Gebruiksaanwijzing /service van het product VC4815 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 31
Service Reference Guide HP Compaq vc4815 Thin Client Document Part Number: 480421-001 Ja nu ary 2008.
© 2008 Hewlett-Packard Development Company, L.P. HP, Hewlett Packard, and the Hewlett-Packard l ogo are trademarks of Hewlett-Packard Company in th e U.S. and o ther countries. Compaq, and the Compaq lo go are trademarks of Hewlett-Packard Development Company, L.
Product Description Network Firmware .......................................................................................................... 1–1 HP Compaq Thin Client vc4815 Series .................................................................
Contents Upload the Flash Image and system BIOS Up lo a d t h e F la sh i ma g e an d BI OS ...........................................................
1 Product Description The HP Compaq Thin Client vc4815 Series are Redflag Linux-based terminals that connect over a n etwork to a serv er where all processing and storage occurs. Because of the nature of the products, troubleshooting is significantly sim pler than on a standard PC and previous thin clients.
Product Description H P C o m p a q T h i n C l i e n t vc4815 S e r i e s Front view - vc4815 1 Power button 3 Flash activity LED 2 Power LED 4 USB ports (2) Service Reference Guide www.
Product Description Product Description H P C o m p a q T h i n C l i e n t vc4815 S e r i e s Rear View of the vc4815 1 PS/2 connectors (2) 5 Power connector 2 Serial connectors (4) 6 Lock Slot 3 Mon.
Product Description Serial Number Location The serial number is displayed on the side of the unit. Connecting USB Equipment USB mouse devices and ke yboards do not require special drivers and are considered to be plug and play peripherals. Certain USB devices such as printers and modems, however, may require special drivers.
Product Description Locating Additional Information The following documentation is available to support these products: Quick Setup Hardware Reference Guide Redflag Linux User manual Customer and Service Notifications, Bulletins and Advisories Quickspecs ✎ Documentation, white papers, and driv ers are subject to change.
2 Spare Parts Lists vc4815 S e r i e s S p a r e P a r t s L i s t The spare p arts tables th at follow provid e a listing of th e spare part s available for the Thin Client vc4815 Series.
3 HP vc4815 Series Setup (F10) Utility U s i n g H P vc4815 S e r i e s S e t u p ( F 1 0 ) U t ility The Setup utility can b e accessed only by turning the computer on or restarting the sy stem. To access the S etup Utility menu, complete the following steps: 1.
HP vc4815 Series Setup (F10) Utility 4. Use the arrow (up and down, or left and right) keys to select the appropriate heading, then press the Enter key. To return to the Setup Utility menu, press the Esc key. 5. To apply and save changes, select Save Setting and Exit Setup.
HP vc4815 Series Setup (F10) Utility vc4815 S e r i e s S e t u p U t ility (Continued) He ad in g Opti on Description System Date Allows you to set the date System Time Allows you to set the time.
HP vc4815 Series Setup (F10) Utility vc4815 S e r i e s S e t u p U t ility (Continued) He ad in g Opti on Description USB Controller Enable/disable U SB controller Integrated Audio Enable/disabl e o .
HP vc4815 Series Setup (F10) Utility HP vc4815 Series Setup (F10) Utility Heading Op tio n Description vc4815 S e r i e s S e t u p U t ility (Continued) He adi ng Option Description Set Supervisor Password Allows you to set and enable the administrative password.
4 Diagnostics and Troubleshooting POST Diagnostic Front Panel LEDs and Audible Codes This section covers the front panel LED codes as well as the audible codes that may occur before or during POST that do not necessarily have an e rror code or text message associat ed with them.
Diagnostic Front Panel LEDs and Audible Codes Possibl e Cause Beeps & LED blink Activity Recommended Action System unable to power on. None System does not power on and LEDs are not flashin g. Press and hold the power button for less th an 4 seconds.
5 Reload Flash Image and BIOS System Requirements To create a recovery devi ce for the purpose of reflashin g or restoring the software image on the ROM, you will need the following: One or more HP Compaq vc4815 Series Thin Clients USB flash device 512MB Compatible USB flash devices (drive keys) are available from www.
