Gebruiksaanwijzing /service van het product 8500 N van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 56
English 8500, 8500 N, 8500 DN Printer *C3983-90901* *C3983-90901* C3983-90901 Getting Started Guide Copyright© 1997 He wlett-P ackard Co. Printed in USA 10/97 Manual Part No.
.
HP Color LaserJet 8500, 8500 N, 8500 DN Printer Getting Started Guide.
Copyright Information © 1997 Hewlett-P ackard Company All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allo wed under the copyright laws.
Contents Where Is the User’ s Guide? . . . . . . . . . . . . . . . . . . . . . . . 2 Additional Reference Ma terials . . . . . . . . . . . . . . . . . . . 2 Step 1: Prep aring a Location for the Prin ter . . . . . . . . . . . . . . . 3 Step 2: Unp acking the Prin ter .
Where Is the User’ s Guide? The printer software includ es the online user’s guide on CD-ROM. Th e online user’s guide provides information at your computer about printer hardw are, troubleshootin g, and customer service.
Step 1: Preparing a Location f or the Printer A Top View (with optional multi-bin mailbox and tray 4) B Front View (wit h optional multi-bin mailbox and tray 4) This printer requires the following: .
Step 2: Unpacking the Printer The follo wing item s are included with the printer: A Toner cartrid ges: black, cyan, ma genta, and yellow B Power cord C Software on CD- ROM D Manuals: getting started .
To unpack the printer 1 Remove all external packin g tape from the printer. 2 Open the lower left door and push down the green lever on the right side of the fuser. Th en, remove the orange shipping notice from the fuser. 3 Open the upper right door and remove the packing tape at the left side of the openin g.
5 Remove the packing material from the lower (gree n) lever. 6 Press the white button on the lower (green) lever and swing the lever to the right. 7 Remove the packing cardboard from inside the printer and then swing the lower (green) lever back to the left, making sure the lever clicks into place.
Note Follow steps 10-13 to attach the five stabilizing legs to the bottom of tray 4. If the five stabilizing legs (which are in addition to the four locking wheels) are already attached, proceed to step 14. 10 Locate the five stabilizing legs that came with the printer.
14 Remove the packing tape from tray 4. 15 Open the media transfer door and remove the orange packin g spacers. 16 Firmly grip the handle in the center of tray 4, squeeze the release lever, and pull the tray out until it stops. 17 Remove the two orange packing clips from inside tray 4 by squeezing the sides of the clips and pullin g them out.
Step 3: Installing the Cables To connect the power cord to a printer with a stand Note Make sure that the printer is off (power button out) before conn ecting the power cord.
To connect the interface cable and power cords for a printer with an optional tray 4 Note Make sure that the printer is off (power button out) befor e attaching the interface cable and connec ting the power cords. 1 Locate the interf ace cable (A), the power pack (B), and the straight power cord (C).
5 Push the two cables extending from the power pack into the space between the printer and tray 4 along the back of the printer. 6 Plug the shorter of the two cables into the connector on the back left corner of the printer. 7 Plug the longer of the two cables into the connector on the back left corner of tray 4.
9 Roll the printer to its permanen t location, where all four whee ls rest on a level floor surface, and stabilize it by pushing the lockin g tabs on the tray’s wheels to the locked position . 10 Rotate the feet of the five stabilizing legs and the anti-tip foot (on the left side of the tray) until they are snug against the floor.
Step 4: Connecting the Printer to the Network If you will connect the com puter to the printer with a parallel cable, see “To connect a parallel cable” later in this Step .
To connect to a 10 Base2 network 1 Attach one section of the ThinLA N (coaxial) cable to a BNC “T” connector. 2 Attach another ThinL AN cable section (A) or, if it is at the end of the network, a 50- Ohm terminator (B) to the other side of the BNC “T” connector.
To connect a parallel cable To print throu gh the parallel port, the printer requir es a 25- pin male/micro 36-pin m ale (“C-size”) parallel cable that is IEEE -1284 compliant. The cable is not included with the printer. It mu st be purchased separately.
