Gebruiksaanwijzing /service van het product IR2000SD van de fabrikant Humax
Ga naar pagina of 29
SD Digital Receiver The default parental contr ol code is 1234. The default installation code is 0000. U ser ’ s Manual IR2000SD.
Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice.
Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. • Warning Indicates a hazardous situation which could result in serious injury. • Caution Indicates a situation which could damage the equipment or other apparatus.
This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY 90-250V a.c., 50/60Hz • Operate this product only from the type of power supply indicated on the marking label.
10.LOCATION • Place the product indoors to avoid exposing it to lightning, rain or sun. • Do not place it near a radiator or heat register. • Do not place naked flames such as lighted candles on or near the product.
Warning ** The mains plug, as a disconnection device, shall remain readily accessible by the user. ** 1. To avoid damage of the power cord or plug; • Do not modify or process the power cord or plug arbitrarily. • Do not bend or twist the power cord.
1. Before Using the Product ................................................. G B 7 1.1 Package Contents ................................................. G B 7 1.2 Front Panel ....................................................... G B 8 1.3 Conditional Access .
! This chapter provides detailed instructions on the product and its accessories. " Please check all package contents before using your product.
$ % Open the right-hand flap on the front panel of the product to expose the card slot. ** 1. STANDBY BUTTON Switches between operation and standby modes. 2. IR SENSOR Receivers the signal from the remote control. 3. MENU BUTTON Displays the main menu.
% ' Although some TV and radio services are free to air, others are available on a subscription basis and can only be enjoyed via a Conditional Access component.
+ % ** 1. LNB IN Connect a satellite antenna cable. 2. AUDIO Use an RCA cable to connect to the TV. 3. VIDEO Use an RCA cable to connect to the TV. 4. USB Port Service Port ** Note: The image shown may differ from the actual product.
+) % STANDBY Switches between operation and standby modes. MUTE Mutes audio. WELCOME Displays the service information. MAIL Displays the mail message. TV/RADIO Switches between TV and radio modes. WIDE Sets the display format.
** ARROW Moves the cursor up, down, left and right. OK Selects a menu or confirms a selection. Displays the channel list while you are watching a programme. BACK Returns to the previous channel. FAV Displays the favourite list. +/- Adjust the audio volume.
!- This chapter describes how to connect your product to the TV with the particular equipments for gaining optimum signal quality. Note: If you encounter any problems setting up your product, please contact your local product distributor.
0 1 1. Connect the power cord of the product to a wall outlet. 2. Power on by pressing the STANDBY button of the remote control or the STANDBY button at the front of the product. ** Inserting Batteries 1. Press the hook upward and lift the battery cover off .
(%% 2 When powering on your product for the first time after purchase, the installation wizard will operate automatically. Tip: The default installation code is 0000 . If you have forgotten your installation code, please contact your local product distributor.
+!% The result of the installation wizard is shown. Select Finish to exit the wizard. (%% 2 .
4! 1550 Press the MENU button to display the menu. %) Select Welcome to contact the broadcasting operator. % 3 Select Channel List to display the channel list. .
1- This chapter describes the basic functions the product provides such as switching channel, volume control and other common features.
.%7 Press the TEXT button. To display the teletext menu, press the MENU button in teletext mode. Select the teletext function you want and press the OK button. # + $ Press the LIST button to display the RSS(Really Simple Syndication) feed for Almajd.
% 3 The channel list will help you find the channel you want to watch quickly and easily. You can access the channel list in several ways. Press the OK button while you are watching a programme. Press the MENU button and select Channel List .
#./ ! The TV guide is an on-screen guide of grid type which displays the programme information of channels in time and date order. You can access the TV guide in several ways. Press the EPG button. Press the MENU button and select TV Guide .
& & In this chapter you can set options for language, parental control, time, video and screen display.
& ; % In this chapter you can edit all channels in the channel list or make changes to the favourite lists of the channels you have chosen. You will be prompted to enter the installation code to access this menu. Note: The default installation code is 0000.
& (%% Installation menu allows you to configure your antenna and search the available TV and radio channels. Software update and default setting are also available in this section. MENU -> Settings -> Installation You will be prompted to enter the password to access this menu.
4!% You can search the channels as the satellite you set. ** 1. Enter the options. Frequency : Enter the frequency of the transponder. Polarisation : Select the polarization of the transponder. Symbol Rate : Enter the symbol rate of the transponder.
& ) ) () The system information is displayed. % ! You can check the signal strength and quality of the searched channels.
*'-- 7 * - Tuner & Channel Input Connector F-Type, IEC 169-24 Frequency Range 950MHz to 2150MHz Signal Level -25dBm to -75dBm LNB Power & Polarisation Vertical : 12.4 ~ 13.7V Horizontal : 17.
Memory Flash Memory 8M B RAM 64 MB EEPROM 8K B Audio/Video In/Out Video CVBS Audio Audio L/R Power Supply Input Voltage AC 90-240 volts, 50/ 60Hz Type SMPS Power Consumption 16W Protection Separate Internal Fuse & Lightning protection Physical Specification Size 260mm x 182mm x 50 mm Weight (Net) 1.
Een belangrijk punt na aankoop van elk apparaat Humax IR2000SD (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Humax IR2000SD heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Humax IR2000SD vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Humax IR2000SD leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Humax IR2000SD krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Humax IR2000SD bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Humax IR2000SD kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Humax IR2000SD . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
