Gebruiksaanwijzing /service van het product DN 10DY van de fabrikant Honeywell
Ga naar pagina of 24
1 INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS FOR CORDLESS ANGLE DRILL MODEL DN 10DY Variable speed WARNING: Improper and unsafe use of this power tool can result in death or serious bodily injury! This manual contains important information about product safety.
2 — CONTENTS — Page IMPORTANT INFORMATION .................................................................................... 3 MEANINGS OF SIGNAL WORDS ............................................................................. 3 SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS .
3 IMPORTANT INFORMATION Read and understand all of the operating instructions, safety precautions and warnings in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions.
4 SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS WARNING: Death or serious bodily injury could result from improper or unsafe use of power tools. To avoid these risks, follow these basic safety instruc- tions: READ ALL INSTRUCTIONS 1. NEVER TOUCH MOVING PARTS.
5 8. KEEP CHILDREN AWAY. Do not let visitors contact tool. All visitors should be kept safely away from work area. 9. DON ’ T FORCE TOOL. It will do the job better and safer at the rate for which it was intended. 10. USE RIGHT TOOL. Don ’ t force small tool or attachment to do the job of a heavy-duty tool.
6 20. HANDLE TOOL CORRECTLY. Operate the tool according to the instructions provided herein. Do not drop or throw the tool. Never allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel. 21. CHECK FOR LIVE WIRES.
7 IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE CORDLESS ANGLE DRILL WARNING: Death or serious bodily injury could result from improper or unsafe use of the cordless angle drill. To avoid these risks, follow these basic safety instructions: 1. Never place hands or other body parts near the drill bit or chuck during operation.
8 Table 1 RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS AC Input Rating Amperes* AWG Size of Cord Equal to or but less Length of Cord, Feet (Meter) greater than than 25 (7.
9 1. NEVER disassemble the battery. 2. NEVER incinerate the battery, even if it is damaged or is completely worn out. The battery can explode in a fire. 3. NEVER short-circuit the battery. 4. NEVER insert any objects into the battery charger ’ s air vents.
10 䡬 Battery (EB9, EB9B) Fig. 1 Terminal Hole Nameplate OPERA TION AND MAINTENANCE NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool.
11 MODEL UC12Y UC14YF / UC14YF2 Input power source Single phase: AC 120V 60 Hz Charging time EB12 ....... Approx. 60 min. EB12 ....... Approx. 45 min. (At a temperature of 68 ° (F20 ° C)) EB12B .... Approx. 60 min. Charging voltage DC 2.4 – 12V DC7.
12 ACCESSORIES WARNING: Accessories for this power tool are mentioned in this Instruction Manual. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. STANDARD ACCESSORIES OPTIONAL ACCESSORIES.....
13 2. Phillips bit Use ..... Driving of wood screws and tapping screws with the head of a plus groove Size .... No. 1, No. 2, No. 3 3. Slotted bit Use ..... Driving of wood screws with the head of a minus groove Size .... 1/8" (3mm), 5/32" (4mm), 1/4" (6.
14 REMOVAL AND INSTALLATION METHOD OF BATTERY 䡬 How to remove the battery. Hold the handle tight. Press the latch located at the front of the battery and pull out the battery. (Fig. 9) 䡬 How to install the battery. Position the battery so that the latch faces toward the switch trigger in the handle and insert the battery.
15 3. Charging 䡬 When the battery is connected to the battery charger, charging will commence and the pilot lamp will light in red. (See Table 2) NOTE: If the pilot lamp does not light, pull out the plug from the receptacle and check if the battery is properly mounted.
16 (3) Regarding recharging time (At 68 ° F (20 ° C)) Depending on the combination of the charger and batteries, the charging time will become as shown in Table 4. NOTE: The charging time may vary according to temperature and power source voltage. 4.
17 How to make the batteries perform longer. (1) Recharge the batteries before they become completely exhausted. When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter.
18 3. Check the direction of rotation. The bit rotates clockwise (viewed from the rear side) by pushing the R-side of the selector button. The L-side of the selector button is pushed to turn the bit counterclockwise. (See Fig. 12) (The and marks are provided on the body.
19 MAINTENANCE AND INSPECTION CAUTION: Pull out battery before doing any inspection or maintenance. 1. Checking the condition of the bit. The bits should be checked regularly. If worn or broken bits can slip or decrease the efficiency of the motor and burn it out.
20.
21 Item Part Name No. 1 Metal 2 Spindle 3A Drill Chuck 10TLRD-N 4 Flat Hd. Screw (Left Hand) M5 × 17 5 Bind Screw M3 × 7 6 Fin 7 Second Pinion 8 Motor 9 Internal Wire (A) 10 Internal Wire (A) 11 Hou.
22.
23.
24 205 Code No. C99058363 Printed in Ireland Please contact HITACHI KOKI U.S.A. LTD. at 1-800-59-TOOLS (toll free), or HITACHI AUTHORIZED POWER TOOL SERVICE CENTER regarding COLLEC- TION. Issued by Shinagawa Intercity T ower A, 15-1, Konan 2-chome, Minato-ku, T okyo 108-6020, Japan Distributed by 3950 Steve Reynolds Blvd.
Een belangrijk punt na aankoop van elk apparaat Honeywell DN 10DY (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Honeywell DN 10DY heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Honeywell DN 10DY vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Honeywell DN 10DY leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Honeywell DN 10DY krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Honeywell DN 10DY bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Honeywell DN 10DY kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Honeywell DN 10DY . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
