Gebruiksaanwijzing /service van het product 441877-00F van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 67
HP Pr oL ian t Netw or k A dapt er So f tw ar e and C onf igur ati on Guide Part Number 441877-00F March 2008 (Sixth Edition).
© Copyright 2005, 2008 Hewlett-Packard Develop ment Company, L.P. The information contained herein is subject to chan ge without no tice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such produc ts and services.
Contents 3 Con te nt s Overv iew ..................................................................................................................................... 5 Supported adapters and operating systems..........................................
Contents 4 Technical suppo rt .............................................................................................................. .......... 63 Before you contac t HP .........................................................................
Overview 5 Ov er v ie w Supported adapters and operating systems The following is a list of HP NC-Series adapters that are support ed on HP ProLiant servers.
Overview 6 • HP NC7770 PCI-X Gig abit Server Adapter • HP NC7771 PCI-X Gig abit Server Adapter Embedded adapters : • HP NC105i PCIe Gigabit Server Adapter • HP NC320i PCI Express Gigabit Serve.
Overview 7 • Windows Server 2003 x64 Editions • Windows® 2000 (NDIS5) • DOS NDIS2* NetWare • NetWare 6.5 Server • NetWare 6.6 Server • NetWare Open Enterprise Server Linux 32 • Red Hat .
Overview 8 • Microsoft® Window s Server 2008 WIN2008x64 • Microsoft® Window s Server 2003 WIN2003 • Microsoft® Window s Server 2003 x64 WIN2003x64 • Microsoft® Window s® 2000 WIN2000 • Linux LINUX Documentation in the HP SoftPaq • HP Network Adapter Software and Configuration Guide (NACONFIG.
Installation 9 Inst allati on Downloading files 1. Go to the HP website ( http://www.hp.com ). 2. Click Software & Driver Downloads from the left menu bar. 3. Type the product name in the For product box and press Enter . For example, type NC373T.
Installation 10 1. On the desktop, click Start and select Settings > Control Panel > Administrative Tools > Computer Management to display the Computer Management window. 2. Click Device Manager and then scroll down the list of hardware devices to Network Adapters and click the plus (+) .
Installation 11 Windows 2008 x64 drivers The following Windows Server 2008 x64 network adapter drivers ar e used in this relea se: • N1G6032E.sys for NC310F, NC340T, NC61xx, and NC71xx server adapters • Q57ND60A.sys for NC105x, NC150x, NC32x, NC10xx, NC67xx, and NC77xx server adapters • BXND60A.
Installation 12 Components for these drivers are located in the WIN2000 dir ectory in the HP SoftPaq file. Adapter support on Linux The following Linux drivers are available for HP adapters: • bnx2.
Installation 13 Parameter Options Description CheckSum = Default = ON Selections are: ON, OFF, Tx, Rx Enables or disables the transmit and receive checksum off-loading feature. Checksum is supported under NetWare 5.x only. If you want to enable the CheckSum parameter, you need to load it on the first instance.
Installation 14 Parameter Options Description Jumbo = Set maximum physical receive packet Size = 18000 in the STARTUP.NCF. Choices are Jumbo = 1514–9000. T his keyword is only supported on NetWare 6.x. Enables/disables Jumbo Frame support. When enabled, jumbo packets of up to 9000 bytes are supported.
Installation 15 When an adapter configuration is saved, the NetWar e install program adds load and bind statements to the autoexec.ncf file. By acce ssing this file, you can verify the p arameters configured fo r each adapter, modify them, or enter additional parameters.
Installation 16 # BIND IPX Q57_1_E82 NET=FAFD3D25 # LOAD Q57 SLOT=2 FRAME=Ethernet_802.3 NAME=Q57_1_E83 # BIND IPX Q57_1_E83 NET=5A2D8D6D # LOAD Q57 SLOT=2 FRAME=Ethernet_SNAP NAME=Q57_1_ESP # BIND IPX Q57_1_ESP NET=477A35BD # LOAD Q57 SLOT=2 FRAME=Ethernet_II NAME=Q57_1_EII # BIND IPX Q57_1_EII NET=C3C8F2E4 # BIND IP Q57_1_EII ADDR=172.
