Gebruiksaanwijzing /service van het product 4200L Series van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 20
start start z ačínáme alapismeretek hp L as erJet 4 200L se r i es.
1 © 2003 Copyright Hewlett-P ackard De velopment Company , LP Reproduction, adaptation or translation without prior wr itten permissio n is prohibited, except as allow ed under the copyright laws. The information contained herein is subject to change without notice.
2 1 547 mm (21.5 inches) 1045 mm (41.1 inches) 412 mm (16.2 inches) HP LaserJet 4200L series HP LaserJet 4200L series W ARNING! The pr inter is heavy . T o prev ent physical injury , two people should lift and mov e the printer. Prepare the location. Place the printer in a well-ventilated room on a sturdy , lev el surface .
English Čeština Mag yar Po l s k i 3 2 Make sure that the location has an adequate p ower supply . Check the voltage r ating on your printer (locat ed under the top cov er). The power supply will be either 110 to 127 V ac or 220 to 240 V ac, 50/60 Hz.
4 3 1 2 3 5 4 Check the package contents. Make sure that all the parts are included. 1) Printer ; 2) Right-angle power cord; 3) Control panel ov e rlay (this part might already be installed on the printer .); 4) Print car tr idge; 5) Software and documentation on CD-ROM.
English Čeština Mag yar Po l s k i 5 4 5 6 2 3 1 7 4 8 9 13 12 11 10 14 Identify printer parts. F ront view: 1) Control panel; 2) Tr a y 1 ; 3) Paper lev el i ndicator ; 4) Tr a y 2 ; 5) Standard ou.
6 5 Remove the packing materials. 1) Remove the shipping bag and an y orange tape from the front and back of the printer . 2) Open the printer top cov er and remov e the f oam packing material inside. 3) Remov e the plastic film from the control panel display .
English Čeština Mag yar Po l s k i 7 2 3 6 4 5 Install the print car tridge . 1) Remov e the print car tr idge from its packaging. 2) Bend and then pull the sealing tab from the end of the print car tridge to remov e the entire length of the tape. CA UTION: Av oid touching any blac k toner on the tape.
8 1 3 2 4 7 5 6 Install any optional accessories. Use the separate installation instructions to install any accessories that you hav e purchased with the printer .
English Čeština Mag yar Po l s k i 9 8 1 3 2 Load T ray 2. (F or inf ormation about loading other trays, see the use guide on the CD-ROM.) 1) Pull tra y 2 completely out of the pr inter . 2) Pinch the release on the left guide and slide the guides to the correct paper size.
10 4 5 4) Rotate the blue knob on the right side of the tray to the correct paper size. (T ur n the knob to “ST AND ARD” for L TR, A4, LGL, EXEC, A5, and JIS B5 paper sizes, or to “CUST OM” for custom paper sizes.) 5) Load paper into the paper tra y with the top edge of the paper f acing the front edge of the tray .
English Čeština Mag yar Po l s k i 11 9 1 Connect an interface cable. T o connect the pr inter directly to a computer : 1) Connect an IEEE 1284-compliant (size “B”) parallel cab le between the parallel port on the computer and the pa rallel por t on the printer .
12 10 3 Connect the right-angle power cord. 1) Check the v oltage rating on your printer (located under th e top cov er). The power supply will be either 110 to 127 V ac or 220 to 240 V ac, 50/60 Hz. (This is the second time you are checking the voltage .
English Čeština Mag yar Po l s k i 13 11 12 Install the control panel overlay (optional): 1) If necessary , remove the ov er lay that is currently installed on the printer by inserting a thin, r igid object such as a credit card under the top edge of the overla y and then pulling up on the ov erlay until it comes off .
14 13 14 Set the control panel language . Use the (Up arrow) and (Down arrow) to scroll to a language you w ant and press (Select) to select it. (T o change the language after it has been set, see the use guide on the CD-ROM). T est the printer . T o verify that the printer is operating correctly , pr int a configuration page.
English Čeština Mag yar Po l s k i 15 15 Note: If the configuration page does not print, make sure that there are no messages (other than READY ) on the control panel display , that the Ready light (top light) is o n, and that no other lights are o n or blinking.
16 16 17 T est the software installation. Pr int a page from any program to make sure the software is correctly installed. Note: If installation f ails, reinstall the software. If reinstallation f ails, see the Readme on the CD-ROM, see the suppor t flyer that came in the printer box, or visit http://www .
English Čeština Mag yar Po l s k i 17 18 Congratula tions. Y our printer is ready to use. For inf ormation about u sing the printer and troubleshooting, see these source s: 1) The use guide on the CD-ROM; 2) This URL: http://www .hp.com/support/lj4200 ; 3) HP Customer Suppor t (See the suppor t flyer that came in the printer box.
18.
© www .hp.com/su pport/lj4 200 2003 He wlett-P ack ard De velopment C ompany , L .P . Q3 99 3-909 04 *Q3993-90904* *Q3993-90904*.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) 4200L Series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) 4200L Series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) 4200L Series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) 4200L Series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) 4200L Series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) 4200L Series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) 4200L Series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) 4200L Series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
