Gebruiksaanwijzing /service van het product LE42S704 van de fabrikant Hitachi
Ga naar pagina of 60
Thank you for purchasing this Hitachi product. Please read these instructions carefully . For additional assistance please call 800.HIT ACHI (800.448.2244) or visit our website at www .hitachi.us/tv . Keep this owners guide for future reference. Record the model name and serial number of your LCD T elevision for future reference.
2 Impor tant Safety Instr uctions T o the CA TV system insta ller: This reminde r is prov ided to call the CA TV system installer ’s attention to Article 820-44 of the NEC that provi des guideli nes.
3 Impor tant Safety Instr uctions W arning T o reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. • The LCD television should not be exposed to dripping or splashing and no objects lled with liquids, such as vases, should • be placed on the television.
4 Impor tant Safety Instr uctions Congratulations on your purchase! As you enjoy your new product, please keep these safety tips on mind: HIT A CHI CARES! The consumer electronics industry is commited to making home • entertainment enjoyable and safe.
5 Pr ecautions And R eminder s . 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 4 inch Do not place the unit on uneven surfaces, this may drop or damage the unit, it may also cause personal injury . Unplug immediately if any foreign materials falls into the TV or if the TV fell down.
6 A ccessories Check to make sure you have the following accessories before disposing of the packing material. For optional accessories, please access our web site at: www .
FIRST TIME USE 7 Do not block the ventilation holes of the LCD • T elevision . Blocking the ventilation holes might cause overheating and damage. In case of an abnormal symptom, unplug the power • cord and contact 800.HIT ACHI. If you purchased a wall mount bracket, it is • recommended that you ask for professional installation.
8 Ho w T o Install Y our New Hitachi L CD T ele vision W ALL MOUNTING SETUP STEP (1) : REMOVE THE ST AND BASE FROM THE LCD TELEVISION In order to remove the stand from the TV safely , please put the TV set on a soft and at surface (blanket, foam, cloth, etc.
FIRST TIME USE 9 F r ont Contr ols REMOTE CONTOROL Sensor Point your remote control at this area when selecting channels, adjusting volume, etc. LIGHT Sensor This area detects ambient light level for automatic screen brightness control. ACCENT LIGHT The Accent Light illuminates when the TV is turned on.
10 Side/R ear Panel J ac ks COMPONENT/A V : Y -P b P r V ideo and Audio L/R Inputs Component/A V provide Y -P b P r and Audio jacks for connecting device with this capability , such as a DVD player or set top box. Y our component outputs may be labeled Y , B-Y , • and R-Y .
FIRST TIME USE 11 Q uic k R ef erence Remote Control Buttons And Functions In addition to controlling all of the functions on your Hitachi LCD TV , the new remote control is designed to operate different types of devices, such as, DVD Players, cable boxes (CBL), set top boxes, satellite receivers (SA T), VCRs and compatible HDMI CEC DVD Players.
12 Quic k Setup Guide a). Secure it with the Wire Clamp (see page 7) . Wire Clam p b). Connect the power cord to the AC outlet. c). The Indicating Lamp will light red (Standby mode) and then light blue (picture is shown). 2. CONNECT YOUR NEW HIT ACHI LCD TV TO THE POWER SOURCE 3.
FIRST TIME USE 13 TV Setup W izar d Setup Wizard (5/8) Please select TV RF tuning band ... Move Select SEL Air Cable Previous Cancel The sixth step will start the scanning feature to nd the channels available on the antenna or cable system. Press the SELECT button on the remote control to start the channel scan.
14 Side P anel Connections The following connection diagrams are offered as suggestions. However , you may need to modify them to accommodate your particular assortment of devices and features. For best performance, video and audio cables should be made from coaxial shielded wire.
FIRST TIME USE 15 Side P anel Connections CONNECTING A DEVICE WITH HDMI OR DVI CAP ABILITY TO HDMI 1/DVI, HDMI 2 ~ HDMI 4 Connect the HDMI or DVI to HDMI connection cable from the 1. output of the HDTV set top box or DVD player to the HDMI input as shown near the side panel at right.
16 R ear Panel Connections Cables are not included. NOTE TIPS ON REAR P ANEL CONNECTIONS COMPONENT Y -PbPr connection is provided for high performance DVD players, VCRs etc. that have this feature. Use these connections ♦ in place of the standard video connection if your device has this feature.
FIRST TIME USE 17 Completely insert the connection cord plugs when connecting to rear panel jacks. If you do not, the picture and/or sound • may be abnormal. Cable plugs are often color-coded. Match colors of plugs and jacks, i.e. connect red to red, white to white, etc.
18 T he Remote Control POWER Button Press this button to turn the TV set on or of f. DEVICE Buttons In addition to controlling all the functions on your Hitachi LCD TV , the new remote control is designed to operate different types of VCRs, cable boxes, set top boxes, satellite receivers, DVD players, and other audio/video device with one touch.
