Gebruiksaanwijzing /service van het product OmniBook 6000 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 96
® HP OmniBook 6000 Service Manual For other Service and User Manuals, go to www.ManualDepot.com.
ii HP Om niBook 6000 Notice In a continuing effort to im prove the quality of our products, technical and environm ental information in this document is subject to change without notice. This manual and any exam ples contained herein are provided “as is” and are subject to change without notice.
HP Om niBook 6000 iii Contents 1. Product Inform ation .................................................................................................. 1-1 Features ....................................................................................
iv HP Om niBook 6000 Figures Fi gure 1-1. Om niBook — F ront View ................................................................................................. 1-3 Fi gure 1-2. Om niBook — L ower View...........................................
HP Om niBook 6000 v Tables Table 1-1. Om niBook 6000 Series Models ......................................................................................... 1- 1 Table 1-2. Product Comparisons ..........................................................
vi HP Om niBook 6000 Introduction This manual prov ides reference information for serv icing the HP OmniBook 6000. It is for use by HP-authorized service personnel while installing, servicing, and repairing these products. The manual is designed as a self-paced guide that will train y ou to install, configure, and repair OmniBook 6000 com puters.
HP Om niBook 6000 Product Inf orm ation 1-1 1 Product Information The HP OmniBook 6000 provides outstanding perform ance and expandability, in a conveniently portable form. I ts high-perform ance components use the latest technologies to enable it to replace a desktop computer or serv e as a portable multim edia presentation tool.
1-2 Product Inf orm ation HP OmniBook 6000 Table 1-2. Product Comparisons OmniBook 6000 OmniBook 4150B OmniBook 900B Processor* Celeron (550 M Hz) or Pentium III (600/500, 650/500, or 700/600 MH z). Celeron (450 MH z), Pentium II (366 to 500 MH z), or Pentium III (650/500 MH z).
HP Om niBook 6000 Product Inf orm ation 1-3 Features The following three illustrations show the computer’s main external features. F or an exploded view of the computer, see page 4- 2. Figure 1-1 . OmniBook — Front View 1. Sleep button. Suspends and resumes operation.
1-4 Product Inf orm ation HP OmniBook 6000 Figure 1-2 . OmniBook — Lower View 19. M odem port (on certain models). 20. LAN port (on certain models). 21. PC Card and C ardBus (PCMC IA) slots (upper and lower). 22. Hard disk driv e. 23. M ain battery latch.
HP Om niBook 6000 Product Inf orm ation 1-5 Operation This section gives an overview of the com puter’s operation. Turning the Omni Book On and Off You can start and stop the computer using its blue sleep button.
1-6 Product Inf orm ation HP OmniBook 6000 Checking the Status of the OmniBook The computer’s main status lights, located on the front of the com puter, report power status, battery status, and drive activity Table 1-4.
HP Om niBook 6000 Product Inf orm ation 1-7 Using Fn Hot Key s The combination of the F n key plus another key creates a hot key —a shortcut key sequence—for various sy stem controls. To use a hot key, press and hold Fn, press the appropriate second key , then release both keys .
1-8 Product Inf orm ation HP OmniBook 6000 Resetting the OmniBook Occasionally, Windows or the com puter may stop responding, so that y ou cannot turn the computer off. If this happens, try the following in the order listed: 1. If possibl e, shut down Window s: press CTRL+AL T+DEL, then click Shut Down.
HP Om niBook 6000 Product Inf orm ation 1-9 Specifications The following tables list the specifications for the OmniBook and its accessories. These are subject to change: for the latest versions, see the HP Notebook Web site (www.hp.com/notebooks). Table 1-7.
1-10 Product Inform ation HP OmniBook 6000 Communications LA N/Modem Models (3Com): LAN - Ethernet 10Base-T (10 M bps) and 100Base-TX (100 Mbps) support. - Supports wake-on-LAN, remote w ake-up (W indows 98), fast IP, DM I, dRMON. - MBA (M anaged Boot Agent) support for PXE/BINL, BOOTP, NCP/IPX, DHCP.
