Gebruiksaanwijzing /service van het product 3200m van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 288
Las erJet all-in -one user guide hp L ase rJet 3 200/3 200m prin ter f ax copi er scanner ·· ·.
.
hp LaserJet 3200/3200m product user guide.
EN Copyright and License © Hewlett-Packard Company 2001 All Rights Reserved. Except as allowed by copyright laws or herein, reproduction, adaptation, or translation without prior written permission is prohibited.
EN Trademark Credit s Microsoft, Windows, and MS-DOS are U.S. registered trademarks of Microsoft Corporation. E NERGY S TAR is a U.S. registered service mar k of the U.S. EPA. CompuServe is a trademark of CompuServe, Inc. All other products mentioned herein may be trademarks of their r espective companies.
EN.
EN Contents 5 Contents 1 About This Guide Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Using this guide with your product functionality . . . . . . . . . . . . . .12 2 Getting to Know the Product Introduction .
6 Contents EN Printing the control panel me nu structure . . . . . . . . . . . . . . . .47 Printing a co nfiguration re port . . . . . . . . . . . . . . . . . . . . . . . . .48 Printing the block fax list . . . . . . . . . . . . . . . . . . . . . . . .
EN Contents 7 Advanced receive fax features and settings . . . . . . . . . . . . . . . . .86 Using fax forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Requesting a fax from another fax machine (polling) . . . . . . .88 Clearing faxes from memory .
8 Contents EN Default Copy Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 Changing the default copy quality . . . . . . . . . . . . . . . . . . . . .126 Changing the default copy contrast . . . . . . . . . . . . . . . . .
EN Contents 9 Resolving PostScript Errors . . . . . . . . . . . . . . . . . . . . . . . . .207 Restoring the factory defaults . . . . . . . . . . . . . . . . . . . . . . . . . . .209 Uninstalling the software . . . . . . . . . . . . . . . . . . . . . .
10 Contents EN HP sales and service office s . . . . . . . . . . . . . . . . . . . . . . . . . . .253 Worldwide Hewlet t-P ackard Countr y/R egion Sales and Se rvice Offices . . . . . . . . . . . . . . . . . . . . . . .2 53 Ordering p arts . . . . . .
EN Introduction 11 About This Guide Introduction This user guide provides details for initiating ta sks from the product control panel, changing infreque ntly used se ttings, resolving problems, and contacting HP support. This guide also provides an overview of how the softwa re works.
12 Chapter 1 - About This Guide EN Using this guide with your product functionality Because product functionality varies according to installation , all procedures in this guide will have one or more of the following icons above them to denote the location from which you can perform that procedure.
EN Introduction 13 Getting to Know the Product Introduction The HP LaserJet 3200 product, a po werful business tool, gives you the capabilities of a full range of office equipment.
14 Chapter 2 - Getting to Know the Produc t EN What you can do with the product The tables in this section show which functions will work when another function is already in use: l When the product is dire ctly co nnected to a computer, or l When the product is connected to a network.
EN What you can do with th e pr od uc t 15 If the product is: Can I? Send a print job Receive a paper fax Send a paper fax Receive a PC fax Send a PC fax Scan to the PC Copy Receiving a PC fax No. No. Phone line is in use. No. Sends when first fax job ends.
16 Chapter 2 - Getting to Know the Produc t EN When the product is connected to a network This table shows what functions will work when you or another network user ar e us ing some other fu nc tion , an d the pr od u ct is connected to the network using a supported HP JetDirect print server.
EN What you can do with th e pr od uc t 17 If the product is: Can I? Send a print job Receive a paper fax Send a paper fax Receive a PC fax Send a PC fax Scan to the PC Copy Scanning Yes. Yes. No. Document feeder tray is in us e. No. Not available to network users.
18 Chapter 2 - Getting to Know the Produc t EN Identifying product components The topics in this section familiarize you with the control panel and how to use it. They also pro vid e gr ap h ics of th e pr od uc t to he lp identify the different externa l hardware parts.
EN Identifying product componen ts 19 Using the control panel menu structure What follows is a hierarchical diagr am of the control panel menu structure.
20 Chapter 2 - Getting to Know the Produc t EN Control panel main menu and first submenu The following lists the choices in the control panel ma in menu and the correspond in g firs t submenu.
EN Identifying product componen ts 21 Identifying hardware parts The two gr aphics that follow show the external ha rdware parts of the product. 1 Front paper pa th door 2 Document output slot 3 Docum.
22 Chapter 2 - Getting to Know the Produc t EN 6 Document feeder tray 7 Paper output bin 8 Single-sheet input slot 9 Paper input tray 10 Paper input guides 11 Special media lever 9 10 11 7 8 6.
EN Selecting print media 23 Selecting print media In this section you will find information on: l Selecting media to prin t l Selecting items for faxing, co pying, or scanning Selecting media to print.
24 Chapter 2 - Getting to Know the Produc t EN Print media sizes The paper inpu t tray can hold u p to 125 shee ts of 20 lb (75 g /m 2 ) print media. The single-sheet input slot is designed to ho ld one sheet. Both can be adjusted to hold medi a measuring fr om 3 by 5 inches (76.
EN Selecting print media 25 Selecting items for faxing, copying, or scanning The produc t can scan items of var ious sizes, from 2 by 3.5 inches (51 by 89 mm) (the size of a business card) to 8.5 by 14 inche s (215 by 356 mm), and ca n fa x and copy items ranging from 2 by 3.
26 Chapter 2 - Getting to Know the Produc t EN Loading print media In this section you will find information on: l Loading print media to be faxed, cop i ed, or scanned l Loading media to be printe d .
EN Loading print media 27 To load special items When loading items to be faxed, copied, or scanned , you need to protect small, fragile, lightweight (les s than 12 lb. or 46 g/m 2 ), or irregularly s ized items such as receipts, newspaper clip pings, photographs, and old or worn d ocuments.
28 Chapter 2 - Getting to Know the Produc t EN 4 Load only one sheet at a time, top first, face down, into the document feeder tray. Note If you are loading a business card, load it long edge first. 5 Move the special media lever back to the left after special items have been fed.
EN Loading print media 29 2 Insert up to 125 sheets of paper into the paper input tray. Be careful not to overfill the tray. Note When adding paper to an existing stack in the paper input tray, always remove the existing paper and realign it with the new paper be fore loading to reduce multiple feeds or jams.
30 Chapter 2 - Getting to Know the Produc t EN 2 Insert one sheet of med ia into the single-sheet in put slot. If loading special media or letterhea d, insert media top first, facing forward. 3 Readjust the g uides to cente r the sheet. Note If you have loaded special media , make sure to choose the lower paper output path.
EN Loading print media 31 Selecting the output pa th Selecting the output pa th determines whether printed med ia come out of the paper output bin or out of the front pa per output slot. Choose the front paper output slot if you are printing on special media , such as 28 lb (100 g/m 2 ) or heavier weight paper, envelopes, transparencies, or labels.
32 Chapter 2 - Getting to Know the Produc t EN Features available only through the software The tools and options described in the sectio ns listed below are available only through the software that came with the HP La serJet 3200 product.
EN Features ava ilab l e on ly thr o ug h th e sof twa re 33 To open the HP LaserJet Director in the Mac OS, dou ble-click the alias for the HP LaserJet Director th at app ears on the desktop as shown below . The following examples o f the HP L aserJet Dir ector for Windo ws and the Mac OS shows only the default buttons.
34 Chapter 2 - Getting to Know the Produc t EN The following table explains th e buttons that appear o n the HP LaserJet Dir ector. To turn off the HP LaserJet Director Use the following if you do not want the HP La serJet Director to appear when a documen t is loaded into the document feed er tra y.
EN Features ava ilab l e on ly thr o ug h th e sof twa re 35 Mac OS 1 On the HP LaserJet Director toolba r, click the Customize button. 2 Click the General tab. 3 Click "Show the Document Assistant when paper is ins erted into the scanner automatic document feeder " to deselect this option, and then click OK.
36 Chapter 2 - Getting to Know the Produc t EN.
EN Introduction 37 Managing General Default Settings, Logs, and Reports Introduction This chapte r contains th e procedu res for print ing reports an d altering general default settings for the product. For information about settings that pertain to faxing, printing, copying, or scanning, see the corresponding section.
