Gebruiksaanwijzing /service van het product CHG-120 van de fabrikant Honeywell
Ga naar pagina of 24
CHG-120 Battery Charger Instruction Manual Fire Contr ol Instruments 14-16 Southwest Park W estwood, MA 02090 , USA Phone: (781) 471- 3000 F AX: (781) 471-3099 FCI P/N 9000-0572 Document 52459 1 1/22/.
LimW arLg.p65 01/10/2000 An automatic fire alarm system –typically made up of smoke detectors, heat detectors, manual pull stations, audible warn- ing devices, and a fire alarm control with remote notification capability–can provide early warning of a developing fire.
LimW arLg.p65 01/10/2000 WARNING - Several different sources of power can be con- nected to the fire alarm control panel. Disconnect all sources of power before servicing. Control unit and associated equip- ment may be damaged by removing and/or inserting cards, modules, or interconnecting cables while the unit is energized.
Notes.
CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 v T able of Contents Introduction to the Charger ............ .............. ........... .............. ............ .............. .......... 1 Overview ............... ........... .........
vi CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Notes.
CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 1 1. Intr oduction to the Charger Overview The CHG-120 battery charger is designed to charge lead-acid batteries that provide emergency standby power for a Fire Alarm Control Panel (F ACP). T wo 12-volt batterie s are always used in series to supply 24 VDC nominal.
Introduction to the Charger Specifications 2 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 The charge r also provides the following features: • AM-1 ammeter (0-10A) ordered separat ely.
CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 3 2. Installing the Charger Overview This section contains instruction s and illustrations for installin g the char ger , divided into the f.
Installing the Charger Char ger Connections, Jumpers, and Switches 4 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Installation S tandards An installer should be familiar with the following standards: • NEC Article 300 W iring Methods.
Connecting AC Power to the Charger Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 5 Connecting AC Power to the Charger Caution: Before connecting AC power to the charge r—make sure to set the V oltage Select Switch (SW1) on the charger (Figure 2) to match your AC power source (120 V AC or 240 V AC).
Installing the Charger Connecting Batteries to the Char ger 6 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Connecting Batteries to the Charger Overview you can connect 25 AH –120 AH batt eries to the charger . This section provides illustrations and instructions for connecting tw o batteries or for connectin g four batteries.
Connecting Batteries to the Charger Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 7 Connecting Four Batteries Figure 6 shows how to connect four 55 AH batteries to.
Installing the Charger Mounting the Charger 8 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Mounting the Charger Mounting the Charger into a CAB-X3 Series Cabinet Y ou can mount a charger into the bottom row of a CAB-X3 Series Cabinet, as lo ng as the char ger is within 20 feet of the load.
Mounting the Charger Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 9 Mounting the Charger into a BB-55 Battery Box Y ou can also mount a charger into a BB-55 battery box, as long as the BB-55 is with in 20 feet of the load.
Installing the Charger Connecting the C har ger t o a Load 10 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Connecting the Charger to a Load This section provides two applications for co nnecting a charger to a load.
Connecting the Charger to a Load Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 11 Adding the Charger for Additional Current Due to internal fuses, the maximum alar.
Installing the Charger Configuring the Charger 12 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Configuring the Charger Y ou can configure the charger to do the following: • Set the charger input power (see Figure 3 on page 5).
Trouble and Form-C Relay Con nections (Optional) Installing the Charger CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 13 T rouble and Form-C Relay Connections (Optional) T able 5 contain.
Installing the Charger Installing Optional Met ers 14 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 Installing Optional Meters Y ou can also order and install a ammeter (AM- 1) or voltmeter (VM-1) for use with the charger . If mounting an AM-1 or a VM-1, mount the meter to a BB-55 as shown in Figure 14.
CHG-120 Instruction 11/22 /04 PN: 52459:A FCI P/N:9000-0572 15 3. Operating the Charger Overview This section contains information on starti ng the charger , interpreting the LED Status Indicators on the charger , and no rmal operation of the charger .
Operating the Charger Normal Operation 16 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9 000-0572 T able 7 shows the conditions that cause the char ger LEDs to come on: Normal Operation The CHG-120 charges batteries at 4.5 A. When batteries are fully charged, the char ger maintains a float charge of 27.
CHG-120 Instruction 11/2 2/04 PN: 5245 9:A FCI P/N:90 00-0572 17 A AC loss reporting 1, 4, 12 AC Power 4 AC power connections 5 AM-1 installation 14 AM-1 ammeter 2 AM-1 connector 4 B batteries 1 batte.
LimW arLg.p65 01/10/2000 The manufacturer warrants its products to be free from defects in materials and workmanship for eighteen (18) months from the date of manufacture, under normal use and service. Products are date-stamped at time of manufacture.
Een belangrijk punt na aankoop van elk apparaat Honeywell CHG-120 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Honeywell CHG-120 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Honeywell CHG-120 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Honeywell CHG-120 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Honeywell CHG-120 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Honeywell CHG-120 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Honeywell CHG-120 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Honeywell CHG-120 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