Installation 17 Where n = 10 or 100 or 1000 o Default = The adapter automatically detects network speed. • NODE. This keyword specifies a locally administered address (LAA) unique to each adapter. Use this option to provide your own unique node addre ss for the adapter.
Installation 18 Advanced Network Services help - supported keywords • AGG_SELECTION o Syntax: AGG_SELECTION=[BANDWIDTH | COUNT] o Description: Sets active aggregator selection mode by bandwidth or c.
Installation 19 • PRIMARY o Syntax: primary | secondary o Description: Identifies the primary adapter. Supported only in BIND command • PROBE_BURST_SIZE o Syntax: probe_burst_size=nnn o Descriptio.
Installation 20 o Description: Supported on ly after Commit command • SECONDARY o Syntax: primary | secondary o Description: Identifies the secondary ada pter.
Firmware upgrade utility 21 F ir m w ar e upgr ade utility HP Multifunction Gigabit Server Adapter Firmware Upgrade Utility The HP Multifunction Gigabit Server Adapter Firmwa re Upgrade Utility supports the following adapters. • NC37xx • NC380x The utility runs under DOS from a bootable diskette or US B drive.
Firmware upgrade utility 22 • HP NC373i Multifunction Gigabit Server Adapter • HP NC373m Multifunction Gigabit Server Adapter The ccfwupg2.bat command upgrades the Boot Code and Option ROM firmwar.
Firmware upgrade utility 23 where, o -i indicates the interface command o NX_NIC specifies the int erface, NX_NIC, NX_NIC1, e tc. (must be upper case) o --all updates all of the firmware While upgrading, you should notice that a back up fi le of the current firmware is generated.
Adapter configurations 24 A dapter conf igur ati ons HP NC-Series 10GbE Adapters The following information describes the adapter prop erties available for HP NC-Series 10GbE adapters in the Windows operating system. See the HP Nework Configuration Utility online h elp for the properties available through the NCU.
Adapter configurations 25 Property Parameter Locally Administered Address Enables users or administrators to set the Lo cally Administered Address. This address overrides the permanent address of the adap ter (that may have been flashed to the hardware).
Adapter configurations 26 Property Parameter Status Ring Size A descriptor ring size (queue size) for the status given by the network adapter to the driver. Setting this value too low will impact t he throughput because the network adapter will start dropping packets.
Adapter configurations 27 • Disabling—Each adapter can be disabled independently. Configuring multiple ports on 10GbE adapters HP multiple port adapters—such as the NC512m Dual Port 10 GbE Multifunction BL-c Adapter—have multiple ports on a single card.
Adapter configurations 28 2. Execute the following command to disable PXE functionality: nxflash -i NX_NIC<Device #> --opt-rom-off Complete the following step s to enable or disable PXE functionality for Linux. 1. Execute the following comm and to enable PXE functionality: nxflash -i eth<#> --opt-rom-on 2.
Adapter configurations 29 Troubleshooting Unable to boot host system on Windows or Linux Problem: Unable to boot the host system with the network adapter installed on Windows or Linux operating systems. Troubleshooting: • Remove the network adapter and reboot.
Adapter configurations 30 HP NC-Series Broadcom adapter pro perties • Flow Control. The Flow Control property allows th e user to enable or disable the receipt or transmission of PAUSE frames. PAUSE frames en able the adapter and the switch to control the transmit rate.
Adapter configurations 31 o 1 Gb Full Auto. Sets the speed to 1 Gbps and mode to Full-Duplex o 10 Mb Full. Sets the speed to 10 Mbps and mode to Full-Duplex o 10 Mb Half. Sets the speed to 10 Mbps and mode to Half-Duplex o 100 Mb Full. Sets the speed to 100 Mbps and mode to Full-Duplex o 100 Mb Half.
Adapter configurations 32 Windows Server 2003 and Windows Server 2003 x64 configurations Although the default values should be appropriate in most cases, you may change any of the available options to meet the requirements of your specifi c system.
Adapter configurations 33 • Speed & Duplex. The Speed & Duplex property allows the user to set the connection speed to the network and mode. The Duplex Mo de allows the adapter to transmit and receive network data simultaneously. The adapter is set to Auto (optimum connection) by default.