38 Chapter 3 - Managing General Default Settings, Logs, and Reports EN Changing general default settings This section contains instructions for: l Changing the default paper size for the paper input t.
EN Changing general default settings 39 Changing sound volume You can control the volume of the following: l The fax sounds associated with incoming and outg oin g faxes. l The ring for incoming faxes. l The alarm sound the product emits when it requires attention, such as when the printer door is open.
40 Chapter 3 - Managing General Default Settings, Logs, and Reports EN To change the alarm volume The alarm is heard when the device is presenting an alert or critical error message. The alar m duration length is either on e or three seconds, based on the type of error.
EN Changing general default settings 41 Changing the language on the display pa nel Use this procedure to have the control p anel display messages and reports in a language other than the default for your country. To change the language on the display panel 1 Press E NTER /M ENU .
42 Chapter 3 - Managing General Default Settings, Logs, and Reports EN Managing logs and reports This section con tains the following procedures for pr inting reports and for establishing a schedule f.
EN Managing log s an d re po rt s 43 Printing the fax activity log On demand, you can print a log of the last 40 faxes. This log inclu des entries for: l All faxes received to the product l All faxes .
44 Chapter 3 - Managing General Default Settings, Logs, and Reports EN Setting the fax activity log to print automatically The fax activity log provides a chronological history of the last 40 faxes that were received, sent, or deleted, as well as any errors th at occurred.
EN Managing log s an d re po rt s 45 Printing a fax call report A fax call report is a brief report ind icating the status of the last sent or received fax. You can set the fax call report to print auto matically. See “Setting when the fax call report prints” on page 45 for more information.
46 Chapter 3 - Managing General Default Settings, Logs, and Reports EN To set when fax call reports print 1 Press E NTER /M ENU . 2 Use the < or > key to select REPORTS , and then press E NT ER / M ENU . 3 Use the < or > key to select FAX CALL REPORT , and then press E NTER /M ENU .
EN Managing log s an d re po rt s 47 Printing a one-touch, speed-dial, and group- dial report This report lists the fa x numb ers that are assigned to th e one-touch keys and speed -di al an d gr ou p -di al co de s. To print a one-touch, speed-dial and group-dial report 1 Press E NTER /M ENU .
48 Chapter 3 - Managing General Default Settings, Logs, and Reports EN Printing a configuration report Print this report to show the current product settings. To print a configuration report 1 Press E NTER /M ENU . 2 Use the < or > key to select REPORTS , and then press E NT ER / M ENU .
EN Managing log s an d re po rt s 49 Printing a PCL font list Use this procedure to print a list of the PCL fonts. To print a PCL font list 1 Press E NTER /M ENU . 2 Use the < or > key to select REPORTS , and then press E NT ER / M ENU . 3 Use the < or > key to select PCL FONT LIST , and then press E NTER /M ENU .
50 Chapter 3 - Managing General Default Settings, Logs, and Reports EN Printing all fax reports Use this procedure to print the following repo rts at one time: l Fax activity log l One-touch, speed-dial, and gro up-dial report l Configuration report l Block fax list To print all fax reports 1 Press E NTER /M ENU .
EN Managing log s an d re po rt s 51 Setting when the T.30 protocol trace report prints You can set the T.30 pr otocol tr ace report to print: l Never (the default) l If an error occurs l At the end of every send and received fax To set when the T.30 protocol trace reports prints 1 Press E NTER /M ENU .
52 Chapter 3 - Managing General Default Settings, Logs, and Reports EN.
EN Introduction 53 Faxing Introduction All users can fax to and from the product. The produ ct operates just like a regular fax machine; you do not have to install the softwar e or have the computer on for it to work. From the control pa nel, you can send and receive paper faxes and adjust all settin gs needed for faxing.
54 Chapter 4 - Faxing EN Sending faxes This section contains the following topics: l Sending faxes to one recip ient l Quickly programming speed-dial co des or one-touch keys l Sending faxes to multip.
EN Sending faxes 55 Sending faxes to one recipient This procedure deta ils how to send a fax to one recipient. Hint If you want to improve the q uality of a pap er document before faxing it, scan the document first and straighten or clean the image. Then, send it as a fax from the software.
56 Chapter 4 - Faxing EN one-touch keys Use the following meth od to program speed-dial co des and one-touch keys easily from the product control panel. To quickly program speed-dial codes or one-touch keys Note This procedure cannot be used to program a grou p-dial code.
EN Sending faxes 57 Sending faxes to multiple recipients You can send a pa per fax to several fax numbers at once . If you want to send a fax to a group of fax numbers yo u have assigned to a group-dial code, see “To send a fax using a group- dial code.
58 Chapter 4 - Faxing EN To send a fax to an ad-hoc group 1 Dial the first fax number u sing one of the following m ethods: • Use the numeric keys. • If the fax number you are calling has a one-touch key, press that key.
EN Sending faxes 59 Sending a fax at a future time You can schedule a fax to be sent automatica lly at a future time to one or more people. Whe n you complete this procedure, th e product scans the docum e nt into me m or y an d re tu rn s to th e Rea d y stat e so you can do other tasks.
60 Chapter 4 - Faxing EN 6 Use the numeric keys to type the date, and then press E NTER / M ENU . - Or - Accept the default date by pressing E NT ER /M ENU . 7 Type the fax number, en ter the speed-dial code, or press the one-touch key. (This feature does not suppo rt ad hoc groups.
EN Sending faxes 61 Using the Contrast button to adjust th e contrast for the current fax or copy job The contrast setting affects the lightness or darkness of an ou tgoing fax as it is being sent or the resulting copy. Using the following procedure changes the con trast for the current job only.
62 Chapter 4 - Faxing EN Adjusting the resolution for the current job Resolution affects the quality, in dots per inch, of documents to be faxed. It also affects the transmission speed. For a discussion of which resolution to choose, see “Resolution options” below.
EN Sending faxes 63 Photo (halftone images scan up to 300 by 300 dpi) Best quality fo r graphics and ph otos. l Use this setting when the quality of graphics and photos in the document is mor e importan t th an th e quality of wo rd s. l Only a few fax machines receive at this mode.
64 Chapter 4 - Faxing EN Canceling the current fax job Use this procedure to stop a sin gle fax cu rrently dialing or being transmitted or received. To cancel the current fax job Press S TOP /C LEAR on the control panel. Any pages that have not already been transmitte d are canceled.
EN Receiving faxes 65 Receiving faxes You can receive faxes to th e p roduct or to your co mpu ter. In gener al, incoming faxes to the product are automatica lly answered, howeve r if you change what devices are connected to the same phone line to which the product is connected, you will need to change how the product answers incoming faxe s.
66 Chapter 4 - Faxing EN Reprinting faxes If a fax did not print beca u se the to ne r ra n ou t or if the fax prin te d on the wrong type of media, you can try to reprint it. Th e actual number of faxes stored for possible reprinting is determined by h ow much memory is available.
EN Receiving faxes 67 Blocking or unblocking fax numbers If there are peo ple or busin es s es from who m you do not w an t to receive faxes, you can block their fax numbers using the control panel.
68 Chapter 4 - Faxing EN • To unblock a single fax numbe r : use the < or > key to select DELETE ENT RY and then press E NTER /M ENU . Use the < or > key to select the fax number you want, and the n press E NTER / M ENU to confirm the deletions.
EN Advanced se nd fax featur es and sett ings 69 Advanced send fax features and settings The section describes adva nced procedures and settings you can use when sending fa xe s.
70 Chapter 4 - Faxing EN About speed-dial codes, one-touch keys, and group-dial codes To simplify the dialing process for a fax number yo u dia l frequently from the control panel, store it in a one- touch key, speed-dial code, or group-dial co de .
EN Advanced se nd fax featur es and sett ings 71 Programming speed-dia l codes and one- touch keys Speed-dial codes 1 thr ough 10 are also associated w ith th e correspond in g on e- to uc h ke y on th e co ntr o l pan el. The one - to uch keys can be used for speed-dial or gr oup-dial codes.
