Gebruiksaanwijzing /service van het product HM1600 van de fabrikant Hobart
Ga naar pagina of 20
FORM 33971 (10-99) 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 (937) 332-3000 www.hobartcorp.com I N S T R U C T I O N S MODEL HM1600 MICROW A VE OVEN ML-114794 MICROWAVE OVENS.
–2– IMPORT ANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions must be followed, including the following: WARNING : TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE, INJURY TO PERSONS, OR EXPOSURE TO EXCESSIVE MICROWAVE ENERGY: 1.
–3– PRECAUTIONS T O A VOID POSSIBLE EXPOSURE T O EXCESSIVE MICROW A VE ENERGY 1. Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.
–4– TABLE OF CONTENTS GENERAL ............................................................................................................................... ............. 5 Radio Interference ......................................................
–5– INST ALLA TION, OPERA TION AND CARE OF MODEL HM1600 MICROW A VE OVEN GENERAL Microwave heat is generated inside the food rather than being conducted through the food as in conventional methods. Time is used to control the amount of heating that occurs.
–6– INST ALLA TION UNPACKING Immediately after unpacking the microwave oven, check for possible shipping damage. If this oven is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
–7– ELECTRICAL CONNECTIONS Before making electrical connections, verify that the electrical service agrees with the specifications on the data plate on the lower right side as you face the oven. Grounding Instructions This appliance must be grounded electrically.
–8– OPERA TION CONTROLS (FIG. 3) POWER LEVEL — Touch the pad to change to the next power level: HI MED LOW DEF HOLD. (HOLD does not apply any microwave heating; it allows time to pass so that heat from a previous cooking stage can conduct through the product.
–9– Display Time 0 to 1 minute 2 seconds 1 to 3 minutes 5 seconds 3 to 5 minutes 15 seconds 5 to 10 minutes 30 seconds 10 to 30 minutes 1 minute 30 to 60 minutes 5 minutes Power Level Chart (appro.
–1 0– Manual Single Stage Heating Example: Heat for 1 minute 30 seconds at MEDIUM power. • Open the door and place the food inside the oven. Close the door. Timer display shows [ 0 ]. • Touch the POWER LEVEL pad until the indicator above MED is lit.
–1 1– Manual 2 or 3 Stage Heating Example: Heat for 1 minute 30 seconds at MEDIUM power (1st stage) and then heat for 2 minutes at DEFROST (2nd stage). • Open the door and place food inside the oven. Close the door. The Timer display shows [ 0 ].
–1 2– Programmed Heating Example: Microwave for 1 minute on HIGH power (1 stage heating). Memory Pad A – 5 was preset for 1 minute on HIGH power (see Factory Preset, page 9). • Open the door and place food inside the oven. Close the door. Timer display shows [ 0 ].
–1 3– Programming Memory Pads Example: To program memory pad A – 5 to DEFROST for 3 minutes. • Remove the left air filter (refer to Cleaning Air Filters for removal instructions). Press the PROG button. If no PROG indication appears in the display, Program Lock should be cancelled.
–1 4– Programming Memory Pads for 2 or 3 Stage Heating Example: Program memory pad A – 5 to DEFROST for 3 minutes and then to cook on HIGH power level for 2 minutes. • Remove the left air filter (refer to Cleaning Air Filters for removal instructions).
–1 5– Program Lock This feature allows you to lock the memory pads’ power levels and heating times and allows one touch operation of the oven (pressing START is not required). 1. Remove the right air filter. 2. Press and hold in the PROG LOCK button for 5 seconds until the display shows PROG P L .
–1 6– List Memory This feature allows you to review all memory pad power levels and heating times for all three cooking stages. 1. Open the door and leave it open.
–1 7– Programming Beep Tone Loudness The Beep tone can be set at one of three levels of loudness or be silent. 1. Remove air filters. 2. Press PROG. 3. Press BEEP (once to select 3 Loud) (twice to select 2 Moderate) (three times to select 1 Soft) or (four times to select 0 Silent).
–1 8– To Read the Cycle Counter The oven can display the total number of times it has operated. 1. Remove the air filters. 2. Open the door. 3. Close the door. Perform the next step within 60 seconds before the display goes blank. 4. While pressing BEEP, press PROG at the same time.
–1 9– Cleaning WARNING : UNPLUG THE POWER CORD. Keep the inside of the oven clean. If pieces of food or spilled liquids stick to the oven walls, or between the door seal and the door surface, they will absorb microwaves and may cause arcing or sparks.
–2 0– TROUBLESHOOTING Failure Codes The HM1600 Microwave monitors its operation and displays a Failure Code when a problem occurs. CODE CAUSE WHAT TO DO • Unplug the oven to stop beep. • Wait for oven to cool down to reset operation. • If food ignites, do not open the door.
Een belangrijk punt na aankoop van elk apparaat Hobart HM1600 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Hobart HM1600 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Hobart HM1600 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Hobart HM1600 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Hobart HM1600 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Hobart HM1600 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Hobart HM1600 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Hobart HM1600 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
