Gebruiksaanwijzing /service van het product L1506 15-inch van de fabrikant HP
Ga naar pagina of 60
User G uid e HP L15 06 15” , L17 06 17” , and L19 06 19” F lat P anel Monitor s Doc ument P art Number : 38 9 5 21-001 September 2005 This guide provides information on setting up the monitor , installing dri vers, using the on-screen display menu, troubleshooting and technical specif ications.
© 2005 He wlett-Packard De velopment Company , L.P . HP , Hewlett P ackard, and the Hewlett-P ackard logo are trademarks of He wlett-Packard Company in the U.S. and other countries. Compaq and the Compaq logo are trademarks of He wlett-Packard De velopment Company , L.
Cont ent s 1 Product Features 2 Safety and Maintenance Guidelines Important Safety Information . . . . . . . . . . . . . . . . . . . . . . 2–1 Maintenance Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 Cleaning the Monitor . . .
Con te nt s Optimizing Digital Conversion . . . . . . . . . . . . . . . . . 4–9 Identifying Monitor Conditions . . . . . . . . . . . . . . . . . . . 4–10 Sleep Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10 HP Display LiteSaver .
Cont ent s Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–5 ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . C–5 Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–5 Japanese Power Cord Requirements .
Con te nt s User Gu ide vi.
1 Product Features The Flat Panel Display has an acti v e matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: L1 5 06 Model ■ 15-inch (38.1 cm) vie wable area display . ■ 1024 x 768 resolution, plus fu ll-screen support for lo wer resolutions.
Pr oduct F eature s ■ Compliant with the follo wing regulated specif ications: ❏ EP A ENERGY ST AR ❏ European Union CE Directi ves ❏ Swedish MPR II 1990 ❏ Swedish TCO L1 7 06 Model ■ 17-inch (43.18 cm) vie wable area display .
Pr oduct F eatur es ❏ Swedish MPR II 1990 ❏ Swedish TCO L1 9 06 Model ■ 19-inch (48.3 cm) vie wable area display . ■ 1280 x 1024 nati ve resolution, plus full-screen support for lo wer resolutions. ■ W ide vie wing angle to allow vie w ing from a sitting or standing position, or moving side-to-side.
Pr oduct F eature s ■ Compliant with the follo wing regulated specif ications: ❏ EP A ENERGY ST AR ❏ European Union CE Directi ves ❏ Swedish MPR II 1990 ❏ Swedish TCO 1–4 User Gu ide.
2 Safet y an d M ainten an ce Gu id el i ne s Impor tan t Sa fety Informa tion A po wer cord is included with your monitor . If another cord is used, use only a po wer source and connection appropriate for this monitor .
Safe t y and Maintenance Guidelines Ä CAUT I ON: F or the pro tection o f your mo nitor , as w ell as yo ur compute r , connect all po we r cords f or yo ur computer and its per ipheral de vi ces (su.
Safe t y and Maintenance Guidelines ■ Slots and openings in the cabinet are provided for v entilation. These openings must not be blocked or co vered. Ne ver push objects of any kind into cabinet slots or other openings. ■ Do not drop your monitor or place it on an unstable surface.
Safe t y and Maintenance Guidelines 2–4 User Gu ide.
3 Set tin g U p t h e Monitor T o set up the monitor , ensure that the power is turned of f to the monitor , computer system, and other attached de vices, then follo w the steps below . Installin g t he Monitor P edestal T o install the monitor pedestal: 1.
Setting Up the Monito r 2. Using both hands, position the monitor ov er the pedestal base and press do wn firmly to lock the pedestal base in place. When the base locks, it will make a clicking sound. Mak e sure the pedestal base is securely locked before continuing with the setup.
Setting Up the Monitor Conn ec tin g t he Monitor 1. Place the monitor in a con venient, well-ventilated location near your computer . 2. Connect the monitor signal cable on the back of the monitor to the video connector on the rear panel of the computer .
Setting Up the Monito r 3. Connect one end of the power cable to the back of the monitor , and the other end to an electrical wall outlet. Connec ting the Signal and P o wer C ables 3–4 User Gu ide.
Setting Up the Monitor 4. Adjust the monitor as needed for your comfort using the monitor’ s tilt adjustment capability . T ilting the Monitor 5. Press the power switch to turn on the monitor . Ä CAUT I ON: Burn-in image damage may occ ur on monitors that displa y the same static image on sc reen f or a pr olonged peri od of time .
Setting Up the Monito r Rem o vi n g t h e M o ni to r B a s e Y ou can remov e the monitor base to mount the monitor on a wall, a swing arm, or other mounting f ixture.
Setting Up the Monitor 3. Remo ve the three scre ws 2 as shown in the follo wing illustration. R emov ing the Monitor Base Ä CAUT I ON: Ensur e that the bottom of the monit or base is positi oned o ver a table o r desktop befo re r emov ing the bas e fro m the monitor .