72 Chapter 4 - Faxing EN 9 Using the numeric keys, enter a name for the fax num ber. To do so, repeatedly press the nu meric key for the letter you need un til the letter appears. (Se e “Using dialing characters” on pag e 78 for a list of char acters.
EN Advanced se nd fax featur es and sett ings 73 Programming a one-touch key for alternate long distance If you use an alternate long distance service, you can program a one- touch key to dial the se rvice’s access number before a fax num ber. When you need to use this one-touch key, press it, enter the fax number, and then press F AX /S END .
74 Chapter 4 - Faxing EN Programming group-dial codes If you send information to the same group of peo ple on a regular basis, you can progra m a group-dial code .
EN Advanced se nd fax featur es and sett ings 75 7 Using the numeric keys, enter the number yo u want to associate with this group and pr ess E NTER /M ENU . Choosing 1 th ro ug h 10 also associates this group with the corresponding one-touch key. 8 Using the numeric keys, enter a name for the gr oup.
76 Chapter 4 - Faxing EN 2 Use the < or > key to select FAX SETUP and then press E NTER / M ENU . 3 Press E NTER /M ENU to select SPEE D DIALS . 4 Use the < or > key to select GROUP SETUP and then press E NTER / M ENU . 5 Use the < or > key to select DELETE # IN GROUP and then press E NTER /M ENU .
EN Advanced se nd fax featur es and sett ings 77 Using Manual Dial Normally, the product dials after you press F AX /S END . At time s, however, you might want the product to dial ea ch number as you press it.
78 Chapter 4 - Faxing EN Inserting a pause or wait into a fax number You can insert pauses into a fax number you are dialin g or programming to a one -touch key, speed-d ial code, or group-d ial code. Pauses are often needed wh en dialing internationally or connecting to an outside line.
EN Advanced se nd fax featur es and sett ings 79 Changing the information in the fax header You already entered fax he ader information when yo u first set up the product. You only need this procedure to change the date, time, your fax number, and company na me for the fax header.
80 Chapter 4 - Faxing EN Changing the fax number and company name You already entered this information when installing the software or when you first set up the prod uct. You only need this procedure if yo u want to change the information from th e control panel.
EN Advanced se nd fax featur es and sett ings 81 Changing the default contrast and resolution for outgoing faxes The contrast affects the lightness and da rkness of an outgoing fax as it is being sent. Resolution affects the sh arpne ss of ou tg oing faxes.
82 Chapter 4 - Faxing EN To change the default resolution The choices for this setting are Fine (the factory defau lt), Standard, Superfine, and Photo.
EN Advanced se nd fax featur es and sett ings 83 Changing how the product redials If the product was unable to send a fax because the receiving fax machine did not answer or was busy, the product will attempt to redial based on the Re dial On Busy an d Redial On No Answ er options.
84 Chapter 4 - Faxing EN 5 Use the < or > key to select ON or OFF and then press E NTER / M ENU . Inserting a dial prefix A dial prefix is a number or number s automatically added to the beginning o f every fax number you enter at th e control p anel or from the software.
EN Advanced se nd fax featur es and sett ings 85 Changing the detect dial tone setting Normally the product waits for a dia l tone before attempting to a dial a fax number. If you are using the product on the same line as your phone, turn on the detect dial tone setting.
86 Chapter 4 - Faxing EN Advanced receive fax features and settings The section describes mor e advanced procedur es an d settings you can use for receiving faxes.
EN Advanced receive fax features and settings 87 Using fax forwarding You can set your produ ct to forward incoming faxes to ano th er fax number. When the fax arrives at your prod uct, it is sto red in memory. Then, your product dia ls the fax number you have specifie d and sends the fax.
88 Chapter 4 - Faxing EN Requesting a fax from another fax machine (polling) If someone else has set up a fax to be polled, you can requ est that the fax be sent to your product. (This is also known as polling another machine.) To request a fax from another fax machine 1 Press E NTER /M ENU .
EN Advanced receive fax features and settings 89 Clearing faxes from memory Only use this procedure if you are concerned someone else has access to your product and will try to reprint faxes in the reprint memory.
90 Chapter 4 - Faxing EN Changing how the product answers incoming faxes You set the answer mode when you set up the product. You will only need to change these settings if you chan ge what devices are connected to this phone line. To set the answer mode to automatic or manual 1 Press E NTER /M ENU .
EN Advanced receive fax features and settings 91 Changing answer ring patterns If you subscribe to ri ng patte rn ser vice with you r telep hon e co mpany, enable the product to de tect ring patterns. If you do not have ring pattern service, and you change this setting, the product will not be able to re ceive fa xes.
92 Chapter 4 - Faxing EN How will I know if it’s working? After product installation is complete , ask someone you know to sen d you a fax. Make sure you provide the correct fax number. To change answer ring patterns Note Do not change the All Rings default settin g if you do not have ring pattern service from you r telephone company.
EN Advanced receive fax features and settings 93 Enabling an extension phone With this setting turned on, you can alert the pr oduct to pick up the incoming fax call by pressing 1 - 2 - 3 sequentially on the telephone keypad.
94 Chapter 4 - Faxing EN Changing the silence-detect mode This setting co ntrols wheth er or not you ca n receive fax es from olde r- model fax machines that do not emit a fax signal durin g fax transmissions. At the time of this publication, these silent-model fax machines represente d very few of the fax machines in use.
EN Advanced receive fax features and settings 95 Changing autoreduction for incoming faxes If the Fit To Page option is on, the product automatically reduces lon g faxes to fit on the paper. If the feature is turn ed off, long faxes print at full size on multiple pages.
96 Chapter 4 - Faxing EN Enabling stamp received faxes The product is set up to print the sender’s ide ntification at the top of each receiv ed fax. You ca n also choose to have your header information included to confirm the date and time the fax was received.
EN Advanced receive fax features and settings 97 Setting error correction Normally, the product monitors the signals on the telephon e line while it is sending or receiving a fax. If the product detects an error signal during the transmission and the Error Correction se tting is on, the product can request that a portion of th e fax be resent.
98 Chapter 4 - Faxing EN Faxing using the software This section co ntains some in structions ab out sending an d receiving faxes using the sof tware tha t cam e with th e pr od uc t, as well as creating your own cover page. All other software-related topics are covered in the software Help.
EN Faxing using th e sof twa re 99 2 Add one or more r ecipients on the HP Laser Jet Send Fax di alog box. 3 Optionally, include a cover page. 4 Click Send Now .
100 Chapter 4 - Faxing EN Note Once the Stop Receive to PC setting has been selecte d, any faxes still in the product’s memory are printed. Customizing your own fax cover sheet You can use the HP LaserJet Cover Pa ge Editor to customize a fa x cover sheet for all your outg oing fax transmissions.
EN Faxing using the software 10 1 To customize your own fax cover sheet (Mac OS) 1 Open the HP LaserJet Workplace. In the File menu, choose New Cover Page. A new cover p age opens in the page editor along with the Tools, Align, and Proper ties palettes.
102 Chapter 4 - Faxing EN.
EN Introduction 103 Printing Introduction This section introduces you to the basics of printing, as we ll as offering tips for performing pr inting tasks with special media.
104 Chapter 5 - Printing EN Printer drivers Printer drivers access the product’s featur es and allow the computer to communicate with the printer. This section discusses the printer drivers installed with the product s oftware. Choosing a printer driver Choose a printer driver based on the way you use the product.
EN Printer drivers 105 Gaining access to the printer driver After installation, you can gain access to pr inter settings through the printer driver from the pr oduct software or from anothe r software application.
106 Chapter 5 - Printing EN Printer tasks Use the product to do the following proced ures: l Printing on lett erhead and envelopes l Printing on special media l Stopping a print job l Saving toner whe.
EN Printer tasks 107 Printing on letterhead and envelopes This section provides procedures fo r pr inting on letterhead and envelopes. To print on letterhead 1 If you are printing a she et of letterhe.
108 Chapter 5 - Printing EN To print on envelopes 1 If you are printing one envelope followed by regul ar sheets of paper, place the en velope into the sing le-sheet input slo t (A) and place regular sheets of pap er into the paper input tra y (B).
