PICTURE menu) Item Description IRIS Using the ▲/▼ cursor buttons adjusts the picture. Bright Dark - NOTE - • The IRIS function can also be accessed using the IRIS button and ▲/▼ cursor buttons on the remote control ( 25 ).
42 Advanced Menu (PICTURE menu) Item Description Continuation of "MY MEMORY" T o save adjustment settings (1) Load a base memory using the ▲/▼ cursor buttons in the MY MEMOR Y menu (small). When you want to use the current adjustment, do not load any other memories.
43 ENGLISH Advanced Menu (IMAGE menu) IMAGE menu The following functions are accessible via the IMAGE menu. After selecting an item according to the procedure described in the preceding "Advanced Menu operation" section ( 35 ), refer to the following table for details on operating the selected item.
44 Item Description V POSITION Using the ▲/▼ cursor buttons adjusts the vertical position of the picture. Up Down - NOTE - • The V POSITION cannot be adjusted for signals from the HDMI port. H POSITION Using the ▲/▼ cursor buttons adjusts the horizontal position of the picture.
45 ENGLISH Advanced Menu (INPUT menu) INPUT menu The following functions are accessible via the INPUT menu. After selecting an item according to the procedure described in the preceding "Advanced Menu operation" section ( 35 ), refer to the following table for details on operating the selected item.
46 Advanced Menu (INPUT menu) Item Description COMPONENT Using the ▲/▼ cursor buttons changes the COMPONENT port mode. COMPONENT SCART RGB COMPONENT The COMPONENT port works with a component video signal input. SCART RGB The COMPONENT port works with an SCAR T RGB signal input.
47 ENGLISH Advanced Menu (INPUT menu) Item Description S-ASPECT Using the ▲/▼ cursor buttons turns the S-ASPECT function on and off. TURN ON TURN OFF When the S-ASPECT function is enabled S2-video signals can be detected and an optimum aspect ratio automatically selected.
48 Advanced Menu (SETUP menu) SETUP menu The following functions are accessible via the SETUP menu. After selecting an item according to the procedure described in the preceding "Advanced Menu operation" section ( 35 ), refer to the following table for details on operating the selected item.
49 ENGLISH Advanced Menu (SCREEN menu) SCREEN menu The following functions are accessible via the SCREEN menu. After selecting an item according to the procedure described in the preceding "Advanced Menu operation" section ( 35 ), refer to the following table for details on operating the selected item.
50 Advanced Menu (SCREEN menu) Item Description ST ART UP Using the ▲/▼ cursor buttons changes the start up image that is displayed when no signal or an unsuitable signal is detected. MyScreen ORIGINAL TURN OFF MyScreen MyScreen is a feature which allows you to save a screenshot to use in place of the default screen.
51 ENGLISH Advanced Menu (SCREEN menu) Item Description MyScreen Lock Using the ▲/▼ cursor buttons turns the MyScreen Lock function on and off. TURN ON TURN OFF When TURN ON is selected the MyScreen function is locked. Use this feature to protect the current MyScreen image.
52 DIGITAL SHUTTER TURN ON TURN OFF ↓ ↓ → DIGIT AL SHUTTER menu ← (one way) Dia log for the top ba r ↔ D ialo g fo r th e bo ttom bar Digital Shutter :BACK .
53 ENGLISH Advanced Menu (OPTION menu) OPTION menu The following functions are accessible via the OPTION menu. After selecting an item according to the procedure described in the preceding "Advanced Menu operation" section ( 35 ), refer to the following table for details on operating the selected item.
54 Advanced Menu (OPTION menu) Item Description SERVICE The projector has some additional functions as follows. Select an item using the ▲/▼ cursor buttons in the SERVICE menu, and press the cursor ► button. Then a dialog or sub-menu will appear .
55 ENGLISH Advanced Menu (OPTION menu) Item Description Continuation of “SERVICE” (Continuation of “STRIPE”.) - NOTE - • KEYSTONE cannot be adjusted while using the STRIPE .
56 WARNING HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
57 ENGLISH Maintenance A lamp has a finite product life. Using the lamp for long periods of the time could cause the picture to become darker or the color tone to become poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
58 Maintenance (4) Select the “LAMP TIME” item in the right column of the Advanced Menu using the ▲/▼ cursor buttons, then press the ► cursor button and the LAMP TIME menu will appear . (5) Pressing the ▲ cursor button in the menu resets the LAMP TIME.
59 ENGLISH Maintenance 6. Reset the FIL TER TIME in the OPTION menu ( 53 ). (1) Press the MENU button to display a menu. If you are using the Advanced Menu skip the next step (2).
60 Maintenance Inside of the pr ojector In order to ensure the safety of your projector , please have it cleaned and inspected by your dealer about once a year . 1. T urn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down.
61 ENGLISH T roubleshooting T roubleshooting R elated messages When the projector is turned on, the following messages may be displayed. When any such message is displayed on the screen, please follow the instructions described below .
62 POWER indicator LAMP indicator TEMP indicator Description Lit In Orange T urned off T urned off The projector is in a standby state. Please refer to the “T urning the power on” ( 20 ) and “T urning the power off” ( 23 ). Blinking Green T urned off T urned off The projector is warming up.
63 ENGLISH POWER indicator LAMP indicator TEMP indicator Description Blinking Red or Lit In Red T urned off Blinking Red The cooling fan is not operating.
64 Phenomenon Cases not involving a machine defect T roubleshooting Phenomena that may be easily mistak en as machine def ects Before requesting repair , please check the following chart.
65 ENGLISH T roubleshooting Phenomena that may be easily mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect No pictures are output. Colors have a faded-out appearance, or Color tone is poor . Pictures appear dark.
66 Phenomenon Cases not involving a machine defect T roubleshooting Flicker appears on the screen. Projector is very noisy . AUTO1 or AUTO2 is selected for the BLACK mode. Please set the BLACK mode to TURN OFF using the BLACK button ( 27 ) or the BLACK item in the PICTURE menu ( 41 ).
67 ENGLISH Warr anty and after-ser vice / Specifications W arranty and after-service When a problem occurs with the equipment, first refer to “T roubleshooting” ( 62-66 ) and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company .
68 Specifications Dimension diag r am [unit: mm].
69 ENGLISH Glossar y Glossary Entry Explanation Page(s) in which the entry appears 3-2 Pull-Down A system for converting a film source such as a movie into a video signal.
70 Entry Explanation Page(s) in which the entry appears P AL A standard for terrestrial analog broadcasting. Mainly adopted in UK, Germany , China, Australia, et al.
Een belangrijk punt na aankoop van elk apparaat Hitachi HDPJ52 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Hitachi HDPJ52 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Hitachi HDPJ52 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Hitachi HDPJ52 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Hitachi HDPJ52 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Hitachi HDPJ52 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Hitachi HDPJ52 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Hitachi HDPJ52 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
