Gebruiksaanwijzing /service van het product RPC-3A van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 88
OWNER’S MANUAL _________________ BAYTECH REMOTE POWER CONTROL UNIT FOR MODELS RPC-2 RPC-2A RPC-2 MD01 RPC-2 RDR RPC-3 RPC-3A RPC-5 BayTech Manual Publication #U140E125-03 July 1998.
ii Copyright 1998 by Bay Technical Associates, Inc. BayTech, Telplex, LaserShare, Print Master and TRAN-X are registered tradem arks of Bay Technical Associates, Inc. IBM, IBM PC, IBM PC/AT, IBM PC/XT are products a nd registered trademarks of International Business Machines Co rporation.
RPC SERIES OWNER’S MANUAL ABOUT THIS OWNER’S M ANUAL __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ iii ABOUT THIS OWNER’S MANUAL This document provides information required for installing and opera ting your Bay Tech equipment.
RPC SERIES OWNER’S MANUAL ABOUT THIS OWNER’S M ANUAL __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ iv The information in this document is subject to change without notice.
v .
vi CHANGE OUTLET NAME .............................................................................. 34 RPC-3, RPC- 3A, AND RPC-5 .....................................................................
vii #$ ! .
RPC SERIES OWNER’S MANUAL INTRODUCTION TO THE RPC SERIES __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 1 INTRODUCTION TO THE REMOTE POWER CONTROL SWITCH (RPC) The Ba yTech RPC-Series is a full-featured AC power managem ent solution that provides an eas y way to control power of remote equipment.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-2 AND RPC-2A) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 2 RPC SERIES QUICK START “Quick Start” is designed for users familiar with BayTech products who need a fast setup and familiarization.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-2 AND RPC-2A) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 3 If the status menu fails to appear, ensure the correct c ables and adapters are being used and that they are connected p roperl y.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-2 AND RPC-2A) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 4 Change Password Default password is <cr> . The maximum field length is 8 alph anumeric characters.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-2 MD01 AND RPC-2 RDR) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 5 RPC-2 MD01 AND RPC-2 R.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-2 MD01 AND RPC-2 RDR) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 6 Using the RJ04X007 (RJ-11) modular cable, connect either port labeled “LINE ” on the RPC unit to the telc o wall jack.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-2 MD01 AND RPC-2 RDR) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 7 Controlling Receptacle.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-3 , RPC-3A, AND RPC-5) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 8 RPC-3, RPC-3A AND RPC-5 QUICK START NOTE: The RPC-3, 3A and 5 a re configured in a similar manner.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-3 , RPC-3A, AND RPC-5) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 9 RPC-3 Tel net Host Revisio n F 3.03, (C) 1998 Bay Te chnic al Asso ciates Unit ID: RPC3 RPC-3 Menu: 1) .
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-3 , RPC-3A, AND RPC-5) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 10 Change Password Default password is <cr>; disabled. Password is case se nsitive.
RPC SERIES OWNER’S MANUAL RPC SERIES QUICK START (RPC-3 , RPC-3A, AND RPC-5) __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 11 Access Default p assword i s <cr>; disabl ed. NOTE : If user nam e and password are disabled (d efault), outlet users will have access to all admin functions.
RPC SERIES OWNER’S MANUAL INSTALLATION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 12 INSTALLATION UNPACKI NG Compare the unit and serial number of the equipment you received to the packing slip located on the outside of the box.
RPC SERIES OWNER’S MANUAL INSTALLATION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 13 POWER CAUTION: This unit is intended for indoor use onl y. Do not install near water or e xpose this unit to moisture.
RPC SERIES OWNER’S MANUAL INSTALLATION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 14 POWER ON/OFF STATE Each recept acle is indivi dually controlled b y an internal relay. Upon initialization of powe r, the status of ea ch receptac le will return to the state it was in prior to losing power.
RPC SERIES OWNER’S MANUAL CABLING __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 15 CABLING RJ-45 CABLES AND ADAPTERS IMPORTANT: All RPC models have an RJ-45 port for connecting to a l ocal E IA-232 device such as a computer terminal or external modem.
RPC SERIES OWNER’S MANUAL CABLING __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 16 The RPC RJ- 45 con trol por t uses the follow ing sig nals : EIA- 232 R J- 45 PIN/SIGN A L D EFI N I TI O N Pin EIA- 232 Signal D irection Descript ion 1D T R O u t p u t +10V w he n activ ate d by DCD .
RPC SERIES OWNER’S MANUAL CABLING __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 17 Modem Communic ati o ns: A modem ca n be connected to the EI A-232 serial port by using a 25MRJ45MD-8 adapter (F ig ure 6).