HP Om niBook 6000 Product Inf orm ation 1-11 Security Features User and administrator passwords. System, hard drive, and docking passw ords. PC identification displayed at boot. DM I-accessible electronic serial number. Kensington Microsav er lock slot.
1-12 Product Inf orm ation HP OmniBook 6000 Table 1-8. O mniBook 6000 Series A ccessories Accessory D escription OmniBook 6000 Compat. 900B Compat. 4150B Memory F1456B 32-MB SDRAM (100 MHz) ex pansion.
HP Om niBook 6000 Product Inf orm ation 1-13 Internal Design The motherboard PCA is the central component of the Om niBook’s design. It play s a role in virtually all system functions. The CP U module and m ost other subsystems connect to the m otherboard.
1-14 Product Inf orm ation HP OmniBook 6000 Table 1-9. Functional Structure Bootup CPU module Motherboard Floppy disk module Hard disk drive Main processor (M MO). Primary sy stem circuitry. First source of disk-based startup code. Second source of disk-based startup code.
HP Om niBook 6000 Removal and Replac ement 2-1 2 Removal and Replacement This chapter tells you how to remov e and replace the OmniBook’s rem ovable com ponents and assemblies. The items m arked by • in the following table are user-replaceable. Table 2-1.
2-2 Rem oval and Replacem ent HP OmniBook 6000 Disassembly Flow chart The following diagram shows the general “path” y ou will use in disassembling the Om niBook to access any particular com ponent.
HP Om niBook 6000 Removal and Replac ement 2-3 Table 2-2. Required Equipment • Small Phillips screwdriv er, preferably magnetized. • Small flat-blade screwdriv er. • IC (PLCC) remov al tool (similar to OK Industries EX -5). Table 2-3. Recommended Screw T orques Screw Thread Size Torque (cm-kgf) Torque (in-lbf) M2 1.
2-4 Rem oval and Replacem ent HP OmniBook 6000 Remov ing the Battery (User-Replaceable) Required Equipment • None. Removal Procedure • Slide the battery’s release latch, then lift the battery out of its compartment.
HP Om niBook 6000 Removal and Replac ement 2-5 Remov ing a Plug-In Module (User-Replaceable) Required Equipment • None. Removal Procedure 1. Press the button on the module release latch, and slide the latch toward the front of the computer. Figure 2-3.
2-6 Rem oval and Replacem ent HP OmniBook 6000 Remov ing an SDRA M Module (User-Replaceable) The OmniBook 6000 has no SDRAM on its m otherboard, but has two slots for that hold two SDRAM modules. One slot contains a SDRAM m odule installed at the factory.
HP Om niBook 6000 Removal and Replac ement 2-7 Remov ing the Hard Disk Drive (User-Replaceable) Table 2-5. Hard Disk Drive Replacement Part Numbers Description Part Number Exchange Part Number Drive, hard disk (5 G B, 9.5 mm, Hitachi) 0950-3825 F2072-69103 Drive, hard disk (6 G B, 9.
2-8 Rem oval and Replacem ent HP OmniBook 6000 Figure 2-7. Removing the Hard Disk Case • Slide the cover down into place so the retainer tab engages the casing. • Carefully put the pin connector back onto the pins on the end of the new hard drive.
HP Om niBook 6000 Removal and Replac ement 2-9 Remov ing the Mini-PCI Card (User-Replaceable) Certain OmniBook m odels include a mini-PCI card. Table 2-6.
2-10 Rem oval and Replacem ent HP OmniBook 6000 Reassembly Notes • Gently press the m ini-PCI card into the connector at about a 30° angle, until it is fully inserted.
HP Om niBook 6000 Removal and Replac ement 2-11 Remov ing the Pow er Button Panel (User-Replaceable) Required Equipment • Small flat- b lade screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remov e the battery. Rem ove the secondary battery if one is installed.
