Gebruiksaanwijzing /service van het product SL160Z van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 33
Open View: Rear View: 1. 18 DDRs DIMM slots 1. Serial Port 2. Up to two Intel® Quad-Core 5500 sequence processors 2. Video Port 3. Two 3.5" non-hot plug hard drives using a quick release drive carrier 3. (2) USB Ports 4. (2) 1Gbit NIC 5. Optional Dedicated Management port 6.
Standard Slot 1: low-profile x16 PCI-Express 2.0 Optional Slot 2: low-profile internal only x4 PCI-Express 2.0 Management : HP ProLiant Onboard Administrator Powered by Lights-Out 100 with optional LO.
Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html . QuickSpecs HP ProLiant SL160z Generation 6 (G6) Overview DA - 13385 Worldwide QuickSpecs — Version 1 — 6.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Quad-Core Processors Intel® Xeon® Processor X5570 (2.
Memory Type DDR3 Registered (RDIMM) or Unbuffered (UDIMM) Standard (per server tray) 6 GB (3 x 2 GB) UDIMMs Maximum (RDIMM) (per server tray) 144 GB (18 x 8 GB) for Registered Memory configurations Ma.
Storage Optical Drives DVD-ROM / DVD RW drives via USB only Diskette Drives Via USB only Drive Bays None ship standard Up to 2 Non-hot plug SATA 3.5" drives Maximum Internal Storage Non-Hot Plug SATA 2.
Embedded Systems Management HP ProLiant Onboard Administrator Powered by LO100 with LO100i Advanced Licenses HP ProLiant Onboard Administrator Powered by Lights-Out 100 is standard with this server and has LO100i Advanced Licenses for Virtual KVM and Virtual Media available as options.
Industry Standard Compliance ACPI V2.0 Compliant PCI 2.2 Compliant PXE Support WOL Support Microsoft® Logo certifications IPMI 2.0 DCMI 1.0 SMASH CLP compliant Security Power-on password Setup passwo.
Power Supply HP has a new design for ProLiant power- the new Common Slot Power Supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs.
Rack Airflow Requirements Rack 10000 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
Service and Support HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs. HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.
NOTE: High Performance Computing (HPC) interconnect technologies are available for the SL160z G6 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800), FIO NOTE: If 2 processors are desired, select one 539198-L21 and one 539198- B21. 539198-L21 Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2), FIO NOTE: If 2 processors are desired, select one 539202-L21 and one 539202- B21.
Hard Drive NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the Controller. Refer to the Controller technical specifications for details. NOTE: The hard drives use a quick release carrier. SATA Entry (ETY) Drives - with quick-release (QR) carrier HP 160GB 3G SATA 7.
NOTE: Some options may not be factory integrated. Please contact your local sales representative for additional information. HP ProLiant SL160z G6 Unique Options HP Dedicated MGT Port Kit 516006-B21 H.
Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 HP 4GB 4Rx8 PC3-8500R-7 LP Kit 500660-B21 HP 8GB 2Rx4 PC3-10600R-9 Kit 500662-B21 HP 8GB 2Rx4 PC3-8500R-7 Kit 516423-B21 Unbuffered with ECC DIMMs (UDIMMs) NOTE: Maximum 12 DIMMs supported per node.
Redundant Options CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
Remote Management HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates 530521-B21 NOTE: For additional information, please see the Lights-Out 100i QuickSpecs at: www.
Rail Options HP ProLiant z6000 G6 2U rail kit NOTE: 2U rail kit used for HP or 3rd part racks - allows addition of one z6000 chassis at a time. 570226-B21 HP ProLiant z6000 G6 10U Bulk rail kit NOTE: 10U rail kit used for HP racks ONLY - allows addition of five z6000 chassis at a time.
HP Rack 10000 G2 Series (Carbon/Graphite Metallic) 10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet AF034A 10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet AF038A 10647 G2 (47U) Rack Cabinet 120.
Service and Support Offerings (HP Care Pack Services) HP 1y 4h 13x5 SL6000 HW Support UR258E HP 1y 4h 24x7 SL6000 HW Support UR259E HP 1y 6h 24x7 CTR SL6000 HW Supp UR260E HP 3y Nbd SL6000 HW Support .
HP ProLiant SL160z G6 (all models) NOTE: Memory configurations listed do not apply to "Factory Integrated Models". NOTE: Charts do not represent all possible memory configurations. DDR3 memory population guidelines For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, you run at 1066MHz If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz 95 Watt CPU's are required for 1333MHz DIMM speeds.
CPU1 CPU2 slot # population order slot # population order Chnl 1 1 G; empty 1 G; empty Chnl 1 2 D; 2GB DIMM 2 D; empty 3 A; 2GB DIMM 3 A; empty Chnl 2 4 H; empty 4 H; empty Chnl 2 5 E; 2GB DIMM 5 E; e.
Standard memory replaced with optional memory (2 CPU model) RDIMM maximum configuration 144GB, consisting of eighteen (18) 8GB PC3-8500 RDIMMs CPU1 CPU2 slot # population order slot # population order.
Following are memory options available from HP: Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 HP 4GB 4Rx8 PC3-8500R-7 LP Kit 500660-B.
1-2 Non-hot plug SATA hard drive bays - Using quick release carrier Drive Support Hard Drives NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details.
HP 460W Power Supply Part Number - AC 460W PSU 503296-B21 Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 120 208 200 220 230 240 Maximum Rated Output Wattage 460 460 460 460 460 460 460 Nominal Input Current (A rms) 5.
HP 1200W Power Supply Part Number - AC 500172-B21 Operational Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 120 208 200 220 230 240 Maximum Rated Output Wattage 800 900 1200 1200 1200 1200 1200 Nominal Input Current (A rms) 9.
System Unit Dimensions (H x W x D) (with bezel) 3.46 x 17.64 x 28.1 in (8.79 x 44.80 x 71.37 cm) Weight (approximate) Maximum (all hard drives, power supplies, and processors installed) 53.7 lb (24.35 kg) Input Requirements (per power supply) Rated Line Voltage 90 to 132 VAC 180 to 264 VAC Rated Input Current 5.
declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
© Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) SL160Z (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) SL160Z heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) SL160Z vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) SL160Z leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) SL160Z krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) SL160Z bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) SL160Z kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) SL160Z . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