EN Printer tasks 109 4 When you are finished printing en ve lopes, close the front paper path door. Printing on special media The product is designed to print on a vari ety of media, including transparencies, envelopes, and custom-made pa per. See “Selecting media to print” on page 23 for more information.
11 0 Chapter 5 - Printing EN To print on special media 1 Open the front paper path d oor. This is important when printing media such as postcards, transparencie s, labels, envelop es, and heavy paper (28- to 42- lb [100- to 157-g /m 2 ] bond weight).
EN Printer tasks 111 5 Set the correct margins, paper size, and orientation in your software. 6 Choose Print in your software. 7 When you are finished, be sur e to close the front paper pa th door. Stopping a print job If your print job is currently printing, you can stop a print job by pressing S TOP /C LEAR on the control panel.
11 2 Chapter 5 - Printing EN Printing on both sides of paper Note When using a Windows-compatible computer or a Macintosh- compatible comp ut er , this opt ion is not availa ble with th e Pos tScr ipt printer driver that is provided with the pr odu ct.
EN Printer tasks 11 3 C Flip pages up (landscape) - This layout is often used in accounting, dat a pr oc ess ing, and spread sh e et ap p licat ion s. Every other printed image is oriented upside- down. Facing pages are read continuously from top to bottom.
11 4 Chapter 5 - Printing EN Printing multiple pages on one sheet of paper You can select the number of page s you want to print on a single sheet of paper. If you choose to print mo re than one page per shee t, the pages will appear decreased in size and arranged to fit on the sheet.
EN Printer settings 11 5 Printer settings See the two sections listed below to learn more abo ut th e different settings for printing. l Changing the resolution l Saving printer settings for different print jobs Note For more informa tion about how to use printer settings, see the software Help.
11 6 Chapter 5 - Printing EN Saving printer settings for different print jobs The Quick Set feature allows you to save and reuse the curre nt printer settings. Saved se ttings are called Quick Sets. For example, you might w ant to create a Q uick Set for env elopes or for printing the first page of a document on letterhead.
EN Printing Tips 11 7 Printing Tips This section contains: l Tips for pr inting custom sizes l Tips for printing env elopes l Tips for pr inting labels For more information ab out using print media with HP LaserJet printers, refer to the Print Media Guide (see “Ordering parts” on page 257).
11 8 Chapter 5 - Printing EN Tips for printing labels l Do not use labels that are separating from the backing sheet or that are wrinkled or damaged in any way. l Do not use any sheet of labels that has spaces in it where some of the labels have been removed.
EN Introduction 11 9 Copying Introduction Anyone can make copies by using the control pa nel on the product. To use the HP Laser Jet Director to make copies, your comp uter must be directly connected to th e product. This section provides information on how make cop ies from the product as well as how to change copy settings.
120 Chapter 6 - Copying EN Copying tasks The product functions as a standa lone copier — you do not have to have software installed or have the comp uter on to make copies. Generally, making copies using the produ ct’s control panel is the easiest and fastest metho d.
EN Copying tasks 121 Making black and white copies Use this procedure to make copies from the prod uct. You can make up to 99 copies of a document that ha s a s many as 30 pages (depending on the thickness of the pages).
122 Chapter 6 - Copying EN To make black and white copies 1 Load the document into the document feeder tray. 2 Adjust any options, such as contrast or copy size. 3 If you are making only one copy , press C OPY . - Or - If you are making m ultiple copies, enter the number of copies you want and press C OPY .
EN Copying tasks 123 Adjusting copy quality for the current job The default setting for copy quality is Text. This setting is the best for items that contain mostly text. When making a copy of a photo or graphic, you can select Photo to increase the qua lity.
124 Chapter 6 - Copying EN To reduce or enlarge copies 1 Press R EDUCE /E NLARGE . 2 Enter the size to which you would like to reduce or enla rge the copies in this job. You can choose ORIGINAL (100%) , LEGAL TO LETTER , LEGAL TO A4 , or A4 TO LETTER , LETTER TO A4 , or CUSTOM (25 -200%) .
EN Default Copy Settings 125 Default Copy Settings You can use the software to change the defaul t copy settin gs. See the topics listed below for more information: l Changing the default copy qua lit.
126 Chapter 6 - Copying EN Changing the default copy quality The choices for this setting are Text (the factory default), Photo, and Draft. Note If you only want to adjust the quality for the job you are currently copying, see “Adjusting co py qua lity for the current job” on page 123.
EN Default Copy Settings 127 To change the default copy contrast 1 Press E NTER /M ENU . 2 Use the < or > key to select COPY SETUP , and then press E NTER / M ENU .
128 Chapter 6 - Copying EN Changing the default copy collation You can set the product to collat e multiple copies into sets. For example, if you are making two copies of three pages an d the collation is on, the pages print in this or der: 1,2,3,1,2,3.
EN Default Copy Settings 129 Changing the default number of copies You can choose to have the default number of cop ies be any value from 1 to 99. The default set at the factory is 1. To change the default number of copies 1 Press E NTER /M ENU . 2 Use the < or > key to select Copy Setup and press E NTER /M ENU .
130 Chapter 6 - Copying EN.
EN Introduction 131 Scanning Introduction The product is capable of scanning at a 600 p ixel-per-inch (ppi ) resolution. The scanner allo ws color scanning, and increase d detail in both color and black and white scans.
132 Chapter 7 - Scanning EN Scanning basics The product offers three ways to scan an item. These includ e: l From the so ftware : Use the HP LaserJet Director to initiate a scan and then finish the scan using other software. For more information , see “Scann ing from the product softwa re” on page 133.
EN Scanning from the product softwa re 133 Scanning from the product software This section dis cusses the s canning meth od in two phas es: 1 Starting a scan - this section shows how to u se the HP LaserJet Director to start a scan, to choose scan settings, and to choose to scan all pages at once or scan pa ge-by-page.
134 Chapter 7 - Scanning EN 3 Click the Scan button on the HP La serJet Direc tor. The HP LaserJet Scan Control Viewer dialog box appears. 4 Select a scan destination. 5 Choose to scan in color by selecting the S can in color check box. The produ ct automatically scans in bl ack and white if you do not sel ect t his che ck box.
EN Scanning from the product softwa re 135 3 Click Scan on the HP LaserJet Director. The HP LaserJet Scan Control Viewer dialog box appe ars. 4 Select a scan destination. 5 To select the color scanning option, click "Scan in color." (The product automatically scans the selection in black and white if this option is not selected.
136 Chapter 7 - Scanning EN Working with scanned items If you choose to scan pa ge -b y- pag e, yo u ca n pe rfor m ed itin g functions on each page. Editing functions include lighten ing and darkening ph ot o re gio n s, ad din g or rem o vin g re gio n s fro m th e pa ge , changing region types, an d cropping section s.
EN Scanning from the product softwa re 137 3 Click Scan Next Page to save any edits performed on the previous page and scan the next page in the docu ment feeder tray. Repeat steps 2 and 3 for the remaining pages in the document fe ed er tra y. -Or- Click Send .
138 Chapter 7 - Scanning EN About OCR software Optical Character Recognition (OCR) is a technology that recognizes letters in a scanned image and conv erts them into ASCII characters, or editable text. OCR programs convert some t ext more accurately than other text.
EN Scanning from the product control panel 139 Scanning from the product control panel You can scan documents entirely from the pr oduct control panel (without editing them) and send them to a destination, such as Microsoft Word or an e-mail address.
140 Chapter 7 - Scanning EN Adding or deleting scan destinations You can program the S CAN key on the control panel to scan items and send them to a destinatio n. Each Windows-compatible computer connecte d directly to the product or on a network can designate up to five destination s.
EN Scanning from the product control panel 141 3 Select the Perform this action when the device Scan button is pressed check box. 4 Select an item from the Destination list, and then click the Add button.
142 Chapter 7 - Scanning EN 2 Click the Customize button on the HP LaserJet Director. 3 In the General tab, click "Allow initiating a scan from the device" to select this option. 4 Select an item from the list, and then click Apply. Note You can choose only on e de st ina tio n fo r the S CAN key on the device.
