Gebruiksaanwijzing /service van het product LP1965 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 54
HP LP1965 19", LP2065 20", and LP2465 24" LCD Monitors User Guide.
© 2005–2006 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies.
ENWW About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
ENWW iv About This Guide.
ENWW Table of contents 1 Product Features HP LP1965, LP2065, and LP2465 Models ....... ............... .................. ................. .................. ... ............ . 1 2 Safety and Maintenance Guidelines Important Safety Information ......
ENWW Installing the HP Display LiteSaver Software .................. ...................................... ............. 30 sRGB Support ...................... .............. ............ .................. .............. ........... ................
ENWW 1 Product Features HP LP1965, LP2065, and LP2465 Models The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD).
ENWW ● AssetControl ● Compliant with the following regulated specifications: ● European Union CE Directives ● Swedish MPR II 1990 ● Swedish TCO Requirements Chapter 1 Product Features 2.
ENWW 2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements section in Appendix C.
ENWW Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself.
ENWW 3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE Be sure the master power switch, located on the rear panel of the monitor, is in the off position.
ENWW Rear Components Figure 3-2 Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. 3 AC Power Connector Connects the AC power cord to the monitor.
ENWW Selecting the Signal Connectors and Cables The monitor features two DVI-I connectors capable of supporting either analog or digital input. The video mode supported by the DVI-I connector is determined by the video cable used. ● For digital operation, use the DVI-D signal cable provided.
ENWW Connecting the Monitor 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor.
ENWW 3. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 3-6 Connecting the Power Cable 4. Place the cables through the cable management channel on the back of the monitor base.
ENWW Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-8 Tilting the Monitor NOTE The 24" model has a tilt range of -5 to +25 degrees. 2. Swivel the monitor to the left or right for the best viewing angle.
ENWW 3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. WARNING! A lock-down/release button on the front of the column prevents the display head of the 19" model from sliding up when the monitor is lifted.
ENWW 4. Pivot the monitor from landscape to portrait orientation viewing to adapt to your application. Figure 3-11 Pivoting the Monitor NOTE The 20" model (shown above) pivots counter-clockwise; the 19" and 24" models pivot clockwise.
ENWW Connecting USB Devices The monitor provides four USB connectors, two on the side panel and two on the rear panel, used to connect devices such as a digital camera, USB keyboard, or USB mouse. NOTE You must connect the USB hub cable from the monitor to the computer to enable the USB 2.
ENWW Using the Accessory Rails The monitor features accessory rails on the rear that may be used to mount optional devices, such as the HP speaker bar, to attach to the LCD. Refer to the documentation included with the optional device for detailed mounting instructions.
ENWW 3. Pull up on the monitor display head (2) to remove it from the base. Figure 3-14 Removing the Monitor from the Pedestal Base Mounting the Monitor The HP Quick Release can be removed from the pedestal base and installed to a mounting fixture. It allows you to quickly and securely attach the monitor panel to the mounting fixture.
ENWW 3. Mount the Quick Release to a swing arm or other mounting fixture using the four screws removed from the Quick Release in the previous step. Figure 3-16 Installing the Quick Release CAUTION The Quick Release can also be installed directly to a wall to mount the monitor panel.
ENWW Locating the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor display head.
ENWW 18 Chapter 3 Setting Up the Monitor.
ENWW 4 Operating the Monitor Software and Utilities The CD that comes with the monitor contains files you can install on the computer: ● an .INF (Information) file ● an .
ENWW Installing the .INF and .ICM Files After you determine that you need to update, you can install the .INF and .ICM files from the CD or download them. Installing from the CD To install the .INF and .ICM files on the computer from the CD: 1. Insert the CD in the computer CD-ROM drive.
ENWW Using the Auto-Adjustment Function You can optimize the screen performance for the VGA (analog) input by using the -/Auto button on the monitor and the auto-adjustment pattern software utility on the CD provided. Do not use this procedure if the monitor is using a DVI input.