19 REMO TE CONTROL Ho w T o Use T he R emote Control T o Contr ol Y our TV Closed Captioning will display automatically when MUTE is on and Closed Caption is set to With Mute (see page 37). When the TV power is turned off at a volume level 21 or greater , the volume level will default to 20 when the TV is turned on.
20 Ho w T o Use T he R emote Control T o Contr ol Y our TV Auto Use this aspect mode to have the aspect mode change automatically by signal detector . 4:3 Use this aspect mode to display conventional (4:3) images. Side panels (black areas) are placed to the left and right of the image to preserve the original aspect ratio of the source.
21 REMO TE CONTROL ENERGY SA VE (E.SA VE) Button Use this button to choose power consumption reduction settings based on 3 levels (Min, Medium, Max). See page 37 for further details.
22 CLU-49101S 1 Power Button Device Buttons Numeric Buttons 2 3 Ho w T o Use T he R emote Control T o Contr ol Y our A V Device NOTES If your A V device cannot be operated after performing the above procedures, your A V device code has not been • preprogrammed into the remote control.
23 REMO TE CONTROL Ho w T o Use T he R emote Control T o Contr ol Y our A V Device MY CABLE BO X CODE IS: _____________________ Refer to the instruction manual of the cable box for operation of the buttons exclusively for the cable box.
24 Ho w T o Use T he R emote Control T o Contr ol Y our A V Device MY D VD PLA YER CODE IS: _____________________ Refer to the instruction manual of the DVD Player for operation of the buttons exclusively for the DVD Player .
25 REMO TE CONTROL Ho w T o Use T he R emote Control T o Contr ol Y our A V Device A VR Device Button CLU-49101S MY A UDIO/VIDEO RECEIVER (A VR) CODE IS: ______________________ Refer to the instruction manual of the A VR for operation of the buttons exclusively for the A VR.
26 R emote Contr ol Codes CABLE Brand CODES A-MARK 0008,0144 ABC 0237,0003,0008 ACCUPHASE 0003 ACORN 0237 ACTION 0237 ACTIVE 0237 ADB 2092,2586 ARCHER 0237 BCC 0276 BRITISH TELECOM 0003 CENTURY 0008 D.
27 REMO TE CONTROL R emote Contr ol Codes WARDS 0060,0035,0037 0048,0047,0081 0033,0240,0045 0000,0042,0043 0041,0072,0038 0479,0065,0046 WHITE WESTINGHOUSE 0000,0209,0072 0278,0479 WORLD 0209,0002,04.
28 On-Scr een Display Press MENU button on the remote control to display the 1. different features on your Hitachi LCD TV . Use the CURSOR P AD ( 2. , , and ) and highlight a different feature of the On-Screen Display menu. Press the SELECT button to select.
29 ON-SCREEN DISPLA Y The Audio Language and Digital Output of the Audio OSD are only available for Digital channels. NOTE The Signal Strength feature of the Channels OSD is only available for Digital (DTV) channels.
30 Select Video to adjust picture settings and improve picture quality . Y ou can independently customize each of the video inputs, including Analog channels separately from Digital Channels (under TV Mode). Adjustments will be applied to Custom settings.
31 ON-SCREEN DISPLA Y Reel120 Motion Hitachi’s advanced video processor can display movies at 120 frames per second. The following settings are available to smooth the motion of movie sources. Please note that the ef fect may not be immediately noticeable and the effect depends on the content of the movie.
32 Reset This function allows you to reset the Video Menu Settings of the present input source and return it to the Standard video mode Audio Setup Channels Multimedia Move Select SEL Return Exit EXIT Reset all Video settings to the original conditions.
33 ON-SCREEN DISPLA Y Audio Select Audio to adjust the sound to your preference. Video Sound Mode Standard T able T op 32 10 0 32 Bass T reble Balance Bass Boost CONEQ Audio Setup Channels Multimedia Move Adjust the sound to your preference.
34 Setup Sleep Timer Select this feature to set your Sleep Timer from 5 minutes to 4 hours. Press the CURSOR P AD 1. repeatedly to set your T imer from Off, 5 min, 10 min, 15 min, 30 min, 60 min, 90 min, 120 min, 180 min and 240 min. Day / Night Timer Select this feature to activate and set your TV’ s Day/Night/ Picture Mode Timers.
35 ON-SCREEN DISPLA Y Setup Motion Picture Ratings T able NOT RA TED Contains no rating. Not Rated (NR) and Not Applicable (NA) programs. Movie has not been rated or ratings do not apply . G General audiences. All ages admitted. PG Parental guidance suggested.
