Gebruiksaanwijzing /service van het product mx705 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 44
User G uid e v7 5, mx7 05, MV7 5 40, s7 5 4 0, F S7 6 00, v7 6 5 0 17” CRT Monit ors Doc ument P art Number: 3 68 2 3 9-00 3 December 2004 This guide provides information on setting up the monitor , installing dri vers, using the on-screen display menu, troubleshooting, regulatory notices, and technical specif ications.
© Copyright 2004 He wlett-Packard Dev elopment Company , L.P . The information contained herein is subject to change without notice. Microsoft, MS-DOS, W indows, and W indows NT are trademarks of Microsoft Corporation in the U.S. and other countries.
User G uide iii Cont ent s 1 Product Features 2 Safety and Maintenance Guidelines Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Important Safety Information .
iv User Gu ide Cont ent s On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5 On-Screen Display Functions . . . . . . . . . . . . . . . . . . 4–6 Monitor Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Gui de 1–1 1 Product Features This color monitor is digitally controlled by the microprocessor-based computer . It pro vides an easy to use on-screen display menu technology that allo ws you to adjust the monitor to your specific vie wing needs.
1–2 User G uide Produ ct Featur es ■ Plug and play capability if supported by your system. ■ On-screen display (OSD) adjustments for ease of setup and screen optimization; allo ws you to adjust all elements of the screen image.
User Gui de 2–1 2 Safet y and Main tenan ce Gu ide l in es Safet y Gui delines P o wer R eq uirements A po wer cord is included with your monitor . If another cord is used, use only a po wer source and connection appropriate for this monitor .
2–2 User G uide Safety and Maintenance Gui delines Ä CAUTION: F or the pr otectio n of your mo nitor , as we ll as your computer , connect all po wer cor d s f or yo ur computer and its per ipheral.
Safety and Maintenance Gui delines User Gui de 2–3 ■ Install your monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug f irmly and pulling it from the outlet. Ne ver disconnect the monitor by pulling the cord.
2–4 User G uide ■ Do not place the monitor face do wn. Damage could result to the front panel controls or the monitor screen..
User Gui de 3–1 3 Set tin g Up t he Monitor At tac hing th e Monitor Ba se 1. Carefully position the monitor bottom side up. 2. Align the hooks on the base with the sockets on the bottom of the monitor and attach the base. 3. Push the base to ward the front of the monitor until it stops.
3–2 User G uide Setting Up the Monitor Remo ving t he Monitor Ba se In the e vent that you need to disassemble the base from the monitor , position the monitor bottom side up and follo w these instructions: 1. If you must remov e the base attachment, release the catch and slide the base to ward the back of the monitor .
Setting Up the Monitor User Gui de 3–3 4. Po wer on the computer and monitor . ✎ If the monitor fails to function properly , refer to Appendix A, “T roubleshooting. ” 5. If necessary , adjust the front panel monitor controls according to your personal preference.
3–4 User G uide Setting Up the Monitor Connec ting t he S peak ers (A v ail abl e wit h Se lec t Mod els) Se veral speaker models are a vailable with select monitors. Refer to the steps belo w for the speaker model included with your monitor . T all S peak ers wit h Bas e 1.
Setting Up the Monitor User Gui de 3–5 3. Attach the green connector from the control speaker to the green port on the back of the computer . 4. Attach the speaker po wer adapter cable to the connector on the back of the control speaker , and then plug the A C adapter into an electrical outlet.
3–6 User G uide Setting Up the Monitor Shor t Speak ers 1. Place the speaker set near the monitor so that the speaker with the controls is on the right side when you vie w the monitor from the front.
Setting Up the Monitor User Gui de 3–7 USB Sp eak er s 1. Place the speaker set near the monitor so that the speaker with the controls is on the right side when you vie w the monitor from the front. 2. Plug the USB cable 1 on the control speaker into a USB port on the computer .
3–8 User G uide Setting Up the Monitor P luggin g Hea dphones in to the Com puter T o use headphones, if your spea ker does not hav e a headphone port, plug them into the connector on the back of the computer labeled Out, Line Out or Speaker . Y ou may need to disconnect the speakers to connect the headphones.
User Gui de 4–1 4 Opera ting t he Monitor Soft war e an d Utilities Select monitor models will include a CD that contains two f iles you can install on your computer: ■ an .INF (Information) file ■ an .ICM (Image Color Matching) file Adobe Acrobat Reader is supp lied on this CD and can be installed from the menu.
4–2 User G uide Oper ating the Monitor work through separate BNC type connectors or through distribution b uf fers/boxes. Y ou may need to install the .INF file if these conditions are not met. The Imag e Color M atc hing File The .ICM file pro vides accurate color representation.
Operating the Monito r User Gui de 4–3 6. Ensure that the proper resolution and refresh rates appear in the W indo ws Display control panel. ✎ Y ou may need to install the digitally signed monitor .INF and .ICM files manually from the CD in the e vent of an installation error .
4–4 User G uide Oper ating the Monitor F ront P anel Co ntr ols Item Icon Name Function 1 menu menu Launc hes on-scr een display s and ex its the menus and On -Scr ee n Displ ay . 2 Le ft Adjustmen t Mo ves bac kwar d through men u options or dec reas es adjustme nt leve ls.
Operating the Monito r User Gui de 4–5 On - Screen Dis pl a y The On-Screen Display (OSD) adjusts the screen image based on your vie wing preferences. T o access the OSD, do the following: 1. If the monitor is not already on, press the power b utton to turn on the monitor .