Step 5: Changing the Printer Control Panel Over lay and Language (Optional) Replace the printer contro l pan el overlay with the one included for your language, if applicable. The n configure the printer control panel to show printer m essages in your language.
Selecting the Display Language Use the printer control panel to set the printer to display printer messages and print configuration page s in a variety of supp orted languages. To select the printer control panel languag e 1 Hold down [Select] while turning the prin ter on (po wer b utton in).
Step 6: Installing the Consuma bles The follo wing parts (consumab les) are included with the printer: A Imaging Dru m B Black Toner Cartrid ge C Color Toner Cartridges: yello w, magenta, and cyan Ins.
To install the imag ing drum Note Make sure that the printer is off (power button out) before installing the imaging drum. 1 Open the front door of the printer (A). Swing the upper (blue ) lever to the right (B). Pre ss the white button on the lower (green) lever and swing the lever to the right (C).
To install the black to ner cartridge 1 Remove the black toner cartridge from its packaging and gently rock the cartridge several times to distribute the toner.
To install the color toner cartridges 1 Turn the printer on (power button in). 2 Press the blue butto n beneath the clear door to turn the color toner carousel to the slot marked with a yellow sticker.
5 Remove the toner cartridg e that matches the color of the sticker in the carousel slot from its packaging and gently rock the cartridge several times to distribute the toner .
9 Close the clear doo r. Note If the clear door does not close, m ake sure that the blue lockin g lever is all the way to the left and that the seal has been completely removed from the toner cartridge. 10 Press the blue butto n to rotate the carousel to the slot marked with a magenta sticker and repeat steps 3 through 9.
Step 7: Loading the Input T rays The printer has the follo wing input trays: A Tray 1 (multipurpose tray) B Tray 2 C Tray 3 D Tray 4 (optional) These input trays contain me dia guides that are preset at the f actory to a default media size, either letter or A4.
Loading media into tray s 2 and 3 Note Before loadin g media into trays 2 and 3, verify that the spacers were removed from both trays wh en “Step 2: Unpacking the Printer” was perform ed. 1 Firmly grip the handle in the center of tray 2, squeeze the release lever, and pull the tray out until it stops.
5 Adjust the left m edia guide by pushing it in (A) and lifting it up and out (B). 6 Position the guide over the appropriate media size mar ked in the tray. 7 Press the guide into the rear slot (C), and then lower it down (D) into the front slot (E). Make sure the guide is not skewed.
9 Make sure that the media-size tab on the front of the tray is set to the correct med ia size. 10 Slide the tray back into the prin ter. 11 Attach the left output bin (A) to the left side of the printer if you did not install an optional multi-bin mailbox.
Loading me dia in the optio nal tray 4 Note Before loading media into tray 4, verify that the spacers were removed from the tray when “Step 2: Unpackin g the Printer” was performed . 1 Firmly grip the handle in the center of the input tray, squeez e the release lever, and pull the tray out until it stops.
5 Load m edia into the tray up to the media-fill mark. For example, up to 2,000 sheets of 20 lb (75 g/m 2 ) bond paper will fit in the tray. For informatio n on loading and orienting media, see the onlin e user’s guide or the quick refere nce guide.
Step 8: Conf iguring Input T rays Configure the mode for tray 1 (either First mo de or Cassette mode), the type of media (such as plain paper , letterhead , and transparencies) for each of the input trays, and the size of the media (such as letter , A4 , and legal) to use tray 1 in Cassette mo de.
Conf iguring Media T ype and Size Configuring the media type is beneficial for several reason s: • Configuring the media type prevents printin g on the wron g (and possibly more expensive) media. • If a user changes the type of med ia in an input tray, othe r users can still print on the corr ect media.
Step 9: Printing a Conf iguration Page Use the printer control panel to print a configuration page and verify that the printer was installed corre ctly .
To verify com municat ion with a para llel cable T o verify that the printer and computer are set up correctly to commu nicate with each other, prin t a direc tory list. 1 T urn the computer and printer on and wait for the printer to bring itself online (the prin ter is online when the Ready light on the printer control panel is lit).