RPC SERIES OWNER’S MANUAL CABLING __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 18 IMPORTANT : Crossed RJ-45 cables are required when mod ular con.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 19 DETAILED OPERATION AND CONFIGURATION The following section, “Operation and Confi guration,” provides a detailed approach to accessing, oper ating, and configuring the RPC.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 20 Using the 9FRJ45PC-1 adapter (or .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 21 Accessing Main Menu Power on the RPC unit. The following status menu appears: RPC-2 Seri es (c) 1997 by BayTec h F2.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 22 RPC-2 Seri es (c) 1997 by BayTec h F2.07 Circuit Bre ak er : On 1) . . . OUT LET 1 : Of f 2) .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 23 set, the RPC requires password entr y before allowing the user to operate the RPC unit .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 24 typing “CONF IG” to access the configuration menu.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 25 Enter the number of the outlet you want to change. If you want to change the name of Outlet 4, type the number 4 at the “Enter Request” prompt, followed b y <cr>.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 26 From the configuration menu, select #3, “Enable/Disable Confirmation.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 27 RPC-2 MD01 AND RP C-2 RDR LOCAL A.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 28 parameters are 9600 bps, 8 data bits, 1 stop bit, and no parity.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 29 OPERATION The RPC’s main menu allows y ou to monitor and control equipment attached to each of the RP C-2 RDR and RPC -2 MD01’s six receptacles.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 30 If the status menu fails to appear, ensure the correct cabl es and adapters a re being used and that they are connected prop erl y.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 31 The REBOOT n command will reboot or reset equipment attached to correspondin g receptacle (s).
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 32 RPC-2 Series (C) 19 97 by BayTe ch F2.07 Circuit Bre ak er : On 1) . . . OUT LET 1 : Of f 2) .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 33 Change Password From the status menu’s RPC > prompt, type CONFIG . The following menu appears: RPC > CONFIG 1) .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 34 typing CONFIG” from the RPC > prompt to access the configuration menu.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 35 Select #2, “Change Outlet Name,” and press <Enter.> The RPC responds: 1) .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 36 RPC-3 AND RP C-3A and R PC-5 NOTE : The RPC-3, RPC-3A and RPC-5 are configured in a similar manner.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 37 LOCAL ACCESS Load serial port communications software. USING EIA-232 Configure host te rminal’s serial SERIAL CONNECTION communications pa rameters to match the RPC.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 38 established via a Telnet session from your workstation. Using a straight 10Base-T cable, conn ect the Ethernet portion the RPC Series to the network hub.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 39 In the RPC Series’s main menu, .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 40 If the main me nu fails to appear , ensure the correct cabl es and adapters a re being used and they are properl y connected.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 41 NOTE : The outlet user sees only those outlets as assigned to him by the admin user.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 42 receptacle (s).
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 43 Add Use r The “Add user” option is pre sented any time less than 8 (4 for the RPC-5) optional users are defined.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 44 Change Password IMPORTANT: If enabled, the password function provides independent user access to assi gned outlets by entering a user name and/or password.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 45 When you enter the current passwo.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 46 Change Outlet List The outlet list determine s which outlets a particular user can a ccess.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 47 CONFIGURATION Configuration can be performed b y the admin user only via the serial port or the network port.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 48 address is 0.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 49 Enter the Gateway address (Example: 200.4.5.50), followed b y <cr>. The RPC resumes the co nfiguration menu Default Gateway address is 0.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 50 Login setup Toggl e option by ent eri ng nu mber, CR to ex i t. Netw ork acces s: 1).
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 51 Outlet Status Display From the Outlet Operation Configuration Menu, select #1, “Outlet Status Display.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 52 From the Outlet Configuration Menu, select #3, “Outlet Power-up Dela y.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 53 Enter nu mber of outl et to n ame, CR to ex it. 1) . . . OUTLET 1 2) . . . OUTLET 2 3) .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 54 Display Outlet User From the Outle t Operation Configuration Menu, select #5, “Display Outlet User,” followed by <cr>.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 55 RPC Unit Status Menu 1) . . . System 2) . . . Ne twork In terface 3) . . . Lo gged Use rs 4) .
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 56 Netw ork Status: Me di um stat us: g ood Medium faults: 0 Xmit bufr errs: 0 Available send buffers: 29 Receive queue st atus: open <Strik e any k ey to continu e.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 57 Outlet St atus The following tabl.
RPC SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURAT ION __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 58 RPC3 > “n” refers to sele ction n u mber, as dis played i n Outlet Status.
RPC SERIES OWNER’S MANUAL TECHNICAL SUPPORT ____________________________________________________________ 59 TECHNICAL SUPPORT BayTech has a staff o f applications engineers on dut y to assist you from 7 a.m. to 6 p.m. (CST or CDT), Monday through Friday.
RPC SERIES OWNER’S MANUAL TECHNICAL SUPPORT ____________________________________________________________ 60 EQUIPMENT SETUP RPC Series Unit Model ____________ RPC Series Unit Serial Number _________.
RPC SERIES OWNER’S MANUAL REPACKAGING, SHIPPING, AND RETURNING TO THE FACT ORY __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 61 REPACKAGING, SHIPPING AND RETURNING TO THE FACTORY If your Bay Tech unit needs service, up grade, or rep air, return it to BayTech.