4–6 User G uide Oper ating the Monitor 5. The adjustment windo w displays. Press the Right-Adjustment or Left-Adjustment buttons to increase (Right) or decrease (Left) the le vel of adjustment. 6. Press select to sav e the new adjustment. 7. T o exit the On-Screen Display , press the menu button once.
Operating the Monito r User Gui de 4–7 P incu shion R ight-Adjust ment make s the image sides con ve x and Left-Adju stment mak es the image concav e. T rapez oid R ight- A djustment adj usts the image so the top is lar ger and Left- Adj ustment adju sts the image so that the bottom is large r .
4–8 User G uide Oper ating the Monitor Monitor Mess ag es No Sig nal Me ssage If a No Signal message displays on the monitor screen, check to be sure the video cable is proper ly connected and ensure that the computer is po wered on.
Operating the Monito r User Gui de 4–9 Ou t of Fr equ ency Range Mes sag e If an Out of Frequency Range message displays on the monitor screen, the video resolution and/or refresh rate are set higher than the le vels the monitor supports. T o change the video resolution or refresh rate on the monitor: 1.
4–10 User Gui de Oper ating the Monitor Using t he Energy Sav er Mod e The monitor is designed to meet strict En vironmental Protection Agency (EP A) Energy Star requirements for reduced po wer consumption.
User Gui de A–1 A Tr o u b l e s h o o t i n g Solving Common Probl ems The follo wing table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem P ossible C ause Solution Sc reen is blank . P ow er cor d is disconnected .
A–2 User G uide T r oubl eshooting Monitor ma y have bee n move d o r i na dver te nt ly bumped . Pre ss the menu button to acce ss the On -Scr ee n Displ ay . Select Degau ss to acti vate . Hew lett -P ackar d suggests y ou not degauss mor e than once w ithin a 30-minute peri od of time .
T r oubleshoot ing User Gui de A–3 “No Signal” is display ed on sc reen . Monitor v ideo cable is disconnect ed. Connec t the 15-pin monitor v ideo cable to the computer . Be sure that the computer po wer is on. “Out of F r equency” is display ed on sc reen .
A–4 User G uide Using t he W orldwide W eb Before contacting customer services, refer to the support W eb site at: http://www .hp.com/support. Preparing to Call T echni cal Suppor t If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support.
User Gui de B–1 B T ec hnical S pec ifications ✎ All performance specifications are pro vided by the component manufacturers. Performance specif ications represent the highest specification of all HP’ s component manufacturers’ typical lev el specifications for performance and actual performance may v a ry either higher or lo wer .
B–2 U ser Guide T echnical Spec ificatio ns Display R esolu tions 640 x 480 640 x 480 640 x 480 72 0 x 4 0 0 800 x 600 800 x 600 10 2 4 x 7 68 10 2 4 x 7 68 115 2 x 86 4 12 80 x 10 2 4 Refre sh Rat .
T echni cal Spec ificati ons User Gui de B–3 Humidity 20% to 80% (non-condensing) Altitude Up to 10, 000 ft./3 048 me ters T CO R equire ments Select models meet T CO’03 MPRII Select models meet M.
B–4 U ser Guide T echnical Spec ificatio ns mx7 05 and FS7 6 00 1 7” fl at CRT moni tors Sc reen Si z e 17” (4 3 cm) visual diagonal Vi ew able scr een si z e 16” (41 cm) Dot P itch 0.
T echni cal Spec ificati ons User Gui de B–5 Dimensio n (W x H x D) Unpack ed w/attached base 16.2 x 16 .2 x 17 inche s (maximum) 410 x 410 x 4 30 mm (max imum) We i g h t 3 8 l b M a x .
B–6 U ser Guide T echnical Spec ificatio ns v7 6 50 1 7” flat CRT monitor Sc reen Si z e 17”(4 3 cm) visual diago nal Vi ew able scr een si z e 16” (4 0.
T echni cal Spec ificati ons User Gui de B–7 We i g h t 3 8 l b M a x . 17 k g Max. Operating T emperatur e 5 0 o F to 9 5 o F 10 o C to 3 5 o C Stora ge Tempera ture - 2 2 o F to 14 0 o F -30 o C to 60 o C Humidity 20% to 80% (non-condensing) Altitude Up to 10, 000 ft.
User Gui de C–1 C Agen cy R egul ator y N otices F ed eral Communi cations Comm issi on Not ice This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC Rules.
C–2 User Guid e Agenc y Regulatory Notices Modifications The FCC requires the user to be notified that an y changes or modifications made to this de vice that are not expressly approv ed by He wlett Packard Compan y may void the user's authority to operate the equipment.
Agency R egulator y Notices User Gui de C–3 Or , call (281) 514-3333 T o identify this product, refer to the Part, Series, or Model number found on the product. Can adian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C–4 User Guid e Agenc y Regulatory Notices Japane se Notic e Ko r e a n N o t i c e EP A Energy Star Com plian ce Monitors that are marked with the Ener gy Star Logo meet the requirements of the EP A Energ y Star program.
Agency R egulator y Notices User Gui de C–5 If you need to obtain a po wer cord for a different country , you should purchase a po wer cord that is approved for use in that country . The po wer cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) mx705 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) mx705 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) mx705 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) mx705 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) mx705 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) mx705 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) mx705 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) mx705 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