ENWW Front Panel Controls Table 4-1 Monitor Front Panel Controls Control Function 1 Menu/Select Opens, selects or exits the OSD menu. 2 – (Minus)/Auto ● Navigates backward through the OSD menu and decreases adjustment levels. ● When the OSD menu is inactive, activates the auto adjustment feature to optimize the screen image.
ENWW Adjusting the Monitor Settings The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display Assistant utility. Using the On-Screen Display Menu Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences.
ENWW OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: ● Cancel —to return to the previous menu level.
ENWW Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description 9300 K Changes to slightly blueish white. 6500 K Changes to slightly reddish white.
Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description DDC/CI Support Allows the computer to control some OSD menu features such as brightness, contrast and color temperature.
ENWW Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description Disable Input Auto- Keeps the monitor's video input selection at it's current setting. Switching This menu selection is visible if the video input control is set to Enable Input Auto-switching.
ENWW Optimizing Digital Conversion This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase.
ENWW Identifying Monitor Conditions Special messages will appear on the monitor screen when identifying the following monitor conditions: ● Input Signal Out of Range—Change resolution setting to 1.
ENWW NOTE You must set the current local time before you reset the time for Sleep Time or On Time . Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is displayed as 13 hours 15 minutes. 5. Press the Menu button once to enter the adjustment mode for hours.
ENWW Table 4-3 HP Display LiteSaver Configuration Options (continued) Select This Option To Do This Display Off Sets the time when the monitor automatically turns off. This does not affect screen saver operation, which has priority over the HP Display LiteSaver.
ENWW Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP NOTE To complete the following procedure, you must be logged in as an administrator or a member of the administrator’s group. If the computer is connected to a network, network policy settings may prevent you from completing this procedure.
ENWW A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord.
ENWW Problem Possible Cause Solution HP Display LiteSaver doesn't turn off the monitor screen. The Activity Extension time has not elapsed. The default Activity Extension value is set to 10 minutes.
ENWW ● Hardware configuration ● Hardware and software you are using Preparing to Call Technical Support 35.
ENWW 36 Appendix A Troubleshooting.
ENWW B Technical Specifications NOTE All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance may vary either higher or lower.
ENWW Table B-1 LP1965 Model Specifications (continued) Power Source 100 — 240 VAC, 50/60 Hz Altitude: 0 to 12,000 feet 0 to 3657.6 m Operating 0 to 40,000 feet 0 to 12192 m Storage Power Consumption (maximum) <55 watts Input Terminal Two DVI-I connectors with cables included.
ENWW Table B-2 LP2065 Model Specifications (continued) Power Consumption (maximum) <75 watts Input Terminal Two DVI-I connectors with cables included.
ENWW Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognized these preset modes and they will appear properly sized and centered on the screen.
ENWW Table B-5 LP2065 Model Factory Preset Modes (continued) 11 1152 × 870 68.7 75.1 12 1152 × 900 61.8 66.0 13 1280 × 960 60.0 60.0 14 1280 × 1024 64.0 60.0 15 1280 × 1024 80.0 75.0 16 1280 × 1024 91.2 85.0 17 1600 × 1200 75.0 60.0 *18 1600 × 1200 93.
ENWW Table B-6 LP2465 Model Factory Preset Modes (continued) 23 1920 × 1200 74.0 60.0 *24 1920 × 1200 74.6 60.0 *For analog inputs only. Entering User Modes The video controller signal may occasionally call for a mode that is not preset if: ● You are not using a standard graphics adapter.
ENWW C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ENWW For questions regarding the product, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P.
ENWW *Notified body number (used only if applicable — refer to the product label). German Ergonomics Notice HP products which bear the “GS” approval mark, when forming part of a system comprising HP brand computers, keyboards and monitors that bear the “GS” approval mark, meet the applicable ergonomic requirements.
ENWW Japanese Power Cord Requirements For use in Japan, use only the power cord received with this product. CAUTION Do not use the power cord received with this product on any other products.
ENWW D LCD Monitor Quality and Pixel Policy The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots.
ENWW 48 Appendix D LCD Monitor Quality and Pixel Policy.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) LP1965 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) LP1965 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) LP1965 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) LP1965 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) LP1965 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) LP1965 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) LP1965 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) LP1965 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