Setting Up the Monito r Ä CAUT I ON: This monitor su pports the VES A industry standard 100mm mounting hole s. T o at tach a thir d part y mounting soluti on to the monitor , fo ur 4mm, 0.7 pit ch, and 10mm lo ng scr ew s ar e r equired (no t pro vi ded with the monitor ) .
4 O peratin g t he Monitor Soft w are an d Utiliti es The monitor includes a CD that contains two f iles you can install on your computer: ■ an .INF (Information) f ile ■ an .ICM (Image Color Matching) f ile Adobe Acrobat Reader is supp lied on this CD and can be installed from the menu.
Oper ating the Monitor work through separate BNC type connectors or through distrib ution buf fers/boxes. Y ou may need to install the .INF f ile if these conditions are not met. The Ima ge C ol or Ma tc hin g File The .ICM f ile provides accurate color representation.
Oper ating the Monitor 6. Ensure that the proper resolution and refresh rates appear in the W indo ws Display control panel. ✎ Y ou may need to install the digitally signed monitor .INF and .ICM f iles manually from the CD in the ev ent of an installation error .
Oper ating the Monitor F ro nt P anel Co ntr ols ‘ Control Func tion 1 Menu Opens , selects or e x its the OSD menu . 2 – ( Minu s button) • Nav igates bac kwar d thr ough the OSD men u and decr ease s adjustmen t le vels . • If the OSD men u is inacti ve , acti vates the a uto adju stment featur e to optimi z e the sc reen image .
Oper ating the Monitor Adjus ting Monitor Set ting s Use the On-Screen Display (OSD) to adjust the screen image based on your vie wing preferences. T o access the OSD, do the follo wing: 1. If the monitor is not already on, press the Po wer switch to turn on the monitor .
Oper ating the Monitor 6. After adjusting the function, select Sav e and Return, or Cancel if you don’ t want to sav e the setting, then select Exit from the Main Menu.
Oper ating the Monitor The Adv anced OSD Menu has up to three sublev els and can be vie wed in one of six av ailable languages. The follo wing table provides the menus and their functions at each le v.
Oper ating the Monitor Adv anced OSD Men u Le v els (Contin u ed) Le v el 1 Le v el 2 Le v el 3 Fa c t o r y Preset Mode Displa y On / Off Selecti on N P o wer - On Statu s On / Off Selectio n N Displ.
Oper ating the Monitor For more precise adjustments, run the Adjustment P attern provided on the CD and use the Clock and Clock Phase controls (accessible from the OSD menu) as described in the follo wing section.
Oper ating the Monitor Id entif ying Monitor C onditions Special messages will appear on the monitor screen when identifying the follo wing monitor conditions: ■ Input Signal Out of Range— Indicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports.
Oper ating the Monitor ■ Set On T ime ■ T imer: On/Of f ■ Sleep No w T o set the timer: 1. Press the Menu button on the monitor front panel to display the Adv anced Menu. 2. Scroll do wn and highlight Management. 3. Press the Menu button to select Management.
Oper ating the Monitor 13. Set the T imer mode to On to activ ate the Sleep T imer settings. 14. When you are finished, select Sa ve and Return to e xit the menu. The f ifth selection, Sleep Now , turns the monitor backlights of f immediately and stays in sleep mode until the next On T ime acti vates or a monitor b utton is pressed.
Oper ating the Monitor 4. Select the follo wing options to configure the HP Display LiteSa ver features: Confi gure Options Func tion Enable Displa y Lit eSa ver Enables the HP Dis play L iteS av er func tions; deselec t to disable the HP Displa y Lite Sav er .
Oper ating the Monitor Confi gure Options Func tion OK St ores the c urr ent settings and minimi z es HP Displa y Lite Sav er to the S ys tem T r ay . Cancel R estor es the pr ev iou s settings and minimi z es HP Displa y Lite Sav er to the S ys tem T r ay .
Oper ating the Monitor C han gin g t he C ol or T em perature 1. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD. 2. Select Advanced Menu to access all options in the Main Menu. 3. Select Color to display the Color T emperature menu.
Oper ating the Monitor 5. T o acti vate a color prof ile for your monitor , you must set it as the Default Monitor Prof ile. Select “sRGB Color Space Prof ile, ” then click Set as Default button.
A Tr o u b l e s h o o t i n g Solving Comm on Problems The follo wing table lists possible problems, the possible cause of each problem, and the recommended solutions. Pr oblem P ossible Cau se Soluti on Scr een i s blank. P ow er cord is disconnec ted.
T r oublesho oting Pr oblem P ossible Cau se Soluti on Image appears blurr ed, indis tinct , or too dark . Br ightness and contr ast ar e too low . Pr ess the Auto A djust bu t ton on the fr ont panel .