2-12 Rem oval and Replacem ent HP OmniBook 6000 Replacing Small Parts (User-Replaceable) The user can replace the following small parts. Table 2-7. Replacing Small Part s (User-Replaceable) Part Replacement Procedure Cap, pointing stick Pull the cap off the pointing stick.
HP Om niBook 6000 Removal and Replac ement 2-13 Remov ing the Display A ssembly (HP Authorized Service Prov iders Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remov e the battery.
2-14 Rem oval and Replacem ent HP OmniBook 6000 Figure 2-10. Removing the Display Reassembly Notes • Before installing any screws, make sure the center hinge cov er fits over the tab in the bottom case.
HP Om niBook 6000 Removal and Replac ement 2-15 Remov ing the Keyboard (HP Authorized Service Prov iders Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remov e the battery. Rem ove the secondary battery if one is installed.
2-16 Rem oval and Replacem ent HP OmniBook 6000 Figure 2-12. Unplugging the Keyboard Cables Reassembly Notes • Lay the keyboard face down on the top case slightly forward of its normal position, then reconnect the keyboard and pointing stick flex cables.
HP Om niBook 6000 Removal and Replac ement 2-17 Remov ing the Heatsink (w ith Fan) (HP Authorized Service Prov iders Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remov e the battery.
2-18 Rem oval and Replacem ent HP OmniBook 6000 Remov ing the CPU Module (HP Authorized Service Prov iders Only) Table 2-8. CPU/M otherboard Component Compatibility Pentium III models Celeron models C.
HP Om niBook 6000 Removal and Replac ement 2-19 Figure 2-14. Removing the CPU Module Reassembly Notes • Carefully insert the CPU module into the motherboard, and turn the lock screw one-half turn clockwise to secure the CPU module. • The CPU module is key ed for installation, and can only be inserted one way .
2-20 Rem oval and Replacem ent HP OmniBook 6000 Remov ing the Top Case (HP Authorized Service Prov iders Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remov e the battery. Rem ove the secondary battery if one is installed.
HP Om niBook 6000 Removal and Replac ement 2-21 Figure 2-15. Removing the Top Case Reassembly Notes • If y ou need to reinstall the sound/IR panel, make sure the volum e control is oriented properly (pins facing inward). Insert the tabs on the end of the panel into the slots in the bottom case.
2-22 Rem oval and Replacem ent HP OmniBook 6000 Remov ing the Motherboard or Bottom Case (HP Authorized Service Prov iders Only) Required Equipment • Small Phillips screwdriver.
HP Om niBook 6000 Removal and Replac ement 2-23 4. From the top of the computer, remove the six screws that attach the m otherboard to the bottom case. 5. Bend the casing that surrounds the audio connectors outward slightly to release the connectors. 6.
2-24 Rem oval and Replacem ent HP OmniBook 6000 • If y ou need to install or replace the docking or PC MCIA doors, see the figures below. Figure 2-17.
HP Om niBook 6000 Removal and Replac ement 2-25 Replacing the Motherboard Installation Procedure Caution Replace the m otherboard only wi th one that is com patible with the Om niBook m odel and CPU module—s ee the table on page 2-18. 1. If present, rem ove the mini-PCI card and m ini-PCI panel.
2-26 Rem oval and Replacem ent HP OmniBook 6000 Storing Unit Information Electronically When replacing a motherboard PCA, you will need to download the OmniBook 6000 serv ice package from the Partnership Web site (see page vi). This package contains the followi ng: • Im age for creating a bootable Display Update floppy disk.
HP Om niBook 6000 Removal and Replac ement 2-27 Replacing the Bottom Case Installation Procedure 1. Install a new Microsoft Product ID label. 2. Transfer the old serial number label and install a new ov erlay, or create a new serial number label using the steps below.
