Gebruiksaanwijzing /service van het product v75 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 46
User G uid e v7 5, m7 05, mx7 0 5, CV7 5 4 0, MV7 5 4 0, s7 5 4 0, F S7 6 00, v7 6 50 17” CR T Monito rs Doc ument P art Number: 3 6 8 2 39 -004 Januar y 2006 This guide provides information on setting up the monitor , installing dri vers, using the on-screen display menu, troubleshooting, regulatory notices, and technical specif ications.
© Copyright 2004, 2006 He wlett-Packard De velopment Company , L.P . The information contained herein is subject to change without notice. Microsoft, MS-DOS, W indows, and W indows NT are trademarks of Microsoft Corporation in the U.S. and other countries.
Cont en ts 1 Product Features 2 Safety and Maintenance Guidelines Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Important Safety Information .
Cont ent s On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5 On-Screen Display Functions . . . . . . . . . . . . . . . . . . 4–6 Monitor Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8 No Signal Message .
1 Product Features This color monitor is digitally controlled by the microprocessor-based computer . It provides an easy to use on-screen display menu technology that allo ws you to adjust the monitor to your specific vie wing needs. The 17-inch/43-centimeter CR T monitor features include: ■ 16” (41 cm) vie wable area display .
Produ ct F eatures ■ Plug and play capability if supported by your system. ■ On-screen display (OSD) adjustments for ease of setup and screen optimization; allo ws you to adjust all elements of the screen image. ■ Energy Sa ver feature to meet requirements for reduced po wer consumption.
2 Safet y and Main tenan ce Gu id e li ne s Safet y Gui delines P o wer Requirements A po wer cord is included with your monitor . If another cord is used, use only a po wer source and connection appropriate for this monitor .
Safety and Maintenance Gui delines Ä CAUTION: F or the protec tio n of y our monito r , as well as y our computer , connect all po wer cor ds for y our compu ter and its per ipheral de vice s (suc h as a monitor , printer , scanner ) to some f orm of sur ge pr otecti on dev ice suc h as a po wer str ip or Uninter ruptible P o w er Suppl y (UP S).
Safety and Maintenance Gui delines ■ Install your monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug f irmly and pulling it from the outlet. Ne ver disconnect the monitor b y pulling the cord. ■ T urn your monitor off when not in use.
■ Do not place the monitor face do wn. Damage could result to the front panel controls or the monitor screen. 2–4 User Gu ide.
3 Set tin g Up t he Monitor At tac hing th e Monitor Ba se 1. Carefully position the monitor bottom side up. 2. Align the hooks on the base with the sockets on the bottom of the monitor and attach the base. 3. Push the base toward the front of the monitor until it stops.
Setting Up the Monitor Remo ving t he Monitor B ase In the e vent that you need to disassemble the base from the monitor , position the monitor bottom side up and follow these instructions: 1. If you must remove the base attachment, release the catch and slide the base to ward the back of the monitor .
Setting Up the Monitor 4. Power on the computer and monitor . ✎ If the monitor fails to function properly , refer to Appendix A, “T roubleshooting. ” 5. If necessary , adjust the front panel monitor controls according to your personal preference.
Setting Up the Monitor Connec ting t he S peak ers (A v ailab le wit h Se lec t Mod els) Se veral speak er models are a v ailable with select monitors. Refer to the steps belo w for the speaker model included with your monitor . T all Speak ers with B ase 1.
Setting Up the Monitor 3. Attach the green connector from the control speaker to the green port on the back of the computer . 4. Attach the speaker power adapter cable to the connector on the back of the control speaker , and then plug the A C adapter into an electrical outlet.
Setting Up the Monitor Shor t Speak ers 1. Place the speaker set near the monitor so that the speaker with the controls is on the right side when you vie w the monitor from the front. 2. Attach the speaker po wer adapter cable to the black connector on the back of the c ontrol speaker , then connect the A C adapter into an electrical wall outlet.
Setting Up the Monitor USB Sp ea k ers 1. Place the speaker set near the monitor so that the speaker with the controls is on the right side when you vie w the monitor from the front. 2. Plug the USB cable 1 on the control speaker into a USB port on the computer .
Setting Up the Monitor P lugging H eadph ones into t he Com puter T o use headphones, if your spea ker does not ha ve a headphone port, plug them into the connector on the back of the computer labeled Out, Line Out or Speaker . Y ou may need to disconnect the speakers to connect the headphones.
4 Opera ting t he Monitor Soft war e and Utiliti es Select monitor models will include a CD that contains two f iles you can install on your computer: ■ an .INF (Information) file ■ an .ICM (Image Color Matching) file Adobe Acrobat Reader is supp lied on this CD and can be installed from the menu.
Oper ating the Monitor work through separate BNC type connectors or through distribution b uffers/box es. Y ou may need to install the .INF file if these conditions are not met. The Imag e Color M atc hing File The .ICM file pro vides accurate color representation.
Operating the Monito r 6. Ensure that the proper resolution and refresh rates appear in the W indows Display control panel. ✎ Y ou may need to install the digitally signed monitor .INF and .ICM files manually from the CD in the e vent of an installation error .
1 2 3 4 Oper ating the Monitor F r ont P anel Co ntr ols Item Icon Nam e Function menu menu Launc hes on -sc reen displa ys and ex its the menus and On -Scr een D isplay . Le ft Adj ustment Mo ve s back war d through men u options or dec r ease s adju stment leve ls.