T r oubleshoot ing Pr oblem “Out of R ange . Set Monitor to 1280 x 10 2 4 @ 60Hz ” is disp layed on scr e en. P ossible Cau se V ideo re solutio n and/or r efr esh rat e are set higher than w hat yo ur monitor su ppor ts. Solut ion R estart your com p uter and ente r Safe Mode .
T r oublesho oting Pr oblem P ossible Cau se Soluti on The HP Dis play L iteSa ver may no t be compatible w ith your co mputer sys te m . Some notebook computers ar e not compatible and the monitor po w er can not be contr olled. Co nfirm that the HP Displa y L iteS aver is co mpatible with you r syst e m.
T r oubleshoot ing Preparing to call T ec hnical Su ppor t If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support.
T r oublesho oting A–6 User Guid e.
B T ec hni cal S pec ifi ca tions ✎ All performance specif ications are provided by the component manufacturers. Performance specif ications represent the highest specif ication of all HP’ s component manufacturers’ typical le v el specif ications for performance and actual performance may vary either higher or lo wer .
T echnical S pecif icati ons L1 506 Flat P an el Monitor (Contin ued) V er tical R efr esh R ate 50 to 7 6 Hz En vir onmental Re quirements T emperatur e: Operating T emper ature 41 to 9 5 o F 5 to 3 .
T e chni cal Spec ificati ons L1 7 06 Fl at P anel Monitor Displa y 17 . 0 inc h es 4 3 .18 cm Ty p e TFT L CD V iew able Image Si z e 17 . 0 -inch diagonal 4 3 .18 cm Til t - -5 to 30 o Max i mum W ei g ht 10.1 lbs . 4.60 k g (unpac ked) (Unpac ke d) Dimensi ons (include pedes tal) He ight 15 .
T echnical S pecif icati ons L1 7 0 6 Flat P an el Monitor (Contin ued) P o wer C onsumption <3 7 watts typi cal Input T erminal 15-pin D-t ype co nnector w ith cable included .
T e chni cal Spec ificati ons L1 906 Flat P anel Monitor Displa y 19 .0 inc hes 48 .3 c m Ty p e TFT L CD V iew able Image Si z e 19 .0 -inch di agonal 4 8.3 cm Til t - -5 to 30 o Max i mum W ei g ht 11.7 lbs . 5 .3 0 kg (un pack ed) (Unpac ke d) Dimensi ons (includes pede stal) He ight 16 .
T echnical S pecif icati ons L1 906 Flat P anel Monitor (Contin ued) P o wer C onsumption <3 7 watts Input T erminals 15-pin D-t ype co nnector w ith cable included . Recognizing Preset Disp l a y Resolutions The display resolutions listed belo w are the most commonly used modes and are set as factory def aults.
T e chni cal Spec ificati ons Factor y Preset Dis pl ay Modes (C ontinued) Preset Pi xel F ormat Horz Freq (kHz) V ert Freq (Hz) 13 115 2 x 9 00 71.7 7 6.
T echnical S pecif icati ons Energy Sav er F ea ture When the monitor is in its normal operating mode, the monitor uses less than 40 watts of po wer and the Po wer light is green.
C Ag ency Regula tor y No tices F ed eral C ommuni ca tions Com missi on No tice This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Agenc y Regulatory Notices Modifica tions The FCC requires the user to be notif i ed that any changes or modif ications made to this device that are not e xpressly approv ed by He wlett P ackard Company may v oid the user's authority to operate the equipment.
Agency R egulator y Notices T o identify this product, refer to the Part, Series, or Model number found on the product. Ma teri als dis posal This HP product contains the follo wing materials that might require special handling at end-of-life: ■ Mercury in the fluorescent lamp in the display LCD.
Agenc y Regulatory Notices Compliance with these directi ves implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by He wlett-Packard for this product or product family .
Agency R egulator y Notices Japa nese No tice Ko r e a n N o t i c e ENERG Y S T AR C omp li ance Monitors that are marked with the ENERGY ST AR Logo meet the requirements of the U.
Agenc y Regulatory Notices The po wer cord set (flexible cord or wall plug) recei v ed with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a po wer cord for a different country , you should purchase a po wer cord that is approv ed for use in that country .
D L CD Monitor Q ualit y and P ix el P o licy The TFT monitor uses high-precision technology , manufactured according to HP standards, to guarantee trouble-free performance. Ne vertheless, the display may ha ve cosmetic imperfections that appear as small bright or dark spots.
L CD Monitor Quality and P ix el P olicy T o locate defectiv e pixels, the monitor should be vie wed under normal operating conditions, in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (16 in.
Een belangrijk punt na aankoop van elk apparaat HP L1506 15-inch (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP L1506 15-inch heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP L1506 15-inch vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP L1506 15-inch leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP L1506 15-inch krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP L1506 15-inch bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP L1506 15-inch kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP L1506 15-inch . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