Adapter configurations 34 o None. Disables chec ksum offloading o Rx TCP/IP Checksum. Enables receive TCP, IP, and UDP checksum offloading o Tx TCP/IP Checksum. Enables transmit TCP, IP, and UDP checksum offloading o Tx/Rx TCP/IP Checksum. (Default) Enables transmit and receive TCP, IP, and UDP checksu m offloading • Ethernet@WireSpeed.
Adapter configurations 35 the type of frame that will cause the adapter to wake up, select the appropriate option from the Value drop-down list on the Adva nced tab. This property is not supported on NC150T adapters. o Both. (Default) Selects both Magic Packet and Wake up Frame as wake up frames o Magic Packet .
Adapter configurations 36 o Default for NC6170 and NC7170 adapters = No Action o Range for NC6170 and NC7170 adapters = Disabled; Enabled; Hardware Default; No Action • Flow Control. Determines the type of flow control that is needed. Flo w control enables the transmission of PAUSE frames.
Adapter configurations 37 • Locally Administered Address. Specifies the user-defined MA C Address of the adapter, which overrides the burned-in MAC Address. This box is disabled if the selected adapter has been teamed. o Default = Not Present o Range: Value; Not Present • Log Link State Event.
Adapter configurations 38 for auto-negotiation. If this feature is on, and the speed is not set to auto-negotiation, the driver will wait for a short time for link to complete befor e reporting the link state. o Default = Auto Detect o Range = Auto Detect; Off; On • Wake on Link Settings.
Adapter configurations 39 o Auto. (Default) Auto detect flow control o Disable. PAUSE frame receipt an d transmission is disabled o Tx PAUSE. PAUSE frame transmission is enabled o Rx PAUSE.
Adapter configurations 40 o Range = Off; On • Offload Transmit TCP Checksum. Offloads the task of computing the checksu m for outgoing TCP or UDP packets, thereby improving performance. o Default = On o Range = Off; On • Offload Transmit IP Checksum.
Adapter configurations 41 Boot Agent The Intel® Boot Agent is a software product that allo ws your networked client co mputer to boot using a program code image supplied by a remote server.
Adapter configurations 42 To customize the behavior of the Bo ot Agent software in a pre-boot PXE or RPL environment complete the following steps: 1. Press the Ctrl+S keys immediately after the initializati on message appears. A configuration setu p menu appears allowing you to set configuration valu es for the Boot Agent.
Adapter configurations 43 Configuration settings Possible values Description Show Setup Prompt • Enabled • Disabled Controls whether or not the Boot Agent displays the Ctrl+S prompt after POST.
Adapter configurations 44 Use IBAUtil to enable or disable WOL or Boot Ag ent features. To obtain this utility download the HP ProLiant Networking SoftPaq as desc ribed in "Downloading files (on page 9 )" and navigate to the APPSBOOTAGNTN100X directory.
Adapter configurations 45 Parameter Description -UPGRADE or -UP Downloads the Boot Agent st ored within IBAUtil to the adapters in the system. -FLASHENABLE or -FE Enables Boot ROM. Saves -FLASHDISABLE or -FD Disables Boot ROM. -SAVE Saves existing Intel Boot Agent and EEPROM settings to a file.
Adapter configurations 46 • 2–Invalid adapter • 3–Bad command line parameter • 4–EEPROM chec ksum failure • 5–EEPROM read failure • 6–EEPROM write fail ure • 7–EEPROM dump fail.
Adapter configurations 47 • PXE-E01: PCI Vendor and Device IDs do not match! Image vendor and device ID do not match those loca ted on the card. Be sure the correct flash image is installed on the adapter. • PXE-E04: Error reading PCI configuration space.
Adapter configurations 48 • PXE-EC1: Base-code ROM ID structure was not found. No base code can be loca ted. An incorrect flas h image is installed or the image has becom e corrupted. Try to update the flash image. • PXE-EC3: BC ROM ID structure is invalid.
Adapter configurations 49 If you are having problems with the local (client) or networ k operating system, contact the operating system manufacturer for assistance. If you are havi ng problems with some appl ication program, contact the application manufacturer for assistance.