Communicating with an optional HP JetDirect internal print server If the printer con tains an optional HP JetDire ct internal print server , and you cannot commu nicate with the printer over the network, verify the operation of the print server .
Step 10: Understanding the Software CD-ROMs are included with this printer . CD-ROM1 contains the prin ter software; CD-R OM 2 contains the online user’ s guide and the software needed to read the guide—Adobe TM Acrobat Reader (Acrord32.exe is on the root directory).
• For Micro soft Window s network installation instructions, see “Step 11: Window s Network Installation.” • For IBM LAN server network installation instruc tions, see “Step 12: IBM LAN Ser ver Network Installation .” • For Macin tosh network installation instructions, see “Step 13: Macintosh Netw ork Installation.
To access the online user’s guide fro m the hard disk • Microsoft W indows 95 users click Start , point to Program s , then HP LaserJet , and click the online user ’s guide icon. • Microsoft W indows 3.1 x users locate the HP La serJet grou p and double-click the online user’s guide icon.
Step 11: Windows Netw ork Installation In Microsoft W indows 95 and W indows NT ® 4.0, the installation software detects both the version of Windo ws that is in use and the language that is selected in the operating system. The installation software then installs printer driv ers and printing software that are appropriate for the system.
Conf iguring the Printer on the Ne twork Before you can use the printer, configure it on the network. HP recommen ds that you use a printer management utility such as the HP JetAdmin software, PCONSOL E, or NW AD MIN. Con figuring the printer on the network in volves steps such as setting up a print queue or port.
6 When you are prom pted to choose the method of installation, click Disk Copy . 7 Click Browse to assign a path to the dri ve and directory to which you want to copy .
Connecting Network Clients to the Printer After installing the software on a workstation , you must connect workstation to the printer . • Workstations in Window s 95 can be conn ected to the print server or directly to the printe r. • Workstations in Window s NT and W indows 3.
In W indows NT , there are three options for connec ting to a network printer: • Open Ne twork Neig hborho od and locate the printer on the network. Drag and dro p the printer’s icon from Network Neighbor hood to the Printers folde r. • Open Ne twork Neig hborho od and doub le-click the printer icon.
Step 12: IBM LAN Network Installation Installing the Printer Softwar e for IBM LA N Server 4. x For IBM LAN Server 4. x networks, install the software on workstations or on the server .
Conf iguring the Printer on the Network Before you can use the printer, you must configure it on the network by using a printer management utility such as the HP JetAdm in software. Configuring the printer on the network in volves steps such as setting up a port.
(This assume s that the CD-ROM drive is the D dri ve and that you are installing the En glish driver .) For <dri ver> , type: PC L or PS . 9 Click Refresh . Printer drivers app ear in the window . 10 Select the HP Color LaserJet 8500 dri ver . 11 Click Install .
Step 13: Macintosh Network Installation Installing the Macintosh Prin ter Software The Macintosh printer driver for this printer supports system v ersion 7.0 or later . For an EtherT alk or LocalT alk network , install the software on each workstation.
Connecting Network Clients to the Printer If you are not using a print spooler or a print queue, follow the directions below to connect the printer drivers to the printer automatically . If you are using a print spooler or if the automatic setup is unsuccessful, follow the directions below to configure the printer driver manually .
Conf iguring the Printer on the Network Configure the printer in one of two ways: • Print directly to the printer through E therTalk. • Print throu gh the network by printing to a print queue.
T roubleshooting Checklist If the printer does not appear to be functioning correctly , check the following items: Problem or Error Message Solution The printer control panel displ ay is blank. Make sure the printer’ s powe r s witch is on. The printer mig ht be in P ower Sa ve mode.
50 Troubleshooting Checklist EN.
.
English 8500, 8500 N, 8500 DN Printer *C3983-90901* *C3983-90901* C3983-90901 Getting Started Guide Copyright© 1997 He wlett-P ackard Co. Printed in USA 10/97 Manual Part No.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) 8500 N (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) 8500 N heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) 8500 N vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) 8500 N leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) 8500 N krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) 8500 N bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) 8500 N kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) 8500 N . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