EN Sending scanned items as e-mail attachments 143 Sending scanned items as e-mail attachments The product and the software tha t came with the product work with compatible e-mail programs so yo u can e-mail documents in PDF format, but other options are also available de pending on what file formats are suppor ted by your e-mail progra m.
144 Chapter 7 - Scanning EN To send e-mail using Microsoft Windows 95 1 Open a TWAIN-enabled p rogram to scan from the application . 2 Save the file. 3 Open your e-mail pr og ra m . 4 Attach the document and send the e-mail. Note For more information, se e “Scanning with TWAIN-enabled softwar e.
EN Sending scanned items as e-mail attachments 145 Sending e-mail in an alternative mode You can use an altern ative mode to send a docu ment in e-mail if: l You do not have a com patible e -mail progr am. l The Email button does n ot appear on the HP LaserJet Directo r.
146 Chapter 7 - Scanning EN.
EN Introduction 147 Problem Solving and Product Maintenance Introduction This section offers solutions to problems that can occur while using this product. It also provides maintenance tasks to optimize product functionality. Note Most answers for software-re lated issues are in the software Help.
148 Chapter 8 - Problem Solving and Product Maintenance EN General troubleshooting checklist If the product does not work properly, first verify the following: l The Ready (green) light is o n and not blin king. If the Error (yellow) light is blinking, check the control panel display for a message.
EN Resolving fax problems 149 Resolving fax problems See the following sections to troubleshoot gener al fa x issues, as well as issues that might occur when send ing or receiving a fax: l Fax setup c.
150 Chapter 8 - Problem Solving and Product Maintenance EN Is your phone line service dedicated, shared, PBX, or a roll-over? l Dedicated line : A unique fax/phone numb er assigned to r eceive or send faxes; the phone co rd is connected to the port loca ted on the back of the pro duct that is not labeled with the telepho ne icon.
EN Resolving fax problems 151 HP LaserJet product shared with another device: Telephone answe ring machine (TAM) An answering ma chine sho uld be conn ec ted directly to the po rt located on the back of the product that is labeled with the telep hone icon or should be shared on the sam e phone line extensio n.
152 Chapter 8 - Problem Solving and Product Maintenance EN General fax problems Use the table in this section to resolve fax pr oblems. Problem Cause Solution No parallel or USB port is available, or the parallel or USB port is being shared by another devi ce.
EN Resolving fax problems 153 Sending fax problems Use the table in th is section to solve pr oblems that might occur when sending faxes . Problem Cause Solution Faxes quit during sending . The fax machine to which you are sending might be malfunctioning.
154 Chapter 8 - Problem Solving and Product Maintenance EN Faxes you send are not arriving at the receivin g fax machine. The receiving fax machine might be off or have an error condition, such as being out of paper.
EN Resolving fax problems 155 Receiving fax problems Use the table in th is section to solve pr oblems that might occur when receiving faxes. Problem Cause Solution Unable to sta rt receiving faxes from an extension phone. The Extension Phone setting might be disabled.
156 Chapter 8 - Problem Solving and Product Maintenance EN Incoming fax calls are not being answered by the produc t. The answer mode might be set to Manual.
EN Resolving fax problems 157 Faxes do not print as expected. The Receive to PC option might be selected. Turn off the Receive to PC option in the HP LaserJet Device Configuration to ol: 1 Click Start , point to Programs , point to HP LaserJet 3200 , point to Tools , and then click HP LaserJet Device Configuration .
158 Chapter 8 - Problem Solving and Product Maintenance EN Faxes are no t printing or are printing incorrectly at the product. There is no media in the paper input tray. The Receive to PC option might be selected, and faxes are being received by the computer.
EN Resolving printing proble ms 159 Resolving printing problems Use the sections listed below to re solve common prin ting problems: l General printing pr oblems l Printing problems when using MS-DOS Note See also “Resolving image quality prob lems” on page 181.
160 Chapter 8 - Problem Solving and Product Maintenance EN The product is not respondi ng after “Print” is selected in the software, or you receive a message on the computer screen stating there was an error printing to the parallel or USB port. The printer might be printing a co mplex image.
EN Resolving printing proble ms 161 The product is not respondi ng after “Print” is selected in the software, or you receive a message on the computer screen stating there was an error printing to the parallel port. The product is malfunctioning. Another device is conflicting with the parallel port.
162 Chapter 8 - Problem Solving and Product Maintenance EN When printing from an MS- DOS program running in Windows, th is message appears: “There wa s an error writing to LPT1: for the printer (name of a printer, unknown, o r it is blank): Cannot access a port.
EN Resolving printing proble ms 163 Printing problems when using MS-DOS Use the information in this section to troublesh oo t printing problems when printing from MS-DOS. To establish basic communication to the product 1 For Windows 95 and 98, click Start , and then click Shut Down .
164 Chapter 8 - Problem Solving and Product Maintenance EN Resolving copying problems See the table below to tr oubleshoot common co py problems. See also “Resolving image quality proble ms” on page 181 and “Resolving paper feed proble ms” on page 170.
EN Resolving copying problems 165 Either light or dark vertical lines run through the copy. The scanner glass might be dirty. Clean and recalibrate the scanner. See “Cleaning the scanner path” on page 21 3 and “Recalibrating the scanner” on page 216.
166 Chapter 8 - Problem Solving and Product Maintenance EN Resolving scanning problems See the table below to help yo u solve pr oblems with quality of scans. See also “Resolving image quality prob lems” on page 181 and “Resolving paper feed problems” on page 170.
EN Resolving scanning problems 167 Scanner stops in the middle of scanning. The maximum scannable page length is 35 inches (889 mm). If the page is longer, the scanner continues to scan, but it only keeps the first 35 inches (889 mm) of data on the page and discards the rest.
168 Chapter 8 - Problem Solving and Product Maintenance EN Scanned text is not editable. If the item is in the software, the text cannot be edited. The text must be converted using an OCR program (one is included with the product) and then opened in a word-processing program.
EN Resolving scanning problems 169 Items loaded in the document feeder tray fall forward out of the tray. The items are on very lightweight me dia. Do not try to pull the page out, because you can damage the scanner. To remove the page, see “Clearing jams from the scanner path areas” on page 177.
170 Chapter 8 - Problem Solving and Product Maintenance EN Resolving paper feed problems Use the sections listed below re solve paper feed problems: l Clearing jam s from the pr inter path ar eas l Cl.
EN Resolving paper feed problems 171 Use the following table for specific causes and solutions for jams in the printer pat h pa rt s. Problem Cause Solution Pages are coming out of the product curled or wrinkled. Media used in the paper output bin is curled or wrinkled.
172 Chapter 8 - Problem Solving and Product Maintenance EN Scanned items are crooked. The document feeder tray guides might not be adjusted properly. Be sure to center the me dia with the guides. Also, verify that the guides are not adjusted too tightly or too loosely against the media.
EN Resolving paper feed problems 173 The product is feeding multiple sheets or jams frequently from the paper input tray or single- sheet input slot. Guides are not adjusted properly. Additional media was added to the pap er input tray without unloading a nd straightening all of the media first.
174 Chapter 8 - Problem Solving and Product Maintenance EN Clearing feed jams in the paper input areas If most of the jammed media is visible from the paper input tray or single-sheet-input slot, carefully pull the jammed media straig ht up and out of the product u s ing both hands.
EN Resolving paper feed problems 175 2 Remove the toner cartridge. Be sure to protect it from light while it is outside the product. CAUTION Avoid touching the long, black, sponge roller inside the product.
176 Chapter 8 - Problem Solving and Product Maintenance EN 5 If the jam has entered the front o utput slot, grasp the sheet, and carefully pull it straight up and out. 6 If the jam is only visible from the front of the front ou tput slot, raise the front cover part way with one han d.
EN Resolving paper feed problems 177 Clearing jams from the scanner path areas Occasionally, media can become jammed in the document fe eder tray. See “I dentifying ha rdware part s” on page 21 f or more information.
178 Chapter 8 - Problem Solving and Product Maintenance EN Problem Cause Solution The product is feeding multiple sheets or jams frequently from the document feeder tray. The special media lever might be in the incorrect position. Guides are not adjusted properly.