RPC SERIES OWNER’S MANUAL FCC RADIO FREQUENCY INTERFACE STATEM ENT __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 62 FCC RADIO FREQUENCY INTERFACE .
RPC SERIES OWNER’S MANUAL FCC RADIO FREQUENCY INTERFACE STATEM ENT __ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ 63 d. If the Telephone Compan y requests information on connected equipment to their lines, inform them of the following: 1.
RPC SERIES OWNER’S MANUAL APPENDIX A _____ ______ ________ ______ ________ ____ ______ ________ ____ ______ ________ ____ _______ 64 APPENDIX A SPECIFICATIONS RPC- 2 RPC- 2A RPC-2 MDO 1 RPC-2 RDR RP.
RPC SERIES OWNER’S MANUAL APPENDIX A _____ ______ ________ ______ ________ ____ ______ ________ ____ ______ ________ ____ _______ 65 APPENDIX A SPECIFICATIONS (Cont.
RPC-SERIES OWNER’S MANUAL APPENDIX B 66 APPENDIX B MODEM COMMAND SUMMARY U.S. ROBOTIC MODEMS COMMAND INTERPRETATION AT&B1 Fixed Serial Port Rate (default) AT&C1 Normal CD Operations (default) AT&D2 Normal DTR Operations (default) ATS0=1 Auto answer telephone line in 4 or fewer rings ATE0 Modem does not display keyboar d comm ands.
RPC-SERIES OWNER’S MANUAL APPENDIX B 67 APPENDIX B MODEM COMMAND SUMMARY (Cont.) ROCKWELL CHIP SET MODEMS COMMAND INTERPRETATION ATS23=59 Fixed Serial Port Rate (default) AT&C1 Normal CD Operati.
RPC-SERIES OWNER’S MANUAL APPENDIX C 68 APPENDIX C DIAGNOSTIC LED I NDICATIONS To detect hardware, cabling, or configuration problems upon initialization of power, the RPC Series go through a dia gnostic sequence. To help determine the cause of the problem, the RPC Series have a CX LED located on the front, right side of the unit.
RPC-SERIES OWNER’S MANUAL APPENDIX D 69 APPENDIX D RPC TROUBLESHOOTING GUIDE PROBLEM SYMP TOM CAUSE SOLUTION No Menu Blank Screen Cables Adapters Parameters En sure correct cables and adapters are being used and are con nected properly. Verify serial paramet ers are correctly conf igured.
RPC-SERIES OWNER’S MANUAL APPENDIX D 70 APPENDIX D - RPC TROUBLESHOOTING GUIDE (Cont’) PROBLEM SYMPTOM CAUSE SOLUTION Cannot access Outlet Control o r Config uration “X” i n the me nu l ine for the desired operation Multiple Users Net work user overrides serial u ser.
RPC-SERIES OWNER’S MANUAL APPENDIX D 71 APPENDIX D - RPC TROUBLESHOOTING GUIDE (Cont’) PROBLEM SYMP TOM CAUSE SOLUTION PIN G not echo ing request Gets request timeout Check net work connection For.
RPC-SERIES OWNER’S MANUAL APPENDIX E 72 APPENDIX E- DRAWINGS RPC-2.
RPC-SERIES OWNER’S MANUAL APPENDIX E 73 APPENDIX E- DRAWINGS RPC-2A.
RPC-SERIES OWNER’S MANUAL APPENDIX E 74 APPENDIX E- DRAWINGS RPC-2 MD01.
RPC-SERIES OWNER’S MANUAL APPENDIX E 75 APPENDIX E- DRAWINGS RPC-2 RDR.
RPC-SERIES OWNER’S MANUAL APPENDIX E 76 APPENDIX E- DRAWINGS RPC-3.
RPC-SERIES OWNER’S MANUAL APPENDIX E 77 APPENDIX E- DRAWINGS RPC-3A.
RPC-SERIES OWNER’S MANUAL APPENDIX E 78 APPENDIX E- DRAWINGS RPC3/3A/5 ETHERNET B OARD.
RPC-SERIES OWNER’S MANUAL APPENDIX E 79 APPENDIX E- DRAWINGS RPC-5.
RPC-SERIES OWNER’S MAP INDEX 80 INDEX A Adapte r, 2, 5, 6, 8 , 12, 16 , 19, 20 , 27, 28 , 37 Ada pt er s, 59 Applica tions Engi neer, iii Asynchronou s, 1 7 ATDT Commands , 31 C Cable, 18 Cables , 5.
RPC-SERIES OWNER’S MAP INDEX 81 R Reboot , 14, 20 , 22, 29 , 31, 41 Remote A cces s, 5, 28, 3 7 Remote O perations, 38 Repackagi ng, 6 1 Reset, 22, 31, 41, 55, 57, 70 Returning, 61 Ring Detect Reset.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) RPC-3A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) RPC-3A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) RPC-3A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) RPC-3A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) RPC-3A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) RPC-3A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) RPC-3A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) RPC-3A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