2-28 Rem oval and Replacem ent HP OmniBook 6000 Repairing the BIOS IC (HP Authorized Service Prov iders Only) The BIOS IC of the Om niBook 6000 is not replaceable: • If the BI O S IC is defective, y ou must replace the power supply P CA.
HP Om niBook 6000 Removal and Replac ement 2-29 14 1 25 1 3 Figure 2-21. Boot-Block Jumper Remov ing Other Components (HP Authorized Service Prov iders Only) Required Equipment • Small Phillips screwdriver. • Small flat- b lade screwdriver. Removal Procedure 1.
2-30 Rem oval and Replacem ent HP OmniBook 6000 Component Removal Procedure Additional Steps Doors, PCMCIA Plug-in module (page 2-5). Hard disk drive (page 2-7). Power button panel (page 2-11). Keyboard (page 2-15). Heatsink (page 2-17). Display assembly (page 2-13).
HP Om niBook 6000 Removal and Replac ement 2-31 Component Removal Procedure Additional Steps PCA, power supply Plug-in module (page 2-5). Hard disk drive (page 2-7). Power button panel (page 2-11). Keyboard (page 2-15). Heatsink (page 2-17). Display assembly (page 2-13).
.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-1 3 Troubleshooting and Diagnostics This chapter includes troubleshooting and diagnostic information for testing the functionality of the OmniBook and identify ing faulty m odules: • Troubleshooting information Troubleshooting the problem (page 3-3).
3-2 T roubleshooting and Diagnostic s HP OmniBook 6000 Troubleshooting The suggestions in this section can help isolate and repair the cause of a problem. To ensure quality repair, HP recommends that y ou follow the basic troubleshooting steps shown in the illustration below.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-3 Troubleshooti ng the Pr obl em Record pertinent information about the unit: • Model and serial number. • Operating sy stem and v ersion. • BIOS v ersion. • Accessories and peripherals used.
3-4 T roubleshooting and Diagnostic s HP OmniBook 6000 Suggestions for Tr oubl eshooti ng Table 3-1. Scope of Diagnostic Tools Function DiagTools Powe r-On Self-Test Sy card PCCtest 450 DMI/TopTools (.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-5 If y ou cannot isolate the cause of a problem using the above diagnostic tools, use the suggestions in the following table to help find the problem.
3-6 T roubleshooting and Diagnostic s HP OmniBook 6000 Sy mptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Does not boot from a CD or DVD in the CD/DVD drive Make sure the CD or DVD is bootable. Use BIOS Setup to check the boot order.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-7 Sy mptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Battery does not charge. Check the power source. Check the battery contacts. If available, try another battery and ac adapter.
3-8 T roubleshooting and Diagnostic s HP OmniBook 6000 Sy mptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Hard disk Hard disk never spins. Check the power source. Remove and reinsert the hard drive. Check the connector.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-9 Sy mptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments PS/2 keyboard and mouse with Y - adapter do not work. Check devices separately . Y-adapter. PS/2 device. Motherboard.
3-10 T roubleshooting and Diagnostic s HP OmniBook 6000 Sy mptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Serial/Parallel/USB General problems. Check connections. Check settings in BIOS Setup. Check settings in Control Panel.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-11 Sy mptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Infrared General problems. Infrared is disabled and no drivers installed as shipped. (Drivers are included.) Check settings in BIOS Setup.
3-12 T roubleshooting and Diagnostic s HP OmniBook 6000 Sy mptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Computer pauses or runs sluggishly May be normal W indows behavior (background processing can affect response time).
HP Om niBook 6000 Troubles hooting and Diagnostics 3-13 Sy mptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Computer is still on but stops responding. Press CTRL+ALT+DEL and end any application that is not responding.
3-14 T roubleshooting and Diagnostic s HP OmniBook 6000 Diagnostic Tools This section describes the following diagnostic tools y ou can use for troubleshooting and repairing the OmniBook: • OmniBook DiagTools program (below). • Power-on self-test (page 3- 21).