EN Resolving paper feed problems 179 Clearing jams from the scanner path area Use the following procedure to clear jams from the scanner area To clear jams from the sc anner path area 1 Using both hands, pull the docume nt release door ( control panel) toward you.
180 Chapter 8 - Problem Solving and Product Maintenance EN 4 To prevent jams in the future, make sure the special media lever is in the correct position for the document you are loa ding.
EN Resolving image quality problems 181 Resolving image quality problems This section of the manual helps you define and resolve pr int qua lity problems. Often output quality pr oblems can be handled qu ite easily by making sure that your printer is pr operly maintained or by using print media that meets HP specifications.
182 Chapter 8 - Problem Solving and Product Maintenance EN See “Specks” on page 186 See “Stains or smudges” on page 186 See “Horizontal black streaks or smears ” on page 187 See “Repeati.
EN Resolving image quality problems 183 Light print (partial page) The toner cartridg e might be low. Replace th e to ner cartridge. Light print (entire page) 1 If you are printing , us e the Finishing tab in your printer driver to turn EconoMode off.
184 Chapter 8 - Problem Solving and Product Maintenance EN Edges of image not printing The product cannot pri n t all the way to the edge of the media. The product has a minimum margin of 0.25 in (6.4 mm) on each edge. If printing or copying, the reduction setting might be set incorrectly.
EN Resolving image quality problems 185 Faded print or white streaks 1 Check to see if the toner cartridge is getting low on toner. 2 Make sure the media you are using meets HP’s p aper specifications (for example, it might be too moist or too rough).
186 Chapter 8 - Problem Solving and Product Maintenance EN Specks Specks might appear o n a page after a jam has been cleared. 1 Print a few more pages to see if the problem c orrects itself. 2 If this problem occurs frequently, set up your printer to run a cleaning page automatically (see “Cleani ng the print paper path” on page 211 .
EN Resolving image quality problems 187 Horizontal black streaks or smears 1 Check that the toner ca rtr idge is properly installed. 2 Make sure you re moved the entire length of the sealin g tape from the toner cartridge before you installed it. If you did, the toner cartridge might be defective and nee d to be replaced.
188 Chapter 8 - Problem Solving and Product Maintenance EN 4 See the “Repeating image” on page 187 solution below. Toner smear See also “Loose toner” on page 188. 1 Print a few more pages to see if the problem c orrects itself. 2 Try using a different type of paper.
EN Resolving image quality problems 189 Page skew 1 Remove some of the media from the pap er input tray and try printing a f ew more pages to see if the problem cor rects itself. 2 Verify that there are no torn piec es of media inside the printer. 3 Be sure to center the media with the pape r guides.
190 Chapter 8 - Problem Solving and Product Maintenance EN Misformed characters 1 Print a few more pages to see if the problem c orrects itself. 2 Make sure that the environmental s pecifications for the printer are maintained.
EN Resolving image quality problems 191 Vertical white lines 1 Print a few more pages to see if the problem c orrects itself. 2 Make sure that media type an d quality meet HP specifications.
192 Chapter 8 - Problem Solving and Product Maintenance EN Curl or wave 1 Turn over the stack of paper in the tray. Also, try rotating the paper 180 ° . 2 Make sure that media type an d quality meet HP specifications. 3 Make sure that the environmental s pecifications for the printer are maintained.
EN Resolving image quality problems 193 Blank pages If blank pages print occasionally: 1 If you are printing on me d ia th at ha s sm all dim e nsio n s an d you r page is blank, try printing on larger me dia to see where the image is printing. Adjust the margins accordingly.
194 Chapter 8 - Problem Solving and Product Maintenance EN 5 Make sure the media type and quality meet HP specifications. 6 If envelopes are creasing, try storing envelop es so that they lie flat. Tire tracks This defect occurs when the tone r cartridge needs to be changed.
EN Resolving control panel error messages 195 Resolving control panel error messages These control panel error me ssag es are listed alphabetically. Messages are accompanied by ca use for the message and steps to take to resolve the problem.
196 Chapter 8 - Problem Solving and Product Maintenance EN 62.X PRIN TER ERROR The product has experienced an internal hardware error. Disconnect the power cable from the product, wait at lea st 30 seconds, then reconnect the power cable and wait for the product to initialize.
EN Resolving control panel error messages 197 COPY COUN T SET TO 1 The product does not have enough memory to complete the collated copy job. Continue completing the collated copy job. DEVICE BU SY. TRY AGAIN LATER The product is currently in use. Wait for the product to finish the current job.
198 Chapter 8 - Problem Solving and Product Maintenance EN FAX MEMOR Y FULL CANCELING RECEIVE During the fax transmission, the produ ct ran out of memory.
EN Resolving control panel error messages 199 INVALID D ATE An invalid date was enter ed, such as June 35. Reenter the date. INVALID T IME An invalid time was entered, such as 25:99 PM. Reenter the time. JOB SETTI NGS CLEARED The product has cleared job settings.
200 Chapter 8 - Problem Solving and Product Maintenance EN POWER FAI L RECOVERY. CHECKING SYSTEM The product has detected a power failure and is performing a self-test.
EN Resolving control panel error messages 201 RECEIVING FAX BUSY CANCELED FAX The fax line to which you were sending a fax was busy. The product has cancelled sending the fax. Call the recipient to ensure that fax machine is on and ready. Check that you are dialing the correct fax number.
202 Chapter 8 - Problem Solving and Product Maintenance EN Common Macintosh problems This section covers the following common Macin tosh problems: l Problems in the Ch ooser l Printing errors l USB pr.
EN Common M acintosh pr oblems 203 Problems in the Chooser Note For more informa tion about the Choo ser, see the Mac OS Help on your computer. Problem Cause Solution The printer driver icon, scan icon, or fax icon does not appear in the Chooser. Software was not installed correctly.
204 Chapter 8 - Problem Solving and Product Maintenance EN Printing errors For more information ab out the Chooser, see the Mac OS Help on your computer. USB problems Use the table below to solve problems that might occu r if the product is connected.
EN Common M acintosh pr oblems 205 The HP LaserJet USB product does not appear in the Macintos h Chooser after the driver is selected. This problem is caused by either a software or hardware component. Software trou bleshooting Check that your Macintosh supports USB.
206 Chapter 8 - Problem Solving and Product Maintenance EN Selecting an alternate PPD You can select an alternate PostScript Printe r Description (PPD). PPDs, in combination with the printer driver, acce ss the printer features and allow the computer to communicate with the product.
EN Common M acintosh pr oblems 207 6 Click Select PPD. 7 Find the desired PPD in the list and click Select. If the desired PPD is not listed, choose one of the following options: • Select a PPD for a printer with similar feat ures. • Select a PPD from another folder.
208 Chapter 8 - Problem Solving and Product Maintenance EN Problem Cause Solution The job prin ts i n Courier (the printer’s default typeface) instead of the typeface you requested. The requested typeface is not downloaded. A personality switch may have been performed to print a PCL job just before the PS printing job was received.
EN Restoring the factory defaults 209 Restoring the factory defaults If you would like to change all default setting s back to the factory default settings, including the fax header and comp any name, following the instructions below. To reset the product 1 Press E NTER /M ENU .
210 Chapter 8 - Problem Solving and Product Maintenance EN Uninstalling the software Use the procedures in this section to rem ove the HP LaserJet 3200 software from a Windows-compatible comp uter and Macintosh- compatible computer.
EN Product Maintenance 21 1 Product Maintenance This section provides the following topics: l Cleaning the print paper pa th l Cleaning the scanne r path l Recalibrating the scanner l Managing HP Lase.
212 Chapter 8 - Problem Solving and Product Maintenance EN The device displays the message IN CLEANING MO DE until this process is co mpleted..
EN Product Maintenance 213 Cleaning the scanner path You might need to clean parts of the sca nne r if the ink on items you are scanning can be smudged with your han d, or if the items have excessive amounts of dust or dirt on them. You might also need to clean these parts if there ar e sm udges or other marks on documents or scans of documents .