Adapter configurations 50 team members. Af ter you press the D key, the information remains displayed until you reboot your computer. Actual diagnostics information may vary, dependin g upon the adapter(s) installed in your computer.
Adapter configurations 51 o Range = 1– 32 • Flow Control Settings. The Flow Control property allows the user to enable or disable the recei pt or transmission of PAUSE frames. PAUSE frames en able the adapter and the switch to control the transmit rate.
Diagnostics 52 Di agnos tic s HP NC-Series NetXen 10GbE diagnostics Please note that network traffic will be interru pted while you are r unning diagnostic tests.
Diagnostics 53 For CX4 (copper interface) applications an external module is required to co nnect the four transmit lanes to the four corresponding receiv e lanes. This module must contain all of the associated handshake signals required to redirect the four transm it lanes to the four receive lanes.
Diagnostics 54 This tests the external link connection. For the fibe r mediu m, this is simply another external loopback test. For the copper medium, this is not applicable. Group B: Memory tests Various patterns (0x55aa55aa, 0xaa55aa55, & address) are used to test each of the memory blocks.
Diagnostics 55 • C6. NVM access and reset-corruption tests This tests the non-volatile memory access (both re ad and write). It also tests for appropriate access arbitration among multiple entities (CPUs). Another test is to check to issue chip reset while NVM block is servicing data to look for any NVM data corrup tion.
Diagnostics 56 • D6. RPC test (D06) This test checks the r eceive catch-up path b y sendin g packets to a different Tx chain. T he packets will go through the RPC logic and return to the receive buffers as Rx packets. The integrity of each packet is checked to ensure no data corruption.
Diagnostics 57 o Pseudo random data test: A pre-calculated pseudo random dat a is used to write a unique data into each test RAM. After the first pass of the test, the progra m reads back one more time to ensure data stays correct. • B2. BD SRAM test This tests the BD SRAM by perf orming the tests as described in test B1.
Diagnostics 58 The content of VPD is saved first before performing the test. After it is saved, the test writes one of the five pattern test data, 0xff, 0xaa, 0x55, incremen t data, or decrement data, into VPD memory. By default, increment data pattern is used.
Diagnostics 59 • Test aborted by user • Tx DMA:Got 0x%08x @ 0x%08x. Expected 0x%08x • Rx DMA:Got 0x%08x @ 0x%08x. Expected 0x%08x • Tx DMA failed • Rx DMA failed • Data error, got 0x%08X a.
Diagnostics 60 • File size %d is too big, max is %d • Invalid %s • Failed writing 0x%x to 0x%x • *1 • *1 • *1 • *1 • Cannot perform task while chip is not runn ing.
Diagnostics 61 3. Type DIAGS and press the Enter key. The test utility program automatically scans the hardware and lists all supported adapters. If you have a multiport adapter, each port is listed separately starting with "Port 1." 4. Using the arrow keys, select the adapter to test then press the Enter key.
Diagnostics 62 The Display Diagnostic Log option allows you to view a detailed report of the tests you just ran. When Diagnostic Log is enabled, test results are recorded in a log file named DIAGS.LOG. If it does not already exist, the test utility creates it.
Technical support 63 T ec hnical su pport Before you contact HP Be sure to have the following inform ation available before you call HP: • Technical support registration number (if applicable) • P.
Technical support 64 • Navigate to a specific product, and then look for support information from the list of support resources at the HP support website ( http://h18007.
Acronyms and abbreviations 65 A c r on y ms and abbr e v iati ons BIOS Basic Input/Output System DHCP Dynamic Host Configuration Protocol IPL initial program load MAC Media Access Control PCI peripher.
Acronyms and abbreviations 66 UNDI Universal Network Driver Interface.
Index 67 B Boot Agent 41 C configuration 24, 50 D diagnostics 52, 53, 56, 60 Diver and software information 7 F Firmware upgrade 21, 22 I installation 9, 10, 12 P properties 32, 50 PXE configuration H.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) 441877-00F (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) 441877-00F heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) 441877-00F vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) 441877-00F leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) 441877-00F krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) 441877-00F bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) 441877-00F kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) 441877-00F . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
