Gebruiksaanwijzing /service van het product Computer van de fabrikant HP
Ga naar pagina of 21
Front View: Rear View: 1. CD-ROM Drive 1. PSU fan 2. Power LED 2. PS/2 mouse port 3. Drive Activity LED 3. PS/2 keyboard port 4. Well ventilated chassis design 4. VGA port 5. Full Length Card Retainer 5. Serial port A 6. HDD controller card (Optional) 6.
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-0483ENW.pdf Processor One of the following depending on Model Dual-Core AMD Opteron 1210 (1.
Interfaces Parallel 0 Serial 1 Pointing Device (Mouse, PS2) 1 Graphics 1 Keyboard (PS2) 1 USB 8 total (4 rear, 2 front panel, 2 internal (one for USB Tape connectivity)) NOTE: Internal USB ports are o.
Server Power Cords 12' country specific, lowline NEMA power cord. NOTE: Rack models ship standard with a 12' IEC cable. Most redundant power supply options ship with a 6' country specific power cord. Localized cables included with geographic specific models in other world regions.
Service and Support This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
Step 3: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Options" section below. NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information.
Memory 2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB) 432806-B21 1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB) 432804-B21 512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB) 432803-B21 Optical Drives CD-RW/DVD-ROM Combo Drive Option Kit 331346-B21 48X CD-ROM Option, Carbon 398972-B21 DVD-RW Drive Option Kit 383974-B21 1.
Tape Backup Drives NOTE: Installation of SCSI internal tape drives in a ML115 model requires SCSI controller kit (PN: 374654-B21). NOTE: The SCSI Controller Kit (P/N 374654-B21 cannot be installed in Slot 2 due to proximity to heat sync. NOTE: For complete listing of tape drive offerings see: http://www.
USB Options HP 1GB USB 2.0 Floppy Drive Key 442085-B21 HP 256MB USB 2.0 Floppy Drive Key 442084-B21 HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver) DC172B HP USB 04 Standard Keyboard DT528A#xxx USB 2.
Service and Support Offerings (HP Care Pack Services) Hardware Services 4-Hour On-site Service 13-Hour x 5-Day Coverage, 3 Years U4434E 24-Hour x 7-Day Coverage, 3 Years U4435E Hardware Services Next .
HP ProLiant ML115 Models NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory 512 MB of PC2-5300 DDR2 SDRAM running at 512 MB with ECC capabilities Memory installed (1 x 512 MB SDRAM DIMM).
1 2 3, 4, 5, 6 48x IDE (ATAPI) CD-ROM Removable Media Bays (1.6" each) Four (4) Non-Hot Plug Drive Bays Drive Support Quantity Supported Position Supported Controller Removable Media DVD + CDRW Drive 2 1 or 2 Integrated IDE (ATAPI) DVD-RW Drive 2 1 or 2 Integrated IDE (ATAPI) Hard Drives (SATA Models only) SATA 1.
Tape Drives and D2D Backup System NOTE: A SCSI controller needs to be purchased to operate internal SCSI devices in the SATA Models. NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.
Part Number 416121-001 Spare Kit 419029-001 Operational Input Voltage Range (Vrms) 100 to 127 and 200 to 240 V auto ranging Frequency Range (Nominal) (Hz) 50 to 60 Hz Nominal Input Voltage (Vrms) 100 .
Power ** HP ProLiant ML115 Fully Configured (see ** ) Fully Loaded System output Wattage (W) 370W Fully Loaded System Input Current (A rms) 8A @ 115V, 4A @ 230V Fully Loaded System Thermal (BTU- Hr) 1907BTU Fully Loaded System VA (Volt-Amp) 920 System Leakage with all power supplies loaded (mA) 0.
System Unit Dimensions (HxWxD) (with feet) 14.46 x 6.88 x 16.76 in (36.7 x 17.5 x 42.6 cm) Weight (approximate) 23.15 lb (10.5 kg) Input Requirements (per power supply) Range Input Voltage 100 to 127 .
NHP 72GB 3G SAS 15K 3.5" HDD 431950-B21 72GB 15K Capacity 73,407,856,856 Height 1.0 in (25.4mm) Width 4.0 in. (101.6 mm) Interface SAS Transfer rate synchronous (maximum) 3 Gb/sec Seek time (typical reads, including settling) Single track 0.27 ms Average 3.
4 port Embedded SATA controller SATA Protocol SATA 2, 3Gb/s SATA Ports 4 internal Port transfer rate 1.5 Gb/s total Maximum Capacity up to 2 TB (4 x 500GB non hot plug SATA HDD) RAID Levels Supported .
Embedded NC320i PCIe Gigabit Server Adapter Network Interface 10Base-T/100Base-TX/1000Base-TX Compatibility IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.
Een belangrijk punt na aankoop van elk apparaat HP Computer (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP Computer heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP Computer vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP Computer leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP Computer krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP Computer bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP Computer kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP Computer . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
