Gebruiksaanwijzing /service van het product L1730 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 45
User’s Guide L1530 and L1730 Flat Panel Monitors Document Part Number: 335576-B21 July 2003 This guide provides informa tion on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications.
© 2003 Hewlett-Packard Development Company, L.P. HP, Hewlett Packard, and the Hewle tt-Packard logo are trademarks of Hewlett-Packard Company in th e U.S. and other countries. Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of Adobe Systems Incorporated.
Contents 1 Product Features 2 Safety and Maintenance Guidelines Important Safety Information ........................................... 2–1 Maintenance Guidelines ................................................... 2–2 Cleaning the Monitor ......
Contents iv User’s Guide A Troubleshooting Solving Common Problems ............................................. A–1 Using the Worldwide Web .............................................. A–3 Preparing to call Technical Support .................
1 Product Features The Flat Panel Display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: L1530 Model 15-inch (38.1 cm) viewable area display. 1024 x 768 resolution, plus full-screen support for lower resolutions.
Product Features AssetControl. Speakers on the front panel. Compliant with the following regulated specifications: EPA ENERGY STAR Europeam Union CD Directives Swedish MPR II 1990 Swedish TCO Display Requirements L1730 Model 17-inch (43.18 cm) viewable area display.
Product Features User’s Guide 1-3 Compliant with the following regulated specifications: EPA ENERGY STAR Europeam Union CD Directives Swedish MPR II 1990 Swedish TCO Display Requirements.
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with your monitor. If another cord is used, use only a power source a nd connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the “Power Cord Set Requirements” section in Appendix C.
Safety and Maintenance Guidelines CAUTION: For the protection of your moni tor, as well as your computer, connect all power cords for your computer and its peripheral devi ces (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS).
Safety and Maintenance Guidelines Unplug your monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosal cleaners. Use a damp cloth for cleaning.
Safety and Maintenance Guidelines 2-4 User’s Guide Cleaning the Monitor To clean the monitor, follow these steps: 1. Turn off the monitor and the computer. 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean cloth dampened with isopropyl alcohol.
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the steps below. Connecting the Monitor The monitor has two video signal connectors on the rear panel: one analog (VGA) and one digital (DVI-D).
Setting Up the Monitor 3. Connect one end of the power cable to the back of the monitor, and the other end to an electrical wall outlet. WARNING: To reduce the risk of electical shock or damage to your equipment: Do not disable the cord grounding plug.
Setting Up the Monitor Connecting the DVI-D Signal Cable 4. Turn on the power source for both the computer and the monitor. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.
Setting Up the Monitor Adjusting the Monitor The monitor is attached to an ad justable pedestal that allows you to position the monitor screen for the best viewing in your particular environment. 1. Grasp the sides of the monitor screen and gently but firmly tilt the top of the screen foward or backward as needed for your comfort.
Setting Up the Monitor 2. While still holding the screen sides, move the screen up or down to the appropriate height within the range of the pedestal arm. Adjusting the Monitor Height 3. Grasp the sides of the monitor screen and swivel the screen left or right (45 degrees) as needed.
Setting Up the Monitor 1. Tilt the lower part of the monitor upwards. 2. Rotate the monitor clockwise until the monitor controls are on the left side. 3.
Setting Up the Monitor Removing the Monitor Base You can remove the monitor base to mount the monitor on a wall, a swing arm, or other mounting fixture.
Setting Up the Monitor 2. Remove the four screws as shown in the following illustration. Removing the Monitor Base CAUTION: Ensure that the bottom of the monitor base is positioned over a table or desktop before re moving the base from the monitor. 3.
Setting Up the Monitor Mounting the Monitor 1. Remove the monitor base. Refer to “Removing the Monitor Base” steps in the previous section. After the base is removed from the monitor, four threaded mounting holes are exposed on th e monitor back panel to be used for mounting purposes.
4 Operating the Monitor Installing the Information Files The CD-ROM included with this monitor contains two information files to be installed onto your computer; an .INF file and an .ICM file. The .INF file defines monitor resources and provides specifications used by most operating systems to install support software for certain hardware devices.
Operating the Monitor Front Panel Components L1530 and L1730 Monitor Components No. Control Function 1 Speakers Audio feature for m usic, alarms, etc. (multimedia models only) 2 Menu button Launches the On-Screen Display (OSD) menu and selects functions.