HP Om niBook 6000 Troubles hooting and Diagnostics 3-15 Running DiagTools 1. Restart the OmniBook. 2. When the HP logo appears, press F10 to start the diagnostic test. 3. Go through the first several screens. 4. When the hardware detection finishes, check the list of detected hardware.
3-16 T roubleshooting and Diagnostic s HP OmniBook 6000 9. When you are finished, press ESC to exit the adv anced tests. 10. Press F4 to save sy stem and test information in the Support Ticket log file. 11. Exit. Press F3 to exit and reboot. 12. Optional: Check the log.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-17 Interpreting the Res ults • The following table lists test groups, error codes, and suggestions for follow- up actions. Consider these suggestions in combination with other troubleshooting inform ation.
3-18 T roubleshooting and Diagnostic s HP OmniBook 6000 Code Suggestions 0293h – 0296h Replace the hard di s k. 02AAh Check hard dis k connec t ors and m ot herboard connect or. Repl ac e the hard disk . Replace t he mot herboard. 02CCh Run BIOS Setup and c hec k the hard dis k type.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-19 Code Suggestions 9016h Res et the com puter. Reprogram the BI OS IC. Replace the power supply P CA . Replace the mot herboard. 9017h S ee c hapter 5 for c os met i c guidelines. If warranted, replace the di s play assem bly.
3-20 T roubleshooting and Diagnostic s HP OmniBook 6000 Code Suggestions 9603h Repeat the hard dis k test . If other errors occur, follow the ins t ruc tions f or those errors . 9604h B ac k up data if possibl e, then reinst all applicat i ons . Reform at the hard dis k.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-21 Pow er-On Self-Test Note If Quiet Boot is enabled in BIOS Setup (the default s etting), press ESC during boot to see POST mes sages. The PO ST (Power-On Self-Test) is a series of initialization routines and diagnostic tests that the system BIOS runs when the computer boots.
3-22 T roubleshooting and Diagnostic s HP OmniBook 6000 The following table lists POST messages and explanations for reported problems. I f the sy stem fails after you m ake changes in BIOS Setup, reset the computer, enter BI OS Setup, and install the defaults or correct the error.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-23 Message Description 02F5: DM A Test Failed S erverB IOS2 tes t error: Cannot write t o extended DMA (Direct Mem ory A c cess ) regi s ters. 02F6: Softw are NMI Failed ServerB I OS2 test error: Cannot generat e s of tware NMI (Non-Maskable Int errupt).
3-24 T roubleshooting and Diagnostic s HP OmniBook 6000 Sy card PCCtest 450 CardBus Car d (Opti onal ) The PCCtest 450 CardBus Card (version 1.05) available from Sy card Technology is the only recomm ended diagnostic tool that tests the functionality of the PCMC IA slots using a PCMCIA card.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-25 Desktop Management Interface (DM I) The Desktop Management Interface (DMI) is basically a set of rules for accessing information about a personal computer.
3-26 T roubleshooting and Diagnostic s HP OmniBook 6000 Contents of the DM I Package The DMI software and associated docum entation is supplied either preinstalled on the OmniBook’s hard disk drive or on the Recovery CD . The contents of the package are the sam e in both cases.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-27 BIOS Setup Ut ility The BIOS Setup utility provides access to basic configuration settings. I t is independent of the operating system . Running the BIOS Setup Utility 1. Close all applications, then click Start, Shut Down, Reboot.
3-28 T roubleshooting and Diagnostic s HP OmniBook 6000 Sy stem Devices Menu Default PS/2 Pointing Devices Disables the internal pointing devices w hen an external PS/2 mouse is connected. Auto External Fn Key Sets whether left CTRL+left ALT on an external key board is interpreted as the Fn key.
HP Om niBook 6000 Troubles hooting and Diagnostics 3-29 Power M enu Default W indows 2000 uses only the settings marked w ith *. W indows 98 uses only the settings marked w ith * or **.