214 Chapter 8 - Problem Solving and Product Maintenance EN CAUTION If you must use alc oh ol, only use a ve ry sm all am o un t. Exp os ing internal parts to drippin g alcohol can damage them. 3 If the long strip of gla ss opposite the long, white strip is dirt y, clean it with a dry cotton swab.
EN Product Maintenance 215 5 Near the top, inside edge of the document release door, inspect the three pressure feet and pads for dirt or debris. If they are dirty, clean them with a lint-free cloth dam pened with a small amount of alcohol.
216 Chapter 8 - Problem Solving and Product Maintenance EN Recalibrating the scanner The HP LaserJ et 3200 pr oduct was calibra ted at the factory. However, you may need to recalibrate the scanner if you notice t hat sent faxes, copies , or items sc ann e d to th e com p ut er hav e black or white lines running th ro ug h th em .
EN Product Maintenance 217 been discarded in the world’s land fil ls. To join this recycling effort, follow the instructions provided in the box that cont ains the new toner cartridge. Extending toner life by redistributing toner Areas of faded print are often an indicator that the tone r cartridge is near the end of its toner life.
218 Chapter 8 - Problem Solving and Product Maintenance EN To redistribu te to ne r 1 Press the two printer door release la tches and open the printe r door.
EN Product Maintenance 219 4 Hold the cartridge by the handle, with the arrows facing the product, and slide the cartridg e into the black grooves in the product. Rotate the cartridge firmly into place, close the printer door, and close the front paper path door.
220 Chapter 8 - Problem Solving and Product Maintenance EN Using Memory (DIMMs) The product has three slots for DIMMs (Dual in-lin e memory module). You can find the DIMMs by opening the p r inter memory door loca ted on the bac k of the pr oduct.
EN Product Maintenance 221 3 Remove the DIMM chip from the anti-static bag in which it came by grasping the chip on the top ed ge. 4 Position the DIMM chip over the outermost slot located closest to the printer memory door . The gold contacts should be pointing down and the cutouts should be on the left side.
222 Chapter 8 - Problem Solving and Product Maintenance EN 6 Lock the cam latches into place by pressing the handles towards each other. 7 Close the product memory door. Testing the DIMM installation To verify that the produ ct regi stered th e newly installed DIMM, p rint a configuration report.
EN Product Maintenance 223 Removing DIMMs To remove DIMMs, follow the instructions below: CAUTION Static electricity can damage DIMMs. When handling DIMMs, either wear a grounded an ti-static wrist strap , or frequently touch the sur f ace of the DIMMs’ antistatic packag e, then touch bare metal on the product.
224 Chapter 8 - Problem Solving and Product Maintenance EN 4 Grasp the DIMM chip on the top edge, gently pull straigh t up, and then remove the chip from the product.
EN Product Maintenance 225 Installing a new document scanner separation pad The docum ent scanne r separation pad is a use r-replacab le part tha t is ordered as part of a kit for the HP LaserJet 32 00 produ ct.
226 Chapter 8 - Problem Solving and Product Maintenance EN.
EN Introduction 227 Specifications Introduction This section co ntains prod uct specificat ions and regu latory information..
228 Chapter A - Specifications EN Product specifications This section provides the following specifications for the HP LaserJet 3200 product: l Overall specifications l Faxing specifications l Printing specifications l Copying specifications l Scanning specifications Overall specifications Physical Height 10.
EN Product specifications 229 Faxing specifications Printing specifications Description Specification Fax transmission speed 3 seconds/page (ITU -T Test Image #1) Margins for printed pages .
230 Chapter A - Specifications EN Copying specifications Scanning specifications Description Specification Copy speed 9 ppm Multiple copies Up to 99 per job Copy reduction or enlargements 25 to 200% Acoustic emissions (Per ISO 9296) while copying 6.3 Bel sound power level Description Specification Margins for scanned items .
EN Paper specifications 231 Paper specifications HP LaserJet printers produce excellent print quality. T his printer accepts a variety of media, such as cut-sheet pap er (including recycled paper), envelope s, labels, transparencies, vellum, and custom-size paper.
232 Chapter A - Specifications EN Paper weight equivalence table (approximate) The following table shows equivalent weig hts for different grad es of paper you load for printing, cop y output, and in coming faxes. Use this table to determine equivalent points in weight s pecifications other than U.
EN Transportation 233 Transportation Refer to Non-operating Magnetic Field Emissions, IATA Packagin g Instructions 902 Laser safety statement The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976.
234 Chapter A - Specifications EN FCC regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC r u les. These limits are designed to provide reasonable protection ag ainst harmful interference in a residential installation.
EN FCC part 6 8 requiremen ts 235 FCC part 68 requirements This equipment complies with FCC rules, Part 68. On the back of this equipment is a label tha t contains, a mong other info rmatio n, the FCC registration number an d ringer equivalence number (REN) for this equipment.
236 Chapter A - Specifications EN The following repairs can be do ne by the customer: Replace any original equipm ent that came with the product. This includes the toner cartridg e, the supports for trays and bins, the power cord and the telepho ne cor d.
EN IC CS-03 re quirements 237 IC CS-03 requirements NOTICE: The Industry Canada label identifies certified equip ment. This certification mean s that the equipment meets certain telecommunications netwo r k protective, operational, an d safety requirements as prescr ibe d in the appropriate Terminal Equipment Technical Requirement document(s) .
238 Chapter A - Specifications EN Regulatory information for European Union countries This equipment has been design ed to wor k in all of the countries of the European Economic Are a (Public Switched Telephon e Networks) only. Network compatibility is dependent on internal software settings.
EN Declaration of conformity 239 Declaration of conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name : Hew lett-Packard Company Manufacturer’s Address : 11311 Ch inden Bouleva.
240 Chapter A - Specifications EN Canadian DOC regulations Complies with Canadian EMC Class B requirements. Conforme á la classe B des normes canadiennes de compatibilité électromagnétiques.
EN Environmental produ ct ste w ardship progr am 241 Toner consumption Depending on the type of printer driver you ha ve , yo u may be able to select a “draft” mode, which uses about 50% less to ner, thereby extending t he life of the toner cartri dge.
242 Chapter A - Specifications EN Returns For a more enviro nmentally responsible return of used cartridges and consumables, HP encourages the use of bulk r eturns. Simply bundle two or more cartrid ges or consumables together and u s e the single, pre-paid, pre-addressed United Parcel Service (UPS) label that is supplied in the package.
EN Material safety data sheet 243 Material safety data sheet The Material Safety Data Sheets (MSDS) for the toner cartridge and print drum ca n be obtaine d by going to HP’s website at http:// www.hp.com/go/msds and selecting HP Lase rJet Printer Supplies .
244 Chapter A - Specifications EN.
EN Warranty information 245 Service and Support Information Warranty information Hewlett-Packard limited warranty statement HP LaserJet 3200 product ONE-YEAR LIMITED WARRANTY 1 HP warrants to you, the.
246 Chapter B - Service and Support Information EN 5 Warranty does not apply to defects resulting from (a) impr oper o r inadequate maintenance or calibration; (b) software, interfacing, parts or supp.
EN Warranty information 247 Obtaining hardware service If your hardware should fail during the war r anty period, HP offers the following support optio ns: l HP repair s ervices. You can return the prod uct to an HP repair center, depending on your location.
248 Chapter B - Service and Support Information EN Service information form Who is returning the equipm ent? Person to contact: Date: Phone: Alternate contact: Phone: Return shipping address: Special shipping instructions: What is being sent? Model number: Serial number: Please attach any relevant printouts when r eturning equipment.
EN Software license agreement 249 Software license agreement ATTENTION: USE OF THE SOFTWARE IS SUBJECT TO THE HP SOFTWARE LICENSE TERMS SET FORTH BELOW. USING THE SOFTWARE INDICATES YOUR ACCEPTAN CE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU CAN RETURN THE SOFTWARE FOR A FULL REFUND.
250 Chapter B - Service and Support Information EN Termination . HP may terminate your license upon notice for failure to comply with any of these L icense Terms. Upo n termination, you must immediately destroy the software, toge ther with all copies, adaptations, and merged portions in any form.