Operating the Monitor No. Control Function 5 + ( Plus button) When the OSD is active, press to navigate through the OSD and adjust OSD scale settings. When the OSD is inactive, press to select VGA or DVI input. 6 Power LED Fully powered = Green. Sleep mode = Amber.
Operating the Monitor 3. To navigate through the OSD Menu, press the + (Plus) button on the monitor’s front panel to scroll up, or the – (Minus) button to scroll in reverse. 4. To select an item from the OSD Menu, use the + or – buttons to scroll to and highlight your selection, then press the Menu button to select that function.
Operating the Monitor Basic OSD Menu Levels Menu Level 1 Menu Level 2 Advanced Menu Exit To access the Advanced OSD Menu, press the menu button again, or select Advanced Menu from the Basic OSD Menu.
Operating the Monitor Advanced OSD Menu Levels (Continued) Level 1 Level 2 Level 3 Factory Reset Custom Color Custom Color Adjustment Cancel Save and Return Language Deutsch English N Espanol Francais.
Operating the Monitor Advanced OSD Menu Levels (Continued) Level 1 Level 2 Level 3 Factory Reset No Exit Adjusting Screen Quality Allow the monitor to warm up fo r 20 minutes before performing the following procedures. The Auto-adjustment feature auto matically fine-tunes the image quality each time a new video mode is displayed.
Operating the Monitor Clock Phase—Increase/decrease the value to minimize video distortion or video jitter. When using the controls, you will obtain the best results by using the Auto-Adjustment pattern a pplication provided on the CD- ROM.
Operating the Monitor If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD. If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.
Operating the Monitor 6. Press the - (Minus) or + (Plus) buttons to adjust the hour. 7. Press the Menu button again to enter the time for minutes. 8. Press the - (Minus) or + (Plus) buttons to adjust the minutes. 9. Press the Menu button to lock in the time chosen.
A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord.
Troubleshooting Problem Possible Cause Solution Image appears blurred, indistinct, or too dark. Brightness and contrast are too low. Press the Minus button on the monitor front panel to auto- adjust the screen. If that doesn’t work, press the Menu button to open the Basic OSD Menu, and adjust the brightness and contrast scales as needed.
Troubleshooting Using the Worldwide Web Before contacting customer serv ices, refer to the support Web site at: http://www.hp.com/go/support Preparing to call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support.
B Technical Specifications L1530 Model 15-inch Flat Panel Monitor Display Type 15.0 in. TFT LCD 38.1 cm Viewable Image Size 15.0-inch di agonal 38.1 cm Maximum Weight (Unpacked) 9.9 lb. 4.5 kg (unpacked) Dimensions (includes pedestal) Height (adjustable) Depth Width 12.
Technical Specifications 15-inch Flat Panel Monitor (Continued) Relative Humidity 20 to 80% Altitude: Operating Non-operating 0 to 12,000 ft. 0 to 40,000 ft. 0 to 3657.6 m 0 to 12192 m Power Source 100 –- 240 VAC, 50 – 60 Hz Power Consumption <40 watts typical Input Terminals 15-pin D-type connector with cable inc luded.
Technical Specifications L1730 Model 17-inch Flat Panel Monitor Display Type 17.0 in. TFT LCD 43.18 cm Viewable Image Size 17.0-inch di agonal 43.18 cm Maximum Weight (Unpacked) 15.43 lb. 7 kg (unpacked) Dimensions (include pedestal) Height (adjustable) Depth Width 13.
Technical Specifications L1730 Model 17-inch Flat Panel Monitor (Continued) Power Consumption <50 watts typical Input Terminal 15-pin D-type connector with cable included.
Technical Specifications Energy Saver Feature When the monitor is in its normal operating mode, the Power light is green. The monitor also supports a reduced power state. The reduced power state is entered into if th e monitor detects the absence of either the horizontal sync signal a nd/or the vertical sync signal.
C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Agency Regulatory Notices Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules.
Agency Regulatory Notices Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Caus ing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Agency Regulatory Notices Korean Notice EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Hewlett Packard Company has determined that this product meets the Energy Star guidelines for energy efficiency.
Agency Regulatory Notices The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product.
D LCD Monitor Quality and Pixel Policy The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots.
LCD Monitor Quality and Pixel Policy To locate defective pixels, the monitor should be viewed under normal operating conditions, in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (16 in.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) L1730 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) L1730 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) L1730 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) L1730 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) L1730 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) L1730 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) L1730 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) L1730 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