.
HP Om niBook 6000 Replaceable Parts 4-1 4 Replaceable Parts This chapter contains an exploded view of the Om niBook and the following lists of parts: • OmniBook replaceable parts (page 4- 3). • Accessory replacem ent parts (page 4-5). • Part number reference (page 4-6).
4-2 Replac eable Parts HP Om niBook 6000 Figure 4-1. Exploded View.
HP Om niBook 6000 Replaceable Parts 4-3 Table 4-1. O mniBook Replaceable Parts Description Part Number Exchange User- Part Number Repl. 1 Battery, main (14.
4-4 Replac eable Parts HP Om niBook 6000 Description Part Number Exchange User- Part Number Repl. Kit, OB6000 screw s F2072-60923 Yes 12 Screw , M 2x4mm (see above kit) 13 Screw , M 2x15mm (see above kit) 14 Screw , M 2.5x2mm (w ide-head) (see above kit) 15 Screw , M 2.
HP Om niBook 6000 Replaceable Parts 4-5 Table 4-2. Accessory Replaceable Parts Description Part Number Exchange User Part Number Repl. Adapter, ac (60 watt) 0950-3634 Yes Adapter, auto/air (75 watt) F1455-80003 Yes Adapter, docking module bay F2010-60901 Yes Adapter, PS/2 “Y” F1469-80001 Yes Battery, main (14.
4-6 Replac eable Parts HP Om niBook 6000 Table 4-3. Part Number Reference Part Exchange Description User Number Part Number Repl. 0950-3634 Adapter, ac (60 watt) Yes 0950-3710 F1711-69106 Drive, hard disk (6 G B, 9.5 mm, IBM) Yes 0950-3712 F1660-69106 Drive, hard disk (18 G B, 12.
HP Om niBook 6000 Replaceable Parts 4-7 Part Exchange Description User Number Part Number Repl. F2072-60905 Case, top F2072-60906 Battery, main (14.8 V) Yes F2072-60907 Panel, power button Yes F2072-6.
4-8 Replac eable Parts HP Om niBook 6000 Part Exchange Description User Number Part Number Repl. F2072-60952 Recovery C D, Greek W 98 F2072-60953 Recovery C D, Turkish W 98 F2072-60954 Recovery C D, E.
HP Om niBook 6000 Referenc e Inform ation 5-1 5 Reference Information This chapter includes the following reference information: • Password removal policy . • Display quality statement. Passw ord Remova l Policy If the user forgets the sy stem password, the user calls Technical Support to determine the proper remov al procedure.
5-2 Ref erence Infor mation HP Om niBook 6000 Hew l ett-Packard Display Quality Statement TFT display manufacturing is a highly precise but imperfect technology , and manufacturers cannot produce large displays that are cosm etically perfect. Most, if not all, TF T displays exhibit som e level of cosmetic im perfection.
HP Om niBook 6000 Referenc e Inform ation 5-3 Table 5-1. OmniBook 6000 LCD G uidelines ( 14.1/15.0” T FT , XGA ) Ty pe of Imperfection Imperfections Not Allowed Electrical Imperfections: Bright dots (a) Dark dots (a) • 7 or more single bright dots.
5-4 Ref erence Infor mation HP Om niBook 6000 Serv ice Notes Service notes containing im portant repair information for the HP OmniBook 6000 will be issued periodically as needed. These notes are av ailable online at the Partnership Web site—see page vi.
.
1. Product Inform ation 2. Rem oval and Replacement 3. Troubleshooting and Diagnostics 4. Replaceable Parts 5. Reference Inform ation Part Number F2072-90045 Printed in U.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) OmniBook 6000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) OmniBook 6000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) OmniBook 6000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) OmniBook 6000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) OmniBook 6000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) OmniBook 6000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) OmniBook 6000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) OmniBook 6000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