EN HP Customer C are 251 HP Customer Care Along with your product, you receive a vari ety of supp ort services from Hewlett -Packard and our support partners de signed to give you the results you need, quickly and professionally. Online Services: for 24- hour access to information over your modem, we suggest these services.
252 Chapter B - Service and Supp ort Information EN Customer Care Options W orldwide In addition to the p hone numbe rs listed below , the “HP sales and ser vice offices” section o n page 253 contains worldwide sales and ser vice addresses and phone n umbers.
EN HP sales and service offices 253 HP sales and service offices Before calling an HP Sales and Service office, be sure to contact the appropriat e Customer Support Cen ter number listed in “HP Customer Care” on page 251. Products shou ld not be returned to the offi ces listed below.
254 Chapter B - Service and Supp ort Information EN Finland France Hewlett-Packard Oy Piispankalliontie 17 FIN-02200 Espoo Phone: (358) (9) 887-21 Fax: (358) (9) 887-2477 Hewlett-Packard France 42 Qua.
EN HP sales and service offices 255 Middle-East Region Netherlands Hewlett-Packard Middle-East P.O.-Box 17295 Jebel Ali Free Zone Dubia, UAE Phone: (97) 14 88 15 456 Fax: (97) 14 88 14 529 Hewlett-Pac.
256 Chapter B - Service and Support Information EN Sp ain S weden Hewlett-Packard Española, S.A. Carretera de la Coruña km 16.500 E-28230 Las Rozas, Madrid Phone: (34) 91-6311600 Fax: (34) 91-631183.
EN Ordering parts 257 Ordering parts To order part s: l Visit HP’s website at http://www.partsdirect.hp.com l In the U.S., call HP Direct Ordering at (800) 538-8787 fo r most items.
258 Chapter B - Service and Support Information EN JetDirect print servers HP JetDirect print servers Compatible with the HP LaserJet 3200 product. 70X (J4155A), 170X (J3258B), 300X (J3263), or 500X (J3265) Supplementary documentation Print Media Guide for HP LaserJet printers A guide to using paper and other print media with H P LaserJet printers.
EN Ordering software 259 Ordering software To order the software if your CD is da maged or m issing, contac t Hewlett-Packard Support. In the United Sta tes and Canada: Request by Internet Request by Phone: Request by Fax: Request by Mail: http://www.
260 Chapter B - Service and Support Information EN.
EN 261 Glossary 10-Base T A type of Ethernet network that uses twisted pair cabling to attach nodes to the network. 100-BaseTX A type of Ethernet network, also known as Fast Ethernet, that uses twisted pair cabling to at tach nodes to the network.
262 Chapter - Glossary EN BNC A type of network connector generally used with coaxial network cabling. A BNC connector has two slots that lock onto two matching knobs on a network inter face card wh en you twist th e connector. brightness A measure of the over all intensity of th e image.
EN 263 .dcx A multi-page .PCX format where each page is a .PCX file. Since this is a multi-page format, it is widely used for rece iving and sending faxes to and from the computer. A single DCX document ca n store up to 1,023 pages. dedicated line A single telephone line that is used exclusively for eithe r voice calls or fax calls.
264 Chapter - Glossary EN fax An abbreviation for facsimi l e. The electronic encoding of a printed page and the transmission of the electron ic page over a telephone line. The product software can send items to e lectronic fax pro grams, which require a modem an d fa x software.
EN 265 connector. For the HP LaserJet 3200 product and its supported HP JetDirect external prints servers, the co nnector can be 10-BaseT, 10/ 100BaseTX, BNC, or token ring. HP LaserJet Director toolbar An HP LaserJe t 3200 prod uct software sc reen used when working with documents.
266 Chapter - Glossary EN NetBEUI (NetBIOS Extended User Interface) The network transport protocol used by all of Microsoft' s network systems and IBM's LAN Server based systems. In order for the HP LaserJet 3200 product to work on the ne twork, you must have the TCP/IP or IPX/SPX network protocol running in ad dition to NetBEUI.
EN 267 print server See HP JetDirect print server . printer d river A printer driver is a p r ogram that ena bles your applications to access your product’s features.
268 Chapter - Glossary EN summary information Information about the item, such as creator or keywords, that you can add to an item in the Summar y Information dialog bo x to help you find the item quickly. TCP/IP The de facto sta ndard Ethernet proto col.
EN 269 Windows sharing A method of peer-to-peer ne twor king that uses Windows products. If you have a network installed, you can share resources w ith your co- workers, most commonly the HP LaserJet 3200 produ ct, printers, and hard disks, by simply using Windows tools such as Explorer and Pri nt Manager.
270 Chapter - Glossary EN.
EN Index 271 Index A access codes, dialing 55 accessories and supplies 251 acoustic emissions 230 activity logs, printing 43 adding memory 220 paper 29 ad-hoc groups, faxing to 58 adjusting automatic .
272 Index EN languages, display panel 41 resolution, faxes 62 resolution, printer 115 ring pattern 91 settings, default 37 volume 39 characters dropouts 184 entering from control panel 78 formatting c.
EN Index 273 reducing 123 scanning during 14, 16 specifications 230 speed 230 troubleshooting 164 cover sheet 100 creases, troubleshooting 193 curling preventing 31, 171 troubleshooting 192 custom siz.
274 Index EN Draft quality 126 drivers, printer part numbers 258 requirements for 103 dropouts, character 184 duplexing instructions for 1 12 troubleshooting 161 duty cycle printer 229 scanner 230 toner cartridges 216 E EconoMode 111 ECP ports 161 edges not printing 184 electrical specifications 228 electronic mail.
EN Index 275 receiving to computer 99 reports, printing all 50 reprinting 66 requesting 88 resolution defaults, adjusting 81 resolution job settings, adjusting 62 sending 55, 57 stamping, enabling 96 .
276 Index EN H headers, fax changing 79 menus for 20 heavy media duplexing 112 equivalence table 232 output path for 31 printing on 110 height 228 horizontal printing 28 HP authorized service provider.
EN Index 277 JetDirect print servers HP LaserJet Director 32 ordering 258 requirements for 103 Job Status, canceling faxes from 64 K key press volume, adjusting 40 keypad overlay, part number 257 keys, control panel 18 keys, numeric.
278 Index EN Mexico, website for 242 Microsoft Excel files. See Excel files Microsoft Power Point files. See Power Point files Microsoft Windows. See Windows Microsoft Word files. See Word files mirror, contaminated 191 misaligned print, troubleshooting 171 misfeeds.
EN Index 279 duplexing sizes 113 heavy, output path for 31 heavy, printing on 110, 112 irregular, loading 27 loading 26, 28 narrow, troubleshooting 1 87 ordering 258 output path, selecting 31 recycled.
280 Index EN printing blocked number logs 48 canceling 111 configuration report 48 copying during 14, 16 double-sided 112 envelopes 108 fax activity logs 43 faxing during 14, 16 letterhead 107 menu st.
EN Index 281 reports configuration 48 fax call 45 menu structure 47 one-touch numbers 47 printing all 50 speed-dial 47 T.30 protocol trace 50 unwanted 152 Reports menu 20 reprinting faxes 66 resolutio.
282 Index EN copy quality, adjusting defaults 126 error correction 97 extension phones 93 factory defaults, restoring 41 fax call reports 45 logs, automatic printing 44 menus for 20 one-touch reports .
EN Index 283 stopping faxes 64 print jobs 111 storing group-dial codes 74 one-touch keys 74 paper 171 product 228 speed-dial codes 70 streaks, troubleshooting 185, 187 Superfine resolution 62 supplies recycling 241 returning 241 supplies and accessories 251 Support Assistant compact disc 251 support, customer.
284 Index EN loose toner 188 misaligned print 171 MS-DOS printing 163 narrow media 187 not responding 160 OCR 168 one-touch buttons 153 page order 159 paper 173 parallel ports 152 PBX systems 153 prin.
.
Cop yr ight 2001 Hew let t-P ack ard compan y http://www .hp.com/support/lj3 200 %.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) 3200m (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) 3200m heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) 3200m vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) 3200m leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) 3200m krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) 3200m bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) 3200m kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) 3200m . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