Operating the Monito r On - Screen Dis play The On-Screen Display (OSD) adjusts the screen image based on your vie wing preferences. T o access the OSD, do the follo wing: 1. If the monitor is not already on, press the power button to turn on the monitor .
Oper ating the Monitor 5. The adjustment windo w displays. Press the Right-Adjustment or Left-Adjustment buttons to increase (Right) or decrease (Left) the le vel of adjustment. 6. Press select to save the ne w adjustment. 7. T o exit the On-Screen Display , press the menu button once.
Operating the Monito r On-Scree n Di spla y Icons and F uncti ons (Continued) Icon Function D escription P incushi on T rapez oid R ight-Adju stment mak es the image sides con vex and L eft -Adju stment mak es the image conca v e .
Oper ating the Monitor Monitor Mess ag es No Sig n a l Me ssage If a No Signal message displays on the monitor screen, check to be sure the video cable is proper ly connected and ensure that the computer is po wered on.
Operating the Monito r Ou t of Fr equen cy R ange M essag e If an Out of Frequency Range message displays on the monitor screen, the video resolution and/or refresh rate are set higher than the le vels the monitor supports. T o change the video resolution or refresh rate on the monitor: 1.
Oper ating the Monitor Using t he Energy Sav er Mode The monitor is designed to meet requirements for reduced power consumption. Using a combinati on of hardware and software functions, this energy-sa ving feature allows the computer to control the monitor’ s po wer consumption and reduce the monitor’ s power state when not in use.
A Tr o u b l e s h o o t i n g Solving Common Probl ems The follo wing table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem P ossib le Cause Solution Sc ree n is blank. P o w er cor d is disconnec ted .
T roubleshooting Problem P ossib le Cause Solution Monitor ma y hav e been move d o r i na dver te nt ly bumped . Pre ss the menu button to acce ss the On -Scr een D isplay . Select Degau ss to acti vate . Hew lett-P ack ard suggests y ou not degauss mor e than once w ithin a 30-minute peri od of time .
T roubleshooting Problem P ossib le Cause Solution “No Signal” is display ed on scr een. Monitor v ideo cable is disconnect ed. Connec t the 15-pin monitor v ideo cable to the computer . Be sure that the computer po wer is on. “Out of F requenc y” is display ed on scr een.
Using t he W orl dw ide W eb Before contacting customer services, refer to the support W eb site at: http://www .hp.com/support. Preparing to Call T ec hnical Sup port If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support.
B T ec hnical Spec ifi cations ✎ All performance specifications are pro vided by the component manufacturers. Performance specif ications represent the highest specification of all HP’ s component manufacturers’ typical le vel specifications for performance and actual performance may v ary either higher or lo wer .
T echnical S pec ificatio ns Display R esolutio ns Refre sh Rat es 640 x 480 60 Hz 640 x 480 7 5 Hz 640 x 480 8 5 Hz 72 0 x 4 0 0 7 0 Hz 800 x 600 7 5 Hz 800 x 600 8 5 Hz 10 2 4 x 7 6 8 7 5 Hz 10 2 4 .
T echnical S pec ifi cations Humidity 20% to 80% (non-condensing) Altitude Up to 10, 000 f t ./304 8 meters T CO Requir ements Select models meet T CO’03 MPRII Select models meet MP RII P lug and P .
T echnical S pec ificatio ns m7 05, mx7 05 and FS7 6 00 17 ” f l a t C R T m o n i t o r s Sc ree n Si ze 17” (4 3 cm) visual di agonal Vi e wa ble sc r een si ze 16” ( 41 cm) Dot P itch 0.
T echnical S pec ifi cations Dimensio n (W x H x D) Unpack ed w/at tac hed base 16.2 x 16 .2 x 17 inches (max imum) 410 x 410 x 4 30 mm (max imum) We i g h t 3 8 l b M a x .
T echnical S pec ificatio ns v7 6 50 1 7” fla t CRT monitor Sc ree n Si ze 17”(4 3 cm) visual di agonal Vi e wa ble sc r een si ze 16” ( 40.6 cm) Anti-Glar e Coating Dot P itch 0.
T echnical S pec ifi cations We i g h t 3 8 l b M a x . 17 k g Max. Operating T emperature 5 0 o F to 9 5 o F 10 o C to 3 5 o C Stora ge Tempera ture - 2 2 o F to 140 o F -30 o C to 6 0 o C Humidity 20% to 80% (non-condensing) Altitude Up to 10, 000 f t .
T echnical S pec ificatio ns B–8 User Guide.
C Agen cy R egula tor y No tices F ederal C ommunica tions Comm iss io n No tic e This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Agenc y Regulato ry Notices Modifications The FCC requires the user to be notified that an y changes or modifications made to this de vice that are not expressly approv ed by He wlett Packard Company may v oid the user's authority to operate the equipment.
Agency R egulatory Notices T o identify this product, refer to the Part, Series, or Model number found on the product. Can adian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Agenc y Regulato ry Notices Dispos al of W as te Equip ment b y Users in Priv a te Household in t he E uropean Unio n This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.
Agency R egulatory Notices Ko r e a n N o t i c e P ow er Cord Set Requiremen ts The monitor po wer supply is provided with Automatic Line Switching (ALS).
Agenc y Regulato ry Notices Japan ese P o w e r Cord Requirements For use in Japan, use only the po wer cord receiv ed with this product. Ä CAUTION: Do no t use the po wer cor d recei ved with this pr oduct on any o ther pr oducts .
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) v75 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) v75 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) v75 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) v75 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) v75 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) v75 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) v75 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) v75 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