36 Current T ime Setup Canadian Ratings French T able G General - Programming intended for audiences of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately with humor or caricature or in an unrealistic manner .
37 ON-SCREEN DISPLA Y Setup Closed Captions Closed Captions are the dialogue, narration, and/or sound ef fects of a television program or home video which are displayed on the TV screen.
38 Setup Accent Light This feature turns Off or control the brightness of the Accent Light on the front panel of your TV . Power LED Select this feature to turn Off or On the Power LED indicator on the front panel on your TV .
39 ON-SCREEN DISPLA Y Setup Component Options This function allows you to adjust the phase between your TV and the Device with component output. Video Audio Setup Channels Multimedia Move Adjust the Phase or Reset the Component settings.
40 Channels Select Channels to set your signal source options, run New Channel Scan, Check Signal Meter and Set Channel List (Add channels to List, Channel/Labels and Favorite Channels).
41 ON-SCREEN DISPLA Y Channels/Multimedia Channel Labels Use this feature to give a name to any of the channels. Source Air New Channel Scan Add Channels to List Channel List Channel Labels Favorite Channels Assign names to any of the channels.
42 Equipment Car e And T roubleshooting DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty . Place your LCD T elevision away from extreme heat, humidity and extremely dusty places.
43 USEFUL INFORMA TION T roubleshooting Symptom and Checklist SYMPTOM CHECKLIST P AGES No picture - no sound Check the Indicating lamp status (Off, Red, Blue). • Check the connection of the power cord and/or other cables. • Check if the power of the unit or external device is ON.
44 R eception Pr oblems IGNITION NOISE: Black spots or horizontal streaks may appear , picture may utter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. GHOSTS: Ghosts are caused by the television signal following two paths.
45 USEFUL INFORMA TION F eatures And Specications Supplied Accessories: Remote Control • Batteries (AAA) • Owners Guide • Easy Graphic Guide • Stand Base • Stand Screws • Inputs/Outputs: Wideband Component Y , Pb, Pr . . . . . . . . . .
46 Set Dimensions LE42S704 model (Includes T able T op Stand) Weight (lbs./kg): 38.6/17.5 Rear View Use as Reference for W all Mount Bracket Units : Inches (mm) The screw type : Thread ISO M6 (Metri c type, do not use Standard type). Side View W all Mount Screw specification 25 (635.
47 USEFUL INFORMA TION Set Dimensions LE46S704 model (Includes T able T op Stand) Weight (lbs./kg): 44.2/20.1 Units: Inches (mm) LOCATION OF THE POWER CORD HOLE FOR WALL MOUNT (4 PLACES) Rear View Use as Reference for W all Mount Bracket The screw type : Thread ISO M6 (Metri c type, do not use Standard type).
48 Ser vice Inf or mation HIT ACHI AMERICA, L TD. HIT ACHI has made every ef fort to assure you hours of trouble free operation from your Hitachi product.
49 Limited W ar r anty V ALID ONL Y IN U.S.A. AND PUERTO RICO Congratulations on your purchase of a new Hitachi display product. LIMITED W ARRANTY Hitachi America, Ltd.
50 End User License Ag r eement F or HIT ACHI DTV Softw ar e END USER LICENSE AGREEMENT FOR HIT ACHI DTV SOFTW ARE IMPORT ANT – READ CAREFULL Y : This End User License Agreement for HIT ACHI DTV Sof.
51 LICENSE AGREEMENTS End User License Ag r eement F or Open Sour ce Software OPEN SOURCE SOFTW ARE LICENSE INFORMA TION This Hitachi TV incorporates open source software modules distributed under certain licenses, including the GNU General Public License V ersion 3 (as dened by the Free Software Foundation, Inc.
52 End User License Ag r eement F or Oper ating System Softw are TERMS AND CONDITIONS 0. Denitions. “This License” refers to version 3 of the GNU General Public License. “Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
53 LICENSE AGREEMENTS End User License Ag r eement F or Oper ating System Softw are e) Convey the object code using peer-to-peer transmission, provided you • inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d.
54 End User License Ag r eement F or Oper ating System Softw are If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyo.
55 APPENDIXES A ppendix es Appendix A: Picture Format for Each Input Source Aspect Specications Y es: Available / --: Not Available Input Signal Aspect Auto 4:3 16:9 Full Zoom1 Zoom2 AIR / CABLE Ai.
56 Inde x A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Add Channels to List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Analog Captions . . . . . . . . . . . . . . . . . . . .
57 Notes.
58 Notes.
59 Notes.
60 Notes.
Een belangrijk punt na aankoop van elk apparaat Hitachi LE42S704 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Hitachi LE42S704 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Hitachi LE42S704 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Hitachi LE42S704 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Hitachi LE42S704 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Hitachi LE42S704 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Hitachi LE42S704 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Hitachi LE42S704 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