Reload image and system BIOS Hainan Image Reloading 1, Download the Image file *.gho from web. 2, Make a DOS Bootable USB flash dr ive(>=512M). Copy th e image file and ghost.exe (ver11.0.1) to the USB flash drive. 3, Boot from the USB device. Run ghost.
6 Thin Client vc4815 Specifications S p e c i f i c a t i o n s - vc4815 S e r i e s I t e m D e s c r i p t i o n Processor VIA C7 1G Hz Chipset VIA CN700 + 82 37R Operating System Redflag Linux (Chi.
S p e c i f i c a t i o n s - vc4815 S e r i e s I t e m D e s c r i p t i o n Flash Memory 512 MB , 1GB, 2GB, Apacer ADMII se ri es 44PIN 180 degree DOM Memory System Memory 512 MB DDR-II SDRAM NOTE:.
I/O ports and connectors Four USB ports (two in front, two in rear), 4 serial, one parallel, one RJ-45, t wo PS/2 Resident Operating System Redflag Linux Session Allocation Managers/Session Brokers HP.
Dimensions H x W x D (approximate) Without stand 235 x 60 x 195 mm Weight (approximate) Without stand 1.9 kg Temperature range on 50° to 104° F (10° to 40° C) Temperature range off -22° to 140° .
Appendix A HP Compaq vc4815 系列串口定义用户指南 HP Compaq vc4815 终端默认具有 4 个串口，分别为串口一、串口二，串口三、 串口四。 定 义 引脚 主口 （串口 .
HP Compaq vc4815 终端默认出厂设置 定 义 引脚 主口 （串口 1 ） 辅口 1 （串口 2 ） 辅口 2 （串口 3 ） （ TTL ） 辅口 3 （串口 4 ） 1 脚 DCD DCD DCD DCD 2 脚 RXD R.
主口（串口 1 ）定义： 定 义 引脚 主口 （串口 1 ） 1 脚 DCD/ +5V 2 脚 RXD 3 脚 TXD 4 脚 DTR/ +12V 5 脚 GND 6 脚 DSR 7 脚 RTS/+12V 8 脚 CTS/RXD （ TTL ） 9 脚 RI/TXD （ TT.
跳线器默认如上图所示 COMA_JP1 ：更改跳线器将其置左 (2 连接 3) ，可为主口（串口 1 ）的 1 脚取＋ 5V COMA_JP2 ：更改跳线器将其置左 (2 连接 3) ，可为主.
辅口 2 （串口 3 ）（ TTL ）定义： 定 义 引脚 辅口 2 （串口 3 ） （ TTL ） 1 脚 +5V / DCD 2 脚 RXD/TXD 3 脚 TXD/RXD 4 脚 NC/DTR 5 脚 GND 6 脚 NC/DSR 7 脚 NC/RTS 8 脚 RXD/.
跳线器默认如上图所示 COMB_JP1 ：更改跳线器将其置右 (2 连接 3) ，可为辅口 2( 串口 3)(TTL) 的 1 脚取 + 5 V COMB_JP2 ：更改跳线器将其置左 (2 连接 3) ，可为.
辅口 1 （串口 2 ）与 辅口 3 （串口 4 ）定义： 定 义 引脚 辅口 1 （串口 2 ） 辅口 3 （串口 4 ） 1 脚 +5V / DCD +5V / DCD 2 脚 RXD RXD 3 脚 TXD TXD 4 脚 DTR/+5V /+12V.
跳线器默认如上图所示 COMC_JP1 ：更改跳线器将其置下 (2 连接 3) ，可为辅口 1 （串口 2 ）的 1 脚取 +5V COMC_JP2 ：更改跳线器将其置下 (2 连接 3) ，可为辅.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) VC4815 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) VC4815 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) VC4815 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) VC4815 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) VC4815 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) VC4815 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) VC4815 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) VC4815 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
