Gebruiksaanwijzing /service van het product WS460c van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 24
HP ProLiant WS460c G6 Workstation Blade 1. Two (2) mezzanine I/O expansion slots 5. Two (2) small form factor (SFF) hot-plug drive bays 2. Internal USB connector 6. Local I/O Connector 3. Twelve (12) DDR3 Registered or Unbuffered DIMM Memory Slots 7. Internal SD card slot 8.
Up to 24GB, using PC3-10600 DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 12 slot Storage Controller : HP Smart Array P410i Controller (RAID 0/1) .
management console. NOTE: ICE-Linux is not supported in the WS460c G6. Operating Systems : Supports following: (Not preinstalled or preloaded) Genuine Microsoft® Windows Vista® Business (32-bit and .
Processor Quad-Core Processors Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3) Intel® Xeon® Processor X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3) Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3) Intel® Xeon® Processor E5540 (2.
Memory Type DDR3 Registered (RDIMM) Standard 2GB (2 x 1GB) UDIMM 4GB (4 x 1GB) UDIMM Maximum (RDIMM) 96GB (12 x 8 GB) for Registered Memory configurations Maximum (UDIMM) 24 GB (12 x 2 GB) for Unbuffered Memory configurations NOTE: Depending on the memory configuration and processor model the memory speed may run at 1333MHz, 1066MHz or 800MHz.
Number of displays Up to two displays Graphics driver Single, unified driver compatible with FX 770M and FX 3600M Integrated Manageability ProLiant Onboard Administrator (powered by the Integrated Lig.
Compatible SAN HP ProLiant WS460c G6 workstation blades are optimized for HP StorageWorks MSA, EVA and XP. HP ProLiant 460c G6 server blades are compatible with select 3rd party SANs (please see blade storage page for more details: http://h18000.www1.
Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
FX 770M graphics preconfigured models HP WS460c G6 E5540 4GB (1P) Dual FX770M (quad display) 580641-B21 HP WS460c G6 E5530 2GB (1P) Single FX770M (dual display) 580640-B21 Processor(s) One of the following depending on model (1) Intel® Xeon® Processor E5540 (2.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
Intel® Xeon® processor HP L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800) BL460c G6 Kit, FIO NOTE: If two processors are desired, select one 513859-L21 and one 513859-B21.
Step 4: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below.
HP Processors Quad-Core Process Option Kits Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3) BL460c G6 Kit 507791-B21 Intel® Xeon® Processor X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3) BL460c G6 Kit 507792-B21 Intel® Xeon® Processor X5550 (2.
HP Hard Drives SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives HP 300GB 3G SAS 10K SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 492620-B21 HP 146GB 3G SAS 15K SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 504062-B21 HP 146GB 3G SAS 10K SFF (2.
HP Remote Access HP Remote Graphics Software (RGS) v5.3.0 NOTE: HP RGS is a licensed software sold separately. Not bundled with HP WS460c G6. NOTE: For remote access to Windows Vista OS on blade, HP RGS version 5.3 or later is required. NOTE: For more information on HP Remote Graphics Software, please find HP Remote Graphics in: http://www.
HP StorageWorks SB40c Storage Blade HP StorageWorks SB40c Storage Blade 411243-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Memory Population Guidelines For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.
95 Watt CPU's are required for 1333MHz DIMM speeds References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
CPU1 CPU2 slot # population order slot # population order Chnl 1 1 D: 1GB DIMM (if 4GB model), 2GB DIMM (if 2GB model) 1 D: empty Chnl 1 2 A: 1GB DIMM 2 A: empty Chnl 2 3 E: 2GB DIMM 3 E: empty Chnl 2.
UDIMM maximum configuration (2 CPU model) 24GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs CPU1 CPU2 slot # population order slot # population order Chnl 1 1 D: 2GB DIMM 1 D: 2GB DIMM Ch.
1-2 2 x SFF SAS Hot Plug Hard Drives Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
System Unit Dimensions (H x W x D) (with bezel) 7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm) Weight (approximate) Maximum (all hard drives and processors installed) 14.20 lb (6.44 kg) Minimum (one hard drive and processor installed) 10.75 lb (4.
http://h18000.www1.hp.com/products/quickspecs/12790_div/ 12790_div.html HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/ 12810_div.html HP Smart Array P410i Controller Disk Drive Interface 3Gb (6Gb Capable) SAS (Serial Attached SCSI) 1.
Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green .
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) WS460c (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) WS460c heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) WS460c vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) WS460c leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) WS460c krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) WS460c bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) WS460c kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) WS460c . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
